Search results: axia

Sort order

394 models

P
PrintablesDanielAlex

Star Wars Ataraxia

The Ataraxia “the Ataraxia, the one large starship under direct control of the Jedi Order. It was a beautiful ship, designed to subtly evoke the Order’s symbol with its hull and sweeping, curved wings accented in white and gold. While the…

Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant

Downloads
429
Likes
95
Rating
0
P
PrintablesMiguel M.

Coaxial Cable clip

These dont damage the cables like staples. they hold the cable securely but they cable is still loose enough that you can slide and ajust it even when fully screwed down. Enjoy! And If you have a minute, check out my other models!…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
273
Likes
34
Rating
5
P
Printableszbuser

Spring Powered Coaxial Rotorcraft

NOTE: this is not currently flying. I am going to totally redesign it optimized for a better power to weight ratio sometime in the future. This is my submission for the “Make it Fly” contest. It is powered by a total of 60 large…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
19
Rating
0

Hook/holder for 4mm coaxial cable

EN: Small hook for attaching a thin coaxial cable with an outer diameter of approx. 4mm. Use countersunk head screws with a diameter of 3mm for attachment. Print without supports. CZ: Malý háček pro uchycení tenkého koaxiálního kabelu o…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
6
Rating
5
P
PrintablesWaikikiprod

4010 Axial Fan 3D Model .step & .stl

________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…

Downloads
4,638
Likes
139
Rating
5
P
PrintablesA26

Mini Triaxial Tourbillon

This is probably just about the smallest triaxial tourbillon mechanism that one can reasonably make with a .4mm nozzle. It's powered by a sping motor at the bottom an fits within a 96mm sphere. The only non-plastic parts are a couple of…

Downloads
3,155
Likes
1,246
Rating
4.23
P
Printablesdjos_1475

Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing

Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…

Downloads
1,830
Likes
240
Rating
4.63
P
Printablesneale

Axianov Irish Flute

This is a fully playable open-hole "Irish" flute in the key of D. It has no keys. Intonation is good, staying in tune with other flutes videos I found on the Internet. To me, it sounds like a wood flute. I was able to play D and G major…

Downloads
1,798
Likes
237
Rating
4.8
P
Printablesshiura

Triaxial Numechron Clock

A mechanical digital clock with three digit wheels on different axes (X, Y and Z) from each other. Visually crazy but practical Driven by a single stepper motor All parts are designed within 180 x 180mm Easy time adjustment by manual…

Downloads
1,335
Likes
457
Rating
5
P
PrintablesUranoxyd

Axial Fan Spacers 120, 92, 80, 60, 40, 30 mm

A collection of spacers for the most common axial fan sizes. 120, 92, 80, 60, 40 and 30 mm The STL files have the spacer with a height of 100 mm, so you can use the Z-scale in the slicer to give it the exact height in millimeters that you…

Downloads
1,134
Likes
115
Rating
5
P
Printablesprintable

Axial SCX24 AX24 Driveshaft (updated)

Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…

Downloads
1,108
Likes
103
Rating
5
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
PrintablesTim A.

Axial Fan Ø120mm LEGO Technic compatible

I've always wanted to design a nice fan, similar to the cooling fans that computers have. This turned out quite good in terms of both looks and performance. I was surprised that it was easier than I thought to get the right look. In terms…

Downloads
1,039
Likes
57
Rating
5
P
Printablesmcmaven

Triaxial Tourbillon Clock Make/Mods

2/21/21 FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here. Triaxial Tourbillon Clock Build Notes: (Download the…

Downloads
1,006
Likes
176
Rating
0
P
PrintablesRobert Posey

Axial Hotrod (V5)

Loved the hot rod Ossum made so much I had to make one. I wanted it to be functional as an actual rock crawler so I put most of the weight up front and down low for steep climbs. I designed it to work with an axial ax10 wraith or scx10…

Downloads
597
Likes
95
Rating
5
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Downloads
586
Likes
55
Rating
0
P
PrintablesSilverBullet126

Axial SCX6 - Axle Stands

Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…

Downloads
577
Likes
34
Rating
4.57
P
PrintablesBirdbrain

Birdbrain's axial flux synchronous motor prototype project

This is a repository of .stl files that were used in the creation of a prototype axial flux synchronous reluctance motor. The video showcasing the motor can be found here: https://www.youtube.com/watch?v=SNQVJudd6BU Since the reluctance…

Downloads
571
Likes
37
Rating
0
P
Printablesneale

Axianov Irish Piccolo

This piccolo was given away by @axianoff_2745170 as a free promotion when the Axianov Irish Flute was first released. Thanks to work from @Roman_2878361 and Anna Bryusova , these original STL files are now available to download! Skip…

Downloads
563
Likes
89
Rating
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Basecamp/C10/JLU/Bronco

Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…

Downloads
521
Likes
69
Rating
4
P
PrintablesZane Thomas

1/24 Scale 1996 Ford F250 for Axial Crawler Body

1/24 Scale 1996 Ford F250 for Axial Crawler Body

Downloads
483
Likes
52
Rating
0
P
Printablesmcmaven

Triaxial Motorized

This is a Motorized version of my original Triaxial Tourbillon Clock Make. The two major changes are that this version uses stepper motors to driver the carrier, and it incorporates the Triaxial Quartz Movement Upgrade. However, there are…

Downloads
477
Likes
96
Rating
0
P
PrintablesNavierIsStoked

Micro Swiss NG Shroud with Dual 5015 Blower Fan Part Cooling and 4010/4020 Axial Fan Hot End Cooling

Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…

Downloads
472
Likes
58
Rating
4.83
P
Printablesadriancubas

3D PRINTED AXIAL FLUX MOTOR (YOKELESS)

Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…

Downloads
472
Likes
45
Rating
0
P
Printables0scar

Axial 4020 fan model for use in 3D designs

This is not necissarily meant to be printed, but can be very useful when you develop your own designs in a 3D CAD application. Use this axial 4020 fan model in your custom 3D designs.

Downloads
466
Likes
11
Rating
5
P
PrintablesRevellio

AXIAL SCX10 I & II - Chassis Parts / Update 22.10.2026 - New Body Mounts

Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…

Downloads
411
Likes
53
Rating
0
P
PrintablesYetiEngineering

TruckNut Kit for Axial SCX24

TruckNut kit for Axial SCX24. The kit is designed for the Axial SCX24 C10 but should work with other body styles, let me know in the comments. It is designed to be a fun joke to install. The trucknut holder piece should be glued into the…

Downloads
393
Likes
49
Rating
0
P
PrintablesJack

Lazy Susan - Axial roller bearing

Lazy Susans for plants or spools or plates or cakes - with optional clip keeping it together

Downloads
383
Likes
72
Rating
3.75
P
PrintablesRMTCTRL

Cantilever Suspension for Axial SCX10

I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…

Downloads
353
Likes
97
Rating
0
P
PrintablesZanthrax

Hinged body mount for Axial SCX10III Early Bronco

Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…

Downloads
351
Likes
30
Rating
5
P
PrintablesKlave

Small Axial Flow Cyclone Dust Separator

I have a small Stepcraft CNC router in my house and to keep the noise down I use a small Miele cannister vacuum cleaner with a bag and a secondary HEPA filter on a low noise setting to capture the dust and particles from cutting. I needed…

Downloads
333
Likes
69
Rating
5
P
Printablesikletti

Axial Capra body panels

Body panels for the Axial Capra. I designed them as two parts, so the inserts can be printed in a different color. You can even used two different colors for printing the insert to add more contrast :-) The hood is a two-piece design to…

Downloads
314
Likes
24
Rating
5
P
PrintablesStormCrow 13

Jin-Gitaxias

I was planning on finishing the rest of the Praetors for this week but I'm on round five with COVID (autoimmune diseases woo...) so I was only able to finish Jin-Gitaxias. If you want to help me keep making free models or to tell me what…

Downloads
299
Likes
44
Rating
0
P
PrintablesSilverBullet126

Axial CJ-7 - Scale Hinge and Vent Covers

Add a nice quick detail to your Axial CJ-7 with hinge and vent covers. There's two sets of files included. The “easy” one, has the bolts printed and you'll just need to use double-sided tape to apply them; you don't even need to take the…

Downloads
294
Likes
17
Rating
5
P
PrintablesDasumocat

Axial SCX10ii 1/10 scale Jeep front bumper

I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…

Downloads
287
Likes
42
Rating
0
P
PrintablesBen

Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links

High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…

Downloads
283
Likes
25
Rating
0
P
PrintablesRenegat-3

Stackable Heavy Duty Coaxial Planetary Gearbox

I designed this gearbox for actual mechanical applications, so quite a few bearings are used. I don't have actual photos available right now, but I build a two-stage version printed with regular PLA that runs at fairly high input speeds…

Downloads
283
Likes
117
Rating
0
P
PrintablesSilverBullet126

Axial Ryft RBX10 - Full Clamshell Roof

By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…

Downloads
281
Likes
7
Rating
5
P
PrintablesDamianB2

Axial-Radial Lead Bender

When building electronic an prototype, using a solderless breadboard or a PCB, you always need to bent leads of components to the correct spacing. A lead bender is a good tool for this. This design is a remix of OneByteGone's nice lead…

Downloads
278
Likes
44
Rating
5
P
PrintablesRemy

Axial SCX24 Micro Crawler Stand

Chassis stand for the Axial SCX24 micro crawlers Designed fairly generic so it should fit most crawlers.

Downloads
275
Likes
39
Rating
5
P
PrintablesRunge Kutta

Benchrest tripod with coaxial box

Follow the assembly instructions of the original designs (Mr. BCRC and DJ_Food). Minor personal adaptations to incorporate rubber feet and other modifications.

Downloads
270
Likes
24
Rating
5
P
PrintablesJustin B

Axial Flux Generator

A little axial flux generator made as an experiment for a vertical axis wind turbine. Fits on a 12mm shaft. It doesn't output much power but is a decent example nonetheless. You'll need a minimum build plate size of 200mm x 200mm to print…

Downloads
264
Likes
40
Rating
0
P
PrintablesPrinter

Axial SCX6 Honcho Rear Bumper for Trailer Hitch

I ordered an SCX6 trailer hitch but was surprised when it didn't fit my Honcho. So I designed a new rear bumper to make it work. It is modeled around a cheap ali express SCX6 hitch but I think they're all the same. The light holes are…

Downloads
263
Likes
27
Rating
0
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon

Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…

Downloads
262
Likes
29
Rating
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty

I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…

Downloads
259
Likes
36
Rating
0
P

Link Riser ar44-45-45p axial scx 2-3

Link Riser ar44-45-45p axial scx 2-3 printed in pla-cf.

Downloads
237
Likes
9
Rating
0
P
Printablesdemetrius

Axial Fan 40mm - Dummy

A simple axial fan dummy for help on your creation needs. Category: 3D Printer Accessories

Downloads
236
Likes
10
Rating
0
P
PrintablesDasumocat

Axial SCX-10 Jeep Wrangler Rhino Rack roof rack

I couldn't find a 1/10 scale roof rack that I liked. So I measured my real Pioneer Rhino Rack roof rack on my Jeep and scaled it down to 1/10. I decided to make the mounts magnetic so I wouldn't have to drill into the body of my Jeep…

Downloads
236
Likes
30
Rating
0
P
PrintablesJackey

RC holder for axial or wall mount shelf

RC holder for axial or wall mount držák na zeď/police rc modely, axial,buggy,monster truck 1/10 a některé i 1/8

Downloads
231
Likes
32
Rating
0
P
Printableskmccon

50 mm axial fan to 40 mm axial fan reducer

An adapter to enable using a 50 mm axial fan on a 40 mm axial fan mounting. Due to space constraints, you will need to thread the 4 mm bolts into the plastic. Print instructions Category: 3D Printer Accessories

Downloads
227
Likes
16
Rating
0
P
PrintablesRaptorHunter

Computer axial fan to blower fan 80mmx25mm

Use this to convert a 80mm axial fan to a blower fan, you need to break the blades and sand the original fan to convert.

Downloads
225
Likes
38
Rating
5
P
Printableslayer.shifted

4010 Axial Fan sidegrade for LS Fanmod(Neptune4)

For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…

Downloads
220
Likes
33
Rating
5
P
Printablestaeraeyttaejae

Axial SCX10II front chassis front bumper mount

Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…

Downloads
215
Likes
15
Rating
0
P

Axial Capra Link Riser

Bambulab X1C printer, BAMBULAB carbon filled PLA, 300mm/s, 232° Nozzle, 45° bed

Downloads
210
Likes
18
Rating
5
P
PrintablesIvan Stepanenko

Axial SCX24 Bronco ROCKSLIDER

Details need to be mirrored.

Downloads
208
Likes
44
Rating
5
P
PrintablesTeamK

Axial Capra and SCX10.3 - Mini-T Spring Perches

If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…

Downloads
205
Likes
20
Rating
0
P

Axial SCX10 III Portal AR45P Axelstand Rc Crawler

Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…

Downloads
198
Likes
28
Rating
5
P
PrintablesParalyzer

Servo Mount for Axial Capra 1/10

Designed for my Axial Capra after I broke the original. Works great for me, enjoy!

Downloads
198
Likes
18
Rating
0
P
PrintablesAndrew

Axial RC SCX24 Base Camp Bed and Roll Bar

Axial left the bed looking lame so dress it up with this cosmetic accessory. Prints in 4 pieces but looks like one piece in the file. Separate it into parts and arrange on the plate per my screenshot - flat sides down. Use a smaller…

Downloads
196
Likes
20
Rating
0
P
PrintablesZanthrax

Axial SCX6 Panhard brace

The panhard bar on the SCX6 is mounted single shear on both ends. No bueno. This brace reinforces the mount on the axle. Uses the stock hardware, no additional parts needed. To reinforce the chassis mount I recommend a metal shock tower…

Downloads
196
Likes
21
Rating
4
P
PrintablesSilverBullet126

Axial SCX6 - Battery Mount Extenders

Axial SCX6 battery extenders for the Gens Ace Bashing Pro 157mm 3S (8000mah and 6700mah) packs and the XL version for Gens Ace Bashing Pro 178mm (15000mah). New - Looking to get these tray extenders, but don't have a printer? Checkout my…

Downloads
191
Likes
11
Rating
5
P
PrintablesStele

Ender 3 S1 Sprite 5015 Blower + 40mm Axial fan-mount

Fanmount for a 5015 Blowerfan for partcooling and an 40mm axial fan for the hotend. The Blowerfan needs melt-in inserts to mount. The fanmount can be printed in PLA, the airduct must be printed in PETG or more heat resistant. Works great,…

Downloads
187
Likes
45
Rating
5
P
Printableselectro_nic

Supermicro 80mm Hot-Swappable Middle Axial Fan Holder (FAN-0118L4)

Modeled to replace the standard fans FAN-0118L4 with Noctua NF-A8 PWM fans in a 2U Supermicro Server SCE829. As stated by Supermicro the FAN-0118L4 is a standard fan for CSE-218UTS, CSE-219UTS, CSE-828TS, CSE-829, CSE-835XTS, and…

Downloads
183
Likes
18
Rating
0
P
Printablesbricoletout

Bumper AXIAL SCX10 II (2) (AX31392 and AX31393 substitute)

Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…

Downloads
183
Likes
24
Rating
5
P
PrintablesAmphitrite

Coaxial Helicopter Rotor (Propeler)

Modular Coaxial Rotor This is a highly detailed 3D printable assembly designed for compatibility with helicopter modular systems. Inspired by functional aerospace aesthetics, this coaxial rotor/propeller is perfect for hobbyists. Key…

Downloads
181
Likes
27
Rating
0

Enclosure fan ventilation (Ikea Lack) for a 92 mm fan with static pressure enhancer (axial compressor)

Ikea-Lack housing fan duct for a 92 mm fan with static pressure enhancer (axial compressor). Helps to extract odors from the enclosure and remove them using an optional 50mm suction hose. Update 05.04.2022: In order to increase fan static…

Downloads
174
Likes
61
Rating
5
P
Printablesdona97m

Hollow Display Turntable / Axial Ball Bearing

Hollow Display Turntable / Axial Ball Bearing Compatible with standard airsoft pellets aka BBs, 36 of them. Works even better with 6 mm steel balls. Smoothness : Super smooth, even more smooth with steel balls. Smooth even under heavy…

Downloads
172
Likes
87
Rating
4
P
Printablesles4

PVC Pipe Latching Axial Hinge

This is a 180 degree latching hinge for half inch pvc pipe. This allows you to connect two pvc pipes end over end and have them split apart. The latch firmly locks the pipes when closed. It works by locking a beam in with a spring and…

Downloads
169
Likes
71
Rating
0
P
Printablesmahnstr12

Gspeed 67mm skid TGH/Axial 4 hole

Quick little remix to work with the 67mm Gspeed Gshot builds. 38mm mounting accepts TGH and 3 gear Axial. Also more than likely accepts Enduro Stealth X transmission.

Downloads
166
Likes
19
Rating
0
P
PrintablesOwen White

Small Jet engine/axial compressor

Me and my friends thought it would be funny to use a jet engine to propel our boat for physics Olympics, so I am designing one. Meant to be run on a 3V motor run on a 9V battery. Held together with 6-32X2 in. nuts and bolts, main axle can…

Downloads
166
Likes
30
Rating
0
P
PrintablesBen

Axial SCX10 iii Basecamp Rock Rails

These are rock sliders that can be installed on the Axial SCX10 iii Basecamp. I printed these from Prusament PLA as a prototype and have yet to break them. If they break, I plan to use some Prusament PC blend CF. You will need two M3x10…

Downloads
166
Likes
24
Rating
0
P
PrintablesDionarap

conversion axial fan for radial fan

as I had no matching radial fan at home, I have a normal fan rebuilt.

Downloads
163
Likes
29
Rating
0
P
PrintablesZanthrax

Axial SCX6 trailer hitch tow ball

A trailer hitch that bolts up to the SCX6 rear bumper mount without any mods. I broke the ball hitch pretty quickly but it is holding op nicely now in TPU. Required hardware: 4x M4x22mm 1x M2.5x10mm Category: R/C Vehicles

Downloads
162
Likes
17
Rating
0
P
PrintablesDragonArtist15

Wiwaxia

3D reconstruction of a wiwaxia, an extinct invertebrate from the Cambrian period. I recommend printing it at a finer layer height or using a resin printer. For filament printers, the model should print fine without supports or with…

Downloads
162
Likes
13
Rating
0
P
Printablessuit

3D Printable Filament (Coaxial & Multi-Color)

Yo Dawg, I heard you like filament? So I made filament that can be printed out of filament! There are a few models out there that allow you to print your own multicolor filament — they work great and I have used them many times to create…

Downloads
156
Likes
25
Rating
0
P
PrintablesHivako

Coaxial Cable Stripper - RG58 / BNC

Coaxial Cable Stripper - RG58 / BNC Tool for stripping RG58 coaxial cable for BNC-type crimp connector. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm M3 screws and nuts. Print settings Fill density: 15% Fill…

Downloads
153
Likes
14
Rating
0
P
PrintablesBamJr

Dual stage axial fan

3D printed dual stage axial fan. This was designed as an airbrush booth fume extractor, but it's so loud it will never be used as such. DISCLAIMER: THIS THING IS NOT A TOY! I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY DERIVED FROM IT'S…

Downloads
152
Likes
46
Rating
0
P

Roof Rack For AXIAL SCX10 III JEEP JLU WRANGLER Rc Crawler

Scale accessory for Axial SCX10 III Jeep JLU Wrangler. Roof rack that can be mounted in the front, middle, or rear of the roof. There are two mounting options: either using double-sided adhesive tape or by screwing it directly through the…

Downloads
151
Likes
23
Rating
0
P
PrintablesFrozenBubble

Axial Flux Magswitch Toolchanger (built on Ratrig V-core 3.1)

There is a more complete publication on Thingiverse. (It's a competition entry). When the competition is over I will propagate it to here: https://www.thingiverse.com/thing:6804974 Video of it printing: Mechanism overview and how to…

Downloads
151
Likes
47
Rating
0
P
Printablesdb3jhf

Metal Detector Assembly with 10"/5" Coaxial Coil

This is a DIY Project for a Metal Detector. The diameter of the coils are 254mm (10") and 127mm (5"). When the coil is inserted you can use silicone to fix it and create protection against environmental effects (water,..). There is a hole…

Downloads
149
Likes
15
Rating
0
P
Printablesdjos_1475

Ender 5 Z-Axis Axial Thrust bearing Mount

This version is designed for the Ender 5 and may also work with the Sovol SV05. You will need longer M3 Bolts to install this upgrade. Z-Axis Axial Thrust bearing Mount. The Axial thrust bearing combined with a rigid lead-screw…

Downloads
148
Likes
22
Rating
0
P
PrintablesPatrol_maverick

Axial SCX6 tube rear bumper bar

I made this tube rear bumper bar for my SCX6 to suit the Pro-Line Racing Cliffhanger body. It's designed to be similar in styling to the tube front bumper file offered by Pro-Line on their website. I've also included it here too for…

Downloads
147
Likes
12
Rating
0
P
PrintablesBrainanator

Axial Wraith Flat Skid Plate

2021 Update: I don't recommend this design. Never got around to finishing it or making it work properly. Update 03/22/17: Updated to 3.10 version. Some tweaks to clearances around transmission. Update 03/16/17: Uploaded re-worked design.…

Downloads
146
Likes
14
Rating
0
P
PrintablesMindless

Axial SCX 10 ii big receiver box

A much bigger receiver box for stock SCX 10ii. Did it for a friend and cannot find his photos anymore. Print instructions Category: Mechanical Toys Summary A much bigger receiver box for stock SCX 10ii. Did it for a friend and cannot find…

Downloads
146
Likes
8
Rating
0
P
PrintablesPeter Sassaman

Axial Resistor Organizer

Made an organizing for 1/4 Watt axial resistors. Inspired by this very cool smt resistor organizer: http://aidetek.com/mm5/merchant.mvc?Screen=PROD&Store_Code=A&Product_Code=BOXALL&Category_Code=Encl

Downloads
144
Likes
20
Rating
0
P
PrintablesSilverBullet126

Axial CJ-7 - Accessory Bar Mount

An accessory bar for the Axial CJ-7, fits the passenger side by default (just mirror drivers side). Two files, one with 3 holes (fix two of my 1/10 Scale Off-Road Fuel Canister ) and one with no holes so you can drill your own. Update…

Downloads
142
Likes
18
Rating
5
P
PrintablesZanthrax

Axial SCX6 Spare Tire Cover

This is a lightweight spare tire cover for the Axial SCX6 Rubicon body. The shell is made up of 2 halves that twist together. My print in PETG weighs 50 grams. The dimensions are based on the stock Rubicon tires size. Included is a blank…

Downloads
141
Likes
13
Rating
0
P
PrintablesSwoop03

5010 to 4010 Axial fan adapter

Ran into an issue where a fan stopped working on my ender 2 pro. I couldn't find a 5010 24v fan to buy other than the one that came with it, that only lasted 20 hours of operation. So I drew this up to print out on my other machine. I did…

Downloads
140
Likes
6
Rating
0
P
PrintablesJack
Downloads
138
Likes
33
Rating
0
P
PrintablesCosmin

Ender 3S1 / Sprite side heatsink Axial fan

This is my attempt on using a silent 4020mm axial fan for cooling the heatsync. Haven't tested it yet during printing, but after my first tests on the bench, it feels like the airflow is about the same as the tiny radial noisy fan that…

Downloads
137
Likes
18
Rating
4.5
P
Printablesharry blackman

RTC Module for Triaxial Numechron Clock

The Real Time Clock module increases the clocks time accuracy. No need for tuning of the clock speed as described in the original model. The price for a DC3231 RTC model is usually less than 12€ for 3 pieces. The housing is made for an…

Downloads
137
Likes
18
Rating
0
P
Printablesmado30

Axial Wraith front lower cover engine compartment

Axial Wraith front lower cover so that less dirt enters the vehicle from below. Fits into the existing screw holes. Axial Wraith vordere untere Abdeckung, damit von unten weniger Schmutz ins Fahrzeug gelangt. Passt in die vorhandenen…

Downloads
136
Likes
14
Rating
0
P
PrintablesCraftyPinappl

Axial Capra UTB18 7 Slot Grill

The stock grill for the Axial Capra looks to be inspired by a Toyota Land Cruiser. I made this grill to look closer to a Jeep 7 slot grill. Sorry, no angry eyes.

Downloads
136
Likes
6
Rating
0
P
PrintablesC_Cheetos

RatRig / Rat Rig V-Core 3 - 808025 Axial Fan Holder for 3030 Frame Stepper Cooler

808025 Axial Fan Holder for 3030 Frame Stepper Cooler RatRig V-Core 3 uses 2x M4 bolts and nuts & 3x M6x12 bolts and 3x T-nuts (you probably have some T-nuts and M6x12 bolts left from your V-Core 3 build anyway.) If you already used your…

Downloads
134
Likes
23
Rating
5
P
Printablesmcmaven

Triaxial Quartz Movement Upgrade

This is an upgrade to my remix of A26’s original design, which was based on the Astronomia Triaxial watch mechanism. It can be used to replace the clock face of the remix with hands that are driven by an inexpensive quartz movement. This…

Downloads
134
Likes
52
Rating
0
P
PrintablesSilverBullet126

Axial Ryft RBX10 - Front Cage Protector

Axial Ryft RBX10 front cage/shock/stand-off protector. Keeps things a little cleaner and protected. If you can you'll want to print the top section (that raises up) with 4-6 walls for maximum durability; use PS modifiers to set this up.…

Downloads
130
Likes
6
Rating
0
P
PrintablesZanthrax

Axial SCX6 Servo Valve Cover

A second valve cover for your SCX6, based on the same thing for an SCX10III. Print without supports, stick on your steering servo with some double sided tape. Category: R/C Vehicles

Downloads
129
Likes
17
Rating
0
P
PrintablesJohn H

Creality Ender 3 S1 (any sprite model) 4020 Trik3 Cooling Duct, Dual 4020 Blower Fans with a 4020 Axial Fan, Ender 3 S1/S1 Pro/S1 Plus

Inspiration of Intent When considering an upgrade to enhance the part cooling capabilities of my printer, I prioritize two key aspects: notably reduced noise compared to the stock configuration and the ability to achieve higher printing…

Downloads
128
Likes
19
Rating
5
P
PrintablesJEBurroughs

40mm Fan Adapter-converter for 5015 Radial to 40mm Axial

40mm Fan Adapter-converter for 5015 Radial to 40mm Axial

Downloads
127
Likes
18
Rating
0
P
PrintablesFelix Morgner

Generic 30mm Axial Fan

This model is not designed to be printed, but rather to aid in designing hardware (for example a printer).

Downloads
126
Likes
2
Rating
0