Search results: 80

Sort order

8,127 models

P
PrintablesPjotrStrog

Rugged Multipart Pinecil/TS100/TS80 Case (V2)

Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
26,389
Likes
8,079
Rating
4.95
P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant

Downloads
16,512
Likes
4,050
Rating
4.93
P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Print approx. €10.26–€12.54 excl. taxPreliminary estimate for one variant

Downloads
3,995
Likes
564
Rating
4.83
P
PrintablesFilip Honzárek

Corner Radius Router Template (5-80mm)

Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
3,245
Likes
730
Rating
4.97
P
PrintablesNils Kal

RTX3080 Piggy Bank

Want to save money for the new awesome RTX3080? Here is the perfect piggy bank to keep you motivated! Kikiina asked me to make this design so she could who give this to her boyfriend who is saving money for a RTX3080, so thanks to you for…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
3,017
Likes
709
Rating
4.9

Airbus 380-800

1:200 Desk Model of the Airbus 380-800. The .3MF file contains the parts for the print.

Print approx. €22.44–€27.42 excl. taxPreliminary estimate for one variant

Downloads
1,607
Likes
97
Rating
4.83
P
PrintablesDieHard

Airbus A380 slingshot glider (Only need one elastic band!)

Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
1,329
Likes
211
Rating
4.5
P
PrintablesMartin

Semi Circular Protractor 180 Degree Angle, Ruler Centimetres & Millimetres

Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,154
Likes
81
Rating
5
P
PrintablesLionel SAVOCA

Lockheed Martin F-22 Raptor - 1:80 scale

Passionate about aeronautics, I drew this model because it is one of my favourites plane. Designed in several parts, this model can be printed without difficulty and with very few supports. With this model I introduce a new assembly…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
1,091
Likes
308
Rating
5
P
PrintablesLionel SAVOCA

Lockheed Martin F-117 Nighthawk - 1:80 scale

Passionate about aeronautics, it was for meunthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model with the double slide and lock…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
804
Likes
197
Rating
5
P
Printablesmotey

Timing Belt Pulley GT2 80t 6mm sleeve for 20t pulley

Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/ HINT : Voron moved away from printed Z gears. This is only a makeshift alternative…

Print approx. €1.08–€1.33 excl. taxPreliminary estimate for one variant

Downloads
656
Likes
57
Rating
0
P
PrintablesPeter Farell

80s boom box

80s boom box with cassette and radio. Probably make a cool key chain. Have fun with it. Fixed 1/31/2024 - removed old files.

Print approx. €18.64–€22.78 excl. taxPreliminary estimate for one variant

Downloads
593
Likes
110
Rating
5
P
PrintablesJaroslav Pašek

RC TATRA 805 DVS-8 V MEŘÍTKU 1/10

RC TATRA 805 !! Zjistil jsem že zadní ramena nesedí a bohužel se špatně nahráli, pracuji na opravě chyby, také bohužel nemám čas na zpracování návodu tak přidám alespoň nějaké fotky ze stavby v případě nejasností mě neváhejte informovat.…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
592
Likes
113
Rating
5
P
PrintablesGarage Maker

80x80mm Fan Grid

I decided to design a beautifull fan grid for my minimalist 3D printed fume extractor designed by Rdmmkr. https://www.instructables.com/member/rdmmkr/

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
588
Likes
28
Rating
4.67
P
PrintablesVojtěch

Extreme 80° "Atom 3D" overhang, printed on a Prusa Mk3

Yes, it can be printed on a Prusa Mk3. The folks at Layer One created this model as a marketing stunt for their Atom 3D printer, to show off the qualities of their model cooling solution. A 80° overhang is considered unprintable by many.…

Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant

Downloads
528
Likes
17
Rating
5
P
PrintablesLabfruits

Hager F82N/F82K 40/80mm

Hager mountings 40mm (F82N) / 80mm (F82K), compatible with Hager 80/90 SL

Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
519
Likes
13
Rating
5
P
Printables3DMAC

Vaza dekorace pro kvetinu 180mm

Další dekorační váza z mé dílny, tentokráte lze dovnitř nalít vodu a dát živou květinu. Another decorative vase from my workshop, this time you can pour water inside and put a live flower. Print instructions filament PLA 0.1mm detail…

Print approx. €12.12–€14.81 excl. taxPreliminary estimate for one variant

Downloads
485
Likes
28
Rating
5

Tobii Eyetracker 5 Curved Monitor Mount 1800R - Samsung Odyssey OLED G9 G93SC G95SC

UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
483
Likes
26
Rating
5
P
PrintablesLionel SAVOCA

Lockheed Martin RQ-170 Sentinel - 1:80 scale

Passionate about aeronautics and Civil UAV pilot, it was for me unthinkable to modelize planes without this one I particularly appreciate with his design inspired by B2. Designed in several parts, this model can be printed without…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
470
Likes
47
Rating
4
P
PrintablescoffeeFueledDiy

Roll-Up Rose for Small Print Bed (Prusa Mini+ / 180x180mm)

Sharing these files to make it easier for anyone with a small print bed who wants to make one of these roll-up roses. Overall, the model is scaled down 80% with a minor modification to the thickness of the rose petal part. Follow the same…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
447
Likes
83
Rating
5
P
PrintablesMartin

90 Degree Corner Clamp (80/100mm)

90 Degree 80mm x 18mm x 12mm 90 Degree 100mm x 23mm x 15mm Thank you ;-)

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
432
Likes
58
Rating
5
P
PrintablesTeo_211

Boeing 737-800NG Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
406
Likes
55
Rating
5
P
PrintablesScott Brown

Battery Box for 4 cell 280 AH Lifepo4 Cells

Simple battery box 4 280ah lifepo4 cells. Bottom and sides but no top YET. Hope it eliminates the need for banding cells. Cells are 174mm by 72mm by 207mm tall. Printed on CR6 Max with pla+.

Print approx. €67.47–€82.46 excl. taxPreliminary estimate for one variant

Downloads
391
Likes
26
Rating
0
P
PrintablesCAD-Guy

Cap for Schott bottle with GLS 80 thread

This is a replacement cap for the Schott GLS80 glass bottle. The cap has an one sided dovetail groove, so the O-Ring will keep in the cap. Why one sided? I have first tried a two sided dovetail groof but I had some tightness problems with…

Print approx. €5.49–€6.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
347
Likes
9
Rating
0
P
Printablesmchangcreative

Remix of EIBOS Series X: Easdry Upgrades (for filament spools <80mm wide)

This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
342
Likes
98
Rating
4.71
P
PrintablesJaKeU

Extreme angle 80° overhang test - 8 sides

Presliced gcodes included: MK3S - QUALITY/SPEED; 0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,2 layer height MK4 - STRUCTURAL/SPEED; 0,2 layer height…

Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant

Downloads
336
Likes
49
Rating
5
P
PrintablesAhmed Alsalawi

190E W201 Center console zebrano wood panel plastic buttons support 2016800275,2016802675,20168008,2016800175,2016802475, 2016802475

Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
315
Likes
17
Rating
0
P
PrintablesTperroneDesign

Updated Fans For RTX 3080 Piggy Bank

I love the RTX 3080 Piggy Bank by Nils Kal! I decided to draw new fans that closely match the original 3080 fans. I included STL files, a 3mf file and a gcode file. Share a picture if you print one!

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant

Downloads
299
Likes
68
Rating
4.75
P
Printablesonus

Vertical Stand for HP EliteDesk 800 (G2 - G6)

Another brilliant way to take up even less space on your desk with your hp elitedesk 800! [works on G3 but should work on G2-G6 – lemme know if otherwise] Enjoy! ***Edit*** I've redesigned it from the ground up. it now uses less plastic…

Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant

Downloads
298
Likes
27
Rating
4.75
P
PrintablesSonic_2_1

Prusament Masterspool for 800g Refill

08/2025: Updated 3D models for the screw and the center piece. The screw is now hollow! With this parts you can convert your empty Prusament spool to a Masterspool. I tested several other Prusament to Masterspool adaptors, but none of…

Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant

Downloads
290
Likes
56
Rating
4.13
P
Printablesmnemic

Anno 1800 - Board Game Token Upgrades - Resources and population tokens

Custom-made upgrades for the components for the board game Anno 1800. I sprayed them with some metallic-like coatings to get a nicer sheen on them. For the gold ones tokens I included both an embossed and a debossed version, but I…

Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant

Downloads
288
Likes
49
Rating
5
P
Printablesnhuhoai

Umikot 51mm base for De'Longhi EC680

Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)

Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant

Downloads
285
Likes
30
Rating
5
P
PrintablesLionel SAVOCA

McDonnell Douglas A-12 Avenger II - 1:80 scale

Stealth aircraft project abandoned in 1991 by the US Air Force, I nevertheless particularly appreciate the design of this aircraft and I therefore wanted to modelize it. Designed to simplify printing and assembly, this model was made in 4…

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
40
Rating
5

180 Schild / 180 Sign Darts

Die Größe des Schildes kann je nach Größe des Druckbettes im Slicer skaliert werden. The size of the shield can be scaled depending on the size of the print bed in the slicer.

Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant

Downloads
244
Likes
15
Rating
0
P
PrintablesLionel SAVOCA

Dassault Aviation Mirage 2000 - 1:80 scale

Designed in several parts, this model can be printed without difficulties and with reduced supports. The canopy being designed separately from the main model, it will be easy to print it in a different color. I tried to simplify the 3D…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
231
Likes
35
Rating
0
P
PrintablesHades

Segway Navimow 800

vycentrované použité závitové vložky do plastu M4 , šrouby původní ( v originálním balení jako náhradní s bříty 9 + 9 ks ) použil jsem ASA , určitě by vydržel i z PETG bílá barva na unašeči není vada tisku ani materiálu :-)

Print approx. €7.91–€9.67 excl. taxPreliminary estimate for one variant

Downloads
224
Likes
14
Rating
0
P
PrintablesSound-Maker

Schalterauslöser / Switch Trigger Makita DMP181Z / 180Z

Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
211
Likes
14
Rating
5
P
PrintablesFilcuk

Inline Fan 100mm to 80mm Air Duct Adaptor

An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
203
Likes
22
Rating
4
P
PrintablesMeca Dynamics

RTX 3080ti Msi Ventus 3x shroud 120mm fan mod

Tired of the noise and heat your RTX 3080ti Msi Ventus 3x is making? I designed this custom shroud to let you mount two 120mm fan directly on your gpu rad. I recommend you to undervolt your gpu with this mod to benefit of low noise level…

Print approx. €7.39–€9.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
200
Likes
22
Rating
5
P
PrintablesYevgen Negvey

TempTower 220-265 / 180-225 with .3mf Easy to edit

M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo

Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
196
Likes
2
Rating
5
P
PrintablesSachmer

Stand for HP EliteDesk 800 G8 SFF

I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of…

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant

Downloads
190
Likes
13
Rating
0

Air Hose Adapter / 125mm > 180mm Abluftadapter

Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…

Print approx. €6.69–€8.17 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
22
Rating
5
P
PrintablesDucatici

Caribou MK3S Meanwell RSP-350&320-24 80mm und 92mm Lüfter

Hallo ich wollte mein Meanwell Netzteil leiser haben aber trotzdem die Kühlleistung nicht verlieren. Da wollte ich gleich meinen Noctua NF-R8 benutzen so entschied ich mich für meinen Zaribo dieses Abdeeckung von…

Print approx. €3.35–€4.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
167
Likes
18
Rating
4
P

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
10
Rating
4.5

Leitz 5180 Locher Anschlag

Leitz 5180 Locher Anschlag

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
146
Likes
4
Rating
5
P
Printables_KaszpiR_

Gridfinity base for ANENG AN8008 and AN8009 or similar

About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
143
Likes
22
Rating
5
P
PrintablesLNPprints

VW Grand California 600/680 Sieb - Sinkstrainer Volkswagen

The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
4
Rating
0
P
PrintablesWhistleR

Wallmount for Makita DCG180ZX

For a complet set you need 1 Wall mount for caulking gun 3 tube holder 1 wallmount for push knobs 3 wallmount for nozles Happy printing :D

Print approx. €9.67–€11.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
126
Likes
16
Rating
5
P
PrintablesAlex_P

Indexing / dividing plate (Teilscheibe) for lathe Paulimot PM190-V or Optimum D180x300

The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
15
Rating
0
P
PrintablesDr.Enchanted

Arris Explorer E280 7” drone Rear Back Up Camera with Servo Tilt V2 Available

Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
106
Likes
13
Rating
0
P
Printablesheximcz

Raspberry Pico W - BME680

Box for the gas sensor BME680. Project https://github.com/heximcz/raspberry-pico-mqtt-bme680 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 15% Filament: Design Devil PET-G…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
31
Rating
5
P
Printablesschilling

Schriftzug Vespa P80X / lettering vespa P80X

Im Beispielfoto mit Prusament PETG (0,2mm Schichthöhe) gedruckt. Dieselben Druckeinstellungen sind im angehängten GCode (mit Farbwechsel) enthalten. Eine weitere GCode-Datei ohne Farbwechsel ist auch dabei. Erste Schicht Düse 240°C / Bett…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
102
Likes
7
Rating
0
P
PrintablesJakub Lojkásek

SINGER - Second spool pin #68003702

Replacement for Singer - second spool pin holder (vertical auxiliary spool pin) #68003702 . Printed with PLA and I used supports.

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
13
Rating
5
P
Printablesblunt

Mason Jar Wall Mount - 80mm

1 month update: Still going strong! No catastrophes yet ;) Print on side as shown, no supports. Highly recommend printing with PETG, but if you only have PLA, I've included some notes below. Jar may slide down and rest on brim if heavy…

Print approx. €1.14–€1.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
100
Likes
20
Rating
0
P
PrintablesRazvan Voicu

SimJack Pro Control Box 8040 Mount

8040 extrusion cockpit mount for SimJack Control box. You can print just 1 but 2 work better.

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
8
Rating
0
P
Printablesjeff

Supermicro CSE846 80mm fan adapter

This is an adapter to allow for mounting 80mm 25mm thick fans on the rear of a super micro 846 4u case. I lost my pieces so I designed this to let me mount standard fans.

Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
12
Rating
0
P
Printablesmwalbeck

BME680 Enclosure (Pimoroni board)

This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
5
Rating
0

DIY Servo Tester (for +180deg Servos!!!)

Below I have provided the stl files and ready g-code files tailor-made for Prusa MK4! Print Settings: Nozzle: 0.4mm Layer Height: 0.2mm Infill: 60% Perimeters: 3 No brim or Raft Use Supports (Case.stl, Lid.stl, Knob.stl) Don't Use…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
13
Rating
0
P
PrintablesPlasticPeer

H0 Scale 1980's Danish House

The model only needs support on the load-bearing beam.

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
13
Rating
0
P
PrintablesR.R.

1980 F1 RENAULT RE-20 TURBO

Winner, 1980 Grand Prix of Austria, driven by Jean-Pierre Jabouille Jean-Pierre Jabouille was nearing the end of his Formula One career in 1980, but the popular French driver had paid his dues to the national team, Renault. After enduring…

Print approx. €7.21–€8.81 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
6
Rating
0
P
PrintablesVlackRasberry

DT 770/880/990 Fiio BTR5 Clip

A simple clip similar to the one that comes with the BTR5 to mount directly to your headphones with no drilling required!! The clip simply wraps around the left cup arm and secures to the case with two screws. For this project, you will…

Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
22
Rating
5
P
Printablesbassklampfe

Wall mountable housing for BME-280/SHT21 and similar sensors

This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
9
Rating
0
P
PrintablesStrayCat

Luggage wall bracket for BMW F800 R, S, ST, GT and S1000XR(K49)

Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
7
Rating
0
P
PrintablesDoubleH

Greenworks Pro 80v Air Concentrator

I created this adapter to allow me to better use my blower backpack to air dry my car after washing. It is intended to concentrate the air to provide better drying performance. I recommend printing with the round end down and with…

Print approx. €17.21–€21.04 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
11
Rating
0
P
PrintablesR.R.

F1 1992 Williams-Renault FW14B 480x320

1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…

Print approx. €5.43–€6.63 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
12
Rating
0
P
PrintablesZahy

Saw blade cover stop for Makita DHS680

Saw blade cover stop, for easier cutting with guide rail. Prevents the cover from lowering than the saw table. Be careful and act at your own risk. I take no responsibility for personal injury or destruction of your equipment! Screws…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
12
Rating
5
P
PrintablesMathieu

Askar FMA180 Pulley for EAF

Customized version of https://www.thingiverse.com/thing:16627 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: teeth = 104 profile = 12 motor_shaft = 61…

Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
0
Rating
0
P
PrintablesPGe-10

TP-Link UH720 8040 extrusion mount for simrig - Remix

Changed to fit tp-link UH720 with charging ports on the side

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
6
Rating
0
P
PrintablesMartin

New 180 Semi Circular Protractor Inch

Transparent 180 degree 1 to 5 inch Type: Protractor Size: 150 x 92 x 1.50mm Filament: PLA & PETG Thank you ;-)

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
8
Rating
4
P
Printablesdraeath

Anker PowerCore Plus 26800 Belt Holster

Belt holster for said USB battery. I designed this so that I could use this to power my Vive Pro wireless VR HMD longer than the stock battery. Print instructions Holster is a separate scad file and dimensions can be freely adjusted if…

Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
5
Rating
0
P
PrintablesJiří Novák

Tatra 805 - hasiči

Tisk s podpěrami , na dvě poloviny, výplň 10%, PLA.

Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
9
Rating
0
P
PrintablesSeppel

Anker PowerCore+ 26800 PD holder for IKEA Skadis

This is a holder to attach an Anker PowerCore+ 26800 PD to an IKEA Skadis plate. Nothing very special about it. Printed it myself in PETG. 0.2mm layer height 0.4mm nozzle Filament used: https://amzn.to/3J4QhE3 - awesome material. Prints…

Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
6
Rating
0
P
PrintablesBittikettu

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
5
Rating
0
P
PrintablesDaki3D

Einwegglas Deckel mit Schieber 80mm

Der Deckel geht am Anfang etwas streng, das legt sich mit der Zeit, man muss nur ein paar mal hin und her schieben. Danach kann man es auch mit nur einer Hand verwenden. Was praktisch ist und somit muss das Glas nicht mehr geöffnet…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
12
Rating
0
P
PrintablesAlex_P

Lathe Die Holder for 22mm tail spindle (e.g. for Paulimot PM190-V or Optimum D180x300)

Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
10
Rating
0
P
PrintablesMr. T

Philips SPN7080 Surge Protector Mount

Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
6
Rating
0
P
PrintablesJiří Novák

Tatra 805 - Kačena

Tisk na dvě poloviny, PLA, podpěry, výplň 10%, tryska 0,4.

Print approx. €3.83–€4.69 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
4
Rating
0
P
PrintablesPavel Wojtaszek

Doraz na kleště/ Plier stop to Knipex wire stripping pliers 1262180

Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
13
Rating
3
P
Printablesmichael

Mercedes C180 2011 armrest divider

this is a divider for the original storage in the armrest. to divide the storage compartment en can holder. made for a Mercedes C180 from 2011 w204. Gcode is for printing with 0.15mm layer hight PETG. Print time 1:23 with prusa mk 2.5s i…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
5
Rating
0
P
PrintablesRobert Schiele

Adapter to Install ERSA Soldering Iron RT 80 Into Drill Stand with 43 mm Euro Mount

While there are custom heat set insertion presses, often including a cheap soldering iron it seems like a waste of resources if you already own a high-quality soldering iron or even a soldering station and a drill stand. The only missing…

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
4
Rating
5
P
PrintablesFilcuk

Vent Grate 80mm for a Printer Enclosure

A vent grate for a printer enclosure with a raised edge to make a better seal. Compared to one that arrived with my enclosure, it provides better air flow, and has larger 5mm screw holes. This is part of my Printer Enclosure Ventilation…

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
5
Rating
0
P
PrintablesLe John

Alienware/Dell 280W power supply holder

Outer dimensions : 113.3 x 34.75 x 53 mm Inner dimensions : 105.80 x 27.25 mm

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
1
Rating
0
P
Printablesguennersen

Passap Pfaff Duomatic 80 Nüsschen / Needle 9670-K

EN Replacement needle with part number 9670-K for Passap/Pfaff hand knitting machines. An approx. 2 cm long piece of PTFE tube (outer diameter 4 mm, inner diameter 3 mm) is used for improved thread guidance. DE Ersatz Nüsschen mit der…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
2
Rating
0
P
PrintablesIrgendeintyp

Klaus flush mount distribution box 80x80 (UP-Verteilerkasten) extended cover

An extended cover for Klaus 80x80 flush mount distribution boxes (UP-Verteilerkasten) for when you can't fit all the wiring back inside after making some changes.

Print approx. €3.52–€4.31 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
3
Rating
0
P
PrintablesYBF650

21700 battery to 26650 or 26800 sleeve for Vase mode

Print in Vase mode, no floor layer. Should take only 40-50min in most 0.4mm printers. Might need spacers to work in a 26800 flashlight, I used 4 of the Convoy 26mm spacers for my D4Sv2. Printed using 0.4mm Ender 3 v2 Designed in FreeCAD…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
2
Rating
0
P
PrintablesM.R.

Tapa para frasco de yogurth de 180ml

Se me rompio la tapa de uno de mis frascos de la yogurtera por lo que hice mi primer diseño en Fusion y salio esta tapa de rosca bayoneta de ¼ de giro que calza justo para los frasquitos.

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
1
Rating
0
P
PrintablesJolly

Braun Satin Hair 1 PowerPerfection HD180 Hair Dryer - Level Switch

The plastic switch of my aunt's hair dryer broke, so I did the only thing conceivable to a maker. I designed and printed the part. It took me a few tries to get the dimensions exactly right, but it worked in the end. I printed the part…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
2
Rating
0

Threaded funnel for 800g Silicagel container

EN: The funnel is designed for original 800-gram “Traiva” silicagel container. No supports needed. CZ: Trychtýř je navržen pro originální 800-gramový silikagelový obal značky “Traiva”. Tisknout lze bez použití podpěr.

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
4
Rating
1
P
PrintablesOsfald

UNI-T LM80 LM100 LM120 LM150 laser distance meter tripod mounting holder

I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
5
Rating
5
P
Printablesskoczon

Cover (cap) dvd for Dell Optiplex 7080

If you are using a non-original optical drive in your Dell Optiplex 7080 computer then this cap may be useful. You will need to print 2 pieces. After printing, cut off the support - see photo.

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
2
Rating
5
P
PrintablesLyra

Camlock to Makita DBO180

The connection for the sander starts with 22mm and increases to 24mm. This model follows that increase to give it a good fit. It works nicely for mine. I hope it does the same for others.

Print approx. €2.81–€3.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
5
Rating
0
P
Printablesargoroots

Box for Soldering Iron TS80P and accessories

Glue required. Also some magnets to better hold cover, but not 100% needed.

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
9
Rating
0
P
PrintablesBM

Graduated Turn Table 180mm

Turn table with 10° indication marks with a 0° reference point. Used to take photogrammetry pictures. constructed around a bearing 40/68x15 mm. the base has extra dove-tail cut-ins to receive DIY accessories of your making.

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
6
Rating
0
P
PrintablesPrintyet

Ersatzreifen & Felge für Yardforce MowBest 805

Hier habe ich für den MowBest 805 ein Satz Ersatzreifen erstellt. Die Reifen habe ich mit einem Prusa MK4s und einer MMU3 gedruckt die Felge mit PLAx CF von Nobufil und die Reifen mit TPU. Kann auch komplett aus PETG/PLA gedruckt werden.

Print approx. €16.93–€20.69 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
4
Rating
0
P
PrintablesLord mk3s+

WPL B24 UPGRADE NA 380 MOTOR

MEZIKUS MEZI MOTOR A 2SPEED PŘEVODOVKU, JEDNÁ SE O REDUKCI ABY BYLO MOŽNÉ NAPASOVAT VĚTŠÍ MOTOR. PŘEVODOVKA MUSÍ BÝT OTOČENÁ MOTOREM DOZADU JINAK PŘEKÁŽÍ KABINA. VŠE PASUJE ALE JE TŘEBA SI S TÍM TROŠKU POHRÁT

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
4
Rating
0
P
PrintablesPrzemek Grondek

CX-80 Lubricant adapter for LM10LUU

Adapter for CX-80 for LM10LUU bearings in Prusa Mini/MK3.9/MK4 Printed in PET-G, Layer Height 0.2mm Remix of CX-80 lubricant adapter for LMU08

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
1
Rating
0
P
Printableskubamxbot

Alternativní víčko pro konvici Catler KE 8010

Náhradní víčko pro konvici Catler KE 8010.

Print approx. €2.25–€2.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
0
Rating
0
P
Printables3DRolek

DeLonghi Dedica Tool Holder (EC680/EC685)

DeLonghi Dedica Tool Holder (EC680/EC685) It's covering up the cup tray and make storage space for your coffee essentials. The recess are 52 mm in diameter Tray is for 52 mm mesh disk Printing: Infill 15% geroid layer height 0.3 mm ( to…

Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
4
Rating
0
P
Printablestaeraeyttaejae

Slim 26800 protective case

I took off much of the "unnecessary" stuff around the original model and added slots aroung the body to help with grip. Original model surely protects the battery better but If this case fails there has to be quite extensive damage…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
2
Rating
0
P
Printablesishikawats

80s Cassette Case Ice Scraper

As a child in the 80s, I remember scraping ice off car windows with a broken cassette tape case. This model is a throwback to that era, modeling the general shape of a cassette case half. A silhouette design of a cassette B-side covers…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
16
Rating
0