Search results: arducam

Sort order

162 models

P
Printables6d6178

Arducam B0205 1080P Day & Night Vision USB Camera Case / Enclosure

This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…

Downloads
1,271
Likes
97
Rating
5
P

Arducam OV9281 Case

Case for Arducam OV9281 and similar cameras. It requires 4 4-40x5/8" screws to secure the camera inside the case.

Downloads
648
Likes
12
Rating
5
P
PrintablesJacob Thompson

Arducam Case and Mount for USB Camera Module

I designed this case for an Arducam. I specificall used the B0200 camera ("Arducam 1080P Low Light WDR USB Camera Module for Computer, 2MP 1/2.8” CMOS IMX291 100 Degree Wide Angle Mini UVC Webcam Board with Microphone") Amazon / Arducam…

Downloads
638
Likes
32
Rating
5
P
Printablesashbuilds

ArduCam 16MP Autofocus Camera Case

ArduCam IMX519 https://www.arducam.com/product/imx519-autofocus-camera-module-for-raspberry-pi-arducam-b0371/

Downloads
450
Likes
14
Rating
5
P
PrintablesRoland Deschain

Ender 3 ZAxis Camera Mount for Raspberry Pi Camera V2 (and Arducam IMX519)

Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…

Downloads
449
Likes
35
Rating
5
P
PrintablesSeverusx

Camera Case for Arducam Day-Night Vision for Raspberry Pi Camera

This is a remix of the excellent design from WHerzog to allow the usage of the Arducam Day-Night Vision for Raspberry Pi Camera, Wide Angle Automatic IR-Cut Switching All-Day Image, IR LED for Low Light and Night Vision, OV5647 5MP 1080P…

Downloads
343
Likes
16
Rating
5
P
Printablessliverbaer

Arducam 5MP Wide Angle USB Camera Mount - UB0233

I bought this Arducam 5MP Wide Angle USB UB0233 camera on Amazon, to try out with OctoPrint. I had it wired up with twist ties. I couldn't find a mount specific for it, so I figured I'd make one. There's a Logitech C270 style connector…

Downloads
323
Likes
27
Rating
4.67

Arducam Raspberry Pi Noir Camera Module v2.3 - 8MP IMX219 (RPI-CAM-V2)

3D Model of the Arducam Raspberry Pi Noir Camera Module v2.3 8MP IMX219 linked below. LINK: https://a.co/d/a3vHtyj

Downloads
302
Likes
5
Rating
5
P
Printablesjeronbernal

Voron / 2020 Corner top mount for Arducam 8mp / picam

remixed diyshifts raspicam/arducam mount for the larger 8mp version, added a little voron symbol, widened the hole for the larger lens, aswell as change the bracket mount to make the camera raised a bit, among other QOL addons NOTE: this…

Downloads
274
Likes
44
Rating
0
P
PrintablesDavid Ross

Bambu Labs P1S - Mount for the Arducam IMX708/Raspberry Pi Camera

This is a mount that's designed to house an IMX708/Raspberry Pi camera inside a Bambu Labs P1S 3d printer. I measured it all up with the IMX708m but it should also work with the stock RasPi camera module. Once you've got the video set up…

Downloads
237
Likes
27
Rating
4
P
PrintablesQwertymanzero

arduCam rev E or B0506 cover

It says rev E on the camera. not sure what that means. Anyway, added holes to work with this model. I flipped the spacer and sanded it down so it wouldn't pinch the wire going from the front to the back. not perfect but it works. might…

Downloads
233
Likes
9
Rating
5
P
PrintablesMaHera87

Prusa MK3S (MK3S+) Arducam Autofocus Pi Camera V2.1 Mount mod

Minor modifications to fit the square camera of the Arducam autofocus camera. The lower pins were moved as well by 0.8mm to have the board fit easier into the case.

Downloads
225
Likes
26
Rating
5
P
PrintablesSkeletalPrints

Arducam Mount for 1in Box tube FRC 2877

Here is a link to the CAD: https://cad.onshape.com/documents/c6dbc3d6433bca696258d866/w/54d51c44b96ec7cce082f748/e/0325a5e5995a94b8c2d8da66?renderMode=0&uiState=63e95df58178855d47cc2581 Whole robot CAD:…

Downloads
202
Likes
3
Rating
0
P
PrintablesDana

OpenScan Mini Arducam IMX519 Camera Mount and Back Cover

Version 1.0 Intended Design/Use An alternative Arducam IMX519 mounting system for the OpenScan Mini and a back cover that attaches to it. First, let me start by saying that there is nothing wrong with the original mounting system (a…

Downloads
202
Likes
22
Rating
5
P
PrintablesApproxit

Arducam IMX219 Auto Focus Camera Module cover for Articulating Raspberry Pi Camera Mount

After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…

Downloads
199
Likes
20
Rating
5
P
PrintablesAdjuro

Arducam IMX219 USB camera case for Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

Summary I wanted to use the amazing support from https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m to be able simply to use the Raspberry Pi with an Arducam IMX219 camera module camera as…

Downloads
195
Likes
13
Rating
0
P
PrintablesBuild-a-Printer

Arducam 64MP front case

Changed the size of the lens hole to fit for the Arducam 64MP(https://www.amazon.com/Arducam-High-Resolution-Autofocus-) (WIP- Will upload pictures soon as this is going in my Voron 2.4r2 350^3)

Downloads
180
Likes
5
Rating
5
P
PrintablesSnY

Arducam 16MP Autofocus camera cover for Articulating Raspberry Pi Camera Mount

Quick mod to fit in the Arducam 16MP Autofocus camera board based on the Sony IMX519 sensor. Due to slightly lower supports I had to use tiny screws, but that's easy to fix.

Downloads
170
Likes
12
Rating
0
P

Flashforge Adventurer 5M - Arducam Camera Mount

I created this camera mount for the Flashforge Adventurer 5M. The camera I used is an Arducam, but this will work with most 38x38mm camera modules. Installing Camera to Mount: This is designed to use 4: M2 screws to attach the camera to…

Downloads
168
Likes
44
Rating
0
P
PrintablesDirtClodimus

Arducam UC-684 Camera Mount for Voron Printers

This is a mount for the Arducam IMX291. I purchased the camera from Amazon here . The parts consist of a back cover, front cover, and a mount. 2 mounts are included. One mounts in the corner of two 2020 extrusions and one mount is for…

Downloads
164
Likes
18
Rating
0
P
PrintablesMahon2486

Arducam B0332 Cover and Mount

The FRC team I'm a part of (3015) uses these cameras and I designed these mounts. Decided I should upload the .stl's for anyone that wants them. I'll try to post new revisions as well. Print Orientations: The cap should be printed with…

Downloads
163
Likes
5
Rating
0
P
PrintablesChiral

Openscan Mini - Arducam - Ringlight -Adapter

Adapter for the 16MP IMX519 Arducam and the pre soldered ringlight to properly mount them on the openscan mini scanner. During assembly of the scanner I had problems mounting and aligning the camera and the ringlight properly because…

Downloads
154
Likes
22
Rating
0
P
PrintablesTheSith

Arducam front mount

This is remix of front panel for Arducam 16MPx with Autofocus. Original have circle cutout, Arducam need square cutout. Print instruction: Printer brand: Prusa Printer: Mini+ Rafts: Doesn't Matter Supports: No Resolution: 0.15 - 0.2…

Downloads
152
Likes
7
Rating
5
P
PrintablesJuniormunk

Arducam OV9281 OV2311 Case

This model is a case for the Arducam OV9281 and OV2311 using this USB C adapter board https://www.etsy.com/listing/1842851233/arducam-ov9281ov9782-usb-c-converter-pcb Uses an m2 x 4mm heatset insert and 4 M2.5 x 10mm bolts.

Downloads
151
Likes
5
Rating
0
P
PrintablesKohai UT

Raspberry Pi Camera Mount - Camera Module 3 WIDE + Arducam CSI to HDMI

@DocWeebl made a fantastic Camera Module 3 case for the Raspberry Pi Camera Mount but I needed it taller to handle the stacked Camera Module 3 Wide + the Arducam CSI-to-HDMI board in the stacked form factor. I'm a newbie to this editing…

Downloads
151
Likes
12
Rating
5
P
PrintablesDouglas Hale

Arducam OV5647 5MP adjustable mount to 30mm aluminum extrusion

Assembled with 3mm bolts, freely adjustable. Confirmed works with autofocus and fixed focus versions of the OV5647.

Downloads
149
Likes
15
Rating
5
P
PrintablesAlexander

Voron 0/ Voron 0.1 Raspberry Pi Camera Mount for Arducam 16M Autofocus Module

Just as in johanncc's original, this model requires no supports. It's a minor modification, just making room for the extra module underneath the lens.

Downloads
146
Likes
29
Rating
5
P
Printablesltlowe

Arducam B0031 with M12 Lens Camera Case for Articulating Raspberry Pi Mount

It seems there are many many board sizes for Raspbery Pi cameras. Here is a case and cover for the Arducam B0031 with M12 lens to fit Sneaks' Articulating mount. I included screw holes in the mount, but the fit is tight enough with the…

Downloads
144
Likes
17
Rating
5
P
PrintablesAtle Berg

ArduCam Stand

Shroud / casing / stand for the Rev.C OV5647 Camera for Raspberry Pi. Same sensor as in the original (v 1.3) Raspberry Pi camera, but with a proper lens. More about this camera can be found here:…

Downloads
140
Likes
7
Rating
0
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Downloads
137
Likes
6
Rating
0
P
PrintablesBluecornNM

Arducam Noir adapter for Articulating Pi Cam Mount

I really liked this camera mount, but I prefer a different cam. Arducam Noir is a 5mp cam with no IR filter, so it does really well in low light at the sacrifice of color fidelity. At any rate, this prints really easy and snaps right on…

Downloads
134
Likes
19
Rating
0
P
Printablesorangetruth

Arducam 16 MP Autofocus Camera 2020 Extrusion Mount for Voron Trident

This is a 2020 extrusion mount for a 16 MP Arducam Autofocus camera customized for my Voron Trident. Mount it in this order: Use an M3x8 SHCS and an M3 hammerhead nut to attach the 2020_extrusion_mount to the extrusion. Use an M5x12 BHCS…

Downloads
133
Likes
23
Rating
0
P
Printablese1miran

Ultra small Pi Zero Case for 120° or 160° Pimoroni/Arducam Pi Camera Module (Frank-S01-V1.0 OV5647)

This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…

Downloads
132
Likes
18
Rating
5
P
PrintablesZach Taiji

Arducam holder for X-Axis camera mount

Use with this mount: https://www.thingiverse.com/thing:2956323 Designed specifically for the Arducam, you can buy it here: https://www.amazon.com/gp/product/B012V1HEP4/ Cable (you'll need to buy a longer one than is provided with the…

Downloads
131
Likes
5
Rating
0
P
Printablesardichoke

Arducam OV5647 Case for Ender 3 Cam Boom

This is a case for the Arducam OV5647. It was designed to fit on this Cam Boom for the Ender 3, though it should be trivial to make other holders that fit it. The mounting hinge is sized for an M2 machine screw, and should be snug enough…

Downloads
121
Likes
6
Rating
0
P
PrintablesColorblinded

GoPro Mount and Housing for InnoMaker and Arducam Day and Night Vision Camera

Needed a housing for my InnoMaker day and night vision camera so I added opening in the housing to accomadate the light sensor and cable connection.

Downloads
107
Likes
3
Rating
0
P
Printablesrin_ofumi

Ultra small Pi Zero Case with Arducam 16MP autofocus camera for Tripod.

Happy 10th anniversary to the Raspberry Pi! <Description> Ultra small Pi Zero Case with Arducam 16MP autofocus camera for Tripod. PiZero_case_8_1_Zero_Case_withPiCamera_Top is Top Case.…

Downloads
103
Likes
14
Rating
0
P
PrintablesGizzo82

Arducam HDMI for Prusa Enclosure

I created a CSI/HDMI adapter port for my Prusa enclosure and a Raspberry Pi camera Print instructions printed with PET and 0.15mm layer height

Downloads
101
Likes
5
Rating
0
P
Printablesfivesixzero

Case for Arducam UC-733 Raspberry PI HQ Cam USB Adapter Board

A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…

Downloads
99
Likes
12
Rating
4
P
PrintablesHendrik Tafel

Arducam CSI-to-HDMI Adapter mount

Arducam CSI-to-HDMI Adapter mount. I used VHB tape to stick in the electronics bay of my Voron V0 Used hardware: 4x M2x5mm self tapping screws

Downloads
99
Likes
9
Rating
0
P
PrintablesJohnnyricoMC

Arducam Raspberry camera enclosure

This is 4AM Engineering's bracket for Arducam raspberry pi camera modules modified to fit Bogdanko's excellent Prusa camera mount. I designed it to fit my Arducam B0152 (8MP noIR fisheye) module, which is fitted to my printer's Y axis.…

Downloads
99
Likes
5
Rating
0
P
PrintablesD.R.racer

Arducam B0205

These are the source files for my Arducam B0205 flexible mount project, please read the full story at http://www.drracer.eu/3dp/20201115_arducam Disclaimer: The attached 3MF files have been optimized for my MK3S to print fillamentum's…

Downloads
96
Likes
6
Rating
1.5

Arducam B0506 Camera Housing and Arm

This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…

Downloads
95
Likes
3
Rating
0
P
Printablessraj

ArduCam Camera GoPro mount

normal, PLA, PETG, …

Downloads
95
Likes
7
Rating
5
P
PrintablesSirKeldon

Sovol SV06 Pi Camera/Arducam Solution

Summary I present to you a simple solution to hold a Pi Camera on the SV06 right X-carriage mount so you can control your print while the Z is raising, it consists of a simple mount that snaps onto the carriage and serves as a holder to…

Downloads
93
Likes
11
Rating
0
P
Printableshell_razor_art

Arducam Mini Case

If your Pi cam wasn't cutting it and you switched it out for a modular Arducam but couldn't find the right case, heres a new look on a solution you may have seen for the pi. Adjusted for an Arducam, this case and mount fits the base…

Downloads
92
Likes
5
Rating
0
P
PrintablesPim B

remixed back camera holder for Arducam 16MP case

I liked the design and the effort that there are many parts for the cam holder. Also has the original creater step files included. I had a Arducam 16MP autofocus. It came in it's own case. Which I liked also very much. So I took the step…

Downloads
90
Likes
7
Rating
5
P
PrintablesJannisJFry

Arducam IMX219 USB2.0 Mount

A mountig enclosure for the Arducam IMX219 (SKU:B0196). It has a clamping feature, that it can be used as a webcam. The middle part of the arm now has two wings to avoid tilting. (Bein(2).stl) To assemble it, you will need 1 M3x15mm Screw…

Downloads
88
Likes
4
Rating
0
P
PrintablesWalter Layher

Camera mounts for RaspiCam V3 and Arducam 16MP for Original Prusa Enclosure

I used the step file from the original model to adapt it to fit the PiCamera V3 module as well as the Arducam 16MP module. I also lifted the camera position by 40 mm, because I did not want the frame extrusions under the print bed in the…

Downloads
83
Likes
10
Rating
5
P
PrintablesBen Davies

QIDI X-Plus 3 Magnetic camera mount for Arducam OV5648 5MP usb camera

Mount for a camera for the QIDI X-Plus 3. The camera is an Arducam 5MP USB camera from Amazon. Arducam 5MP Wide Angle USB Camera for Computer, 1/4" CMOS OV5648 Mini UVC USB2.0 Video Webcam https://amzn.eu/d/7XNr6zw Uses 2 high-quality…

Downloads
82
Likes
9
Rating
4
P
Printablesx0pherl

Arducam Day / Night (B0205) case and swivel mount with Prusa & 3030 (Voron) brackets

***********IMPORTANT NOTE, THIS IS AN OLDER / UNMAINTAINED DESIGN******** I recommend you get the newer version which has many improvements: https://www.printables.com/model/1097162-swivel-mounted-camera-arm-mount-collection-for-pru the…

Downloads
81
Likes
15
Rating
0
P
PrintablesJustin B

Arducam Case

Enclosure for the B0205 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs Made to hang from the frame of my Type A Machines Series 1 3D Printer. Some support required for the front plate. Four tiny screws are…

Downloads
78
Likes
8
Rating
0
P
PrintablesSenior6588

Arducam Front Face

Arducam has a pcb that is slightly thicker and a lens with less tolerance. This $10 from amazon for example: https://www.amazon.com/gp/product/B012V1HEP4. This front plate has slightly shallower supports to compensate for the larger pcb…

Downloads
76
Likes
7
Rating
0
P
Printablesnobody at all

Arducam 16MP IMX519 Voron corner cam

Resized the model to work for the Arducam 16MP w/ the Sony IMX519 sensor. You'll still need the original corner mount, from here .

Downloads
75
Likes
1
Rating
0
P
PrintablesPumpkinSouffle

Mini+ Z-axis Motor Mount for Arducam Day-Night Vision Raspberry Pi Camera

Rough prototype remix of two existing projects: https://www.prusaprinters.org/prints/45962-prusa-mini-mini-raspberry-pi-camera-module-v21-8mp https://www.thingiverse.com/thing:3402755 Parts: The Arducam night vision pi camera on Amazon…

Downloads
74
Likes
6
Rating
0
P
PrintablesDiablo3dfx

Ender-3 V3 SE Camera Mount Arducam for Raspberry Pi UC-261 Rev. C

This is only the file for the camera holder. Be sure to download the mount file from my remix source at https://www.printables.com/model/725402-ender-3-v3-se-camera-mount/files . Then be sure to read the sources source model info,…

Downloads
74
Likes
4
Rating
0
P
PrintablesHenry Levesque

Case for Arducam Camera Module for Raspberry Pi

A snap-fit Raspberry Pi Camera case.

Downloads
74
Likes
2
Rating
0
P
PrintablesLordMelkor

Face Plate for Arducam 8MP Wide Angle

This is a remix of the Raspberry Pi Camera face cover from the Articulating Raspberry Pi Camera Mount for Prusa. This supports the Arducam drop-in wide angle replacement for the Raspberry Pi Camera v2. See:…

Downloads
73
Likes
8
Rating
5
P
PrintablesJKat3

Arducam 1080p Day Night USB Camera Case

This is an enclosure for the Arducam 1080p Day/Night USB camera . I needed to make a baby monitor for someone and had a raspi zero 2 and arducam to get started . Here’s an enclosure that uses (4) 16mm M2 screws and heat inserts. My board…

Downloads
71
Likes
2
Rating
0
P
PrintablesR3DPrintFox

ArduCam 16/64MP Camera Mount IKEA PLATSA

Arducam 16/64MP Camera Mount for IKEA PLATSA 2x Screws 4,5 x 16

Downloads
71
Likes
9
Rating
5
P
PrintablesPandorify

Arducam OV9281 Camera Mount - 37mm Lens Filter Attatchment

This is a mount for the Arducam OV9281 UVC USB, It includes a 37mm lens filter thread, so you can add a filter over the lens to keep it from being damaged in competition, or to filter out light glares. I found that the original lens of…

Downloads
70
Likes
5
Rating
0
P
PrintablesThefrankenator

ARDUCAM 8K GOPRO MOUNT

I modified Jacob Thompsons Arducam case to make it the same height as a gopro mount. Then I added the gopro compatible legs for the bolt and mirrored it. this fits perfectly with the Arducam 8k that i got from Amazon…

Downloads
69
Likes
10
Rating
0
P
Printableshernsl

Arducam IMX219 Front Cover for Corner Cam (Voron 2.4 Mod)

This is a remix front cover for the picam corner cameras for Arducam IMX219. As of this submission, there is a corner cam and a mirror corner cam for the Voron 2.4. The front cover does not fit the Arducam 8MP IMX219 variant so this…

Downloads
69
Likes
2
Rating
0
P
Printablesx0pherl

Arducam day/night cam (B0205) mounting arm and case

you probably want the newer update to this: https://www.printables.com/model/497457-arducam-day-night-b0205-case-and-swivel-mount-with which addresses a few issues! Should be pretty straight-forward to print & connect. The back plate will…

Downloads
68
Likes
8
Rating
0
P
Printablesrobonxt

Arducam Pi Camera Case/Holder

I really like pellcorp's "Simple PiCam v1.3 mount" , but it was too tight to fit an Arducam 5MP Pi Camera. I broke my camera's LED trying to fit it in, so I thought I'll make one myself. While this was designed from scratch, I've taken…

Downloads
67
Likes
9
Rating
0
P
Printablesbomtarnes

Minimal Arducam 5mp mount

I was quite frustrated with the complex camera mounts available for my voron v0.2. The stick format this camera comes in is fairly popular, but the arducam 5mp didn't quite fit existing options.

Downloads
67
Likes
8
Rating
0
P
PrintablesMaffooClock

Arducam B0268 Mount for Voron 2.4 (and others)

This is a minimalistic enclosure and mounting solution that I designed to mount my Arducam B0268 for my Voron 2.4, although it could very likely fit a variety of other printer frames. This camera is perfect for large printers like the…

Downloads
65
Likes
8
Rating
0
P
PrintablesJazzy_Plz

Arducam for Raspberry Pi Camera OV5647M12 Board Mount, GoPro 2 Prong Edition

I cobbled this together in TinkerCAD because it is a PAIN in the butt to find a camera mount for this specific board (the 36x36 board with the screws on each corner...) so! I made this! I jacked the mount point from one of the camera…

Downloads
64
Likes
5
Rating
0
P
PrintablesTheVoronModder
Downloads
64
Likes
13
Rating
5
P
PrintablesRuben U

Arducam OV5647 B0033

For the stand use Organic support in PrusaSlicer 2.6. I've printed in PETG, Layer height of 0.2 mm, 15% infill on a Prusa MK3S+. Textured build plate. Needed hardware: (2) M3 nut (2) M3 square nut (insert square nuts before closing the…

Downloads
62
Likes
3
Rating
0
P
PrintablesAllie

Voron 0.2 Arducam M12 Wide Angle Lens USB Camera Mount

I couldn't find a Voron 0.2 mount for the Arducam usb cameras so I made one in FreeCad based on HerrBatman's design.

Downloads
59
Likes
4
Rating
0
P
PrintablesACDorkitect

Arducam Camera Housing and Mount for Original Prusa Enclosure

Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system. I have included a stub arm for use with the Original Prusa Enclosure, or any other enclosure that can use a M3 through bolt. The Arm Axis…

Downloads
59
Likes
8
Rating
0
P
PrintablesTibee

OpenScan Mini Arducam IMX519 Back Cover with vent holes

Remixed Dana's back cover for the Openscan Mini, to provide some ventilation for the electronics. I printed this in ABS, 0.2 layer height I didn't use supports, some minor sagging on the outer edges, but it turned out OK. Depending on…

Downloads
58
Likes
5
Rating
0
P
PrintablesSaLei

Arducam CSI-to-HDMI Adapter bracked

Idea is to use double sided type to fix pcb to Raspi case (in my case it is armor case). To not bother with tinny screw holes on pcb and finding screws for that, I used 1.75mm filament.

Downloads
57
Likes
5
Rating
0
P
PrintablesOrdinaryWonder

Voron V0 Arducam Mount (IMX219 UVC)

Source: https://cad.onshape.com/documents/8e32626565cbbeef5e4cd8d3/w/b09365e8f3eeb6319f5a1b46/e/11d4dc9550a5c0cac525a516?renderMode=0&uiState=64aaf63abe953312f726ec55

Downloads
57
Likes
6
Rating
0
P
PrintablesBenjamin Sturm

ArduCam Mount - AnyCubic Kobra Neo

Camera mount for the Arducam B0176 for use with AnyCubic Kobra Neo PEI plate mounting. Slip the model over the lip used to peel the plate from the bed. Perfect angle to see print nozzle and watch prints in Octoprint.

Downloads
56
Likes
10
Rating
0
P
PrintablesJuanSolo

Arducam UC-261 ball mount

This is a remix-of-the-remix of thing:4601248 by smarc....who remixed this cam mount from lab27 thing:3121052 "Prusa I3 MK3 Raspberry Pi Camera Mount" I actually used this with the remix of that mount by inomad360 thing:4514535 so the…

Downloads
55
Likes
1
Rating
5
P
Printablesxwing

Support for Arducam TOF

Arducam TOF camera support, print with 0.2 layer in PLA or PETG

Downloads
54
Likes
2
Rating
5
P
Printablesmomodamonster

Arducam Case Housing with GoPro Mount

https://www.thingiverse.com/thing:5181195 Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes Resolution: .1 Infill: 36 Filament: Polymaker Polylite ASA Black Notes: I cobbled this together to make this work with this make; This…

Downloads
54
Likes
4
Rating
0
P
Printablescompbrain

Arducam CSI-HDMI Housing

This is a remix of "RPI Cam + Arducam CSI-HDMI" by nperto on Thingiverse that rotates the attachment 90° and attaches to the opposite side. Designed to work with the arm/pivot from…

Downloads
54
Likes
7
Rating
0
P
PrintablesRyan

Arducam CSI to HDMI Cable Extension Module Mount

I purchased an Arducam CSI to HDMI Cable Extension Module online and needed a way to mount it to my pi camera case. Designed this small piece that glued to the back of the camera case and then provided a place to screw the module to. Not…

Downloads
53
Likes
0
Rating
0
P
Printablesaveluru

Arducam B0205 IR Case + GoPro Mount

Designed for Arducam B0205 Printed without supports with the flat edge facing downwards. All parts are tolerances by 0.25mm and fit together nicely I originally designed the case to snap together with pegs that go through the Arducam…

Downloads
50
Likes
6
Rating
0
P
Printablesvinay kairam

Arducam for Raspberry Pi

Arducam for Raspberry Pi Camera Module 3 Case, ABS Housing for IMX519 16MP Autofocus Camera, Compatible with Raspberry P

Downloads
49
Likes
6
Rating
0
P
PrintablesMcBig

Arducam B0200 printer mount

This model is inspired by Michal Fanta and arm is based on Original Prusa I3 z-axis-top model. It is possible to use with Raspberry Pi Camera and with Arducam and other USB cameras where is possible disconnect and connect the USB cable to…

Downloads
48
Likes
3
Rating
0
P
PrintablesGizzo82

Arducam HDMI Adapter for LACK Enclosure

I already make a HDMI Port for the IKEA LACK top, and this ist the part to place under the printer Print instructions no supports needed

Downloads
48
Likes
5
Rating
0
P
PrintablesSi_22

Arducam with M12x0.5 lens mount

This is a mount for the larger Arducam with the M12x0.5 lens attached. I've designed it to attach to the Flexible camera mount for Ender 3 Pro: https://www.printables.com/model/199574-flexible-camera-mount-for-ender-3-pro The mount comes…

Downloads
47
Likes
3
Rating
5

Arducam Tube Mount

This is a rather simple part designed to allow you to mount an Arducam global-shutter camera such as this one on a piece of 1x1" punched tubing . It's designed for this case designed by FRC team 3295. The design is fully parametric, so it…

Downloads
46
Likes
2
Rating
0
P
PrintablesTD

Arducam, Pi Camera Mount for Prusa MK3S (MK3S+)

The wire holder was modified to a closed loop, designed to secure thinner cables and maintain a tidy appearance. Print as is, NO SUPPORT NEEDED. I use PETG Hatchbox. This remix includes the X-Axis cable strain relief and without it.…

Downloads
43
Likes
4
Rating
0
P
Printablesd3vnu1l

Arducam 1080P IR Camera Enclosure

Snap fit enclosure for this camera: https://www.arducam.com/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds.html Print Settings 0.2mm PETG, 15% infill (default quality profile in…

Downloads
42
Likes
3
Rating
0
P
Printablesnoob_42

Cl4p-tp Camera case for arducam

Arducam case made from a Cl4p-TP model with slot in back lid for cable to go through. A few rough spots left to figure out but works great. Will need some hot glue to help hold camera module in place for now (working on a different…

Downloads
42
Likes
6
Rating
0
P
PrintablesBrightGecko

M7 sensor lens casing for OV5647 (ZeroCam / Arducam)

Replace the original M6 threads on the OV5647 sensor (Arducam/Zerocam) to M7 threads with this casing. Before changing the threads, you need to remove the original M6 lens casing from the OV5647 sensor body. To do this, you can carefully…

Downloads
41
Likes
1
Rating
0
P
PrintablesDr.D

Prusa Mini Nozzle cam mount (Arducam OV5647 w. M12 lens)

I made this camera mount for my Prusa Mini+ and 5MP Arducam (https://www.amazon.com/gp/product/B0867C9SZP) Thanks to @andimoto I used a similar way to mount to the nozzle fan. This camera plugs directly into a Raspberry Pi running OctoPi…

Downloads
40
Likes
16
Rating
5
P
Printablesj____t_____

Raspberry Pi Cam Arducam Mount for 2020 Extrusion

This is a quick remix of Seabird HH's wonderful Raspberry Camera Bracket but adapted for a 2020 extrusion. The mount is secured with a M3 bolt and T-nut on either side of the extrusion. I didn't run the ribbon cable in the example image…

Downloads
40
Likes
2
Rating
0
P
PrintablesRedstoneCool

First Tech Challenge Arducam Case

This case is designed to facilitate the mounting and protection of the Arducam B0332 camera along with other Arducam cameras that share the same footprint. The case is specially designed for use in FTC and aligns to an 8mm grid pattern.…

Downloads
36
Likes
1
Rating
0
P
Printablesjpkelly

Arducam Day/Night camera holder

Mount for Arducam 1080P Day & Night Vision USB Camera

Downloads
36
Likes
4
Rating
0
P
PrintablesVACInc

Arducam Cap adjusted for square PCB

Remix of the Arducam cap/case for the pi camera mount to account for a square PCB

Downloads
35
Likes
1
Rating
0
P
Printablesclevercode

Adapted Faceplate for Arducam and USB

Amended faceplate to fit https://www.amazon.ca/dp/B098L7WJ4C?th=1 USB splitter ports

Downloads
33
Likes
2
Rating
0
P
PrintablesJim

Pi Zero Case for ArduCam Auto Focus

Love the original model. But when I upgraded the Camera to a motorized focus model, the Camera would not fit; It's slightly larger that the standard fixed focus camera. This is used with any of the Case Backs available in the original…

Downloads
33
Likes
5
Rating
0
P
Printableszeal

Arducam Case

I tried the original model, but the case was larger than the model of Arducam that I had, and I didn't have any spare M2 bolts on hand. So I remodeled the case to fit the smaller model Arducam OV5647 (the one without a lens). This is the…

Downloads
32
Likes
4
Rating
0
P
Printablesburgersquid

Arducam bracket for Bluerov

Allows the use of an Arducam camera module with Bluerov's Subsea Camera Tilt System . Or really any project where you want to use an HS-5055MG servo to move an arducam around. The inside of the mount point is not splined (like the servo's…

Downloads
32
Likes
1
Rating
0