444 models
The Noble NB4/NB4+ remote is really great, and the movable steering wheel ‘arm’ is nice to allow left and righ-handed driving, as well as going ‘flat’ for easier transport. The only negative I've found is that the wheel arm tends to move…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
You can tie shoelaces to this print as you would to the normal shoes to practice tying knots and loops. Printing: This is an easy print that does not need supports. I would suggest to use higher perimeter count to add rigidity - around 5.…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
The B4 Lens Mount is a historic videography lens mount format known for its weird characteristics, like its built-in chromatic aberration correction. Conveniently for 3D printer owners, the B4's flange depth is slightly longer than that…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
This is a handle for the Daikin BRP069B41 WiFi-Adapter (for my air-condition). There is no space to mount the WiFi-Adapter inside of the air-condition. Mounting with double-sided adhesive tape have not been considered for optical reasons…
Print approx. €2.53–€3.10 excl. taxPreliminary estimate for one variant
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
RC: Flysky Noble NB4 Protector リミックス可能 必要：M3 Bolts 上下取付可能
Hand modeled 3D rocket. Artist's rendering (mine) of RPG-2 B40 rocket from Russia. It is dimensionally accurate if you do your part in printing. I recommend 0.2mm layer heights. It will take a long time, but it will look great. I have…
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
Remixed from 2 items, thanks to those users for their starting points! https://www.thingiverse.com/thing:4094861 https://www.printables.com/model/251514-noco-battery-jump-starter-mount/files I wanted to make a hard case for my NOCO GB20…
DESCRIPTION Here a replacement comb for this Remington trimmer, because mine broke by falling several times. The replacement part is available for 2$ on Remingtonproduct.com , but they don't ship outside the US… Reference: Adjustable…
I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…
A simplified 3d model for the EBB42 V1.1/2. The 3d model from GitHub done by the BTT is too big and it kills my CAD.
The Deutsche Bundesbahn commissioned 3 types of 4 axle Umbauwagen. https://de.wikipedia.org/wiki/Umbau-Wagen_(DB ) I have setup a modular design of half carriages. This makes it easy to create the other types of 4 axles Umbauwagens. Using…
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- The Y-type lorry was one of the British trucks…
Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…
The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…
Backside mount for the EBB42, works with and without the filament sensor Recommended print settings Use PETG, ASA or ABS for the motor mount, the EBB mount and the cover can be printed in PLA Infill: 35%+ Wall lines: 3 Bill of materials…
Screen Protector Frame for FLYSKY NB4 Test fitted on the NB4+ but should also fit the standard NB4 and the NB4 Pro Uses 2 x M3 countersunk screws to attach the handle end onto the frame. Embedded flysky logo in the frame if you want to do…
Asrock B450 Pro4 IO/shield. Category: Electronics
Here is the Asrock B450m Pro4 IO/shield. Enjoy! Category: Electronics
EDIT 19/05/2024 - Added a new version of the X carriage which is much more compact (and thus better CG location) BUT limits slightly the print volume on the x-axis ( +5 mm max on each side of the X carriage lost compared to the previous…
Fix of LaunchPat's L-Boxx baseplate , printable on a prusa mini.
Prints without supports upside-down, is compatible with 3 slot GPUs and you can cut off some hight in the slicer, if you have more compact cables Assembly Plug the GPU into the adapter Insert the middle (M2) rod and attach it with a…
IO Shield for the Asus TUF Gaming B450M Plus motherboard, modelled in openscad.
Designed for the Apache 1800 case, for one Polk db462 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…
DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used
This is a modification I made to one of our Vorons, I wanted to use a CAN based toolhead PCB to reduce wire break issues but wanted to keep the cable drag chains. This is what I ended up with and it works great! You will need: -…
mine have been made out of overture black super pla+, working like a charm ever since.
This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…
Because there is no Killflash on the Market for the MB4412D Sniper Rifle Scope, i designed a killflash on my own. This killflash is maybe not as good as it could be so you are invited to improve it! This basic sample was good enough for…
Allows you to use EBB42 attachment with Voron. I use it with LGX on my Voron2.4. BOM: 7 threaded inserts 3 M3x22 Socket Button Head Cap Screws 7 M3x6 any screws (4 to hold EBB42 and 3 to hold dragchain) Print settings: 0.4 nozzle 4 walls…
"A" pillar with place for BTT EBB42 PCB for 4 line pico MMU. Full Documentation for pico MMU https://github.com/lhndo/LH-Stinger/wiki/Pico-MMU
IO Shield that fits an MSI B450M PRO-M2 MAX
Designed for the XRAY XB4 2024 4WD Buggy. This is the first version of the front shock tower protector, feel free to give feedback on likes/dislikes. I recommend printing in PLA-CF, it seems to be virtually indestructible with CF filament.
This replaces the EVA cable guide mount with a frame to attach a board meant for a 42mm stepper such as a BigTreeTech EBB42. If you are running input shaper on klipper you will need to set axes_map: z, x, -y This does mean that there is…
Traditional design of B4 mount cap for cameras. Has decorative spoke to find which side should face upwards. Use ironing. Tune you supports well and remove them properly. Their remains shouldnt get in your camera :) DONATE ETH/Polygon:…
Just a small adapter plate to add a ebb42 can board to a H2 Extruder. Recommended this be made from aluminum or a high temp plastic anything with a Glass transition temp of 100+C especially if your printing in a high ambient temp…
EVA 3 compatible mount of BigTreeTech EBB42 Toolboard and Phaetus Apus extruder. BOM Note: Some screws can be salvaged from the Apus itself EBB42 Item Qty Description M3 x 4mm Heat Inserts 13 6 for extruder mount, 7 for toolboard mount M3…
Rack mounting bracket that allows you to put a Mikrotik RB4011 in a 10" soho type server rack. Caveats The RB4011 is slightly wider than the space between the rails, which means a small portion of the routers face will be behind the rail,…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and 3.90mm and use a prime pillar
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
Print with support. You need 2 M3 Screws and nuts. Also a screw to mount your GoPro.
This is the SFX version of the power supply cage. There is a flat-back version and one with integrated spacing at the back. The spacing is optional but reduces cable management room behind the PSU. The flatback version is easier to print…
It can hold phones in different sizes (tested with Pixel 4a with rugged case and iPhone 11 with …a big case). Sits quite loose in the tray to reduce the risk of scratches when inserting. A simple rubber band can improve the fit. Consider…
Remixed glol 's model so that it s a more snug fit for the PABS 18 Li B4 and added holes for the thread inserts. Photos should be self explanatory, minimum work on the drill is needed.
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
Bolts directly to chassis thru 2 holes in the bottom plate, right behind the motor (on 22`models)
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
Snap in (and out again) your OWC Thunderbolt 4 Dock (OWCTB4DOCK). The mount can be fixed either with screws or with adhesive strips. The space inside is dimensioned for the feet of the dock to point inside the mount, i.e. having the dock…
IO Shield for AMD AM4 Asus PRIME B450M-A Micro ATX Motherboard. Recommend PETG or PCTG.
I made this stand to support the rotary tool on my ComMarker B4 2W laser since it hung off the bed. Video showcasing the model:
Another second-hand case where the seller didn't send the IO shield. I couldn't find a free download anywhere on the internet, so I came up with a nice design using my old designs and another similar MSI model IO shield. Just using…
XRAY XB4 Composite Battery Clamp XRA326177 XRAY XB4 Short Composite Battery Holder Stand XRA366143 Printed material Prusament PET-G
This uses mostly hardware that the voron 2.4 uses as well as hardware that the LGX comes with. You will need an additional limit switch, 7mm ball bearing and 3010 blower fan. Some supports needed Print with voron print settings The…
Haken zum Schrauben b40 d4
Es handelt sich um einen Adapter wenn ihr einen ebb36 habt aber einen ebb42 montieren wollt.
I recently got a NOCO Boost Plus GB40 and while the device itself is great, the included storage and transportation bag is small and fiddly. While thinking about a proper way to store the power bank within my car, I stumbled over a nice…
Replacement adapter for FlySky Noble NB4 wheel. Print with support on edges. There is a built in bridge as support for the screw hole, just remove the bridging layer after print.
Thumb steer to replace the original adapter between your NB4 and the steering wheel. Still updating the design, so please leave comments to help me make improvements. It will add about 3mm width to your NB4, so I use a longer M3 screw for…
This is a mount for the Bigtreetech EBB42 Can modul
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
(English below) Wieder so ein Kleinteil, das gerne mal bei deinem Audi 80 B4 bzw. Audi 100/A6 C4 abhanden kommt: Dieser kleine Schiebeschalter der Leseleuchten in den Angstgriffen (Teilenummer der Leseleuchten zum Vergleich: Audi 895 947…
An 11B4 Mouthpiece in two variants: beautiful (with decorations) and functional (simpler and thicker, more resistant). I recommend printing it backbore side down (cup side up) in order to obtain a smoother rim. This will make the print…
This bracket for the Lian Li B4 allows you to mount a PSU in the "reference" layout. Adding step files as well, feel free to edit it as you want!
A Gridfintity baseplate to fit a new L-Boxx. I have divided it into 6 parts to fit smaller printers. I also have a second design to fit the older L-Boxx. On the pictures you can see the V1 with a 9x6 Grid, the V2 has a 9x7 Grid.
1/25/23 - Added a second version where the top strain relief is removed and zip tie holes are added to the left side. I found it more stable when securing the cable on the side removing the flex that was present in the upper part of the…
My friend made this STL because the board he gave me didn't have a shield said I could upload it here as we were unable to find one pre-made. Using the defaults for PLA will result in PLA spaghetti, see the settings below. PETG would…
Official documentation: https://routerboard.com/CA150 . After realizing that every piece of RB450G is different, I had to make universal adjustments. So, the modification in version 3.
NCC - ODOMETER GEAR - AUDI 80 B4/B3 QUATTRO CABRIO S2 RS2 100 80 90 - Common fault, mileage stops reading - 99% of the time its this gear has fallen apart. print in whatever lol, TBH I did a PROTOTYPE in PETG and its still solid 9months…
german version below This is an interior design which kind of matches the outside description of the coach: A4 ümg which was to my knowledge a compartment coach. As I didn't find nice or affordable interiors I designed that one my self.…
Mockup of Bigtreetech's EBB42 Gen2 v1.0 for use with modeling mounts, etc. Generated in Fusion 360 based off the images of the board on the BTTWiki. PCB components were pulled from GrabCAD and may not exactly match the product. Please do…
People always complain about these breaking so i quick scanned it and cleaned it up for when I need it. Print instructions i haven't printed it yet so let me know what you come up with!
A simple stand for the Sony SRS-XB41 mobile speaker. I made this a long time ago, might as well upload it. Printing it is pretty straightforward. It should have a high layer count, otherwise you might get holes inside of the bottom. There…
A mount for a Big Tree Tech EBB42 CAN Bus board, to mount on the EVA V3 extruder (only when using 40mm print cooling fan duct). For my setup, i'm using an Orbiter 2.0 extruder, should fit with other extruders also, but might be tight. The…
Included two STL files - white part and black part. I printed ok without any supports or brims.
Fan Mount for BTT EBB 42 You need: 2 x M3 x 12mm 2 x M3 x 35mm 1 x 40mm Fan
Design for a CAN Toolhead board to suit a MicroSwiss NG Extruder setup with a MGN12H Linear Rail
ZWO ASIAir Tripod Mount - ZWO TB40 Category: Hobby
Will need: 4x 3mm heat inserts 6x M3 6mm screws 3x M3 8mm screws 2x 20mm standoffs
I have re-modeled all the pieces to accommodate a Stealthburner with the following modifications: Chaoticlab TAP CNC (I am pretty sure everything works just as well even if you do not have a TAP, however it is untested) Bigtreetech EBB42…
This custom box can hold the jumper cables for the NOCO Boost Plus GB40. It may fit other models with the same form factor. I have only confirmed the fit with the GB40. A STEP file has also been provided to allow someone to possibly…
This is a Body Cap for B4 Broadcast Cameras. Support is part of the model, print it with 0,12mm layer height and make sure you slicer skips only one layer in between the model and support. If the support sticks to well to the model reduce…
V2 バージョン Separate Type RC:Flysky Noble NB4 Gopro マウント 2ファイルを別々に印刷が良い mount_V2-2は八角形、mount_V2-3は丸、どちらも取付可能 あなたの使いやすい物を選択して下さい。 1-base レイヤー: 0.2mm インフィル: 50% サポート: No 2&3-mount レイヤー: 0.2mm インフィル: 100% サポート: 必要： M5 nut, M3 bolt
It's a screen protector for the NB4 from Flysky. I did that to make sure the screen stays safe in my bag during transportation. It slides easily on top. I kept a space between the protection and the screen to avoid any risk of scratching.…
Recently purchased the NB4-radio and really liking it. A pack of features, easy adjustable, … given the reasonable price. However I had to get used to the steering wheel which I found rather small … so designed a new one. As I had no foam…
Holder for 4 Lenses and accessories of ComMarker B4. One Model is with Lenses dimension and the other is without.
Printed in PETG for testing purposes; printing in ABS is recommended. I used 10% gyroid infill, 5 top and bottom layers.
A cover for the EBB42. The bottom for this cover is here (for the smaller version): https://www.thingiverse.com/thing:5942676 I used 3x50 screws: Bondtech extruder + thickness https://www.thingiverse.com/thing:4122337 between extruder and…
This is a collection of extra parts by 42.Computer for the “Microlab - Mini Modular Home Server Rack” by CB4D. The original design is very useful so I thought I'd be a good community member and contribute any parts I design for my own…
Just a quick remix of mmuellerphoto EBB42 Mount with heat inserts. Check him out and his many mods for the RatRig community. You will need 4 of the standard EVA 3.x heat inserts (4,5x4mm)
3D Printed temple tips on my old rb4228m scuderia ferrari collection When my temple tips started to brake i decided design and 3D print new tips and it worked well. Need to be printed with a felxible filament. You need a heat gun or a…
I have printed & installed this design personally. But it is considered an experimental toolhead design as I do not have many hours on it. It allows you to use your Sprite extruder with an MGN12H rail on the X gantry. Belt hooks in this…
Mount for the BTT EBB42 CAN Toolboard and Microswiss NG extruder for Ender 3 / CR10. Rather than mounting this directly on the stepper, this allows the board to be mounted horizontally to preserve function of the ADXL chip (at least for…
german version below This is an interior design which kind of matches the outside description of the coach: B4 ümg which was to my knowledge a compartment coach. As I didn't find nice or affordable interiors I designed that one my self.…
Edit: You must remove the RGB, I2C, and PROBE pin headers on the EBB42 to fit the tested models. I desoldered the pin headers, but cutting them off with diagonal cutters is probably good enough. I added an untested version of the x0 arm…
![MSI B450M-A [A320M-A] PRO MAX IO SHIELD](https://media.printables.com/media/prints/4473f74d-ef70-41f1-8342-33365d03dc83/images/10909405_7f874eb5-c4e6-43da-848d-dd0e018cd8ad_15f32e9b-0376-414d-8d81-ce77bddd999a/img_3857.jpg)
