Search results: addition

Sort order

711 models

P
PrintablesBenoît Lussier

Additionnal parts for Train car for OS-Railways done by Depronized

I designed an axle and bearing to be able to mount the wheels and interface with the bogie sides. I also designed a connecting rod to attach the bogie centre hub with the bogie frame. To mount the wheel on the axle you need to local sand…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
19
Rating
0
P
PrintablesJohn

75375_Millennium Falcon - Some additional parts to make it even nicer.

75375_Millennium Falcon™ Some additional parts to make it even nicer. There is a big gap behind the cockpit which doesnt look very nice. So i designed some parts to close the gap.

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
4
Rating
5
P
PrintablesSD

Babboe Curve Maxi cosi holder additional fixture

https://www.babboe.de/steco-maxi-cosi-halterung?gclid=CjwKCAiA6Y2QBhAtEiwAGHybPVYlBxhpUoC9KER_7yexF3BjJm00NQs3zG07hUOVCG53jbDCAUuelhoClZYQAvD_BwE For the Babboe Curve there is a maxicosi holder that vibrates quite a lot. In the picture…

Print approx. €5.32–€6.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
4
Rating
0
P
PrintablesMATHOBB

Bosch UNEO additional drill holder / doplnkový držiak vrtákov a bitov

UPDATE 16.1.2023 - Na základe referencie používateľa “steve” pridané dva nové modely clipu: len na šesťhranné nádstavce len na SDS Quick nádstavce Doplnkový držiak vrtákov a bitov na mieste umiestnenia brožúr. Potreboval som nejaké…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
6
Rating
5
P
Printableswladi90

additional enclosure guidance (Ikea Lack)

3 mm pane thickness bore for screws with 4 mm diameter

Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
6
Rating
0
P
PrintablesChristian Vick

Klipper Printer Additions 3.0b9.1 - More Than Boring Start-G-Code

Please don't forget to like - I want my Prusameters! 😄 If you update from a previous 3.x beta, make sure to read the Release Notes, contained in the download. If you update from an 2.x release, please read the Setup Guide, contained in…

Downloads
7,551
Likes
719
Rating
4.95
P
Printablesjoescalon

SV07 Plus Slicer Additions

Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus. Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with…

Downloads
2,624
Likes
109
Rating
5
P
PrintablesAviator67

Saturn V - Launch Umbilical Tower (LUT) - Additional Equipment - 1:60 Scale

Please make sure to download the “ All Model Files ” and the “ All Other Files ” zip files so you get all of the .stl's and also the .pdf files that include the instructions and equipment placement drawings. (Link is near the bottom of…

Downloads
2,005
Likes
249
Rating
5
P
Printablespdxlocs

RAK Meshtastic Starter Kit - No Additional Hardware Case

No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective

Downloads
1,940
Likes
223
Rating
4.73
P
PrintablesBea Res

IKEA Skadis Board Side Addition

These Skadis-like plates were designed starting from the Parametric SKADIS Board Generator by Xuis , and added holes and feet. One measures 200mmx180mm, the other measures 180mmx180mm. I needed to add these boards next to the Printable…

Downloads
1,619
Likes
412
Rating
5
P
PrintablesSeemomster

Handcuffs (without additional hardware)

This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…

Downloads
1,470
Likes
180
Rating
4.56
P
PrintablesCoolioiglesias

Savegrabber - open door without touching the handle, press knobs without touching - additional barrier for the coronavirus and other germs

Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…

Downloads
1,276
Likes
63
Rating
4.91
P
PrintablesCodani

Everdell Complete Collection additional insert

Easy to print, no supports or any required. Now added 3 files for small printers.

Downloads
1,015
Likes
100
Rating
4.89
P
Printableslightning101

Lock box with sliding latch - single bed print, no additional components needed.

Lock box with slide style latch. No pins or bolts needed on this one. 3 hour print on bambu p1p. 95grams filament. Tested in ABS, PETG and PLA at only 15% infill. Lock needs to be slid in to one half before locking two main halves…

Downloads
838
Likes
67
Rating
5
P
PrintablesRiverCharlie

Spindle loop addition to Tomas' 100% Printable Clamp (Not only for Nipples! :-)

A very quick remix of one of the parts in Tomas ' 100% Printable Clamp (Not only for Nipples! :-) to add a loop for attaching cord or chains . This is only the spindle part , so please see Tomas' original model for the other 3 parts you…

Downloads
798
Likes
75
Rating
5

Additional lack table bracket

I've put 3 tables on top of each other, for this you'll need an additional set of adapters to fix the extra table. I made a basic set based upon the already existing "regular" brackets. I've added some additional holes such that longer…

Downloads
793
Likes
121
Rating
4.86
P
Printablesfranzernst

Terraforming Mars Big Box – Additional Tiles – Complete Set

Terraforming Mars Big Box – Additional Tiles – Complete Set I have designed some additional tiles for the 3D tiles of the Terraforming Mars Big Box: Cupola City Dawn City Domed Crater Field-Capped City Ganymede Colony Gyropolis Luna…

Downloads
713
Likes
104
Rating
5
P
PrintablesMrToToRo

Ender 5 S1 additional bed support (Updated)

This mod is still in testing. I did not test this mod on the factory head! In the future, I will look into this and fix some parts. I developed this mod because I started noticing Z fluctuations when the bed goes below 100mm from the…

Downloads
614
Likes
136
Rating
5
P
Printablesjchau57

Filament spool winder additional bracket

I noticed that every time I slow down spinning the hand crank the spool lifts up and out of the base. A few other people mentioned this problem as well in the comments. I added this small bracket and problem is solved. I used 2 small M1.5…

Downloads
599
Likes
83
Rating
5
P
PrintablesBuildX

#0059 Additional Toroidal Rotors/Propellers

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to try designing a…

Downloads
583
Likes
59
Rating
5
P
PrintablesDzzD

Additional desiccant cases for Bambu Lab X1 AMS (for unpacked silica gel) with humidity sensor support.

Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of this one , I added caps & humidity sensor support. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less…

Downloads
580
Likes
47
Rating
4.67
P
PrintablesBryce

Mechanical Calculator (Addition & Multiplication!)

🧮 I designed a 3D-printable mechanical calculator that can perform ➕ addition and ✖ multiplication! Available in 2 Styles: 🔢 Basic Version Doesn't need an MMU or Prusa XL. 🐸 Froggy Version Print with multiple colours using the Prusa XL or…

Downloads
552
Likes
262
Rating
0
P
PrintablesGumo Design

Bed leveling tool for Ender-3 S1 (No additional screw version)

I know many friends don't have lots sizes of screws. Therefore I made a screws-free version of this tool. Just print them how I place on face. And it's support free.

Downloads
537
Likes
94
Rating
0
P
Printablesandy0838
18+

The source marked this model as adult content.

Downloads
503
Likes
130
Rating
4.25
P
Printablesanalogicparadox

Bauhaus Tray - Additional Trays

Remix of AndrzejG's model, that features a new "tear" 1x1 tray, the missing split color versions of 2x2, 2x3 and 3x3 trays, and a 1x1 card holder. All tray models are direct modifications of the original 1x2 split model, so everything…

Downloads
502
Likes
326
Rating
5
P
PrintablesR.M Journey

Bambu Lab X1 Gridfinity Base remix without switch cutout plus Bambu branding addition ( still LED lights compatible)

Remix, no top switch cutout and Bambu branding addition. Only right side of the model was modified.

Downloads
495
Likes
145
Rating
5
P
PrintablesJordan

Math Fidget Spinners 5,5 Addition Subtraktion

Introducing a truly exceptional tool for math enthusiasts of all ages: Our 5.5 cm diameter fidget spinners cleverly combine fun and learning! ✨ These spinners encompass all four fundamental arithmetic operations – addition, subtraction,…

Downloads
486
Likes
59
Rating
4.75
P
PrintablesFlotschi

DJI Goggle 2/ DJI Avata additional Headstrap

There are many battery holders for the DJI goggle 2, but I always had the problem that the weight of the battery caused the strap to press hard on my ears. This additional strap holds the goggles in place and distributes the weight. You…

Downloads
485
Likes
96
Rating
5
P
PrintablesLayerForge

Marbelrun Spirale Addition

The spiral is an add-on for my marble run. It can simply be attached on top. This is required and can be obtained via the link below: https://www.printables.com/model/1728016-marbel-run Printing instructions: Supports required (supports…

Downloads
473
Likes
173
Rating
3
P
Printableskinos1

Creality K1 y K1C Elevación de tapa con bisagras y ventilación adicional con corredera. Hinged cover lift and additional ventilation

Elevación con ventilaciones para la K1 con bisagras 9/5/24 Se añadió la parte trasera de la K1, va justo para que no se levante por el movimiento del teflón Para hacer la elevación completa como en la imagen se necesita imprimir : 1…

Downloads
462
Likes
56
Rating
5
P
PrintablesTomek

Cookie Cutter Letters (Alphabet with additional Polish diacritics)

All English and Polish letters as cookie cutters. Based on Aklatanic font (created by me over 20 years ago) with some changes for cookies rigidity. If you need letters for other languages let me know. Print tips: Place it flat on the bed,…

Downloads
455
Likes
73
Rating
5
P
PrintablesNiho

Ikea Detolf additional shelf clips

Summary Displaying a lot of small items in the shelf but they come with only 4 levels. Tried a few existing designs if found them unsatisfactory and decided to redesign them. There are left and right but you can use just one for all 4…

Downloads
439
Likes
41
Rating
4.75
P
PrintablesJimbob

Modular Storage Box - Additional Drawer and Box Configurations

After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…

Downloads
414
Likes
90
Rating
0
P
PrintablesAndreas

Battery beer crate with additional cut-outs to make it easier to insert the batteries.

I just added some cut-outs to the dividers, based on a real beer crate design. This makes it easier to slide the batteries in. Thanks to CAD-Guy for the great design!

Downloads
407
Likes
46
Rating
4.92
P
Printablesc24w

Ender 5 Bed Cable Strain Relief (No Additional Hardware)

A simple and discreet support for the Ender 5 bed cable. No fixings required! Buy me a coffee

Downloads
406
Likes
34
Rating
4.67
P
PrintablesDeus_Sen

Additional bearing for Bambu Lab Filament Spool Switcher & Winder

Es ist nicht notwendig das gesamte Grundgerüst neu zu drucken! Der Halter für das dritte Lager (608) wird einfach direkt neben der Durchführung für die Achse mit der Getriebeschnecke auf der Grundplatte montiert. Dazu muss entsprechend…

Downloads
403
Likes
35
Rating
5
P
Printables63alfred

Tool Rack addition to Prusa Core One Side Storage

Tool Rack addition to Prusa Core One Side Storage. Adds storage for screwdriver and needle nose pliers that come with Core One plus a pair of Diagonal Pliers as well as additional bid storage. Had to Super Glue new rack to side storage to…

Downloads
401
Likes
99
Rating
4
P
PrintablesWesYarber

Drum Mic Clips - Ludwig EPIC Drums (no additional hardware needed)

You should be able to use the existing hardware from your microphone to mount these to these little clips. I have not tested this on other kinds of rims , only on my Ludwig EPIC Funk drum rims. It is likely you will need to remix this to…

Downloads
383
Likes
45
Rating
5
P
PrintablesTimB

Handcuff Key for Realistic Handcuffs (without additional hardware)

The remix version of the realistic handcuffs doesn't have a key, so I made one.

Downloads
370
Likes
15
Rating
0
P
PrintablesDrakousIero

Cable Duct Parametric Additions

This is a sizing remix* of Leon H's "most excellent" Cable Duct Parameteric project. https://www.printables.com/model/824381-cable-duct-parametric To quote him, it is, "This fully parametric cable duct is designed to help you neatly hide…

Downloads
365
Likes
66
Rating
5
P
PrintablesTooMuchESP

servo tester case (no additional parts required)

This is a case for a servo tester. You don't need any extra parts, just the servo tester. It consists of two parts that are snuklie together.

Downloads
358
Likes
35
Rating
4.67
P
PrintablesCarl A

V Slot additions and Junction plates

V-Slots and Junction Plates I took the 20x40 V Slot file posted by FLAVIENK and expanded upon it by making a 20x20, 20x40 (modified), and 20x60 V Slot. I also added some reinforcement internal beams to eliminate the give of the sides. I…

Downloads
356
Likes
52
Rating
5
P
Printablesdmuva

19cm network rack additional mounts

Added few more mounting plates: Intel 7th gen NUC, unscrew front screws and pull into the mount, then screw them back to fix. TP-Link managed switch TL-SG108P(E) mount. Additional plate to mount power bricks and wires.

Downloads
353
Likes
59
Rating
5
P
Printablesnyashi_
18+

The source marked this model as adult content.

Downloads
347
Likes
106
Rating
5
P
PrintablesJBoe

Cable Tag Set - additional symbols

Object description: I made some new symbols based on the cable tag design from Alego. Update 2023-11-02, new symbols added: Drilling Machine Jigsaw Table Saw Chop Saw Hand Circular Saw Flex Compressor Available Cable Tag Symbols here:…

Downloads
334
Likes
92
Rating
5
P
Printablesethereal_sky

Filament Dust Filter (additional 0.1mm Tolerance)

I was having issues getting the hinges to print properly without them fusing together even with modifying flow and resolution on my Ender 3. I added an additonal 0.1mm gap on each side and it seems to print perfectly. Print Settings…

Downloads
333
Likes
30
Rating
5
P
PrintablesDzzD

Additional desiccant cases for Bambu Lab X1 AMS (for unpacked silica gel)

Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less preferably No support Fill with silica gel, preferably with color indicator. Tips :…

Downloads
329
Likes
30
Rating
4.75
P
PrintablesChiral

Ender 3 rear electronics case with additional 40mm fans

This is a remix of a remix. The original idea is from this Remix on thingiverse from vfrman. A rear mounted electronics case for the Ender 3 or Ender 3 pro. It includes space for the following parts: A Raspberry Pi 3B+ The original Ender…

Downloads
319
Likes
92
Rating
4.5
P
PrintablesZach

BattleShip Plus! Additional Ships for Battleship the Board Game

This make includes 5 new ships models for the hi game battleship! (see image attached for compatibility check) Includes 3 Spot Yatch 4 Spot L-Shaped Aircraft Carrier 5 Spot Plus-Shaped Shipthing 4 Spot 2x2 Dock/Raft 3 Long but Diagonally…

Downloads
318
Likes
59
Rating
0
P
Printables3DPrint68

Raspberry Pi 5 case wall mount additional support

The wall mount support has to be screwed directly on the case with 4 M3 x 10 mm screw. Be careful when installing, the screw are fixed directly in the Raspberry card. The support is directly centered in the 4 holes of the case, so it's…

Downloads
316
Likes
19
Rating
5
P
Printablespb-tec

Additional heavy base for original brass heat-set insert tool from atok

This additional heavy base is designed to prevent the original brass heat-set insert tool from tipping over. Print it and fill it with any heavy parts you have lying around (I fixed the inserted screws with wood glue to reduce noise). Use…

Downloads
313
Likes
259
Rating
5
P
PrintablesBombsurace

Additional Pokemon for Prusa Balance Game

Slowly adding low poly pokemon to this size of game piece. Needed some chonky boys to throw balance off!

Downloads
312
Likes
40
Rating
5
P
Printablesqakk

Cable Tag Set - Additional Icons II

The next set of icons :)

Downloads
311
Likes
49
Rating
5
P
PrintablesSmithpl

Mac Mini M4 Stand + additional drive

This is stand for Mac mini M4 to hide additional drive and HUB below Use PLA/PETG/ABS/ASA filament

Downloads
307
Likes
26
Rating
5
P
PrintablesSvanGool

Additional labels for Customized Sanding Sticks

This is an extension of the set introduced by Customized Sanding Sticks with Labels ( Thanks Fuchsr ! ). In order to make the set on the included photo you can e.g. purchase set(s) over here…

Downloads
299
Likes
76
Rating
5

Awesome Filament Spool Rewinder - Addition

Update the Main Spool Spindle to fit different spools.

Downloads
287
Likes
37
Rating
5
P
PrintablesLinus Tech Tips

DIY 15.6" Monitor - Remixed and additional parts

Credit for the original design goes to @Fox_exe, original design here: https://www.thingiverse.com/thing:3668657 Added parts and remixed some other parts to improve things - stand has a better joining mechanism with the ability to bolt it…

Downloads
283
Likes
50
Rating
1
P
PrintablesHarald Geisler

Additional weight for filament spool in the AMS

Zusatzgewicht für Spulen in der AMS. Ich habe das nicht erfunden, das ist aber meine Variante. Ihr kennt das bestimmt, wenn manche Spulen zu leicht werden, fangen diese an zu rutschen. Bis jetzt hatte ich bei Bedarf ein kleines…

Downloads
282
Likes
40
Rating
4.67
P
PrintablesCrazy

Tronxy X5SA Pro Stealthburner Carriage (No Additional Hardware Required)

Instructions on how to install this can be found on the original page . Modified to allow mounting with the stock carriage screws, as well as to provide room for the endstop cable. Also modified the heatset slots where the sensor mounts…

Downloads
279
Likes
36
Rating
5
P
PrintablesKalleKnall

Logitech MEETUP additional Mic ceiling mount

A simple to use ceiling mount for the great Logitech MeetUp mic. Put a hole (~100mm) into the grid ceiling, add the lower part, put the mic in and fix it with the upper part.

Downloads
278
Likes
8
Rating
5
P
Printablesru_di_y

additional parts for VZbot

additional parts for VZbot: -Probe vario mount frontside (right), if you need on left side (like in the picture), please mirrow it in your slicer -Probe vario mount backside -BL-Touch mount for vario mount short (fits to common UHF…

Downloads
277
Likes
25
Rating
5
P
Printablesjcjames_13009

Filament Spool Switcher & Winder Additional Bracket TPU no Screw [REMIX]

Using the Filament Spool Switcher & Winder from Miklos Kiszely I noticed that when reducing speed the spool was lifting up from the spool holder I printed first the Filament spool winder additional bracket from jchau57 but didn't like the…

Downloads
272
Likes
37
Rating
5
P
Printablesmeet

Additional set of alternative Mini Mixing Pads

Additional set of alternative Mini Mixing Pads I really liked the Disposable Mini Mixing Pad model. But I would have liked another arrangement of pads and spatulas. I think the mixing pad can find many different uses. All my variants are…

Downloads
270
Likes
38
Rating
0
P
Printablespepa3205

Additional cooling DEYE 20kW - PWM added

Additional cooling for DEYE 20kW LP . I had to divide the model into several parts due to its size. It is a prototype without speed control for now, then a PWM controller from Aliexpress will be installed later (search for " EGBO DC12V 3A…

Downloads
252
Likes
14
Rating
5
P
PrintablesJohn T

Additional Files for Knitting Loom: Snap-Fit with Row Counter

This is a remix of VladTheInhaler's excellent Knitting Loom: Snap-Fit with Row Counter , to add some pieces they didn't include. My model adds many types of things: XL and Large counter links and the dials to go with them. Updated dials…

Downloads
236
Likes
66
Rating
0
P
PrintablesDanny Hermans

IKEA MALM additional space

An additional storage space that fits the IKEA Malm series. The are 2 STLs, one for each side. Print instructions Category: Organization Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Notes:…

Downloads
235
Likes
99
Rating
5
P
Printableswheelrightmd

Additional Easter Eggs for Giant Lego Wreath

I wanted some additional egg designs for my giant Lego wreath. I created a polka dot pattern and a chevron pattern using the plain egg in OnShape. These eggs will need to be printed with supports just like the original painted eggs.…

Downloads
231
Likes
79
Rating
5
P
PrintablesVendolis

Core One Nozzle holder with additions

I really liked the nozzle holder, but for me the magnet was too weak and I wanted to store the Prusa Nozzle Replacement Tool ( https://www.printables.com/model/1237212-core-one-nozzle-replacement-tool ) and a Nozzle Wrench for the…

Downloads
229
Likes
54
Rating
4.93
P
PrintablesAviator67

Saturn V - Additional Mobile Launch Platform (MLP) Details

I've remixed GTGeo 's files so that you can more accurately represent your MLP if you have already built your Farscape1 LUT.

Downloads
228
Likes
29
Rating
0
P
PrintablesMommel

SV08 Guided Cable Clips additional Eddy USB Clips

If you need to add an extra wire like for the eddy take the 2 hole versions from the original project: https://www.printables.com/model/958211-sv08-guided-cable-clips and add the same amount of the files of this project.

Downloads
223
Likes
27
Rating
5
P
PrintablesGuilhem

Vtech Go! Go! Smart Wheels additional tracks

Additional tracks for Go Go Smart Wheels - Tut Tut Bolides...

Downloads
222
Likes
19
Rating
5
P
PrintablesKliffom

Cable Tag Set additions

I loved the original model, and I wanted to use it for every cable I have in my house. Unfortunately some icons were missing, but the original designer also but a blank template to use, so I designed mine and I'm sharing them with you…

Downloads
217
Likes
28
Rating
4.5
P
Printablesyaqwsx

Elegoo MercuryX Wash & Cure Station for Resin printing additional tank

Elegoo MercuryX Wash&Cure station is a nice device for resin printing. Unfortunately, Elegoo does not sell replacement washing tanks and it is too small for large format printers. This model allows you to turn a common Ikea 365 container…

Downloads
214
Likes
37
Rating
0
P

MAGNET ORGANIZER / REVOLVER (ADDITIONAL FILES - BEARING USING)

ATTENTION! THESE ARE ONLY ADDITIONAL FILES, WHICH I HAVE PACKED INTO A REMIX FOR CLARITY! THE FOLLOWING LINK WILL TAKE YOU TO THE ACTUAL MODEL: https://www.printables.com/de/model/903990-magnet-organizer-magnet-dispenser-magnet-revolver…

Downloads
214
Likes
38
Rating
4.75
P
Printablesrfmarves

Additional thumb keys for ZSA Voyager keyboard

These keycaps are meant to fit the ZSA Voyager keyboard to allow for more thumb keys. The default configuration for the Voyager keyboard only has 2 thumb keys on each side. I found that too limiting, so by eliminating the number row, all…

Downloads
208
Likes
25
Rating
5
P
PrintablesKarmah

Magic The Gathering Deckbox (Stackable) + Additional Lid Options

I prefer concentric infill on the bottom layer and octogram spiral for the top for the lids. The box needs supports, the grid option works well and is easy to remove.

Downloads
206
Likes
37
Rating
0
P
PrintablesXargas

Anycubic Kobra 3 Max - 8-input and 1-output addition

When testing printing with ACE Pro I found that the original extension from https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/8-input-and-1-output-module was not as stable as I was hoping for (without using e.g. metallic tube…

Downloads
203
Likes
24
Rating
0
P
PrintablesMateus Abreu

Additional Ender 2 Pro rails

Additional Ender 2 Pro rails for the aluminum profile under the heated bed - 70mm on the left and 65mm on the right.

Downloads
203
Likes
15
Rating
0
P
PrintablesG28LABS

PTFE Y Splitter - No Additional Couplers Needed!

This is my first ever functional design. I'm definitely not an expert, I'm still learning a lot about 3D modeling and printing, so this was a big practice project for me. It might have some small errors or issues, but it’s working pretty…

Downloads
195
Likes
44
Rating
3
P
PrintablesFabmaszter

Dice Hospital Ambulance with additional numbers

This is a remix of the awesome ambulances by hoguemr. I just added the numbers also on the windshield and made the holes for the dice a little smaller for a tighter fit. Print instructions Printer Brand: Creality Printer: CR-10S Rafts: No…

Downloads
192
Likes
12
Rating
5
P
PrintablesMartin L.

Tacx Neo additional Fan

This thing is to help the internal fan of your Tacx Neo (every edition!) to get rid of the heat. After reading so many complains about overheating Neos I decided to design a fan mount which helps the neo to suck air out of the housing to…

Downloads
190
Likes
15
Rating
0
P
PrintablesScayanite

DryBox (Food Dehydrator) - No Supports, No additional Hardware

This is a Filament Dryer mod for a standard Food Dehydrator Recommended settings: 2 walls above gyroid 10% preferably with 6mm brim Preferably use a Cold Grip Plate like the Biqu Glacier plate No Supports needed All printable in 1 plate…

Downloads
190
Likes
53
Rating
0
P
PrintablesOmnikage91

37mm Ammo Can Insert - Ramset Addition

Keep your supplies organized! Fits an inexpensive Harbor Freight Ammo Can. Let me know your thoughts! Please credit if you spread the file.

Downloads
189
Likes
21
Rating
0
P
PrintablesBeamCase_Design

BeamCase SW - V3.0 additional panel sizes

These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…

Downloads
182
Likes
38
Rating
5
P
PrintablesRobert

Halloween Letterboard additions - 3 witch sisters and the word 'Spell', just for some Hocus Pocus

Its that time of year again. Don't light the black candle or the Sanderson sisters will be back! Just kidding, but who doesn't love a little bit of Hocus Pocus?! Now you can decorate your indoor letter board with the sisters silhouettes…

Downloads
182
Likes
56
Rating
5
P
PrintablesMrKit

N Scale Trucking Company Additional Roofs

Additional roof/ceiling sections, one inside and one outside.

Downloads
182
Likes
27
Rating
0
P
Printablescrashingtardis

Yosemite-Style Brackets - Additional Variants

Variants: 3 Way Joint w/ 4" x 4" post leg 2 Way T Joint w/ 2" x 4" construction Follow the print settings from the original models.

Downloads
181
Likes
79
Rating
0
P
PrintablesDarthKaker

BMW e34 e32 additional gauges box

Box for additional gauges in bmw e34 with place for iPhone 15 pro with induction charger

Downloads
179
Likes
17
Rating
0
P
PrintablesTechnickmods

Little Tikes Story Dream Bookshelf Remix - Additional Height

Added additional height to the top shelf for larger characters

Downloads
178
Likes
15
Rating
5
P
PrintablesPrusapower

Lovesac Power Adapter - Additional Clip Room

Adds more room for you to be able to clip the side of the couch to the base much easier.

Downloads
177
Likes
19
Rating
5
P
Printablesvaxxi

Additional SA keycaps for Logitech G710

Additional SA keycaps for Logitech G710 These are not printed yet, still doing the original SA keycap set. If you get the chance to print these, please drop a comment . 2018-03-22: added R2-4 3u, used for RShift. 2018-03-21: added R3…

Downloads
177
Likes
8
Rating
0
P
PrintablesPanicCarefully

The Black Hornet p2 - an addition to The Black Hornet p1 (soap bubble wand 10cm diameter)

This is “ THE BLACK HORNET p2 ”an addition “ THE BLACK HORNET p1 ” (a bubble wand with approx 10cm diameter) The wand structure consists of four parts ( please refer to the colored picture above): Part One and Part Two - upper ring…

Downloads
176
Likes
35
Rating
4
P
PrintablesICT Avatar

Solder stand with Tip Holder addition (Vacuum Desoldering Pump) UMTAH V3.0

Solder stand with Tip Holder addition (Vacuum Desoldering Pump) Solder stand with Tip Holder files https://www.thingiverse.com/thing:2947275 Plier addition https://www.thingiverse.com/thing:3114598 Print instructions Category: Electronics

Downloads
173
Likes
29
Rating
4.67
P
Printablesppeterka

Lidl Powerfix Pegboard additional additional pegboard tile layer

Yo dawg I herd you like pegboard, so here is a pegboard for your pegboard... Ok, some explanation on why this might still be useful: For example, if you hang longer tools like screwdrivers on the pegboard, they obstruct a lot of valuable…

Downloads
169
Likes
31
Rating
0
P
PrintablesJohny69

MGNZ induction annealer additional parts and addons

Although the original designs are great, after / during the build of my annealer, i found that some of the parts did not quite fit together right or the tolerance were too tight. I also designed some new parts that help out with the…

Downloads
167
Likes
15
Rating
0
P
PrintablespLfuego

Additions to the Small fully-printable modular Vermicomposter

Hello, Worms are happily doing their thing, but the holes in the bottom of the first level are big enough they they keep falling through. Item one is a frame over which I stretched out an old stocking, does a great job of letting the worm…

Downloads
167
Likes
26
Rating
5
P
PrintablesDP

Sky Team - 3D printable upgrade -Addition

Designed the Main Board and Ice Brakes Board for additive manufacturing. The Alarm Box/Board and Intern Box/Board were redesigned to preclude the cardboard game boards. Used spray paint for the colors and finished with clearcoat. Ink Blue…

Downloads
165
Likes
23
Rating
5
P
PrintablesRodrigo Sclosa

TPU Additional Parts for The PickleWhoop (20, 25 & 30)

This includes my parts for this amazing project called The Picklewhoop Frames (20, 25 & 30). Here we have: GoPro Mount for Naked's SMA Antenna with Diversity Mini Immortal T Mount (8 & 10mm heights) Tube Antenna with Diversity Mini…

Downloads
162
Likes
17
Rating
5
P
PrintablesMikael

Safe Dial with additional middle marks

This is a remix of the wonderful model "Safe box - 3 digit combination" by Hugo. The original model is missing ways to quickly see where the numbers 5, 15, 25, 35, 45, 55 are. I wanted to make it easier for my kids to use the safe so I…

Downloads
162
Likes
14
Rating
5
P
PrintablesBorsh

Top spool holder for Creality K1SE/K1C/K1 with additional functionality

This holder was developed based on the experience gained during using of “Creality K1 & K1C top mounted filament spool holder” . Main characteristics of the holder: Quick installation and dismantling of the holder on a 3D printer with…

Downloads
160
Likes
23
Rating
0