Search results: ass

Sort order

24,254 models

P
PrintablesHD_Creator

Miniature Vise 2.0 (much easier to assemble and 100% printable)

History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…

Print approx. €4.29–€5.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24,102
Likes
4,212
Rating
4.85
P
Printablesschuetzi99

Glasses holder for car sun visor

This holder is clamped onto the sun visor of the car, or onto your shower cabin door. It reliably holds a pair of glasses without interfering. So the sunglasses are easily at hand when you need them. Easy to print with standard…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
20,771
Likes
5,168
Rating
4.85
P
Printablesrorys3D

Flexi glasses case

Case for glasses that uses 3D flexible structure. This model is printed flat and then folded into its final shape. Introducing video: Printing: There are small user support blocks under the side wall radiuses and it is intended to be…

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16,985
Likes
5,724
Rating
4.83
P
PrintablesMaff

Astronomical Telescope "Hadley" - an easy assembly, high performance Newtonian

You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
16,933
Likes
4,590
Rating
4.95
P
Printableskosteklvp

Sir Nigel Squintsworth Glasses Holder

This is a Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no Prepared files…

Print approx. €6.57–€8.03 excl. taxPreliminary estimate for one variant

Downloads
5,107
Likes
1,134
Rating
4.99
P
PrintablesPrism08

UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale (RC CAR / RC TRUCK)

18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
3,706
Likes
809
Rating
4.4
P
PrintablesBurt0n

Thug Life / Gangster Glasses

Thank you SV3D for the model. I split the part to make it faster and easier to print. I printed it in matte black PLA and PETG on a textured, powder-coated print sheet. The parts fit perfectly for me, but if they are a little loose, just…

Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,407
Likes
694
Rating
4.62
P
Printablesarcanelayers

Sunglasses Car Visor Clip V2

Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…

Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,880
Likes
228
Rating
4.67

Individual Nametag for glasses and cups (Wedding Decor)

With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
2,834
Likes
432
Rating
4.87
P
Printablesrorys3D

Party glasses - 2025

A model of funny glasses for celebrating the arrival of the new year 2025. Printing: Print takes about 1h47min on MK4 and I reccomend to use color-change during print, e.g. first 7 layers with one color and rest with black color. But of…

Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant

Downloads
2,099
Likes
455
Rating
4.88
P
PrintablesAEVW

print in place air engine (no suport, no assembly)

I've been working on this engine for quite some time. it is a bit hard to print since the tolerances need to be quite tight. it can be a little hard to break free so have some pasient and a well-tuned machine will help. it can be printed…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
1,995
Likes
75
Rating
4.33
P
PrintablesBoogie

QR-code WIFI password (rickroll)

QR-code fake WIFI password Links to Rick Astley - never gonna give you up

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,842
Likes
1,131
Rating
4.9
P
Printablesrorys3D

Party glasses - 2026

3D model of party glasses for celebrating the arrival of the new year 2026. Printing: Print takes about 1h12min on CORE One and I recommend to use color-change during print, e.g. first 7 layers with one color and rest with black color.…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
1,799
Likes
209
Rating
4.94

1:10 Adjustable RC chassis

1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…

Print approx. €8.38–€10.24 excl. taxPreliminary estimate for one variant

Downloads
1,768
Likes
369
Rating
4.75
P
Printablesmarchal3D

Speaker stand / Passive amplifier

Zesilující stojan pro mobily. Výrazné zesílení zvuku, viz video. Odzkoušeny telefony s celkovou tloušťkou včetně krytu 8.5 - 9.5mm a šířkou do 79mm. Vejde se i na Prusa MINI, jen je ho třeba pootočit o 45°. Doporučené tiskové nastavení:…

Print approx. €15.37–€18.79 excl. taxPreliminary estimate for one variant

Downloads
1,720
Likes
178
Rating
5
P
PrintablesNeolker

Cat Glasses

Christmas Cat Glasses just for fun

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
1,665
Likes
410
Rating
4.9
P
Printablestjjos

Lucky 13/Mini 13 Sunglasses

Just some cool sunglasses for Lucky 13 and Mini 13. UPDATE: The Lucky13 version no longer needs to be scaled down to 95%. I've updated the model to the correct size to provide a snug fit. Added a Mini13 version.

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
1,606
Likes
292
Rating
4.57
P
PrintablesBoogie

Glasses holder

Glasses holder Screw size 4mm

Print approx. €6.61–€8.08 excl. taxPreliminary estimate for one variant

Downloads
1,534
Likes
216
Rating
4.8
P
Printablesrorys3D

Bobble HAPPY BIRTHDAY glasses

HAPPY BIRTHDAY glasses with funny bobbling letters. Fits on Prusa MINI (see the last picture). If you want “MERRY CHRISTMAS” glasses you can find it here https://www.printables.com/model/669553-bobble-merry-christmas-glasses. Short…

Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant

Downloads
1,514
Likes
175
Rating
4.85
P
PrintablesMonster Made

Halloween Glasses

Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
1,505
Likes
449
Rating
4.67
P
PrintablesDionarap

Tough life / Deal with it Glasses

Easy to print Glasses, no support is needed. For the hinge use a bit of filament, if you have the 1.85mm one. Else print the pin and use that. The glare should fit snug in the cutout of the glasses. for best result, press the glare in…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
1,500
Likes
694
Rating
4.95
P
Printablessh

📼 Cassette tape business card holder/case

Info: original-size casssette case with realistic tape lookalike design drawn on the case Print info: can be printed in place or separately, because as everybody knows - cassete cases can be dismantled and this in not an exception (with…

Print approx. €3.33–€4.06 excl. taxPreliminary estimate for one variant

Downloads
1,259
Likes
316
Rating
4.89
P
PrintablesKatarn

Carcassonne Meeples/Figures - Complete Set!

All Carcassonne figures available (including expansions) to replace the ones you have lost or to create full player sets to be able to play with more friends. The figures are separated into two large groups, those that belong exclusively…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
1,151
Likes
137
Rating
5
P
PrintablesAleš Stárek

Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant

Downloads
1,139
Likes
151
Rating
5
P
Printableskap42

Carcassonne Tile Tower

The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
1,124
Likes
195
Rating
4.94
P
PrintablesCalebTimoteo

Minimalist Passport Book Cover/Case - Travel Essentials

Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
253
Rating
4.2
P
PrintablesHonex

CARCASSONE KARAK card dispensing tower

This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
1,062
Likes
136
Rating
4.9

Vaccination Multipass Holder

This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - https://www.thingiverse.com/thing:491108 I took the design and made some adjustments to the geometry and finish to allow for…

Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant

Downloads
1,062
Likes
179
Rating
4.75
P
PrintablesAndrew_Sink

Fraction Blocks, Teachable Classroom Math Manipulative Model!

Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…

Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant

Downloads
1,032
Likes
232
Rating
4.8
P
PrintablesAZ3D

Simple Compass & Scribing Tool | Fully 3D Printed | Less than 10 grams

Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
990
Likes
295
Rating
4.63
P
PrintablesMetikumi

Two hinges to attach an acrylic glass door to a wooden frame

This is a hinge to attach an acrylic glass door to a wooden frame. The provided objects are for a 10mm wood panel with a 5mm acrylic glass sheet, inset by 5mm. The model contains a spacer to compensate for this 5mm inset. If you have…

Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
984
Likes
200
Rating
5
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant

Downloads
863
Likes
278
Rating
5
P
PrintablesFelstedSkiver

35mm to 120/220 film adaptor kit for Hasselblad and other roll film cameras

If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…

Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
802
Likes
108
Rating
5
P
PrintablesJan Vejtasa

Ultimate Karak & Carcassonne tile grid holder

Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant

Downloads
733
Likes
92
Rating
5

Parametric glasses templates / glasses arms

After printing, heat the arms with a heat gun or a hair dryer and bend them to fit your head. Two Part Version The initial design (the one part one) did hold up for a month or two, but it did brake after some time at the mounting point to…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
723
Likes
62
Rating
5
P
Printableskap42

Double Carcassonne Tile Tower

The Ultimate Double Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
689
Likes
78
Rating
4.83
P
PrintablesGizmo Gurus

Flexi Glasses Case Remix – RangeVault Edition

Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…

Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
686
Likes
114
Rating
5
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
668
Likes
164
Rating
4.42
P
PrintablesDanie Conradie

Glasses Replacement Frames (Long Term Tested)

I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
637
Likes
79
Rating
5
P
PrintablesDanB

MDT ACC Chassis Rear Bag Rider

The is a MDT ACC Chassis Rear Bag Rider. Hardware: (2) Socket Head Screws 4mm x 10mm, (2) 4mm M-Lok T-Nuts Filament: PETG Black

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
610
Likes
35
Rating
5
P
PrintablesMilos V.

Simple mATX form PC chassis

Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…

Print approx. €9.22–€11.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
598
Likes
57
Rating
5
P
Printablesantonio2709

Classic Chess Set – Parametric Design (FreeCAD) - -ajedrez

Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
564
Likes
28
Rating
0
P
Printablessam allen

Driver/Passenger Armrest Switch Panel Clip

For GMT800 (1999-2007 GM/Chevy Trucks and SUV) arm rest switch panel replacement clip. This will need to be glued or epoxied in place. Trim old clip location on the arm rest and place this part into the hole underneath. The model is for…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
556
Likes
22
Rating
0
P
Printablesbjamdesign

Cat Grass - Growing Kit - Standard and Wide Mouth Canning Jar

This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
538
Likes
197
Rating
4.75
P
PrintablesMici

DUMMY 13 goes to COMIC CON - Assasin's Creed

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…

Print approx. €0.23–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
529
Likes
147
Rating
0
P
PrintablesMichaelQ

Easter Egg - Impossible Pass-Through

The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…

Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant

Downloads
525
Likes
51
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-AFV001-Assorted-german-WWII-tank-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers

Downloads
513
Likes
74
Rating
0
P
PrintablesKayuHD

Wasserhahn/ventil Knauf/Griff mit integrierter 7.7mm Rastbuchse / Faucet handle valve with integrated 7.7mm snap-in socket

Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant

Downloads
508
Likes
29
Rating
5

Classic Dr. Pepper Sign 2 Color

Color order: White then Red. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…

Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant

Downloads
488
Likes
180
Rating
5
P
PrintablesMarcel

Klinge Rasentrimmer Einhell, Grass Trimmer Blade

ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
473
Likes
36
Rating
5
P
PrintablesOzzy The Artist

Sharpie Compass [Large Circles]

This is a remix of a model made by Kezat. I made it longer, put accurate millimeter and imperial measuring marks on it, made the tightening knob larger and reduced clearances for moving pieces for more accurate drawing. • After printing,…

Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant

Downloads
463
Likes
123
Rating
5
P
Printableslivius

Body+Chassis Rectangle 4WD car

I have built a 4WD car and programmed it to be controlled by phone. However, it didn’t look quite right, so I designed a new body. Since my printer isn’t large enough, I scaled it down slightly (to 97.5%) in PrusaSlicer. The result turned…

Print approx. €4.11–€5.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
457
Likes
13
Rating
0
P
PrintablesShoaib Khan

Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant

Downloads
456
Likes
121
Rating
5
P
PrintablesStrankler

Removal Tool for Oven-Lamp glass Neff / Siemens

This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, … On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the…

Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
453
Likes
17
Rating
5
P
PrintablesMax Aalderink

Home Assistant ZBT-2 wallmount

This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…

Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
436
Likes
40
Rating
5
P
Printableszbuser

Tippmann A5 Paintball Trigger Assembly

NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…

Print approx. €3.24–€3.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
432
Likes
42
Rating
0
P
Printablesrolleroll

Sodastream Halter für Glasflaschen // Sodastream holder for glass bottles

Sodastream Halter für Glasflaschen zum austrocknen. stabil / Standfestigkeit hoch / schlichtes Design Sodastream holder for glass bottles to dry out. stable / Stability high / simple design Print instructions Printer brand: Prusa Printer:…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
430
Likes
42
Rating
4.91
P
PrintablesVF

Classic Car Steering Wheel Knob

A knob for your printer, to turn round the elegant way

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
416
Likes
25
Rating
4
P
Printables3D-decor

Window decoration Olaf - 3D printed "stained glass"

Olaf as winter window decoration. Printed from transparent PETG, it looks like stained glass. Print instructions The decoration is printed on a standard Prusa i3 MK3S printer with one extruder and without MMU. The colors are changed…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
406
Likes
89
Rating
5
P
PrintablesAinon3Dtisk

Classic wooden slingshot

Hello, Welcome to my profile, full of models and miniatures :-) I have a Classic Wooden Slingshot for you. It is really authentic and shoots well with it. To assemble you need a rubber band and some leather to catch the projectile. You…

Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant

Downloads
398
Likes
133
Rating
5
P
PrintablesMac

Überwürfmutter für Gasschlauch 17mm

Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
395
Likes
34
Rating
5
P
Printableshorrovac

Alfa Romeo 147 (and other contemporary) passenger airbag cover clips

Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
376
Likes
18
Rating
0
P
PrintablesMatteo Cristini

Thumb rest for Fender/Squier Jazz Bass (No Drilling Required)

This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
365
Likes
45
Rating
5
P
PrintablesGajdy

Classic Clamp Fully Printed !

I have designed and created a classic clamp specifically intended for hobbyists, particularly those involved in activities like modeling and crafting. What sets this clamp apart is its unique construction and functionality, catering to…

Print approx. €7.43–€9.08 excl. taxPreliminary estimate for one variant

Downloads
356
Likes
54
Rating
0
P
PrintablesPatricio

Classic Chess King

This is a beautiful classical style chess king designed with FreeCAD, with no compromise regarding supports. The original dimensions of the piece are 36 mm (≈ 1 27/64") diameter and 92 mm (≈3 5/8") height, but you can rescale it as…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
345
Likes
11
Rating
5
P
PrintablesREMLURELMI

Remix - Larger Console Tray for Honda Passport/Pilot/Ridgeline

Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…

Print approx. €10.03–€12.26 excl. taxPreliminary estimate for one variant

Downloads
341
Likes
57
Rating
5
P
PrintablesJakub Kočí

Compass artifact

This is my version of a Compass artifact seen in S.T.A.L.K.E.R. series. It consists of several parts that can be easily assembled and mounted with LED lights. Personally, I find this artifact to be much nicer with transparent tubes rather…

Print approx. €7.42–€9.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
333
Likes
45
Rating
0
P
Printables3DJG

Bending machine for making brass rings for telescope eyepiece holders.

Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
327
Likes
190
Rating
0
P
PrintablesPrintyet

Hisense Pumpenfilter-Ablasshilfe für Waschmaschinen

Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…

Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
25
Rating
0
P
PrintablesTobyman

Glasses Frame - Ray Ban style

I modeld this for my son to play with and as an experiment to check if a glasses frame can be printed. Adjust the scaling get the dimensions right Printing: 0.2 or less layer hight I used black PLA+ No supports needed! Materials: A wooden…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
25
Rating
5
P
Printableskkingsbe

2001 BMW Z3 Passenger Side Vent

This is a a replacement for the passenger side vent in a 2001 BMW Z3.

Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant

Downloads
310
Likes
44
Rating
0
P
PrintablesTronnic

Passive Extruder Stepper Motor Cooling Cover - MK3/S NEMA17

A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…

Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
301
Likes
50
Rating
5
P
PrintablesFlederlaus

Diffusor-Schlüssel - Wasserhahn Perlator für Gr. 18, 22, 24

Ein Schlüssel, für die Größen 18, 22 und 24, um den Perlator von einem Wasserhahn zu lösen oder wieder anzuziehen. Die üblichen Werkzeuge sind sperrig und nie zur Hand. Leicht verstaubar lässt sich damit schnell ein Sprudlerkopf vom Hahn…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
16
Rating
4.5
P
Printablesbertwest

Magnifying Glass

The old holder for this magnifying glass was broken so here is a new one

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
300
Likes
10
Rating
5
P
Printablestille

fest sitzender Wassertrichter für Wohnmobil und Caravan - Version 2

Ein Trichter, der beim Berühren mit der Gießkanne nicht gleich runter fällt. Ich habe die Zapfen, die der Schlossdeckel besitzt hier her übertragen. Dadurch kann ich den Trichter durch Drehen fest mit dem Stutzen verbinden. Da man leicht…

Print approx. €5.81–€7.11 excl. taxPreliminary estimate for one variant

Downloads
293
Likes
25
Rating
5
P
PrintablesAlpino76

Musicman stingray bass thumb rest

30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
292
Likes
10
Rating
4.5
P
Printablesschuetzi99

spinning top / gyroscope, three-part, can be assembled without gluing

This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
21
Rating
4

Cover for jacking hole VW Passat

Из-за снега и льда потерялась шапка домкрата. Решил оперативно сделать модель, чтобы поставить ее на место.

Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
286
Likes
20
Rating
0
P
PrintablesIan Rich

4 Glass holder that fits over the top of a Wine Bottle

This is a remix of the 2/6 wine glass holder I found on Thingverse. http://www.thingiverse.com/thing:1910037 I only needed capability to hold 4 glasses, and the snap-together version I found a little too hard to give to older people :)…

Print approx. €6.22–€7.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
280
Likes
60
Rating
4.5
P
PrintablesMaVeRa

Private Property No Trespassing Plate

Private Property No Trespassing Plate This 3D printable model is a warning sign with three dimensional human bones, skull and English text. It is intended for installation on a door, cabinet or any board or object. You can put it on your…

Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
247
Likes
79
Rating
4.5
P
PrintablesTeo_211

Revell Dassault Aviation Rafale C Wall Art

Revell Dassault Aviation Rafale C Wall Art Silhouette model. Adjustable size. I accept model suggestions

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
244
Likes
43
Rating
5
P
PrintablesZahy

Home Assistant Glow Box

Custom box for Home Assistant Glow sensor, built on D1 Mini and ESPHome. In the files you will also find a modified version (v2) of the sensor box with a holder for easier removal of the sensor. Home assistant Glow by Klaas Schoute :…

Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
241
Likes
27
Rating
5
P
PrintablesDIY Machines

Create amazing pieces of resin stained 'glass' windows, bookmarks, signs and more!

If you enjoy this project please ‘like’ it here on Printables. It really helps me out. Thank you. I'll show you step by step how to create these amazing stained glass like marvels with the help of your 3D Printer and some free design…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
83
Rating
5
P
Printablesihavegerms

Nose Knob - For holding glasses

Description: I created this knob in Meshmisher and Tinkercad. It's a simple nose glasses holder that's also a knob. The idea came to me after the millionth time of knocking my glasses off the nightstand in the middle of the night while I…

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
236
Likes
115
Rating
4
P
PrintablesWaffelz

Assorted ammunition/snap-caps

this is a small assortment of ammunition i made in tinkercad. i designed most of these to fit rifles or pistols i/my friends actually use but got separate requests for others over time. none of these prints need support material or rafts…

Print approx. €6.08–€7.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
234
Likes
41
Rating
5
P
PrintablesKtowns

Good job coin with solid words for school classroom or home good deeds

Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
234
Likes
38
Rating
5
P
PrintablesRobertusMaximus

Pass Through V2 Wargames Wall - Section 8

Pass Through V2 Wargames Wall - Section 8 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…

Print approx. €9.24–€11.30 excl. taxPreliminary estimate for one variant

Downloads
226
Likes
45
Rating
0
P
PrintablesEGDO

Frame for glass bottle cutter.

It's a frame to hold an engraving tool to cut round glass objects. This is the first prototype. I only updated the back-end plate (file "Bottle_cutter_slider_02" and see photos), now it is more rigid but its purpose is not to prevent the…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
65
Rating
5

Minecraft grass block dual color

Dual color version of Minecraft grass block. Fits nicely with ore blocks . I know the one green pixel in the left corner is missing, but otherwise it would not work. Made in onshape .

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
212
Likes
38
Rating
5
P
PrintablesPeter Farell

Bodhisattva of Compassion

Bodhisattva of Compassion

Print approx. €15.55–€19.00 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
47
Rating
0
P
Printablessacrilegor

MUGLASS - Earmuff + Safety glasses wall holder

I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…

Print approx. €4.71–€5.75 excl. taxPreliminary estimate for one variant

Downloads
207
Likes
28
Rating
4.67
P
Printables3D-Lab

Glasses Holder || Wall Mount & Adhesive mount || (with a keychain Mount)

Slicer settings: • Printed in PETG • Nozzle size: 0.4 layer thickness • Layer Height: 0.2 (mm) • Supports must be activated, right in the dropdown menu (everywhere) • Supports are required for the small hooks of the glasses holder • Size:…

Print approx. €3.93–€4.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
205
Likes
45
Rating
5
P
Printablescmcollander

Jetbot Chassis

The main chassis for a NVIDIA Jetbot using a Jetson Nano. https://github.com/NVIDIA-AI-IOT/jetbot Print instructions For a properly tuned Prusa, no supports are necessary in the current orientation when imported into PrusaSlicer.…

Print approx. €8.96–€10.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
205
Likes
9
Rating
0
P
PrintablesMatthewGTaylor

Bobbin Clip - Singer class 15 size

Loose bobbins unraveling in your kit? Use this simple case. Holds 4 bobbins securely. Simply snap in and out. Print multiples if you have a bunch of bobbins. Use | Works with common Singer class 15 bobbins. Mine measure approximately…

Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant

Downloads
203
Likes
34
Rating
5
P
Printablescornspirit

Organic Chemistry Hexagon Assist

No specific print settings. Just draw hexagons to your hearts content.

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
201
Likes
55
Rating
4.83
P
PrintablesAlpino76

Bass/Guitar string winder

A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
200
Likes
28
Rating
5
P
PrintablesBooks

Compass Rose Coin

A coin with a compass rose engraved in it. Uses art from PublicDomainVectors.org .

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
198
Likes
19
Rating
5
P
PrintablesFabio3D

Marker compass adapter: pen clamp

Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
28
Rating
0
P
Printablesmkoistinen

Quartet Glass Whiteboard Marker Holder

I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.

Print approx. €6.15–€7.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
189
Likes
18
Rating
4.5
P
PrintablesAmuseables

Marceline's Battle Axe Bass Guitar

Info Grab your friends its another Adventure Time print! This time its Marceline's epic battle axe bass guitar. I am working on a full epic version of Marceline, but I thought I would upload her bass now for those interested.…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
35
Rating
0