Search results: apto

Sort order

Counting matching models…

P
PrintablesCavedog

Flexi Raptor

A flexible velociraptor! How cool! This is a very flexible (with 19 joints!), print-in-place model I spent a long time designing. A lot of attention to detail is in this model, and a few of the smaller tail links are weak due to their…

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
13,227
Likes
2,325
Rating
4.9
P
PrintablesBurgessG

UPDATE - Vertical Laptop Stand / Take 3!

UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…

Print approx. €5.19–€6.35 excl. taxPreliminary estimate for one variant

Downloads
8,456
Likes
1,086
Rating
4.95
P
PrintablesAlex

Vertical laptop stand

Vertical laptop stand with different options for an inner gap to fit variable thickness. The model is printed in 4 parts to avoid supports and to have nicer surfaces: 2 sides and 2 bottom brackets to hold everything together. Assembly…

Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant

Downloads
7,684
Likes
1,036
Rating
4.86
P
PrintablesCarter

Raspberry Pi 4B Case (SnapTop) fits SenseHat

Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…

Print approx. €4.16–€5.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,193
Likes
400
Rating
4.88
P
PrintablesAndreas W

KUNA laptop stand with 15mm clearance

I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
3,038
Likes
347
Rating
4.84
P
PrintablesHollaDaywalker

SpaceX Raptor Engine

Raptor Engine from SpaceX Starship program. I've been following Starship for some years now, and I've always wanted a Raptor Engine to display. I could not find any on Printables or Thingiverse, so I decided to give it a shot and make my…

Print approx. €6.33–€7.73 excl. taxPreliminary estimate for one variant

Downloads
2,652
Likes
323
Rating
4.95
P
Printables44sunsets

The Observatory: a parametric vertical laptop stand for the M1 Pro/M1 Max MacBook Pro (2021)

I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…

Print approx. €4.50–€5.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,088
Likes
273
Rating
4.95
P
PrintablesMaxx

Mini laptop stand/riser

This is a laptop stand/riser that's ultra portable and easy to print. Tested on Asus G14. Should work for most laptops. Print time about 1:30 h (for the pair) I've printed mine using PLA 0.25mm, 20% infill (default Prusa slicer profile…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
2,013
Likes
194
Rating
4.76
P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
1,988
Likes
239
Rating
4.6
P
Printablesargoroots

Laptop stand (sample)

This is just a sample. Get full model from here . Instructions Gcode files are without top and bottom layers to get this honeycomb look. If You prefer to slice it yourself, then settings are: Perimeters: 3 layers Support material:…

Print approx. €11.24–€13.74 excl. taxPreliminary estimate for one variant

Downloads
1,968
Likes
244
Rating
5
P
PrintablesSteven

Laptop Riser

Laptop riser mounts designed to help increase airflow of a laptop. Able to be used with the screen open or closed. Small and easy to store for on the go. Print instructions Easy to print. Increase instances to QTY 2. Printer: i3 MK3…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
1,660
Likes
192
Rating
4.65
P
PrintablesTeo_211

F-22 Raptor Top Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
1,577
Likes
430
Rating
5
P
PrintablesCarter

Raspberry Pi 3B+ Case (SnapTop) fits SenseHat

This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,447
Likes
106
Rating
4.88
P
PrintablesTeo_211

F-22 Raptor Wall Art Silhouette

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
1,428
Likes
375
Rating
4.92
P
PrintablesTeo_211

F-22 Raptor Angle Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
1,303
Likes
321
Rating
5
P
PrintablesminiShev

Mesh Raptor

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…

Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant

Downloads
1,247
Likes
439
Rating
4.8
P
Printablessternli27

Makita 18V Battery Connector Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
1,086
Likes
109
Rating
5
P
PrintablesBurgessG

UPDATE: Angled Laptop Stand / Exended Support

UPDATE: As with my original stand, I had issues printing this when the two pieces were not placed on the bed in the exactly the same orientation. (The honeycomb infill would ‘move around’ to get a best fit). In that case my support rods…

Print approx. €5.87–€7.17 excl. taxPreliminary estimate for one variant

Downloads
1,064
Likes
109
Rating
5
P
PrintablesMrViddy

Flexi Raptor

great gift for birthdays, Christmas and more! 13 joints

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant

Downloads
1,007
Likes
159
Rating
5
P
PrintablesTeo_211

F-22 Raptor Front Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
671
Likes
226
Rating
5
P
PrintablesIvo Slanina

Samsung T5 SSD Laptop Lid Holder

I recently bought Samsung T5 SSD external drive for video editing. It really annoys me to have this thing laying on my table so I designed simple holder to clip the drive on top of my laptop lid. This version is designed for 9 mm thick…

Print approx. €3.46–€4.22 excl. taxPreliminary estimate for one variant

Downloads
632
Likes
82
Rating
3.67
P
PrintablesHollaDaywalker

SpaceX Raptor Engine Vacuum

Vacuum version of the Raptor Engine from SpaceX Starship program. I've been following Starship for some years now, and I've always wanted a Raptor Engine to display. I could not find any on Printables or Thingiverse, so I decided to give…

Print approx. €11.88–€14.53 excl. taxPreliminary estimate for one variant

Downloads
603
Likes
78
Rating
5
P
PrintablesTomR

12/16 - 16/22 Hose Adaptor

This adaptor allows you to combine two hoses with different diameters (12/16 mm to 16/22 mm), especially in a fish tank. This is useful if your filter has a different water-output than your aquarium inflow. The outer diameter of the…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
448
Likes
65
Rating
5
P
PrintablesTeo_211

Ford F‑150 Raptor Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant

Downloads
446
Likes
71
Rating
5
P
Printablesteabot

Lenovo Latitude 5300 laptop wall hanger

I wanted to get my laptops out of the way (usually piling up on a table somewhere) and so created some fall mount brackets. I needed them to be sturdy, low profile, but also to allow charging when ‘docked’. Print settings: PETG 0.4mm…

Print approx. €7.04–€8.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
401
Likes
39
Rating
5

Prusa Filament Guide 4mm PTFE adaptor Insert

I created this insert because I have a ton of 4mm OD PTFE tubing and I'd like to use the new filament guide on my other printers. -No additional Hardware Needed. -Printing in .2 Layer Height works best, material type shouldn't matter too…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
393
Likes
53
Rating
5

f22 raptor

This is the F22 raptor a stealth fighter of the 5th generation of jets when printing use supports for better quality and it can hold its self up all by its self as well

Print approx. €2.07–€2.52 excl. taxPreliminary estimate for one variant

Downloads
363
Likes
15
Rating
5
P
PrintablesM4trix

F-22 Raptor jet fighter cookie cutter

The perfect cookie cutter for jet fighter enthusiasts, I recommend printing with PLA or PETG and the basic print settings should work fine.

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
35
Rating
5
P
PrintablesCobalt3D

Detailed F-22 Raptor Magnet

Magnet based on the F-22 Raptor. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant

Downloads
305
Likes
34
Rating
5
P
PrintablesLukasz M

Stable Laptop stand for macbook pro 13"

The stand does not interfere with working on a laptop. project with space for slip rubbers. Can be used with laptop case. Sugestion: Infill: 10-15% Honeycomb without top space on sides Inspired by…

Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant

Downloads
247
Likes
29
Rating
5
P
PrintablesAdam

Under Desk Dual Laptop mount

A laptop under desk mount top shelf supports a 28mm laptop and bottom shelf supports a 30mm laptop. Has side cutouts to allow power and USB-C connections.

Print approx. €8.44–€10.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
217
Likes
24
Rating
5
P
PrintablesFilcuk

Inline Fan 100mm to 80mm Air Duct Adaptor

An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
203
Likes
22
Rating
4
P
PrintablesShedblue16

Vertical laptop stand

This is a vertical laptop stand that you can resize in your chosen 3D modelling software.

Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant

Downloads
190
Likes
11
Rating
5
P
PrintablesAverage Joe

Raptor Silhouette

This is a raptor silhouette with a stake to be put in front of a solar spot light to cast a shadow on the side of a house.

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
78
Rating
5
P
PrintablesSuper7

Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac

Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac

Print approx. €4.26–€5.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
24
Rating
0
P
PrintablesJames Bond

Print Bed Scraper Adaptor

Fits multiple different types of print bed scrapers. The scraper should be similar in form to the ones in the pictures. Use the included G-Code, or create your own from the STL file. Happy Printing!

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
26
Rating
0
P
PrintablesHappyPrinter

Laptop Cable Clip

Print in place and no supports needed and in less than 30 min! Print orientation as shown in photo above. The overhang of the hinge is unnoticeable once printed and works perfectly fine without supports. Recommended print settings: 0.4 mm…

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
56
Rating
0
P
PrintablesCeptoRider

Tesla J1772 Adaptor Holder

The original design has a flat mounting surface that will allow hook & loop (Velcro), 3M VHB, or drill for screw/rivet, to attach in a convenient location. I elected to mount via velcro to the interior fabric wall in the rear nook of the…

Print approx. €3.71–€4.53 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
24
Rating
0
P
PrintablesHank

Adjustable, Vertical Laptop Stand

Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports

Print approx. €6.13–€7.50 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
13
Rating
0
P
PrintablesJTEE3D

Parametric Laptop Wall/Under Counter Mount (Fusion 360)

The size can be modified in Fusion 360. It's suitable for laptops and anything else that's flat like a laptop.

Print approx. €2.12–€2.60 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
14
Rating
5
P
Printablesmerakrom

Laptop stand

Stand for two laptops, for storage or use with docking station. One bay is 18mm wide and the other is 24mm wide.

Print approx. €6.31–€7.71 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
12
Rating
1
P
PrintablesButlers3D

RC OneHand Adaptor

Simple RC Car Steering Adaptor for one handed use. Fits directly on to the existing wheel. Designed to work with Spektrum SLT3 transmitter. Recomended Material : PLA Nozzle Diameter : 0.4mm Layer Height : 0.2mm Support : YES In-fill…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
23
Rating
0
P
PrintablesBurgessG

Laptop Stand / Vertical / Stiletto Stand

Hey all, I'm back again, this time with an almost vertical laptop stand. I needed a more vertical stand for my desk so I changed up my standard stand a bit. Takes up a bit less real estate and puts the monitor a few inches higher. I also…

Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
17
Rating
0
P
Printablesjgoep

Digital Microscope to Microphone Arm (Neewer) Adaptor with Hinge

I wanted to make a soldering microscope that is freely positionable over the work. So I modded my generic digital microscope with 35 mm tube. You need 2x(M4 nuts and bolts) and might use some washers for ideal spacing. Please print with…

Print approx. €1.69–€2.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
118
Likes
15
Rating
0
P
PrintablesWolvie

Velociraptor Claws Scratcher

I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…

Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
39
Rating
0
P
Printablescsweichel

Sign: Beware of the Tiny Raptors

A decorative “warning sign” for chicken. I printed this in “Mango Yellow” and “Matte Black” Prusament PETG, and it came out super nice. Simply change the material half-way through the print (see 3mf file). The chicken silhouettes are from…

Print approx. €4.15–€5.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
99
Likes
20
Rating
0
P
PrintablesFlo

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
21
Rating
5
P
Printablesuowxs

Portable Laptop Stand

The newest model is there : Laptop Stand “Air Flow” Designed for prusa MK3s or the printers with same or more printing area. Comfortable to write on and effective at cooling your computer. You can also put a copybook under the computer to…

Print approx. €9.07–€11.09 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
22
Rating
5
P
PrintablesLudi

Kabel Organizer für HP Laptop Netzteil / Cable Organizer for HP Laptop Power Supply

Gedruckt mit extruder PLA NX2 schwarz, 3 Wände, 15% Infill Printed with extruder PLA NX2 black, 3 walls, 15% Infill

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
7
Rating
5
P
PrintablesNina Máčová

Sign: BEWARE: Chickens are raptors

Sign: BEWARE: Chickens are raptors - 20 cm, three colours

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
34
Rating
5
P
PrintablesRado

Parkside PMFAP router round adaptor

As you can see in pictures you can reassemble parts from existing router to this model. Only 1pc. M4 nut is needed to put in during printing at Z=30,5mm and continue printing.

Print approx. €5.28–€6.46 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
33
Rating
0
P
PrintablesFC2M3D

DREAME adaptor for AQUAPUR Attachment (Remix)

I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…

Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
11
Rating
0
P
Printables3DPS

Aeropress Breville Basket 54mm Adaptor (Joepresso style)

I use my Breville dual wall filter basket on my aeropress to give more of an espresso type coffee. Give it a go. You might know this from Joepresso . This is the same thing, but for a 54mm basket and designed to be 3d printed with no…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
77
Likes
11
Rating
0
P
PrintablesTony

Canopy for Ford Raptor

Another accessory for Vit Budina's Ford Raptor. I used snug supports.

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
6
Rating
5
P
PrintablesHellboy383

Go Pro adaptor

Go Pro Mount adaptor to suit Haydn Fiberglass extension pole. The one I used was available at Bunning NZ https://haydn.co.nz/collections/extension-poles/products/professional-extension-pole?variant=35674313490587 Print with 3 perimeters…

Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
11
Rating
0
P
PrintablesPrints&Kinks

@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.

Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…

Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
6
Rating
0
P

Surface Pro 5, Laptop Power Cord Wrap (65W)

Just like the original model. print 2 The model is a snug fit around the adapter. Print Settings Printer Brand: Prusa MK3S+ Rafts: No Supports: No Resolution: .20 MM Speed Infill: 15% Material: Prusament ASA

Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
9
Rating
4
P

Telrad Synta Adaptor

This fills a gap in what is provided by manufacturers for attachments for your telescope. This allows you to attach accessaries like the Synta Solar Finder or a camera to your Telrad base. Printing Print standing on end with the dovetail…

Print approx. €4.15–€5.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
4
Rating
0
P
PrintablesNina Máčová

Sign: CAUTION RAPTORS

Sign: CAUTION RAPTORS 240 mm x 200 mm x 2 mm, three colours

Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
35
Rating
5
P
Printablesmade_for_making

Draper Socket adaptor set holder

Holder for Draper - Socket Adaptor set . After purchasing and realising these would be loose in my work bag, I had to come up with a solution. I chose to execute using cadquery and the cq-editor . To make your own configuration see the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
10
Rating
0
P
Printablesayjay

adaptor Somfy - Busch Jaeger adapter

It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
5
Rating
0
P
Printables3D flare

raptor sign

a funny road sign

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
14
Rating
0
P
Printablesjhaand

Elevated Laptop stand for Thinkpad T490

This laptop stand raises a Lenovo Thinkpad T490 laptop 95 mm. higher above the table. It provides better posture, room for a separate keyboard under your laptop and still makes the whole setup portable. Printed on a Prusa Mini+. Using…

Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
9
Rating
0
P
PrintablesNighthawk

Laptop Riser

Simple 2" High laptop riser for 15" laptop with wide feet to help prevent it from rocking over. Printed on Mk3 with PLA, 0.3 layer height, 4 walls, 25% cubic infill. Printed a previous version at 0.2mm but it doesn't really need that…

Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
7
Rating
0
P
PrintablesXqloz

Double vertical stand for laptop

Double vertical stand for laptop. Thickness 34 and 29 mm. 1h39 on my Kobra 2 Neo No support needed.

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
3
Rating
1
P
Printablesoutlaws42

Laptop Wall Mount

My laptop I am using for my 3D printer is an older, thicker Dell 1420. I couldn't find mounting brackets that allow for a thicker heaver laptop. So I over designed my own. The G code is set to make one of the brackets, but you would need…

Print approx. €4.42–€5.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
4
Rating
0
P
PrintablesAlvomane

SKYRC MC3000 XT60/banana plug adaptor | XT60-/Bananenstecker-Adapter

This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…

Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
11
Rating
4
P
PrintablesHolck

TRINITY2 - SmallHD Ultra5 Monitor Adaptor Plate

A small adaptor plate to mount the SmallHD Ultra5 Monitor to the existing ARRI Trinity2 brackets for the Small HD 503 (K0.0044368) or Transvideo Starlite (K0.0044367). Remove the 4 existing Torx screws from the ARRI bracket to remove the…

Print approx. €2.40–€2.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
13
Rating
0
P
PrintablesG4

Single UK Pattress - 25x16mm trunking cover adaptor

Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
2
Rating
0
P
PrintablesOeschMe

Cupholder adaptor for Volvo FE (Updated to V2)

Pressure fitted adaptor for Volvo fE central console cup holder. I drink from 0,33 (slim) and 0,25 litre cans at work, and those won't stay upright in the original cupholder, so I made adaptor for it. V1 Doesn't fit regular (fat) 0,33 or…

Print approx. €4.79–€5.85 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
1
Rating
0
P
PrintablesHonghong

Cellphone adaptor for 30mm ocular lens for microscope

We bought this microscope 8years ago, it came with a poor ccd with VCR connector. Since the original shop is closed now, I don't know the correct type lens to replace the CCD lens for camera. The most simply way is to add an adaptor with…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
4
Rating
0
P
Printablespt geek

Laptop Under Desk Holder

Simple laptop holder for Asus Rog (model number will be updated)

Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
2
Rating
0
P
Printablesaiber

Bushing for Fleximounts M01 laptop stand

Replacement bushing for the interface between the pole & the gas-spring arm. Ripped dimensions from an original. Category: Replacement Parts

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
2
Rating
0
P
Printablescookiecrook

threaded hose-to-hose adaptor for 1.625" (1⅝") OD hose to a "Shop Nation" hose

Threaded hose adaptor from a common shop vac hose size 1.625" (1⅝", ~41-42mm) OD to a smaller random size 1.5275" (~1 17/32", ~38.8mm). In my case, I needed to go from a smaller hose for this “Shop Nation” miter saw dust adaptor to a more…

Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
4
Rating
0
P
Printableslebalz

Surrounding Strips Replacement for the Surface Laptop Studio

Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
2
Rating
0
P
Printablespictorf

Dynamixel XL320 adaptor for PiCamV2

Bracket adaptor for mounting a PiCam V2 onto a Dynamixel digital servo

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
0
Rating
0
P
PrintablesMatthias

Vacuumcleaner adaptor for black & decker beltsander KA83

To connect your black&decker KA83 to a kärcher vacuum hose (you need my hose adaptor)

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
1
Rating
0
P
PrintablesWerner

Elevated tablet & laptop stand

A tablet and 2-in-1 laptop stand to elevate the device by around 8.5cm. The grooves where the device sits are made extra wide and the supports extra tall to account for said laptops. Honeycomb walls make it look pretty. No hardware for…

Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
0
Rating
0
P
Printablesdradam

Rivian Center console Nacs Adaptor holder Mashup DCFC and A2Z Stellar j1772 plug.

Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.

Print approx. €19.46–€23.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
2
Rating
0

laptop camera blinds

Laptop camera blinds This attachment hangs on your laptop screen and limits the viewing field of the 16:9 camera towards the 4:3 view. If you do not feel to share the 180° of your room during teem meetings. I've used it with HP, ThinkPad…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
2
Rating
0
P
PrintablesGreenSide

VERTICAL LAPTOP STAND

Vertical stand that flexes slightly to accommodate a range of laptop thicknesses.

Print approx. €5.23–€6.39 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
1
Rating
0
P
Printablesjohan ohlson

Pipe adaptor

This is an sort of adaptor that can keep your stuff connected to a pipe. It require a rubber band or a thin rope to be propper attached.

Print approx. €4.97–€6.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
2
Rating
0
P

Vixen Sphinx SX to Omegon Tripod Adaptor Flange

Lets face it, adaptors for telescope mounts and tripods are expensive. I created the first version of this in PLA over 8 years ago and it served me well. I decided to replace the first version with this new 2.1 version for a couple of…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
1
Rating
0
P
Printablesnaxxfish

Ikea HOL Castor Adaptors

Using some cyano glue, some M5 nuts and bolts and these casters you can give your HOL coffee table storage wheels. Can be printed in PLA or PETG. Model contains 4 feet, because, why would you want less than 4 casters on your coffee table?…

Print approx. €3.11–€3.81 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
2
Rating
0
P
PrintablesCharles Clare

NetAlly NXT2000 MAC M2 Laptop Screen holder

This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
2
Rating
0
P
PrintablesCharles Clare

Sonoff Zigbee 3.0 Dongle Plus PC Laptop Screen holder

This is a Holder for the Sonoff Zigbee 3.0 Dongle Plus that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the Sonoff Zigbee 3.0 Dongle Plus with WiFi Explorer Pro. (this one is for a thicker screen)…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
2
Rating
0
P
PrintablesCharles Clare

NetAlly NXT2000 PC Laptop Screen holder

This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with WiFi Explorer Pro. (this one is for a thicker screen) Will print…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
3
Rating
0
P
PrintablesCharles Clare

Sonoff Zigbee 3.0 Dongle Plus MAC M2 Laptop Screen holder

This is a Holder for the Sonoff Zigbee 3.0 Dongle Plus that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the Sonoff Zigbee 3.0 Dongle Plus with WiFi Explorer Pro. Will print without supports.…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
0
Rating
0
P
PrintablesThe Mabur

Laptop Stand

Material: PLA Infill: 10-15% (honeycomb for me) Perimeters: 4-5 No layers top and bottom NOTE ********************* 29/09/2025 Its new companion Cell Stand , made in the same style, will be the new cell phone holder on your desk. For…

Downloads
36,400
Likes
6,157
Rating
4.89
P
PrintablesMartin_au

The Laptop Saver - A sub-desk level drink holder

Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…

Downloads
33,510
Likes
12,970
Rating
4.83
P
Printablesvivamus3d

Portable Laptop Stand

New options: Split versions for small printers and new mid part to improve stability when collapsed (see updates below) Also modern laptops and notebooks get quite hot if standing flat on the desk and the vents have to work harder than…

Downloads
26,532
Likes
2,378
Rating
4.83
P

Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.

Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…

Downloads
16,091
Likes
4,017
Rating
4.88
P
Printablesfinke

Laptop Stand

Inspired by https://www.prusaprinters.org/prints/63523-laptop-stand I created this stand that raises the laptop a bit higher. It is compatible with Prusa Mini and I printed it with Prusament PLA Galaxy Silver with 0.2 layerheight, no top…

Downloads
16,082
Likes
1,862
Rating
4.85
P
PrintablesTomba

Laptop Stand

Check out my profile for the laptop stand V2 with a larger angle. connect version Drill version

Downloads
14,952
Likes
2,130
Rating
4.95
P
PrintablesAdrián Vidal

Laptop stand -Hex-Laptop,Macbook, iPad and e-book Stand-Organizer fully customizable

This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…

Downloads
13,872
Likes
3,018
Rating
4.92
P
PrintablesShapr3D

Parametric Laptop Stand

Fully parametric folding laptop stand designed from scratch in Shapr3D. Set your display size and the model updates automatically; a thickness variable lets you tune looks and material use. Adjustable height via angled notches with a…

Downloads
11,696
Likes
3,039
Rating
3.64
P
PrintablesNakozen

F22 Raptor Kit Card

EDIT: I have added 2 more variants of the kit (looped and un-looped) with the main fuselage flipped round the right way. Should remedy any confusion, but keep in mind the very thin footprint at the rear! The F22 Raptor is a 5th generation…

Downloads
9,542
Likes
1,900
Rating
4.86
P
PrintablesUWcharlie1983

Velociraptor Dinosaur

The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…

Downloads
7,453
Likes
1,130
Rating
4.98
P
PrintablesMiniFlow

Mini Velociraptor – Cute Dino Figurine

📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny Cute mini velociraptor 🦖✨ Part of my mini figurine series – small, detailed,…

Downloads
7,441
Likes
952
Rating
4.88
P
Printablesh3li0

vert · laptop stand

vert vertical laptop stand designed with the 14 inch Macbook Pro, but you can adjust the gap size to meet your demands by scaling only the Y axis it has cutouts on the bottom for 10mm rubber feet update · i've now published separately…

Downloads
6,915
Likes
1,766
Rating
4.78