Search results: adis

Sort order

10,604 models

P
PrintablesPrintuin

Skadis Mount Collection

First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…

Downloads
43,120
Likes
15,803
Rating
4.81
P
PrintablesJonasTae

IKEA Skadis Wall Mount

Screw: diameter: up to 6mm length: 30mm or more

Downloads
12,456
Likes
3,013
Rating
4.96
P
PrintablesApex23

Ikea Skadis top mounting shelf

Looking for additional storage space and ways to extend the use of the Ikea Skadis organizer? This shelf mounts on top of the Ikea Skadis board and adds 190x 80mm of storage space without loosing the use of the upper holes. 4 shelfs will…

Downloads
2,530
Likes
652
Rating
5
P
PrintablesDaHouzKat

IKEA SKADIS Wall Mount

I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…

Downloads
2,208
Likes
415
Rating
5
P
PrintablesAaronOaks

Ikea Skadis Tweezer Rack

Tweezer rack for Ikea Skadis pegboard system. Multiple slot sizes are included to accommodate different size tweezers. Should be printed with supports for the Skadis hook regions. Remix: I enlarged the original model to fit the larger…

Downloads
2,077
Likes
418
Rating
4.77
P
Printablesfoxontherun

Skadis - Skådis - Ruler peg

A plate with a peg to hang a ruler off. Or anything else that fits on a 5.5mm peg! I modeled the base on the caliper holder by Synthetic_Future, which in turn is based on Brian.Kuos model. After trying out a couple of different…

Downloads
1,670
Likes
284
Rating
4.78
P
PrintablesMany24

IKEA Skadis - Hex key holder / Držák na inbusy Wera

Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…

Downloads
1,481
Likes
388
Rating
4.92
P
PrintablesNautilus Forge

IKEA SKADIS - Ratchet / Socket Wrench organizer + tools

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
1,414
Likes
243
Rating
4.55
P
Printablesmnc241

Skadis Tape Measure Holder

This was printed with a 0.6mm nozzle, & 0.35mm layer height.

Downloads
1,368
Likes
241
Rating
4.79
P
Printablesfoxontherun

Skadis / Skådis - Fiskars scissor holder

A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.

Downloads
1,292
Likes
175
Rating
4.85
P
Printablesfoxontherun

Skadis / Skådis - miniature paint holder (Vallejo / Citadel / Pro Acryl)

Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…

Downloads
1,236
Likes
159
Rating
5
P
Printablessteffenbew

IKEA Skadis Cutter / Scissors Holder

Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.

Downloads
1,191
Likes
174
Rating
5
P
PrintablesAdam Prchlík

Filament Spool Holder for IKEA SKADIS - Prusa MINI edition

Origin I reworked original idea from alecs.form because i need to fit the holder on printebed of Prusa MINI. Size is 180mm x 114mm (modeled from scratch using Fusion 360) How to fit them Ikea SKADIS use alternating pattern of pegholes -…

Downloads
1,087
Likes
242
Rating
4.89
P
PrintablesPrintosaurus

Skadis Thermometer / Hygrometer

Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.

Downloads
1,040
Likes
258
Rating
4.81

MMU filament Spool holder Ikea Skadis

Set of spool holders for Prusa MMU upgrade ( or any other printer/situation) were you want to print from your wall. mounted on a Skadis board from Ikea. The bearings and rods I used are all from the Prusa MMU2s Upgrade kit. This design…

Downloads
846
Likes
259
Rating
5
P
Printablesorax

IKEA SKADIS PlayStation DualShock 4 Controller Holder

DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…

Downloads
806
Likes
138
Rating
4.92

Skadis 48x Hex Bit Holder

This organizer holds 4 sets of 12 hex bits. 3 rows are .875" deep for extended length bits, and 1 row is .375" deep for shorter bits. Two model versions are available, with and without labels. I chose to fill them with the following bit…

Downloads
723
Likes
75
Rating
4.8
P
PrintablesTache

Skadis Milwaukee PACKOUT Bin Holders

Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!

Downloads
709
Likes
220
Rating
5
P
PrintablesRaegin

Küpper and Skadis Proxxon Slimline combination wrench holder

Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…

Downloads
652
Likes
273
Rating
0
P
PrintablesKela

Skadis to Kallax Adapter REMIX

print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)

Downloads
480
Likes
100
Rating
5
P
Printableskrisennerd

IKEA Skadis - desoldering pump

Holder for desoldering pump.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…

Downloads
475
Likes
73
Rating
4.75
P
Printablesteslapunk

Wera Tool-Check wall mount or Pegboard holder (IKEA Skadis / Wall Control)

This is a simple holder for your Wera Tool-Check. There is a version for screwing to your wall and one each for IKEA Skadis and Wall Control pegboards available. Prints well in the orientation as it comes from the STL file using PLA with…

Downloads
472
Likes
110
Rating
5
P
PrintablesJRM

Ikea Skadis Wall Mount / montaje pared

Adapter to mount Ikea Skadis directly to the wall with screws and your own screw. I use it to fix the bottom of the board. You will need an M3 nut. Adaptador para montar Ikea Skadis directamente a la pared con tornillos y su propio…

Downloads
416
Likes
81
Rating
4.8
P
PrintablesDFV Tech

Ikea Skadis Hook locking clip.

I designed these small locking clips after getting tired of pegboard hooks falling off every time I grabbed a kitchen appliance. The IKEA pegboard hooks I use are mounted quite loosely and can easily come off the board, so I needed a…

Downloads
399
Likes
104
Rating
5
P
PrintablesLayerCake

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Downloads
397
Likes
98
Rating
5
P
Printablesorax

IKEA SKADIS Stadia Controller Holder

Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…

Downloads
393
Likes
63
Rating
4.78
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Downloads
385
Likes
50
Rating
5
P
PrintablesPacoSebas

Skadis Back Mount for Ikea Bror System

This mount allow the mount of the Skadis panel on the back of a Bror System. It works with M3 inserts. I have seen others systems but I was after a design that is mostly hidden behind the panel. It prints well without supports at .2 mm…

Downloads
382
Likes
156
Rating
5
P
PrintablesBaron

SKADIS hammer holder

Plastic hammer holder Ø 42 mm Holder for Ikea Skadis

Downloads
349
Likes
48
Rating
4.67
P
PrintablesTache

SKADIS Dewalt 20v Battery Holder

This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.

Downloads
318
Likes
46
Rating
5
P
PrintablesW&H

Dnd idea skadis dice holder

Ikea Skadis dice holder. Compatible with RPG dices: d100 d20 d12 d10 d8 d6 d4 There are two versions of this model - with and without D&D logo (see below) Orginal authors: This model is a remix of @Shmoee “ DnD Seven Dice Container with…

Downloads
308
Likes
92
Rating
5
P
PrintablesOtty_Skipper

IKEA Skadis tweezers holder

A simple holder for tweezers that only requires 2 slots in a row.

Downloads
299
Likes
33
Rating
5
P
PrintablesBostra

IKEA Skadis charger holder Parkside 12V

I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…

Downloads
294
Likes
37
Rating
5
P
PrintablesLeathercraftV

IKEA Skadis Knipex Screwdriver

Two precize holders for Knipex screwdrivers Flat and Cross, other types of screwdrivers or other brand might or might not fit in (not tested). Tested screwdrivers Knipex flat sizes: 0,5x3, 0,8x4, 1x5, 1,2x6,5 (982030, 982040, 982055,…

Downloads
273
Likes
62
Rating
5
P
PrintablesMatt-G

Cordless Drill(Hilti) Skadis mount

Printinstructions best to use PET or ABS for strength no need for support Prints with a 0.6mm Nozzle fine as well print Hiltihook 2 times Hiltiholder 1 time you also need 2 T-clips from @ Line Arc Line…

Downloads
254
Likes
35
Rating
5
P
PrintablesDirkHoefle

Logitech Pebble M350 Skadis Storage

Stores a Logitech Pebble M350 on a Skadis system

Downloads
234
Likes
35
Rating
5
P
PrintablesWegBier

Tradfri On/Off Switch Skadis Mount

An IKEA Skadis mount for the Tradfri On/Off Switches. The base plate from the Tradfri switch is screwed onto the Skadis holder with two M3 nuts and bolts, I used M3x6. You could also just use the provided double-sided tape to fix the base…

Downloads
220
Likes
68
Rating
4.67
P
PrintablesMaster2386

IKEA Skadis Holder Zollstock / Meterstab / Folding Ruler

Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…

Downloads
217
Likes
17
Rating
5
P
PrintablesMichal K

Wera Hex-Plus Ikea Skadis Mount

To make it easier to print it, I made the pegs for Skadis separately. You need to print pegs 3x Print Parameters: Resolution: 0.2 Infill: 20% Perimeters: 3-4 Rafts: No Supports: No Material: PETG/Any

Downloads
215
Likes
42
Rating
4.5
P
Printablesfivesixzero

Skadis Holder: Flux Syringe and Pen Holder (uses heat set inserts)

Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…

Downloads
210
Likes
38
Rating
5
P
Printablescodos

Membership-Cards-Holder for Ikea Skadis

A nice storage for all those creditcard-sized membership-cards lying around. Holds up to 10 cards. Printing upside down without supports worked fine. Print Settings Printer: Prusa mini+ Rafts: No Supports: No Resolution: 0.2mm Infill: 20%…

Downloads
206
Likes
28
Rating
4.8
P
Printablesjirom

Nendoroid/Figma Adapter Mount for IKEA Skadis

Two models are available: Square Adapter Mount (Recommended) - Easier to print and does not require any supports. Circular Adapter Mount - Looks better but requires requires additional supports. Printing Instructions Note that depending…

Downloads
203
Likes
56
Rating
0
P
PrintablesMichal K

IKEA Skadis Microflame Burner Holder

Perimeters: 5 Printing upside down No supports needed

Downloads
198
Likes
49
Rating
4.71
P
PrintablesB.Stacey

IKEA Skadis T-Handle Hexkey holder

A metric hex key tool holder. Designed for mounting on the IKEA Skadis wall mount. Bit sizes include 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm. Print settings Print with label side on print bed for best quality labels. This also allows the…

Downloads
183
Likes
25
Rating
4.5
P
PrintablesThePes76

Skadis WD40 Small 100ml Holder

Nozzle 0.4 Resolution 0.2 Support YES Raft NO

Downloads
168
Likes
24
Rating
4.83
P
PrintablesAngel

Deburring tool holder for IKEA Skadis

I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…

Downloads
164
Likes
11
Rating
4
P
Printablesfivesixzero

Skadis Holder: Calipers (uses heat set inserts)

Skadis holder for common calipers, remixed from Printuin's caliper holder in his excellent Skadis Mount Collection to use heat-set inserts for mounting instead of integrated pegs. This model requires M2.5 heat-set inserts, M2.5 screws,…

Downloads
162
Likes
37
Rating
5
P
PrintablesMartinD

SKADIS - holder for "wall mounted storage bins" / Wandhalter für Stapelboxen

Holder for the IKEA SKADIS wall system. Fits in the orinal holes. One holder is for one bin You can place it free on the skadis board

Downloads
159
Likes
38
Rating
5
P
PrintablesWegBier

Skadis holder for Align Hex Screwdriver

A simple holder for the fours Align Hex Screwdrivers HZ024 to have them handy and organized on the IKEA Skadis board. It uses two of the universal hooks ( Skadis_Universal_Hook.stl ) from CSD_Salzburg over at Thingiverse. I designed it in…

Downloads
150
Likes
24
Rating
5
P
Printablesbeanieboi

Unifi U6-Enterprise Skadis Holder

A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…

Downloads
143
Likes
23
Rating
5
P
PrintablesClamikra

Knipex 38,5mm Pliers Holder for Skadis - (Knipex model No. 70 15 110 and 08 05 110)

This is a holder for Knipex pliers for the Ikea skadis pegboard, printed in one part. It fits Knipex model 70 15 110 and Knipex model 08 05 110 I designed this model completely new from scratch, but it is inspired by Aaron s Knipex holder…

Downloads
140
Likes
19
Rating
4.75
P
PrintablesBeezn

PSVR2 wall mount for Ikea Skadis

I needed a place to put my PSVR2 away that helped to keep dust off of the lenses. This model also was made so that I could attach it to my Ikea Skadis board. I'm using 8/32" hardware to mount it as I wanted it to be secure.

Downloads
136
Likes
15
Rating
3
P
PrintablesFeirno

Skadis AC Remote holder-Mitsubishi

simple remote Control holder for the Ikea Skadis wall perferct fit for the Mitsubishi remote.

Downloads
126
Likes
4
Rating
4.5
P
PrintablesDaniel B.

IKEA Skadis light

Add light for your Ikea Skadis. 8 Grams No support needed

Downloads
125
Likes
66
Rating
4.5
P
PrintablesDennis

Floating Nintendo Switch Skadis Holder | No Supports | Under 20g Filament

No need for Supports. I printed it with PLA. I would recommend to print the Twist-Clips with PETG.

Downloads
117
Likes
27
Rating
1
P
PrintablesHouzvicka

Niimbot D110 mount for Ikea Skadis

A IKEA Skadis holder for the Niimbot D110 Label Maker that gives you access to the power button and charging port.

Downloads
114
Likes
15
Rating
5
P
PrintablesTurbopstros

IKEA SKADIS Pocket Knife Hook

IKEA SKADIS Pocket Knife Hook Clip for your pocket clip. Simply clip your pocket knife to this hook / holder. It works for almost anything with the pocket clip, not only knives, but also multitools and flashlights. Tested with following:…

Downloads
112
Likes
27
Rating
5
P
PrintablesSalmoneus

Skadis Wera Bit-Check

Holder using the Skadis peg system for a Wera Bit-Check, tested with 12 bit set. Please comment if you've tried this with other Wera bit sets and so I can update compatibility.

Downloads
111
Likes
17
Rating
5
P
PrintablesExtrude Dude

Knipex Wrench Pliers Holder for Skadis Board

Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…

Downloads
107
Likes
13
Rating
5
P
PrintablesAaronOaks

Ikea Skadis Ryobi 40V Battery Holder

An Ikea Skadis (pegboard) holder for Ryobi 40V batteries. There is also a mount on the side that the charger can be hung on. I designed and tested it with the 4ah battery, but higher capacity batteries should have a similar cross-section…

Downloads
96
Likes
23
Rating
0
P
Printablesdick

Skadis T-Nut mount for Klein Wire Cutter and Stripper

This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…

Downloads
92
Likes
8
Rating
4.67
P
Printablesfivesixzero

Skadis Holder: Hookup Wire Spools, x6 (uses heat set inserts)

Simple Skadis holder for six small hookup wire spools, like the ones included in Adafruit's basic Hook-up Wire Spool Set . This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and an additional 4x M2.5…

Downloads
86
Likes
27
Rating
0
P
PrintablesPrinter4496

IKEA SKADIS Shelf Edge or Whiteboard Mount

Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…

Downloads
78
Likes
5
Rating
0
P
PrintablesSn@il

IKEA Skadis Box 40x90x80

You can find my other Skadis accessories here : https://www.printables.com/@Snil_3994788/collections/3008539

Downloads
78
Likes
11
Rating
5
P
PrintablesTurbopstros

Victorinox Swiss Army Knife Hooks for IKEA SKADIS

Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…

Downloads
69
Likes
20
Rating
5
P
PrintablesPointNemo

Skadis MK3S Steel Sheet Holder (Horizontal Version)

This is a horizontal version of Haymount's vertical holder.

Downloads
68
Likes
13
Rating
0
P
PrintablesZAYn0nDER

IKEA Skadis Nintendo DS / DSi Game Holder

Tired of having no way to neatly store and Display your Nintendo DS / DSi Game Collection ? Then this easy Print is the solution for you. For the whole row you need 4x “DSGameStack” and 2x “DSGameStackshort” Or if you are using my Print…

Downloads
68
Likes
10
Rating
0
P
PrintablesHoenir15

Hue Bridge holder/mount for Ikea Skadis

I redesigned the wall mount for a Philips hue bridge fitting on the IKEA skadis punchwall. I made the walls quite thicker (2mm) to get a more stiff structure. Furthermore I made the skadis hooks a little bit smaller, so they fit more…

Downloads
66
Likes
6
Rating
0
P
PrintablesBoluge

Portafilter Skadis Dock

Portafilter Skadis Dock Before getting started, I’d like to thank @ThatCoffeeNerd for their help and the picture. The Portafilter Skadis Holder is a mount designed to easily attach a portafilter (58mm) to an IKEA Skadis pegboard. Ideal…

Downloads
59
Likes
7
Rating
0

Wolfbox MF50 Skadis nozzle holder

Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s

Downloads
52
Likes
7
Rating
4.5
P
PrintablesOliverP

Microphone Holder for SKADIS Systems

I had the original holder for my microphone break, so I made a SKADIS-based mount for it. The microphone itself is a Hama 21671, but many other microphones share the same standard. The mount uses the same upper parts (clip, screw and nut)…

Downloads
50
Likes
7
Rating
0
P
PrintablesSeppel

Anker PowerCore+ 26800 PD holder for IKEA Skadis

This is a holder to attach an Anker PowerCore+ 26800 PD to an IKEA Skadis plate. Nothing very special about it. Printed it myself in PETG. 0.2mm layer height 0.4mm nozzle Filament used: https://amzn.to/3J4QhE3 - awesome material. Prints…

Downloads
50
Likes
6
Rating
0
P
PrintablesNetApex

Universal Caliper Mount with MegaMount for pegboards and skadis

I have been looking for good pegboard builds to place all my tools in an easily accessible location. Here is the start. I found many different ideas, but I am a fan of having something modular for when I decide that I want to move…

Downloads
49
Likes
8
Rating
5
P
PrintablesHeerozh

Makita 7.2V Screwdrivers TD022D Holder for Skadis (SKÅDIS) Pegboard

* Perpendicular to the Pegboard for easy access and reduced space usage * Clamp Bracket design to prevent it from falling * Strengthened Load-bearing capacity Please glue the parts. *"kitbox holder.3mf" is the holder for the toolbox*…

Downloads
44
Likes
10
Rating
0
P
Printablestino14270

support ebavureur skadis ikea

comme d'autre model de mon compte petit support Ikea skadis pour ébavureur pratique et rapide a faire

Downloads
41
Likes
11
Rating
0
P
PrintablesPhil_plastic

Shokz Open Run Ikea Skadis

Halterung für Shoks OPen Run und Ikea Skadis

Downloads
40
Likes
4
Rating
0
P
PrintablesScared__Bunny

Bernina XL Spool Skadis Holder

Takes about 5 XL Bernina Spools and is for the Skadis System. Print with some support, and I used a modifier to increase the strength and maybe the lifetime. I printed in simple PLA, Petg and abs etc. should also work.

Downloads
38
Likes
9
Rating
0
P
PrintablesApex23

Ikea Skadis Desoldering pump (21 mm diameter) holder with container

This design exists of 2 parts, the holder and a container to collect solder falling out the pump. See also my other designs for more ways to Organize your tools on the Skadis board.

Downloads
36
Likes
4
Rating
0
P
Printablestino14270

support skadis pour outils

support skadis Ikea pour petit tourne vis scalpel lame cutter pince boite

Downloads
34
Likes
3
Rating
0
P
Printablesdick

Skadis T-Nut mount for Molex Hand Crimp Tool

This is a mount for holding a Molex Hand Crimp Tool on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports are…

Downloads
30
Likes
5
Rating
0
P
PrintablesJothejecker

Ducros/Fuchs box holder to fix on Ikea Skadis Pegboard

English version : Hi everyone, I've made this little print to avoid to trash Ducros/Fuchs (here in France but maybe other name in different country) Pepper or Spices boxes and use it as tool holder. After buying my skadis, I've try to do…

Downloads
28
Likes
4
Rating
0
P
PrintablesMnemorath

Benchy mount for Skadis w/ Swatch holder

I couldn't find a good Benchy mount for Skadis that I could have a Swatch Card with, so I made one by combining a few designs. I liked the card design of Filament Swatch Remix by Yimir especially since it includes an editable file that I…

Downloads
26
Likes
1
Rating
0
P
PrintablesClamikra

Ikea Skadis Wera 950 Hex Plus (1,5-5mm) keys magnetic mount

I needed only the small Wera Hex keys from 1,5 up to 5mm. So I remixed the model by jcq . Furthermore I had not the described magnets and thus had to adjust the magnets holes to 8x3mm an 5x2mm. Finally the hooks did not fit through my…

Downloads
25
Likes
6
Rating
0
P
PrintablesBlueThunder05

Paradise GL22627BK Light Housing

The injection molded plastic housing that comes with the Paradise GL22627BK Landscape Pathway Light typically cracks/falls apart after 1-2 years. I modeled a replacement with the main difference from the original is I used external fuzzy…

Downloads
25
Likes
3
Rating
0
P
PrintablesLex

Skadis: Grandma's Favorite Filament Clip Storage

Organize your workspace with this Ikea Skadis storage solution for Grandma's Favorite Filament Clips by Extrutim. The original holds up to 8 filament clips , and if you need more, there's an XL version that can hold up to 12 clips . It's…

Downloads
24
Likes
6
Rating
0
P
Printablesannki

Ikea Skadis Decoration Pride & Bi Rainbow

For Ikeas Skadis here is a small decorative Pin/Insert in a rainbow form, either the pride flag or the bisexual flag or any other three striped flag. Because I don’t have access to multiple colors of filament or a printer to use multiple…

Downloads
23
Likes
15
Rating
0
P
PrintablesTekk_45

Paint Tube Holder Skadis (Liquitex 22ml)

Was looking for a holder to organize some paint tubes. This one ended up working out great. No glue needed, it fits snug inside the bin. Holds the tubes very well. I was even able to turn it a bit past 90 degrees vertical and the tubes…

Downloads
21
Likes
2
Rating
0
P
PrintablesW&H

Ikea skadis big dice (d6) holder

Big d6 dice holder for Ikea Skadis. Max length and width of dice: 27 mm. Supports: Yes, for Skadis attachment Filament: In my case Prusament PLA Vanilla white

Downloads
21
Likes
6
Rating
0
P
Printablestino14270

support outillage skadis Ikea

support skadis pour ranger tous plein de petit matériel

Downloads
21
Likes
4
Rating
0
P
PrintablesMaWoKo_3D_Druck

IKEA Skadis Nozzel Halter

Halter für Ikea Skadis Wand damit die Nozzeln schön aufgeräumt sind über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Downloads
19
Likes
4
Rating
0
P
PrintablesKarlIRL

Anker PowerCore 13000 Skadis holder

IKEA Skadis holder for Anker PowerCore 13000. Only the upper two hooks needs support.

Downloads
19
Likes
4
Rating
0
P
PrintablesMiquel

Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK)

Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…

Downloads
18
Likes
3
Rating
5
P
PrintablesdarthGinger

GFCI Outlet Tester Ikea Skadis Mount

Klein Tools RT250 GFCI Outlet Tester with LCD Display mount for IKEA SKÅDIS. Supports required for the SKÅDIS pegs.

Downloads
13
Likes
1
Rating
0
P
PrintablesMath

Bosch Ratcheting Screwdriver mount for Skadis

Remix for a Bosch Ratcheting Screwdriver (Bit-Ratschenschraubendreher) with 12 bits that attaches to the IKEA Skadis. The through-hole is 10mm in diameter and the body of the mount was stretched in order to accommodate the 40mm diameter…

Downloads
13
Likes
3
Rating
0
P
PrintablesPhil_plastic

Halterung Shokz Open Move Ikea Skadis

Halterung mit Ladeanschluss für USB C Kabel

Downloads
11
Likes
1
Rating
0
P
PrintablesPeter

Worker Seagull Skadis mount

Instruction: Separate objects → lay flat → print with support. infill: 15%

Downloads
11
Likes
6
Rating
0
P
PrintablesPeter

Short dart Skadis mount 12x5

instructions: separate objects → set upright → print with organic supports on the skadis hooks only. 15% infill.

Downloads
10
Likes
12
Rating
0
P
Printablesbleep

Skadis Wool Holder for Tufting

This is a bracket plug which enables storage of wool for tufting. It requires a short 160mm diameter 14mm dowel insert. The mounting pins should be glued in with superglue. The dowel insert is roughly 14mm, a loose fit as I found the…

Downloads
9
Likes
6
Rating
0
P
PrintablesScared__Bunny

Smaragd Donuts Halter Für Ikea Skadis

Meine Frau hatte drei Adventskalender 2024 Bestellt und so wurde sie mit drei Schicken Nähgewichten in MiniDonutform beglückt. Ich habe ihr also sogleich einen Halter für ihre Ikea Skadis Wand desiged und gedruckt. Wenn sie Auch einen…

Downloads
7
Likes
1
Rating
0
P
PrintablesMuchsi

Ikea Skadis Swiss Tools PB53 Holder

The model was printed with Prusa PLA using the default settings. No supports were needed. For optimal adhesion, 5 x 5 mm neodym magnets were used. I used the following:…

Downloads
6
Likes
0
Rating
0