P
PrintablesSzymonRychter
WALL/DESK CLOUD LED BEDSIDE LAMP
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
- Downloads
- 470
- Likes
- 128
- Rating
- 5
Search results: bedside
341 models
P
PrintablesSignum
Bedside phone holder
Lightweight and sturdy phone holder to put between bed frame and mattress.
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
- Downloads
- 331
- Likes
- 130
- Rating
- 0
P
PrintablesDaniel Ryan
Bedside Table Organizer
I wanted the bedside table catchall from the thumbnail of the catchall contest, but it didn't seem to exist, so I made it! A few small modifications to fit the shelf in my headboard, and a spot to put spare change, or in my case, earplugs…
Print approx. €9.73–€11.89 excl. taxPreliminary estimate for one variant
- Downloads
- 292
- Likes
- 72
- Rating
- 5
P
Printableseddyjay
Bedside Shelf for Bunk or High Beds
My daughter sleeps in a High bed, and therefore hasn't any nightstand to put the alarm clock. So I made a small shelf that fits on the sideboard of the bed. I printed in PLA but split the piece in half and then glued, just to prevent…
Print approx. €16.32–€19.95 excl. taxPreliminary estimate for one variant
- Downloads
- 259
- Likes
- 98
- Rating
- 0
P
PrintablesChuck Sterling
CatchAll for bedside
Printed in two sections not requiring support, with interference fit that also negates glue. I printed the example at 0.28 layer height with two walls and 20% infill. I think it would be better at 0.20 layer height with four walls. Later…
Print approx. €9.92–€12.13 excl. taxPreliminary estimate for one variant
- Downloads
- 231
- Likes
- 97
- Rating
- 5
P
PrintablesmoWerk
Bedside shelf and phone holder - fits 3cm boards
Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…
Print approx. €7.31–€8.93 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 210
- Likes
- 37
- Rating
- 5
P
PrintablesRikimanto99
bedside table for Ikea STORÅ bunk bed
bedside table for Ikea STORÅ bunk bed printed in PETG 60/70 % infill
Print approx. €19.97–€24.41 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 122
- Likes
- 27
- Rating
- 5
P
PrintablesSeabird HH
Bedside Lamp (Box), LED 12V, 2.5W
Based on "PLAzzy, 12V LED Dog Lamp" https://www.prusaprinters.org/prints/20323-plazzy-12v-led-dog-lamp I designed this bedside lamp. I have tried to capture the working steps and the assembly in photosl For this project you will need: 1x…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
- Downloads
- 78
- Likes
- 28
- Rating
- 0
P
PrintablesHenk
Ikea Nävlinge as light for bedside reading
I recently purchased two Ikea Nävlinge lights for bedside reading and loved their sleek design and ease of installation. However, the light was too intense for my taste, and it disturbed my wife while I was reading. The lamp emits 220…
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 59
- Likes
- 13
- Rating
- 5
P
PrintablesDJ
Auping Auronde bedside caddy
Great for : tissues, phone, remote, nasal spray, small book, keys, small trees and melons. Print parameters Printer : Prusa Mini+, FW 6.1 Material : PLA Nozzle : 0.4mm Layer-height/profile : 0.2 mm speed Supports : none Input shaper :…
Print approx. €10.48–€12.81 excl. taxPreliminary estimate for one variant
- Downloads
- 45
- Likes
- 9
- Rating
- 0
P
Printablesgimpelginster
Bedside Table with Construction Bricks
Material filament 2x wood board (20mm thick, 200mm wide, variable length) 8x wood screw some construction bricks (LEGOs) Assembly Place the two equally long boards onto the 3D printed parts and screw them in place from below. Next: build…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 21
- Likes
- 23
- Rating
- 0
P
Printablesmystastian
Parametric Bedside Phone Holder - Customizable for Any Phone & Bed Frame
Keep your phone within arm's reach — no nightstand needed. This bedside phone holder hooks securely onto your bed frame and holds your phone upright in a sleek honeycomb pocket. Grab it in the dark, charge it overnight, done. Fully…
- Downloads
- 1,679
- Likes
- 680
- Rating
- 4.6
P
PrintablesBeiro Falone
Bedside Caddy
I designed this organizer to sit on a bedside table, to hold a phone, a smart watch charger, an e-reader, and with a small drawer for things like earplugs, chapstick, etc… The caddy itself is 6.75" deep, 5" wide, and 2.625" tall. The…
- Downloads
- 989
- Likes
- 605
- Rating
- 5
P
PrintablesRad Nerd Works
Bedside Cup Holder
I designed this so my kids could have a cupholder right next to their bed without having to have a table there. I designed the dimensions to clip onto their bed frame. It would be an easy remix or re-scaling to get it to fit your bed…
- Downloads
- 803
- Likes
- 181
- Rating
- 4.67
P
Printablescompy
Universal bedside phone shelf
Hi, this is a bed-side phone shelf nothing else, enjoy
- Downloads
- 632
- Likes
- 256
- Rating
- 5
P
PrintablesGodard Scientific
Bladeless PC Noctua 120mm Fan for Workshop, Desk, and Bedside Use
WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…
- Downloads
- 550
- Likes
- 168
- Rating
- 5
P
PrintablesRaphael
Bedside lamp lamella
Bedside lamp, a matching ceiling lamp is in my profile. I created a lampshade based on the Zuzanna Lamp by LeFabShop, as i liked the idea but wanted something with a little bit more hight for a ceiling lamp. Translucent if printed with…
- Downloads
- 453
- Likes
- 132
- Rating
- 5
P
Printables3DPrintBunny
Bedside Bookshelf
A bookstand to go on your bedside table that holds the next five books you are planning to read. What shall I read next? Easy to print with no supports @3DPrintBunny
- Downloads
- 429
- Likes
- 212
- Rating
- 5
P
PrintablesGuZZLo
Bedside table
I had to make a bedside table for my wife, but she didn't think it would work with a 3D print. So here it is. In the picture I printed a special version just for a magsafe charger, but there is a clean version included, and a STEP-file.…
- Downloads
- 374
- Likes
- 117
- Rating
- 0
P
Printablesjustdanok
Bedside Hanger Basket
Fits ideally over beds with a 22mm edge.
- Downloads
- 343
- Likes
- 105
- Rating
- 5
P
PrintablesEnely
Bedside Table
Bedside table sized for Sylvanian Families or Playmobil. Designed to fit with my bed & bunk bed . The book can be found at PrusaPrints The cartoonish alarm clock in the picture can be found at Thingiverse Read more about ongoing work at:…
- Downloads
- 341
- Likes
- 92
- Rating
- 5
P
PrintablesPeter H
BEDSIDE TABLE - NIGHTSTAND ( PRINT-TABLE #1)
OVERVIEW This is the first prototype of a series of furniture pieces developed around a “construction kit” philosophy, in which printer-sized components can be simply assembled with minimal experience to create customised furniture…
- Downloads
- 326
- Likes
- 247
- Rating
- 5
P
Printables3DPrintBunny
Bedside shelf
A small bedside shelf to hold glasses, pods, watch etc. The shelf is telescopic and is secured by the weight of the mattress. Prints easily with no supports Comes with 2 trays one solid and one with a hexagonal mesh base. Loads more…
- Downloads
- 304
- Likes
- 108
- Rating
- 0
P
PrintablesTeque5
Fitbit Sense / Versa 3 Bedside Charging Bracket
Simple bracket for the Fitbit Sense to sit between the bedside table and the bed without any wires. Charger clicks into place with USB cable going out bottom and the bracket has a built-indentation for “Medium” 15x60 mm 3M Command…
- Downloads
- 266
- Likes
- 39
- Rating
- 5
P
PrintablesState of Grace Industries
Bedside Yoto Player Holder
Yoto Player Holder that fits over a standard bunk bed frame. I printed in PLA+ at 50% infill. Unfortunately, support is needed to print the lip which goes over the bed. Even with the support and 50% infill, though, this printed in about 1…
- Downloads
- 214
- Likes
- 16
- Rating
- 0
P
PrintablesLxL3D
1:6(Play/Fashion) Scale Doll House Bedside Table NO SUPPORTS
1:6 scale bedside table. suitable for barbie sized dolls, or other dolls that fall in the 1:6 Fashion/Play scale. Model designed to be printed with no supports, and fitted together once printed and painted to your liking. Other 1:6 scale…
- Downloads
- 208
- Likes
- 91
- Rating
- 0
P
PrintablesCash Lo
Bedside Gadgets Holder
Simple fully customizable bedside organizer for holding gadgets, from one phone to a whole family of gadgets. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.3mm Infill: 20% Category:…
- Downloads
- 205
- Likes
- 50
- Rating
- 0
P
PrintablesThorb
Bedside Buddy Bin
When the “big cold” hits, used tissues start piling up everywhere. Lying in bed, there’s usually no trash can nearby, and soon the tissues begin to stack up on the nightstand. This isn’t very pleasant, hygienic, or nice. It’s even…
- Downloads
- 205
- Likes
- 190
- Rating
- 0
P
PrintablesBrian Hedrick
Bedside Phone Holder
A simple but elegant bedside or office table phone holder! Accepts both Landscape and Portrait positions for any phone.
- Downloads
- 191
- Likes
- 20
- Rating
- 0
P
Printables3DDIY
Bedside Lamp and Book Rest
Not an original design. I saw something that was way overpriced and thought i can recreate it with what I had on hand. This light is shaped like a house. Where you can rest your book face down to make a roof holding your page where you…
- Downloads
- 189
- Likes
- 65
- Rating
- 5
P
PrintablesPeter Martin
The Mag-Dock Pulse - Magsafe Bedside Charger
MAG-DOCK PULSE Bedside Mag Safe Charger Stands for iPhone standby mode. There are currently 4 versions to choose between, depending on the charging puck you currently have. Mag-Dock Pulse - Iphone NEW Puck - for use with the new charging…
- Downloads
- 186
- Likes
- 56
- Rating
- 0
P
Printablesjodo
Shelf (bedside table) for Ikea Småstad loft bed
A small shelf that fits perfectly as a bedside table for the Ikea Småstad loft bed. The model include the base and a border that you glue on top so that things don't fall down. There are models for a left- and a right hand shelf depending…
- Downloads
- 180
- Likes
- 48
- Rating
- 5
P
PrintablesMY
Bedside 3x Remotes/Phone Holder
New: Remotes_Plus_Phone_Holder_V1 [ OnShape Model ] Holds 3x remotes + phone Extra mounting point at the bottom Remotes_Holder_V3 [ OnShape Model ] + Chamfer to support top bevel printing + Better transition between basket and top
- Downloads
- 170
- Likes
- 40
- Rating
- 5
P
Printableshappyclayton
Bedside Corner Shelf
This is a bedside corner shelf designed particularly for those with cabin beds or similar, making a traditional bedside cabinet impractical. It has two shelves and a slot designed to hold a kindle. There is cable routing to both shelves…
- Downloads
- 167
- Likes
- 46
- Rating
- 5
P
PrintablesIlana H
Bedside/nightstand storage organizer
This is a 23cm x 21cm storage container for your home or office. I designed it to keep my stuff from falling off my nightstand. It is adaptable if you would like to make changes to fit your lifestyle. Updated: I added a smaller version…
- Downloads
- 156
- Likes
- 27
- Rating
- 0
P
PrintablesBartosz Wilk
Xiaomi camera C300 bedside bed frame holder
Xiaomi camera C300 bedside holder layer height: max 0.2 mm material: PLA, PETG, ASA/ABS Print with supports if the bed frame is too narrow, you should add felt pads. Feel free to remix
- Downloads
- 152
- Likes
- 25
- Rating
- 0
P
PrintablesMagichobos4321
BedSide Catch All Tray
About: This is catch all tray I designed with some patterned sections. Alot of the other trays seemed kinda jank or bland so I wanted to see if I could do better. The tray itself has 3 flat slots for keys, wallet, sunglasses, etc. and in…
- Downloads
- 148
- Likes
- 42
- Rating
- 5
P
PrintablesTangado
Malm Bedside Table (old Dimensions)
A Table that fits the old Malm Bedframe (50*75mm). Prints on the Side without Supports, scale Z to your personal preference.
- Downloads
- 146
- Likes
- 27
- Rating
- 0
P
PrintablesNed Lex
Xiaomi bedside lamp moon cover
This is a 3D model of a moon lamp cover that is designed to fit over a Xiaomi bedside lamp. It is made of PLA filament and has a realistic texture and color of the moon. It has two versions: one with a hole at the bottom for the cable and…
- Downloads
- 145
- Likes
- 40
- Rating
- 0
P
Printableskiwi
suwem高低床杯架 Bedside Cup Holder
女儿的高低床没有合适的杯子架，特地设计了一个，再不用担心猫会把杯子子打翻了。
- Downloads
- 139
- Likes
- 16
- Rating
- 5
P
PrintablesToni
Basic bedside table in two versions
I printed in PETG and 10% infill since it does not has to face higher weights. Also i added a small cable passthrough. I made a V2 (also included) with less material used and basically same strentgh.
- Downloads
- 134
- Likes
- 44
- Rating
- 0
P
PrintablesSeabird HH
Bedside Lamp (Tube), LED 12V, 2.5W
This is a further development of the bedside lamp with the box shape https://www.prusaprinters.org/prints/20852-bedside-lamp-box-led-12v-25w . Now this lamp had become a tube shape and you can print the backside as switch or dimmer…
- Downloads
- 134
- Likes
- 31
- Rating
- 5
P
Printables3DPrintingDadster
Bedside Cup Holder
This cup holder fits well onto a bedside wooden rail that is around .75" deep. Material: PLA Infill: 25% Wall Thickness: 4x
- Downloads
- 133
- Likes
- 19
- Rating
- 0
P
PrintablesLuis Pérez Fidalgo
Bedside Caddy ( Samsung Watch Remix)
Just follow the original instructions to print it: Print caddy on its back. Print drawer in its working position. (Supports may be needed deppending on your printer overhang capabilities)
- Downloads
- 128
- Likes
- 23
- Rating
- 5
P
PrintablesTooly
bedside cable holder
this is a simple model I whipped up for a friend, though id might as well share it here. should be glued with double sided tape or anything really. hope this helps!
- Downloads
- 123
- Likes
- 30
- Rating
- 5
P
Printablesgimbogandalf
Bedside Tray
This is a bedside tray that is mounted on the bed side rail or guard rail. Tray size is 180X200mm Rail width is 28.3mm (+ 0.2 tolerance) Better to print on the side to increase strength and avoid supports Print Settings Printer Brand:…
- Downloads
- 120
- Likes
- 21
- Rating
- 0
P
Printablesprint3dcy
Lana Bedside lamp
This is a copy of the Lana from Netflix's series "Too hot to handle". The design was made from photos of the real Lana, so the dimensions may differ from original. The assembly consists of 3 parts: 1)Bottom part 2)Transparent part 3)Top…
- Downloads
- 120
- Likes
- 6
- Rating
- 5
P
PrintablesDaire O Connor
Bedside phone and glasses holder
This is a simple wall mountable phone and glasses holder that can be easily mounted using double sided tape to any flat surface. It will easily hold any modern smartphone in a easy to access location along with a pair of glasses or…
- Downloads
- 119
- Likes
- 25
- Rating
- 0
P
PrintablesDelukart
Ikea malm bedside pocket
i needed a pocket to hold my apple controller and other things on my side of the bed where there is no room for a table. easy print with no supports . Print Settings Printer: custom cartesian Rafts: No Supports: No Resolution: 0.30…
- Downloads
- 116
- Likes
- 30
- Rating
- 5
P
PrintablesJonathan Vester
Hexagon Bedside Cell Phone Holder
I really liked the original model. But like others, I wanted one with hexagon cutouts. Thanks for the base model. Printed in Polymaker Light Green PLA Pro.
- Downloads
- 116
- Likes
- 14
- Rating
- 0
P
PrintablesLeeprechaum
Bedside table for dolls
Bedside table in 1:12 scale for doll houses. The fit in the drawer is kinda loose for commodity. Body is to print on its back with supports on the legs. Drawer is to print it on its bottom. 45 mm l x 30 mm w x 50 mm h
- Downloads
- 113
- Likes
- 30
- Rating
- 0
P
Printablesmshipman
Parametric Twist Canister (Bedside/Travel Earplug Holder)
One evening while dropping my earplugs repeatedly whilst trying to get into bed (which are IMPOSSIBLE to recover quickly if you're sufficiently nearsighted, by the way) I had the idea for my ideal earplug container which would be easy to…
- Downloads
- 113
- Likes
- 25
- Rating
- 5
P
Printableshobby_grade
Bedside Phone Pocket
Tired of rolling over your phone when you charge it in bed? Do you use your phone as a remote to your TV and get tired of losing it in the sheets? Don't have a night stand? Well this bedside phone pocket is just for you! Designed to fit…
- Downloads
- 110
- Likes
- 20
- Rating
- 5
P
PrintablesKT Prosthetist Orthotist
Bedside Table, Wall mount, with glasses holder
Bedside table that wall mounts with 3 screw holes. Includes and under shelf glasses holder
- Downloads
- 110
- Likes
- 22
- Rating
- 0
P
PrintablesDavis543
Bedside lamp
You need to have 2.5 metr of light strip and some smart controller. And when you will print a smooter you need to turn on vase mode and walls to 0.4mm.
- Downloads
- 109
- Likes
- 29
- Rating
- 0
P
PrintablesLjhtom (Javier Hernando)
Corner protector for bedside tables .
Corner protector for bedside tables . Simple corner protector, with two possible sides, one straight and one rounded. For 22.5 mm ikea type wood. **add model with 3cm x 3cm Make it in flexible material, as it has some cons to stay gripped…
- Downloads
- 109
- Likes
- 16
- Rating
- 5
P
PrintablesRandyNH
CPAP Bedside Shelf – Nightstand Organizer
I designed this shelf to keep my CPAP machine and alarm clock organized on my nightstand while minimizing clutter. The top shelf supports the CPAP machine, while the lower shelf provides a dedicated space for an alarm clock or other small…
- Downloads
- 102
- Likes
- 29
- Rating
- 0
P
PrintablesRokapet
Bedside holder for Apple Ipad 10.2"
Holder for Apple Ipad 10.2" (Gen 7th-8th-9th, AFAIK other models have different dimensions that migth not fit or fall out from this holder), that can be attached to the bedside, handy for putting away your Ipad when you got to sleep. Made…
- Downloads
- 101
- Likes
- 22
- Rating
- 5
P
Printablesmeub
Bedside storage and charging station for iPhone, Airpods and Wallet
This is a modified version of PjotStrog's Magsafe charger with an additional AirPods charger and wallet storage. It's specifically made to store/charge the following items: iPhone 13 AirPods (2nd-Generation) Saddleback Leather Wallet…
- Downloads
- 100
- Likes
- 33
- Rating
- 5
P
Printablesshledge
Parametric Bedside Laptop Holder
A full parametric laptop holder you can clip to the side of your bed. Load it into your favourite CAD program, adjust to taste and print away!
- Downloads
- 99
- Likes
- 13
- Rating
- 0
P
Printablesthe ripper
Bedside shelf for IKEA MALM Beds
This is the first version of a bedside shelf for IKEA MALM Beds. There a some minor design flaws, but print turned out quite well (except a problem with first layer) and fits perfectly. it is a quite stable design. if someone wants to…
- Downloads
- 97
- Likes
- 18
- Rating
- 0
P
PrintablesMulakain
Bedside Organizer
Bedside organizer for keys, wallet, airpods pro and anything else that will fit in the last section 😂 Dimensions: 165mm x 150mm x 8mm wallet section - 99mm x 83mm key section - 99mm x 52mm other section - 51mm x 75mm Print Settings:…
- Downloads
- 96
- Likes
- 11
- Rating
- 0
P
PrintablesPatrick Blom
Full size bedside table 100% vase mode
3D printed furniture is always challenging because to achieve some stability you usually have to throw a lot of material onto your machine to get a decent result. This proof of concept tries to prevent exactly that. My idea was to create…
- Downloads
- 95
- Likes
- 33
- Rating
- 0
P
PrintablesJake
Bedside cup holder
This model is part of a three part set that all join together to make a large cup holder for the side of your bed. It combines with the other 2 components with ease to complete a full functioning cub holder. You will most likely have to…
- Downloads
- 91
- Likes
- 29
- Rating
- 0
P
Printablesmainskala
1:12 Doll House Drawer Modern Minimalist Bedside
Fit & Tolerance: Every 3D printer and filament brand has slightly different tolerances and shrinkage rates. If the interlocking parts or joints feel a bit too tight, a quick touch-up with a bit of sandpaper or a hobby knife will get them…
- Downloads
- 86
- Likes
- 56
- Rating
- 5
P
Printableslual
Shade for bedside lamp (E14 Socket)
As a replacement for a broken glass lamp shade. To blind the bulb, the through slots are not radial. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: No Filament: GEEETECH PLA white…
- Downloads
- 85
- Likes
- 13
- Rating
- 5
P
PrintablesRay Fox
Bedside Remote Caddy
I got tired of losing the remote in the bed. Designed and printed and problem solved. Simple solution to age old problem! Printed on end, no support needed. I did print with a brim, but it is optional. Useful in many situations.
- Downloads
- 84
- Likes
- 17
- Rating
- 0
P
PrintablesTekoXVI
Bedside Cup Holder
I made this cup holder for my daughter who likes to have a drink by her bed at night, but would frequently spill the drink. The opening for the cup is 80 mm in diameter and 80 mm deep. The bottom opening is 33 mm wide to fit over a 1 ¼…
- Downloads
- 84
- Likes
- 16
- Rating
- 0
P
PrintablesR-ppkm
Quadlock MAG (wireless charging) dock for desk or bedside
Keep your phone safe and charged while at home at your desk or on your bedside. This easy print requireres no supports and prints in no time. The dock has a design that follows the curves of the MAG head. and he cable routes out from the…
- Downloads
- 82
- Likes
- 10
- Rating
- 5
P
PrintablesLjhtom (Javier Hernando)
Bedside lamp 2 models rabbit figure
Bedside lamp 2 models rabbit figure. Modified and added parts for coupling G9 lamp and bottom cover to cover cables. The model is prepared for 0.4 nozzle, in case of doing it with 0.6 nozzle apply an expansion of 0.2 mm . It is not…
- Downloads
- 82
- Likes
- 18
- Rating
- 0
P
PrintablesFilip Pospíšil
Bedside Phone Holder
Bedside phone holder for 3 cm bed frames -------------------------------------------------------------------- Max phone dimensions: 3.5 x 8.5 cm Inner height: 10 cm -------------------------------------------------------------------- On…
- Downloads
- 82
- Likes
- 13
- Rating
- 0
P
PrintablesAmyB
Bedside Organiser
This is an organiser I created to hold everything that clutters up my bedside table. I added the top shelf later, so it prints in three parts: the small lower section, the base and stand, and the top shelf. The small lower section can be…
- Downloads
- 82
- Likes
- 40
- Rating
- 5
P
PrintablesLvnatic
Hex Bedside Shelf
My take on a simple bedside shelf! Since I don't have a lot of room for a bedside table, I designed a small bedside shelf! I used two strips of double sided tape for mounting and it hasn't fallen off, though I added a version with m3 bolt…
- Downloads
- 82
- Likes
- 16
- Rating
- 0
P
PrintablesPrinter_O_Stuffs
Bedside Organizer/Holder for Phone, airpods, and apple watch 3rd generation
This is a organizer designed to hook onto the side of a bed. It has a hook for keys, a holder for smartphones with a hole for a charger, a holder for airpods with a hole for a charger, and a holder for an applewatch gen 3 and its charger.…
- Downloads
- 81
- Likes
- 33
- Rating
- 0
P
PrintablesCrazy4Lookin
Bedside Buddy Modular Travel Tray
If you’re on the go (or even at home), and want to make sure your jewelry, keys and other small items stay close at hand without falling off your nightstand, dresser, or bedside table, the Bedside Buddy is for you! Easily customize by…
- Downloads
- 78
- Likes
- 95
- Rating
- 4
P
PrintablesSpaceventura
Bedside Shelf
Simple bedside shelf to slide onto your bed frame. It was modeled for a 50mm tall bed rail, should be fine to scale it as needed
- Downloads
- 78
- Likes
- 17
- Rating
- 0
P
Printablesalejosma
Bedside holder
Very simple design to put things next to your bed without having to buy a bedside table. I printed it in glow in the dark ABS but it should be able to be printed in any material. The only supports needed are the ones for the hangers Only…
- Downloads
- 77
- Likes
- 17
- Rating
- 0
P
PrintablesGreenveg
Babybay bedside crib baby mobile holder
Wanted a better fit for the same bedside crib but also a completely different baby bed thing. Made the original design parametric-ish so should now be easy to make work for most things. Nut is embedded in the print by using a pause…
- Downloads
- 76
- Likes
- 12
- Rating
- 0
P
PrintablesAlmightyFireFly
Bedside Wall Lamps - Hotel Style
I designed these bedside lamps for our bedroom. they each use two gu10 light sockets and one three way pull chain switch. There are links below for parts used. The three way switch allows either upper, lower or both lights to be on. I…
- Downloads
- 75
- Likes
- 11
- Rating
- 0
P
PrintablesHeiLaut
Mini bedside storage box for smartphones and other stuff
Mini bedside storage box for your smartphone and other stuff. I added a hole on the floor to put your charging cable through, when not used you can put it in the small slid at the side to prevent it from sliding out. I included several…
- Downloads
- 72
- Likes
- 15
- Rating
- 0
P
PrintablesCabista
Handybox für die Bettseite / Mobile phone bedside clipper / holder
Ein praktischer Handy-Halter zum einklemmen am Bettrand. Auf beiden Seiten sind Öffnungen für das Ladekabel und am Boden eine Ausbuchtung für das leichte entnehmen des Telefons. Die Box ist so stabil, dass diese auch ohne den Klemmhalter…
- Downloads
- 72
- Likes
- 5
- Rating
- 0
P
PrintablesKevin Hess
Bedside Phone Holder for Lofted Beds (+ Cord Holder)
The design comes with cord-holding attachments and fits phones 7.5in x 4in. Install by sliding over the metal frame of the bed, similar to the guardrails normally provided by your University. Supports: None Weight: ~90g Layer height:…
- Downloads
- 70
- Likes
- 19
- Rating
- 0
P
Printablessmartroad
WLED Based Bedside Lamp
This is my design for a bedside lamp where I have used a WiFi WLED controller to upcycle an old lamp (I think it is an old Ikea lamp). This includes all the 3D printed parts and the circuit diagram with PCB that should be fine to produce.…
- Downloads
- 69
- Likes
- 21
- Rating
- 0
P
PrintablesMo
Tablet & Glasses Bedside Holder
0.3MM Layer Height (Or Higher Quality), 15% Infill, No-Brim (Or Raft), No Support. Commercial Parts Required : 1) M4X4X6 Brass Insert - QTY 2 2) M4X8, Hex Socket Head - QTY 2 Designed to Fit IKEA SLÄKT Bed Frame, REF :…
- Downloads
- 69
- Likes
- 23
- Rating
- 0
P
Printablesmuddymaker
Crystal LED Bedside Lamp
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker The crystal LED bedside lamp light kit can be found on Bambu…
- Downloads
- 69
- Likes
- 24
- Rating
- 5
P
PrintablesCris K B
Cute Weave Bedside Basket
A Cute bedside shelf i made for my gf, can be used as a shelf for many small things like phone, brushes, markers etc
- Downloads
- 64
- Likes
- 24
- Rating
- 0
P
Printables3DPrintBunny
Bedside in a box
Bedside in a box This is a ‘take anywhere’ bedside accessories box. It comprises of a phone stand, watch stand, comb, and pill, jewellery or bits and bobs pot. Keep your accessories organised at home or when travelling. Each component…
- Downloads
- 63
- Likes
- 31
- Rating
- 0
P
PrintablesGricey
Landscape Bedside Phone Holder
Landscape Bedside Phone Holder. Designed to allow the landscape view of the phone on the bedside Table. Without taking a huge amount of Fillament. Version 2 Includes Center Upright to allow Portrait Placement.
- Downloads
- 62
- Likes
- 4
- Rating
- 0
P
PrintablesKrismc
BabyBay bedside crib cup holder
Cup holder for BabyBay bedside crib with cutout for cups with handles. M5 bolt and nut needed for assembly - i didn't have a nut so i printed one from from G-workz3D . Printed with supports.
- Downloads
- 62
- Likes
- 10
- Rating
- 5
P
PrintablesXenon_Alpharam
Tablet bedside hanging mount/arm
This Is a model of a bedside arm attachment i made that goes with my tablet case which is uploaded in other file
- Downloads
- 62
- Likes
- 7
- Rating
- 0
P
Printablesvoxo3d
Bedside Table Tray Stand for my girl (Practical)
Dimensions: Length: 25.2cm, Width: 20cm Slot width: 2.82cm (suitable for bed rails with a width of 2.5cm) Features: Can hold items like smartphones, glasses, tissues, etc. Defects in the cover image have been removed. Structural supports…
- Downloads
- 61
- Likes
- 10
- Rating
- 0
P
PrintablesFuma720
Night Table/bedside table Organizer
I have designed two night table organizers with a lot of different spaces because I was tired of always having a messy bedside table. The first one is 250x220, and it doesn't fit into most build plates. So, I designed the second one that…
- Downloads
- 61
- Likes
- 11
- Rating
- 0
P
Printablescndewil
Bedside Phone Mount
The hanger is 28.5mm wide if it doesn't fit your bed frame you can remix the model or let me know so that i can change it for you. The print orientation is on it's side with tree supports only touching the build plate. It can be seen in…
- Downloads
- 59
- Likes
- 5
- Rating
- 0
P
PrintablesJono
TARDIS Apple Time Capsule -> Bedside Lamp!
This is a mod for https://www.thingiverse.com/thing:104028/remixes I gave away my Apple Time Capsule only two nights ago, and had no use for its home of five years. So I gussied it up, covered the windows with white paper, stuck a LIFX…
- Downloads
- 59
- Likes
- 19
- Rating
- 0
P
PrintablesGeokarm
Bedside lamp shade
I needed a shade for the bedside lamp so I opened up Fusion360 and designed one. The height of the shade comes out to 170mm at the largest the diameter is 120mm. It is designed to fit on a E14 bulb socket. I printed with wood filament 15%…
- Downloads
- 58
- Likes
- 11
- Rating
- 0
P
PrintablesTrish McCallister
Simple Bedside Book Holder
Print this model in the specs it is provided, or make it longer, depending on the types of books you want to use it for. In the provided length it works great for most hardbacks and paperbacks. This print uses approximately 63.4g of PLA…
- Downloads
- 58
- Likes
- 9
- Rating
- 0
P
PrintablesJLmike7
Wallet Pocket / Bedside Organizer
I started designing bedside pockets for all of the things I carry on a daily basis, that way everything has a specific place it should be and the top of my nightstand can be cleared off. This pocket perfectly holds the Airo Stealth Carbon…
- Downloads
- 56
- Likes
- 17
- Rating
- 5
P
PrintablesDD3D
Modular wireless charging bedside shelf
Now includes Belkin 3-in-1 charging stand option Now updated for Magsafe This is my Modular Bedside shelf. Designed to slot over an existing Ikea Lack floating shelf bracket. Pictured sanded and painted gloss grey. I've been using it as a…
- Downloads
- 56
- Likes
- 26
- Rating
- 0
P
PrintablesFunctional Design
Bedside Table with Bedframe mount.
This Bedside Table mounts itself to the side beam of Beds. The slot is Angled to Clamp to slightly differing Sizes, but around 28mm is Optimal. Adding some Anti-Slip Furniture Pads to the inside of The slot achieves a really satisfying…
- Downloads
- 55
- Likes
- 13
- Rating
- 0