253 models
R2 is a much more solid and beefier and rigid version of zaribo geared extruder body in a tradeoff 16g extra weight (if printed from ASA) still superlight but no flexing, everything else is the same, see bellow official guide…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by Pompano Brownies Big Bertha DIY Beef Jerky Gun on Thingyverse… I made my own simpler version using : 1x normal silikon gun for 50mm diameter cartridges 1x 21,5cm piece of a waterpipe 50mm x 1.8mm (both bought in a hardware…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Firt of all Check out the github repository https://github.com/Radiotbo3d/SBFI What is this? These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. Improvements?…
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
MasterChief24's model was weak at the hips, waist, wrists, shoulders, and ears. I beefed them up. Category: Model Robots
Remix of op00's Zipper Pull . I needed a couple of new zipper pulls for a laptop bag that sees daily professional use in the field. It has a really fat zipper with quite a heavy pull. The original design by op00 was great, but far too…
Beefy Fortnite Pete Riding A Surf Board.
We held a friendly office competition that we began to refer to as "Sharkvivor". After looking around for a bit and stumbling upon the Beefy Shark ( https://www.thingiverse.com/thing:229538 ) model, I knew what I had to do; scale it up,…
3 improvements towards the original OTF Fidget Knife model: Dual rail for handle & blade for better rigidity Beefier & stronger negative hook that is harder to break Rounded slider for easier to flick Oh, and i also removed the holes on…
Use this to mount AM4/AM5 cooler on your motherboard, if original bracket is missing. Version with 3mm extra beef has hook as large as it can typically fit. Can be a little challenging to install but offers maximum strength. +2mm version…
Kept breaking the legs on the original model, this one is reinforced and child-proof.
beefygrip.com Purchase a high quality ABS print (with felt lining installed!) from me, the designer to support this project. (US and International shipping!) This is comfy contoured console style grip for the Analogue Pocket handheld. It…
Print with 0 top and bottom layers, 4 perimeters. I think 25% honeycomb infill was overkill, will likely look better at ~10-15% PLA is fine, (snug) supports required This is remixed from: https://www.thingiverse.com/thing:5207720…
Here is a design for a larger sized dab tool holder. This one wont tip over so easily.
v2.0 is made to be BEEFIER - it's the "I have grandkids" edition! v1.0 has 1mm thick sidewalls on the telescopic handle, while v2.0 has 2mm thick sidewalls on the telescopic handle. I kept the same outer diameter on the final by (a)…
Ever wanted a bath-time buddy that could beat up the biggest guy in the prison yard? now you can with the beefy duck! easy print, enable supports (with approx. 20' overhang threshold) (very easy to remove) Do post your makes to the "I…
Made a beefier latch that you can get your finger under. Added holes that you can put a paracord through to make a zipper pull style handle to easily unlatch. Files available here: https://makerworld.com/en/models/623799#profileId-548041
Based on Gridfinity Modular Drawer System by Chipp Walters . I felt the original drawer was a bit flimsy, so remixed it by thickening the walls and redesigning the handle. Walls are now 2mm, and the handle attaches flush with dovetails.…
I saw this cool body cap that Codiac2600 made for their Sony Alpha camera. Sadly this camera has an E-mount and the Minolta Alpha 9 I just got uses the slightly larger A-mount. Since the model was modular I decided to take the actual…
Recommending .40mm nozzle for the lettering. The hoofs, head and tail are bart of the base. For this I had a color change for both the base and the pieces.
Added some parts with contours and extra features. 6x - M3 x 20mm CS
Remix of a Remix
These are the parts that I've managed to break (so far). In each case, I added some material in the area that broke. I haven't managed to break the beefed-up versions but with my driving... :) Attaching the Front Bearing Hubs to the Front…
Printed out of ASA material to widstand the suns heat and UV light. Printed without supports. Used a standard 5L Clear Rectangular PET Bottles With a neck diameter of 48mm. Inspired by:…
This is a replacement shade ring (nut) for standard E14 lamp sockets (M28 thread). I designed this to be a bit beefier than the original stock rings, which often crack over time. I also designed it with looser tolerances than many other…
There is slightly tighter hole for the hinge, but nothing dramatic. I've printed it in 0.2 layer height from PLA+ no supports without any issues.
Simple but strong center finder 75 and 150 mm maximum width Also cool-looking First layer may be difficult to print, so uploaded an easier version with smaller chamfers for greater bed adhesion.
I switched to BFI and BZI from Clee on my Voron V2.4 and like them a lot. I only had one issue, everything related to adjusting the Z Idlers. Getting to and adjusting the the downward facing BHCS were a hassle, especially the screw…
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
Double Helical Gear Mod on BFI (Beefy Front Idler) It has been modified based on Diyshift's BFI Gears user mode I made it to deliver better torque and prevent it from being twisted than normal gear The single-helical gear was found to…
BEEFY DIN RAIL MOUNTS These are Completely Overbuilt! They Require 1 purchased part - Link Below I made these mounts to solve the below issues from the Voron 2.4 r1. BOM STL files Will work on any 35mm Din Rail Mounted Setup These are…
Das Modell ist von Thingiverse, leider nicht bei Printables zu finden. Es passt aber perfekt an den Retroid Pocket 3+. Gedruckt habe ich meinen Griff in PLA mit einer Skalierung von 99,5% und nichts wackelt. Zur Stabilisierung habe ich es…
Use these hooks to hang up your meat for making Biltong (Beef Jerky)
Big & beefy laptop stand that has the same height as my screen. Print without top & bottom layers and honeycomb infill to get the result from the pictures. I used 18% infill and 0.6mm width
Eric Cartman from South Park - BEEFCAKE!
🐱💪 Beefy Cat - The Swole Feline You Didn’t Know You Needed Move over housecats — Beefy Cat is here to flex his way into your heart and your display shelf. This unapologetically muscular kitty is the ultimate mix of cute and comically…
I had the original handle break so I modified it to be stronger. I also made it so a bigger spring fits in it.
A re-doing of the idea by ebrown54 ( https://www.thingiverse.com/thing:2882312 ) making the cap a little bigger and more robust. Overall, a cap is a big improvement in the comfort of using the stakes, totally worth it. I use (and…
A simple remix of https://www.thingiverse.com/thing:1819779 to make the screw tabs a bit beefier. For me, they seemed to work loose over time and after repeated tightening the screws started to slip. This was simply an attempt to…
This encases the entire bottom and side of the Raspberry Pi 4 board with an opening on the bottom for easy removal of the microSD card. Utilizes two low profile DIN rail mounting brackets for a sturdier and secure installation of the Pi 4…
I kept having issues where the bottom eye would snap off due to the layer lines. Since the OG model is printed with the back of the model to the bed, the layer lines cause a weaker join between the chain eyes and the rest of the body.…
Beefed up the Mk3 nozzle for printing with PC and making supports easier Print instructions Print with a temperature resistant material such as ABS or PC
WARNING: You must glue the two pieces together. ALWAYS wait for the glue to dry fully before using the body cap as the glue could potentially permanently fog your cameras sensor. This is a nifty and beefy Sony body cap that fits on their…
One of the first things I created when I got my AnkerMake M5C was the HexScraper. I liked how thick it was, but its plastic edge did not hold up. I found the orange plastic blades and printed the Plastic Scraper Blade Hex Holder, but it…
We present the first anatomically correct Muscle Marvins with Beefy Arms! The BIG versions are at 150% scale and they print better. Use support for all models. Print instructions Category: Sculptures Print Settings Printer Brand: LulzBot…
It's a bit bigger for faster crashes. I don't like 60mph poodle missiles.
Updated to keep the front bearing secure without having to epoxy it in. I designed this motor pod to mount a 6384 motor to a soft top surfboard. The 3 phase wires run internally and I use 12awg silicone wires. I use either ASA or PETG,…
Made the shroud beefier and easier to print. The RatRig logo is now a cutout instead of a bridge.
The lever arm is longer, providing additional leverage The lever's width is wider, providing more material around the fulcrum (a weaker part of the original design) After about 1000 cuts it would break. Widened holes on lever for screw at…
Print twice and you'll need M3x10mm screws to replace the original screws on the sides of the unit.
A beefier version of idler holder for V400. What's better? Adds space between the idler pulley so there's a room for self-alignment, so the sides of the belts are not being rubbed on by side rim of the pulley Allows to use a sexton screws…
Print in something that can take heat (i printed in ASA). TPS sensor mounting to the bracket: 7mm m4 nut and bolt combination TPS bracket mounting to the throttle body: m4 bolts with very wide m4 washers.
I didn't like any of the options I could find online, so I drew up my own side rails for the TYT TH-9800. The radio is centered, and the rails extend far enough in the back to protect your antenna connection. Works great on a desk,…
Widened the opening to fit a larger light bulb/socket.
Remixed the original author's step files in Fusion adding Sony Alpha logos for multicolor printing. The original versions required printing two separate objects and gluing together, this way they are merged as a single object with…
Remixed the camera mount for a better connection. Mount taken from https://www.thingiverse.com/thing:3817940 but I am unable to list a 2nd item for the remix source. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
A remix of "The Gridfinity USB charger stand" for bigger chargers and 1x2 gridfinity squares
Beef sign Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Funny BBQ sign. I made it from PLA. Filament change at layer: 16, 21, 26. Dimensions: 195 mm x 130 mm x 6 mm. The diameter of the holes in the corners are 3 mm.
I love Matt-G's design, but the thin "hook" on the right side was a problem. As you can see in the attached pic, it failed to print at low resolution. So I opened the .step file in FreeCAD and beefed it up. Now it works GREAT! This remix…
made the legs thicker and stronger, added optional way to screw in 2 m4x40 screws in the center legs to increase strength even more! ( not needed though ) rounded of some of the corners to be in line with the other curves scaled object up…
These cable ducts have been re-created to accommodate an inverted electronics setup on a 350mm Voron. They are also thicker all around to prevent breakage which I found happened a lot with the original design. The slots have also been…
Here This is based off the latest 0.4 Beefy lulzbot Idler variant (which compared to 1.4c is basically 2.0 anyways), licensing is Creative Commons Open Source Attribution as usual. Please feel free to use this part in any manner you see…
I expected this model would already exist, but couldn't find it. I needed a funny model for Thanksgiving. I take no credit for the turkey model or the arms from Meshmixer. Category: Animals
Remix of the original cable mount, since pulling a thick shielded cable for the ACC sensor put too much strain on the original mount. Mounts from 2 planes to the 3030 extrusion. Not the cleanest remix, but it works
This model is designed to be printed laying sideways. Use supports for the CV inner race slots. Do not use 100% infill as it will be too stiff and ruin the rest of the drivetrain.
This is a shorter, beefier and larger version of smaier's nice wall hook . I have made an eye to hide the screw. You can get it here .
Bugsy doesn’t do “what’s up, doc?” anymore. Now he just grunts and swings a bat. He chews Marlboro and stares down pit bulls without blinking. He got kicked out of PetSmart for "intimidating the hamsters." We tried giving him a plush toy…
Heads-up: I kept tolerances quite low, so no guarantees that this will fit your machine. Pause at the beginning of layer 12 to insert magnets, or use the ‘no_magnets’ version with double sided tape. I inserted 20 magnets, which is a bit…
Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…
Brace Details: The braces are designed to support the corners of the concrete paver embedded into a Lack table. The screw holes on the braces are positioned strategically to ensure they thread into the structural areas of the table legs.…
So I printed this original for my son and he really wasnt that satisfied with it. His complaints were that it was uncomfortable to use because of the direction the 2 main wheels spin towards and away from each other. also he didnt like…
More of a taller and heavy duty version of the lack enclosure. Features adjustable bearing mounted barrel hinges for easy door removal along with magnetic latches, integrated filament mount, side walls are attached with magnets for easy…
This are beefy door hinges to attach a 2020 doomcube style fridge door. This is an improvement on my first design where I borrowed heavily from WhoppingPochards clicky clacky door hinges. It is designed to use the following hardware based…
Printing For stability use the following settings: PCTG or PETG for 0.8mm nozzle: 4 walls/perimeters 25% honeycomb infill for 0.4mm nozzle: 8 walls/perimeters 35% honeycomb infill In the .3mf I actually cut the model into two parts and…
Title pretty much says it. Nothing wrong with the original design I just didn't like the monster aesthetic. I also prefer to use pins and heatsets wherever possible. BOM 8x M5 Heatsets 8x M5x50mm BHCS 4x M5x18mm pins 8x M5x30mm BHCS (from…
I wanted a controller wall mount that doesn't look and feel so flimsy like most of the designs available. This is narrow enough to fit the series 1 elite controller with the paddles still attached. You can also print a cover for the…
I suggest this combo: -Screw Clamp.stl (Hex or not, your choice) -Insert1mm8.5mm.stl -Clamp Nut3.5mm.stl (Hex or not, your choice) (The original was "Insert1mm8.2mm"-"Clamp Nut1.5mm") STEP OR SOLIDWORKS FILES:…
This is a two piece desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket. This STL is released as free for non-commercial purposes. If you would like to purchase a high quality ABS print of this thing…
I lost the lamp peg from a Walmart 1.99$ solar lamp. Or was ist even 0.99$ - I don't know anymore. Anyhow. I was greatly inspired by anived's design to make the peg flat so you can print it laying down. Therefore you can also design it…
Added ribs and thickened edges for a more robust top cover
Printed body at 60% triangle pattern, carrier at 100%, .3mm layers with .6mm nozzle Hardware: 8x 30mm M5 BHCS for bodies 8x 45-50mm M5 SHCS/BHCS for carriers 4x 20mm pins 4x 9mm gt2 pulleys 8x 0.8mm-1.0mm M5 washers pullies should spin…
This might be overkill but, I made the walls of the buckle thicker by turning them into a bevel from the bottom of the buckle to the top of the wall. I have no Idea if any of those buckles ever broke this way, but I figured I'd make the…
A simple upgrade giving the Lucky 13 Armor a bit more heft.
Printed at 100mm tall, customized for the business office! Print instructions Category: Sculptures
The standard Daylight mounts dont work with Clee's Beefy Z Idlers. (BZI) so I made up a quick replacement.
I'm printing those in some weird “though” PLA, and it kept splitting when inserting the bowden cable so I made this beefier version.
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
Beefalo is a neutral mob in Don't Starve and Don't Starve Together video game
A slightly bigger and beefier wallmount for your records. Most of the others I found where a bit small and flimsy. With PrusaSlicer you can add a text or logo to the frontplate. Or leave it blank :) I uploaded the .step file so feel free…
Chee's Beefy Front Idlers , carrier part for Voron Trident, version for M5x16 screw instead of 5mm pin -- remixed to fit the slightly larger head of button head cap screws (BHCS) currently provided in LDO kits.
Pontiac Fiero Manual plate beefed up .2 layer height
The width of the part allows you to butt it right up against the wall to get the right distance It has been beefed up for 3D printing and it has a cutout to allow the spools to get very close to the wall to not waste space
Strong Groot wishing you good health! Print instructions Category: Sculptures
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's…
Just a quick remix for M3 and 20 teeth idler Print Settings Printer: FLSUN Super Racer Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: extrudr greentec pro carbon PLA carbon black Post-Printing ============= Category: 3D…
This is a simple jig used to cut the 5mm rod required for the pins mod found here: GitHub - clee/VoronBFI: Beefy Front Idlers (for Vorons) This jig will produce: -22mm (4 required)
I was having issues with the original Tanq-S mount for the 04 stock antennas being too thing and ripping. So I made a beefy version of it! Still works with the ELRS antenna mount as well as the 04 air unit mount ( which I also remixed to…
this is a remix of www.printables.com/model/1190380-inline-filament-buffer-cfs-ams-helper-beta-version to use ECAS
