4,651 models
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Print approx. €13.14–€16.06 excl. taxPreliminary estimate for one variant
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
Print approx. €9.99–€12.20 excl. taxPreliminary estimate for PETGSource material: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
This is a simple dust cover for the Z-axis mounts. They drop in place, and prevents most of the debris from falling into the Z-axis mount opening. Update: People noted that the clearances wasn't working perfectly anymore, so I checked the…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a very simple, super fast to print z-axis vibration damper for the original Prusa MK3. The Z-top parts for the MK3 are closed at the top. Still the hole for the z-rods on the top parts are much larger than the Z-rods: this is as…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Bambu Studio Strength Walls Detect thin wall “ON” Bambu Lab Z axis cover for P1P P1S X1 Thank you ;-)
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a beefed up Y-axis motor mount for the i3 MK3S with built-in end stop. The advantage of this design is that the linear bearings won't hit the backplate of the frame anymore to mark the back end of the Y axis. Instead, the belt…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
This is a webcam mount for an Ender 3 V2 Neo printer. It's made to press fit over the X Axis bracket and belt cover on the right hand side of the printer while leaving access to the belt tensioner knob. You'll need a screw to mount the…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
This model includes two replacement parts for the RC Monster Truck from Monster Jam Gear and axis which connects to the wheel The main gear which connects to the motor The positions of both gears are shown in the picture with an arrow.…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions large…
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
I have Z-Axis rattle noise since I have my MK3S+ and searched multiple fixes. Including here I found some. But nothing seemed to fix the issue that I have. However thanks to sabaatworld I actually found out why I have this noise. He has…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
This is a Z-axis guide with a thumbwheel that makes it easy to move the print head. This guide consists of two parts th
Print approx. €0.41–€0.51 excl. taxPreliminary estimate for one variant
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
I have gotten a lot of dust and filament scraps down into the deep holes of the z axis motor holder on my MK4S and I wanted some way to stop it from happening. I searched around Printables and found quite a few that I liked, but I thought…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Decorate your Prusa MK3 printer with this cute Prusa Pal Wolf that sits nicely on top of the z-axis parts. (Under 1 hr Print!)
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Prusa Mk4 Z Axis flat dust or debris or filament cover. This is a simple cover to prevent filament or debris from falling into the open holes in the tops of the z axis motors. There is no need to disassemble anything, these just fit into…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
This ballerina rotates with the movement of the Z axis. As a prerequisite, you will need a "z-axis-top" with a hole for the leadscrew rod as below. https://www.printables.com/model/389924-mk3ss-z-axis-top…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
A Phalanx CIWS to protect your printer from whatever dares to harm it! The Phalanx sits on the top of the Z-axis motor no magnets needed! Included are three parts the gun, base, and fastener. To assemble, put the rod through the base and…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Remixed the Y axis belt tensioner from the post below to use with the 4040 extrusion of the Ender 3 pro Remixed the Y axis puller for more belt adjustment Remixed low bearing height that caused the belt to rub on top of the 4040 Y axis…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Y Axis remake for use with bearing mount All parts are based on original Prusa i3 MK2 design. Print instructions y idler requires support. y corners have support build into design. BOM: 4x LM8UU M3 nuts and bolts
Print approx. €8.62–€10.54 excl. taxPreliminary estimate for PETGSource material: PET
Just print it in the orientation it comes, unbolt the top rail press it onto the end (you may need to hammer it lightly), then lower it back on over the rod and put the bolts back in. There is also a skeletonised option just because why…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
For this strain relief you'll need: 3x allen bolts M3x10 and 2x M3 square nuts Both should be included in the spare parts bag. Assemble: After printing clean all holes and cut off the brim Push both square nuts in the therefore provided…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
I don't like seeing the upper parts of the Z-axes lift during Z calibration, so I remade them to be stronger in the style of the MK4. Trust me, they're solid!
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
A strengthened remix of 3D-Fuchs' cable guide with longer support. I found the original support too short so I remixed to lengthen it. While I was at it, I decided to strengthen the support to reduce flex, and also made the mount thicker…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Strain relief for cables of X-axis motor. Snap fits into the motor. Sleeve for a zip tie for cable.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
I just wanted a knob that I had a hand in designing. This is a heavily remix of the original design from on onshape here model by “c”. Printing Layer Height = .20mm Primeters = 3 is pretty good Infill = 15% Orientation = print the top on…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This is V2 with 20mm Mounting Hole Distance for the new Cloudray K40 Laser Head with FL 25.4mm and FL 50,8 mm. It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
This is a small two-axis webcam holder to fasten inside of a printer enclosure. It requires no screws and the camera can be attached using the printed 1/4" camera screw. No screws are needed for the assembly. The parts have an…
Print approx. €6.64–€8.11 excl. taxPreliminary estimate for PETGSource material: PET
Hotfix for Z axis wobble (Anet A8 Plus) With the factory parts, the Z rods of the Anet A8 Plus are wobbling terribly. There are two parts per side in the game. On the bottom is the motor mount which includes the 8mm diameter hole for the…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Removes the strain on the cable. This design consist of two parts, a cable holder and a motor mount, and is easy to assemble. Slide the cable holder into the motor mount and fix it to the motor using a M3x10 hex screw. The cable is…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for PETGSource material: PET
With this mount you can attach a Wighead (25 mm diameter Hole on Bottom) to the Revopoint Dual-Axis-Turntable for Scanning. So you can easily send your life casted Wig heads per E-Mail or digitize your Wig heads. My recommendation is to…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
I designed these to add a bit of variation and help make dust less noticeable. Their main advantage is that nothing needs to be disassembled. They simply slide in from the side through their opening, fitting snugly without the need for…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
For mounting the hotend on an MGN12C linear rail on the X-axis Creality Ender 3 V3 se Zur Montage des Hotends auf einer MGN12C Linearschiene auf der X-achse Creality Ender 3 V3 se
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
I was unable to find the required magnets for the Optical Illusion Visualizer for Prusa Mini So i tried my best to make a remix inspired by the MK3S optical illusion for x-axis The connector is made for the Purse Mini+ but should be…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
English XYZ axis + ABC rotation The rotation rings ABC are mobile. Check that the rings can rotate easily before gluing the axes in position. Do not hesitate to adjust the bushings before assembly. CHECK THE DIRECTION OF THE BUSHES BEFORE…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Use at your own risk. This is a demonstration of makeability. I do not recomment using the product for nutrition. Be aware what you are doing. If you like to use the product for drinking, use a filament which is allowed for alimentation…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Have the best co-pilot watch over your prints with this BB-8 z-axis visualizer! It comes with a docking station that goes on top of the motor to house BB-8 and protect your motor from dust and the elements. The shaft connects with the…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
The shape of the bear is inspired by the logo of Grégoire Saunier's Bear Frame project (which of course is inspired in turn by the Haribo gummy bears included with Prusa printer kits!) I printed mine lying on its back, but it could also…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Remix of a remix. Holes widened for M6 screws with a tight fit.
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
This is a Z axis camera mount for the KP3S 3.0. This uses the low cost HBV-W202012HD camera module. Printer: KP3S 3.0 Filament: PLA Infill: 15% hexagonal Nozzle: 0.4mm Layer Height: 0.2mm Supports: organic, only touching build plate…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Prusa i3 Z-Axis: You will need a "z-axis-top" with a hole for the leadscrew rod as below. https://www.printables.com/model/389924-mk3ss-z-axis-top https://www.prusaprinters.org/prints/57941-mk3s-z-axis-tops-improved…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This X-axis bracket is designed for the Prusa MK4 and is an adapter for Sneaks articulating Raspberry Pi camera arm and for an optional reverse bowden tube for the MK4 (there is a .stl file without the reverse bowden adapter). Due to its…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Cover for Z-axis stepper motors bigger than original nuts. It cover whole hole. Do not require any printer disassembly. Express print, take only 14 minutes for one :) Versions ZAxisCover - If you forgot to add black nut during assembly,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
This is a camera X-Axis Arm Mount for Prusa i3MK3S+ or similar with the same X-Axis Arm. Adjustable swing arm angle. The RPi camera case is for a v2 but there is a Night Vision Camera case and cradle that I have also published. Face Plate…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Remix of TommiV's knob design that is completely blank and doesn't feature a logo. Use the included profile in the 3mf file to get the correct settings for the print. Fits snugly over the stock knob. The front panel is the Honey Comb…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This remix adds M2 hex nut slots in the bottom. Using M2x12 or longer screws you can raise the lid to adjust fit and tightness of the z-coupler inside the frame. I made this remix as my SV06 Plus' z-coupler did not fit inside the original…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Hey, schnell gedrucktes cover für die Z Achse 15% infill nozzle 0,4 auf 0,25 Structural Geduckt in 6 Minuten, hab spass happy printing Hey, Fast printed cover for the Z axis 15% infill nozzle 0.4 to 0.25 Structural Ducked in 6 minutes,…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is a modified z-axis bracket (top left) for a Prusa i3 MK3S. It extends out 150mm and terminates with a Go-Pro compatible mount. My work is all free forever. If you want to support my habit you can keep me caffeinated.…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for PETGSource material: PET
I have mounted the orginal bearings upside down and added more in the old place of them to make the carriage more rigid. But this also meant that the wobble fixes from others wouldn't work anymore for me. So I designed my own anti wobble…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
This is Prusa MK4 Z-Axis Temperature & Humidity Panel Mount. It is one of many my designs but first upload ever on Printables.com. Plug and Play. There is no need to modify printer in any way. Model is created with FreeCAD and exported to…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This is a replacement part for the Saitek Flight Rudder Pedals – specifically, the spring holder for the brake axis. The original plastic part broke at the point where the return/centering spring is attached. This 3D printed model is a…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Nut 65 mm , axis 90×35mm ( 75×35mm)
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
Thanks to Makers feedback who all-ready had MK4 Z-Axis dust-cover and wanted to combine with my MK4 Z-Axis temperature and humidity panel holder I added adapter version. At the moment added only LEFT side, but will add soon right side…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
I always liked the idea of the iOS settings icon on top of a stepper, but didn't wanted to cover my extruder stepper, because of the cooling of the motor bottom. Then I found the solution from Félix but it doesn't fit on the bear motor…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
See original item: 221546. Neck was weakened to allow path for pin: I printed with 40% infill to try and compensate--this probably wasn't necessary. It seems plenty strong.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a Wyze cam mount for the X axis for my Creality Ender 3 Max Neo printer. Slips over the existing X axis cover (remix of cover). I had to offset the camera a bit to allow room for the touch sensor. The hole is to route USB cable…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for one variant
The holes are 5mm in diameter, all kinds of screws that fit can be used
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Gcode contains filament exchange. Colored in edges lightly with Micron Pen to fake Occlusion
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This model is compatible with the z-axis support and spool holder linked in the remix section of this description. It replaces the foot mount right behind the screen you will also need to print two of the foot-01.stl files and one…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
V-notch face up on the build plate, almost any nozzle and layer height should work.
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Mounting adapters for Wabeco F1210SF mill. 2 distance blocks attach a 200mm Siton NTS-S Series scale to the Y-axis. A slider bar holds the reading head. Adapters use factory M4 threaded holes - no drilling and tapping needed.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
These are the brackets to mount a Z-Axis digital read out (DRO) scale and reader on a Smithy Granite XT 1324. The attached PDF file details each bracket and hardware needed. Both Spindle Bracket and Scale Guide are made from Esun blue…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
My version of a gyro spinner. Use all supports when printing too. 2, 608-spinner bearings 1, 4x50mm bolt 1, 4x70mm bolt 2, 4mm locking nut 3, 3/4" Stainless Steele Nuts from Ace Hardware
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
DRO Z-Axis mounting adapters for Wabeco F1210SF mill.
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
An optical illusion for the Prusa MK3S x-axis with mount for gyroscope.
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
I made this calibration tower right after I switched to klipper. And boy it makes a difference. It has a little overhang and distance test (0.2mm) too. Dimensions: 20/30x40/50x60mm. Printed on an Ender 5+, BTT SKR E3MINI V3.0, Klipper,…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
A cover as a possibility to transport books safely, designed as the guide book from the hitchiker's guide to the galaxis, DON'T PANIC!
Print approx. €25.77–€31.50 excl. taxPreliminary estimate for one variant
This is a mount for the Axis P1245 MkII camera mount inside the XL enclosure I prefer hardwired everything and less on the WiFi, Axis offers the P12 series as POE cameras with a small head, perfect for this application Suggest printing in…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
With this mod, you can place Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or similar parts. Inverse Version: Simply rotate the camera 180º on its own stand to invert the image, no need to make any adjustments…
Dust cover for Z axis bearings. Prevention is better than cure.
Update: From what I can tell looking at the MK4S R2 parts, they haven't changed at all. So the MK4 dustcovers should fit just fine on the MK4S. Unless if the X-axis go lower down on the MK4S than MK4, then it might be a problem. But I…
This is a precision 20mm XYZ calibration cube which improves on the typical calcube. There are two issues with the typical cal cube: 1) Hard to make an accurate Z axis measurement because either you have error from the squish of the first…
Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…
This is the original Z axis cover for the Bambu Lab X1C ! :) These Z axis covers protect the top F625Z bearings on the threaded Z axis rods in the Bambu X1 and X1 Carbon… The walls are pretty thin… so, you may need to enable “Detect thin…
A support brace for the Prusa MINI to stiffen the connection between the Z-axis and the Y carriage. Attach to the 3030 aluminium extrusions using M5 x 12 mm hexagon head cap screws and T nuts (available on Amazon, eBay, AliExpress, etc.).…
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
I believe that robotics has not permeated every day life because of the large costs generally associated with it, so I wanted to design 6-Axis Robotic Arm from the ground up. I wanted it to use 3D printing as much as possible. Everything…
Printed with wall line count at 2-3 and 20% infill. The original file has been uploaded. (FreeCAD)
This robot arm is (very) roughly styled as an 80% scaled version of the UR3 industrial robot. It uses the same design philosophy of simply placing a motor/reducer actuator unit at each joint, with six actuators stacked up to make a 6-axis…
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
Here's my 'Mk2' Vertical Axis Wind Turbine (VAWT). I've always liked the lines of these, but they really caught my attention a few weeks ago when I realised that I couldn't explain how they work. I'm now a lot less confused about how a…
Cable Clips for the X-Axis. Print Intrusions: PLA or better 100% infill Pair well with this one. This will protect you X Axis Cable from damage. Anycubic Tie Wrap Replacement for X-Axis
