Search results: bev

Sort order

540 models

P
Printablesfifindr

Beverage Can Opener

Beverage Can Opener – No more struggling with stubborn tabs or ruining your manicure! This simple but smart tool makes opening beverage cans smooth and easy. Turn off arachne mode, 3 outer walls, 20% infill, 7 bottom and top layers. ✅…

Downloads
12,000
Likes
1,584
Rating
4.95
P
Printablesfifindr

Beverage Can Opener with Cover

A smart can opener that also works as a protective cover! Use 3 walls, 5 bottom layers + 6 top layers, 0.15 mm layer, 25% infill, no supports required. ✅ Opens drink cans easily – no more broken nails or sore fingers ✅ Doubles as a cover…

Downloads
8,828
Likes
1,376
Rating
4.94
P
PrintablesAMTprojects

Vernier bevel protractor - Goniometer | Rapporteur | Winkelmesser

What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…

Downloads
3,789
Likes
1,272
Rating
4.87
P
PrintablesKimframes

Beverage can cover

Amazing top cover for your beverage cans with a 100% success rate in coverage.

Downloads
1,363
Likes
158
Rating
4.92
P
Printablesfifindr

Beverage Can + Bottle Opener

Use 4 walls, 5 bottom layers + 25% infill. A compact 3-in-1 beverage accessory that combines a can opener, protective can cover, and bottle opener. Use the can side to easily lift and open the pull tab on standard beverage cans. After…

Downloads
989
Likes
217
Rating
5

Car beverage holder adapter for 0.33 and 0.5 litre bottles and cans (Dacia Duster and many others).

EN: The cup holder adapter is designed for the Dacia Duster, but will also be used in many other vehicles. It simply slides into the 1.5 litre holder in the centre panel in front of the rear seats and, depending on which side you insert…

Downloads
155
Likes
28
Rating
0
P
PrintablesSeemomster

decision dice - beverages

Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613

Downloads
92
Likes
22
Rating
5
P
PrintablesWheelDeal

Wheelchair Beverage Holder

I created a beverage holder that can hold up to 5 cans of your choosing. The design is a very tight fit so you may want to size up for cans to slide in easier. Will fit on a wheelchair that has a 1.25" rear bar Requires two zip ties to…

Downloads
90
Likes
80
Rating
5
P
PrintablesSpadin

The Beverage Can Beach Twister

I'm happy about any improvements and feedback.

Downloads
86
Likes
50
Rating
0
P
PrintablesZiP

Recycle your old beverage can !

Français Voici un fichier 3D qui vous permettra de recycler vos anciennes canettes, de coca par exemple. Il y a en fait 2 fichiers 3D : un à mettre sur les bords que vous aurez coupé dans la canette. Il est peu gourmand en matière et vous…

Downloads
74
Likes
25
Rating
0

Flexi Rex Improved - St Patrick's Day - Beverage

Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a very large beverage. Impressively given the…

Downloads
65
Likes
22
Rating
0

New lid of beverage jug

In summer it is nice to refresh yourself with a cool drink. But on the glass jugs purchased, an iron lid was used. And it was poorly lacquered so it soon rusted. That's why I created a new lid for a beverage mug. It has a better thread…

Downloads
56
Likes
13
Rating
5
P
PrintablesJPMakesStuff

No-spill adult beverage holder

Perfect for the beach, couch, workbench, etc. This “cup holder” protects your Truly (or other tall-can beverage) from spilling and ruining your day. Don't have a 3D printer? Order already printed from:…

Downloads
36
Likes
15
Rating
5

Fast Beverage & BeerCooler

What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…

Downloads
31
Likes
33
Rating
0
P
Printablesgravity

Beverage can holder for boat 🚣🧃

Update 20.08.2022: Uploaded improved version. (Some attached pictures still show the old version) Much lower center of gravity for more stability Angled holder to make sure the beverage can is upright More generic mount plate which should…

Downloads
19
Likes
3
Rating
0

Beverageholder (Laser, CNC, 3D-Printing)

A project for my scouts, “Schwedenstuhl” to hold my beverages CNC-Milling Laser-Cutting 3D-Printing Here is a Link to the instruction to build a “Schwedenstuhl”. Modify: You can modify the height of the wood, in my case I used wood with a…

Downloads
19
Likes
7
Rating
0
P
PrintablesFalling Entropy

Beverage Flavor Note Wheel - a nice addition to your beverage station

Keep this handy flavor note wheel at your coffee corner, bar, or other beverage station…as it can serve as a reference for playing games such as “guess the flavor in this beverage". Can be used with a variety of beverage types. See my…

Downloads
12
Likes
10
Rating
0
P
Printablesmhparsons

Beverage Can Dispenser-12 oz

UPDATE 7/27/24: Made a number of changes: Added a “Full” version of the 5-can model with Covers Added covers with slot in the front to make it easier to remove the cans in the top dispenser. (Thanks to @Justnice980 for the idea!) Renamed…

Downloads
3,674
Likes
1,398
Rating
5
P
Printablesmhparsons

V2 Beverage Can Dispenser - Six 12 oz. Standard Cans

Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…

Downloads
3,567
Likes
1,817
Rating
4.94
P
PrintablesUpstateDesigns

Simple Beveled Ring

I would love to see everybody's remixes. The inside diameter is: 20mm The outside diameter is: 25mm I've uploaded the FreeCad file so its easier for you to edit the ring size. Print settings: I wouldn't recommend Prusa slicer for this…

Downloads
2,754
Likes
372
Rating
4.93
P
PrintablesMORON

Bevel Gears (semi-finished)

The model of the part is suitable and made for further modification for various projects, just like the Universal Ball Joint (https://www.printables.com/model/78847-universal-ball-joint). If needed I can export to other files or improve…

Downloads
1,621
Likes
85
Rating
5
P
PrintablesOryhara

Involute Bevel Gear generator

Bevel Gear based on the fantastic gear generator. Tooth count ends up being specified teeth /2*sqr(2), though that will change based on the bevel angle. I printed some and they mesh properly.

Downloads
1,569
Likes
56
Rating
5
P
PrintablesMrFlippant

The Transformers Can Coozies for 12oz aluminum can beverages

Self explanatory, really. Pick the sigil you like best and print it in your favorite color material. These are designed to be a slip fit with a standard 12oz aluminium can, so keep material shrinkage factors in mind. If you're not sure,…

Downloads
1,224
Likes
255
Rating
5
P
PrintablesSubtleSorcery

Beveled Lightning Bolt

I create a lot of beveled items but this lightning bolt was too cute to save just for myself! The images attached were printed on my MK3S+ with .2 mm layer height, 20% infill. Gold PLA filament from Hatchbox. I like the thicker look of…

Downloads
1,176
Likes
56
Rating
5
P
Printablesthall72

Lego Compatible (6589.dat) Technic Gear 12 Tooth Bevel

This model is compatible with the lego system.

Downloads
1,135
Likes
50
Rating
5
P
PrintablesTaffert Designs

Bevel Gear assembly

Ever need a good bevel gear? Well now you don't. Instructions 3D print. Mesh. OMG, I hope Honda doesn't use bevel gears!! #dontbeahonda

Downloads
1,089
Likes
47
Rating
0
P
PrintablesNatanel Benzaki

Mikolas' Guitar Pick collection - Beveled and Rounded

Same picks as Mikolas' but with a slight bevel or fillet all around the pick. This gives a more “on point” and deep sound and is more comfortable in my opinion. There's also a travel pick card for these picks here:…

Downloads
1,043
Likes
63
Rating
5
P
PrintablesBINGOBRICKS

LEGO compatible technic gear 20 tooth bevel, 32198

Print it with a 0.25 nozzle an layer height 0.1 mm. Update 13.7.2022: Added the STEP-File.

Downloads
1,024
Likes
49
Rating
3.5
P
Printablesmhparsons

Beverage Can Dispenser-330ml

Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…

Downloads
956
Likes
395
Rating
4.5
P
PrintablesMeideC

Bevel Gear tester with parametric gears

I needed a bevel gear system to another project, and I tried to look for existing solutions, but I could only find ones where the files were provided as STLs, making them hard to modify. So I decided to try my hands at designing my own…

Downloads
928
Likes
97
Rating
5

30°, 45°, and 60° Degree Clay Bevel Cutter Tool

A pottery clay tool designed for quick and precise cutting of clay at 30°, 45°, and 60° degree angles. Things you will need: 4x 4-40 brass heat set PEMs 4x 4-40x.25in screws An old guitar string or stainless steel braided wire both work…

Downloads
894
Likes
134
Rating
5
P
Printablesthall72

Lego Compatible (32269.dat) Technic Gear 20 Tooth Double Bevel

This model is compatible with the lego system.

Downloads
857
Likes
51
Rating
5
P
PrintablesMichał

Beverage holder for metal frame garden pool

This is a holder for cans, bottles, glasses and wine glasses to be mounter on a metal frame garden pool. I’ve designed it for a pool made of 36mm tubes. It can be used with other diameter of tubes if the hooks are adapted. The main part…

Downloads
833
Likes
177
Rating
5
P
Printablesthall72

Lego Compatible (32270.dat) Technic Gear 12 Tooth Double Bevel

This model is compatible with the lego system.

Downloads
781
Likes
50
Rating
0
P
PrintablesPL

bevel gauge / angle finder

a simple but useful bevel gauge. it consists out of three parts to print and some screws, washers and nuts. It has on each side marking lines for 45° and 90°. Print instructions I printed the two bases on a textured printsheet and the…

Downloads
656
Likes
79
Rating
4.83
P
Printablesmhparsons

V2 Beverage Can Dispenser- Six 12 oz. "Slim" Cans

Nested and keyed Beverage Can Dispenser for standard 12 oz “Slim” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…

Downloads
644
Likes
350
Rating
5
P
PrintablesPaul Mullen

Bevel Gear Box

This is a simple bevel gear box. Because no one's application for these gears are exactly the same, I've included all of the design files for both Fusion 360, and STEP. Remix to your delight. If you're looking to learn how to make your…

Downloads
596
Likes
55
Rating
0
P
PrintablesThe Next Layer

Beveled Guitar Stand

A remix of this handy guitar stand (for up to 12cm thick guitars), but with some beveled edges so that it's less jarring. I'm not great at blender, so I apologize that the bevels and edges aren't perfect. If you like my work, feel free to…

Downloads
574
Likes
36
Rating
5
P
PrintablesAlzibiff

My Customized Bevel Gear Matched Pair Generator

Customized version of https://www.thingiverse.com/thing:3682990 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3682990 Instructions Using the following options: ignore_this = 0 gear1_teeth = 12…

Downloads
556
Likes
32
Rating
5
P
PrintablesTony Virelli

Beverage Breacher - Padlock Shim Template

Please share your makes! The perfect tool for DIY security tools - the Beverage Breacher. This 3D printed template is your go-to solution for creating padlock shims from ordinary aluminum cans. Embrace the blend of traditional…

Downloads
553
Likes
43
Rating
5
P
Printablesmhparsons

Beverage Can Dispenser-12 oz. "Slim" Cans

Nested and keyed Beverage Can Dispenser for standard 12 oz “Slim” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…

Downloads
513
Likes
143
Rating
5
P
PrintablesMarcinPaska

Bevel and spur gear

Bevel gear is a type of gear that has teeth set at an angle to the axis of rotation of the gear. It is often used in mechanisms where it's important to transfer drive between two axes that are not parallel. Spur gear is a type of gear in…

Downloads
498
Likes
142
Rating
0
P
PrintablesFheder

Gear Bevel tutorial

Gear Bevel tutorial for Fusion360 files included, just use the sketch and history to learn the process of making this kind of gear

Downloads
493
Likes
38
Rating
0
P
PrintablesBAnana

Bevel gear Lego with 1 full tooth

-Bevel gear for Lego differential -Use fuzzy locking system -Use the 3.5mm for play

Downloads
468
Likes
28
Rating
5
P
PrintablesH3dSprint

Bevel gear - involute tooth system

The involute bevel gear is printed with PETG and need partially supports. Assembly instruction remove support and deburr edges if needed prepare adjusting ring (2x) by adding a hexagon nut M3 and a countersunk screw M3x12 prepare housing…

Downloads
467
Likes
49
Rating
0
P
PrintablesFirstlayer Oy

Coffee/Beverage Coaster Set

Beverage/Coffee Coaster Set – Stylish, Practical, and Heat-Resistant The Beverage Coaster Set is a sleek and functional addition to any home, office, or café. Designed to protect surfaces from heat and moisture, these coasters are…

Downloads
463
Likes
193
Rating
0
P
Printablesmhparsons

V2 Beverage Can Dispenser-Six 500ml cans

Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…

Downloads
450
Likes
391
Rating
0
P
Printablesmhparsons

Beverage Can Dispenser-500ml

Nested and keyed Beverage Can Dispenser for standard 500ml cans. There are versions that hold six (6) or five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed…

Downloads
442
Likes
57
Rating
5
P
PrintablesLyl3

Triforce Earrings with Beveled Edges

Earrings in the shape of the Triforce artifact from The Legend of Zelda. Power, Wisdom, Courage! Print one for each ear! The earrings in the photo were printed with Noulei Silk Antique Gold, and the top surface was ironed with Cura. The…

Downloads
433
Likes
164
Rating
5
P
PrintablesBooks

Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio)

A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear. The holes are designed for 8mm diameter shafts, and the free gear sits…

Downloads
418
Likes
39
Rating
5
P
Printablesmhparsons

V2 Beverage Can Dispenser - Five 12 oz. Standard Cans

Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…

Downloads
384
Likes
203
Rating
5
P
Printablesthall72

Lego Compatible (32498.dat) Technic Gear 36 Tooth Double Bevel

This model is compatible with the lego system.

Downloads
382
Likes
35
Rating
4
P
PrintablesCPA3D

Bike beverage buddy - can and cup holder

Fathers days tours are difficult. You need to ride a bicycle and at the same time have a place to store your beverage, but your hands are busy. Suffer no more, because here is the solution - the bike beverage buddy. Hands on driving but…

Downloads
382
Likes
52
Rating
0
P
PrintablesBigFootPL

Laser knife goniometer (bevel angle finder)

This model is a Laser Knife Goniometer used to find the precise angle of knife bevels. The knife is held by magnets below the edge and two additional magnets in the tilt mechanism. Tilt mechanism with a knob on the side enables adjusting…

Downloads
381
Likes
53
Rating
5
P
Printablesmedyk3D

Hanging Toothpaste Squeezer with bevel

This is a simple remix of model created by TinkrMakr I used Blender to add bevels around all the outer edges of the Squeezer.

Downloads
374
Likes
41
Rating
4.83
P
PrintablesSymmster

Beverage can Mount Stand-Up Paddle (SUP)

Description New version available. In this version, 2 cords can be fed crosswise through the can holder, which should improve stability. I designed a beverage can holder (0.5L) for a friend and printed it in PETG. I haven't tested it…

Downloads
359
Likes
39
Rating
5

Bevel Gear

I had to replace the broken bevel gear on my coffee grinder. This works perfectly Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts: No Supports: No Resolution: .15 Infill: 90 Category: Replacement Parts

Downloads
341
Likes
10
Rating
5
P
Printablesthall72

Lego Compatible (87407.dat) Technic Gear 20 Tooth Bevel with Peghole

This model is compatible with the lego system.

Downloads
321
Likes
41
Rating
5
P

6mm foam bevel cutter 45°

6mm foam bevel cutter 45°

Downloads
307
Likes
43
Rating
5
P
PrintablesBAnana

Bevel gear lego with 2 full tooth

-Bevel gear for Lego differential -Use fuzzy locking system -Use the 3.5mm for play -Use the 4mm no play (need some filing)

Downloads
294
Likes
10
Rating
0
P
PrintablesBubutech

Bevel gear Lego

Bevel gear Lego

Downloads
294
Likes
18
Rating
5
P
PrintablesLokva

MST - Bevel gear 17T

Bevel gear for rc model MST XXX-Rally. Update: I made adjustments to the first version and tried with a brushless motor. Print instructions Infill 30% with support. I printing with nylon from fiberlogy. Temperature HB 110-115°C, HE…

Downloads
290
Likes
20
Rating
0
P
PrintablesVLT

Ryobi Compact Router - 4" Sliding Bevel Guide

4" Sliding Bevel Guide for Ryobi Compact Fixed-Base Router. Works on most Ryobi Routers but the model I use is #PCL424B The guide gives you an adjustable straight edge for routing the edges of wood. No more free-handing bevels and…

Downloads
287
Likes
53
Rating
5
P
PrintablesDoomMeister

90° and 15° Fret End Dressing and Bevelling File Holders

I have provided these the 90° and 15° free so you can see how they work for you. There is a file set at 90° for filing flush to the fingerboard and one set at 15° for rounding over the edges (although that is steeper than usual). If you…

Downloads
276
Likes
59
Rating
0
P
PrintablesIbot_3D

Bevel Gear Educational Model

This is a bevel gear drive intended for demonstration and teaching purposes. As I am not personally involved in gear design and lack professional expertise in this area, the construction of this gearbox is not fully compliant with…

Downloads
268
Likes
162
Rating
0
P
PrintablesspingoogL

Bevel Gear Script

Bevel Gears are matched pairs. You cannot mix and match without changing your engagement angles. Known Issue: Tried rendering an 8T and a 120T gear, but the 120T failed. On lines 160 and 274, adjust the code: rotate_extrude($fn=N2*4)…

Downloads
268
Likes
27
Rating
0
P
PrintablesBVR 3D

45 degree bevel gear set

I used a .2mm nozzle on my printer at 20% infill. It can print really fast and I've been using it in a couple personal projects. it has really low friction and holds quite well. Do you want me to make a complete set with multiple sizes,…

Downloads
262
Likes
11
Rating
0
P
PrintablesLokva

MST - Bevel gear 36T

Bevel gear for rc model MST XXX-rally. Update: I made adjustments to the first version and tried with a brushless motor. Print instructions Infill 30% with support. I printing with nylon from fiberlogy. Temperature HB 110-115°C, HE…

Downloads
248
Likes
18
Rating
0

Fret End Bevel File (Parametric)

A variation on those that do exist, this one has a radius included to help guide the tool across the frets as you sort out your ends. Some common radii have been included in the models provided, but you can also go into the STEP file and…

Downloads
243
Likes
35
Rating
5
P
Printablesdodasch

Elektra Beckum Bevel Gear / Kegelrad

replacement part for a Elektra Beckum Table Saw PK200 UK220

Downloads
236
Likes
6
Rating
0
P
Printableskaje

Bevel Gauge - All Required Parts

This was inspired by "PL", who made a nice bevel gauge. But it got me wondering if it were possible to make one that did not require any additional metal screws. So this is not so much a remix as a complete new design. I am very happy…

Downloads
234
Likes
29
Rating
4.6
P
Printables3Diocrity

Glue Spreader Remix with Bevel

Just a simple Tinkercad remix. I wanted a bevel on the end of the glue spreader, so I added one and made the handle rounded at the same time.

Downloads
234
Likes
15
Rating
5
P
Printablesthall72
Downloads
230
Likes
32
Rating
0
P
PrintablesZiemniaczenka

Vernier bevel protractor with recessed digits

Remix of great design by AMT, allows for easier readable legends on single color print or with bad retraction.

Downloads
230
Likes
30
Rating
5
P
PrintablesJack

Micro Bevel Tool

creates a micro bevel on your blade

Downloads
227
Likes
67
Rating
5
P
PrintablesModel Magic

Beverly Hills Cop - Axel Foley - 1984

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
225
Likes
32
Rating
0
P
PrintablesModel Magic

The Beverly Hillbillys - Californey is the Place You Oughtta Be - 1962

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
221
Likes
40
Rating
0
P
PrintablesDeanCording

Bevel Gauge for 'Eclipse' Style Honing Guide

This gauge allows you to consistently set different bevel angles when honing chisels and plane irons using the 'Eclipse' style honing guide (such as Honeboy sharpening jig ). There are two gauges - one for honing plane irons and the other…

Downloads
218
Likes
21
Rating
4.5
P
Printablestomkowski

Beverage holder for metal frame garden pool - basic version

This is a remix of great Michał's project. I have removed both holders for glasses.

Downloads
217
Likes
25
Rating
5
P
Printablesmhparsons

Beverage Can Dispenser-7.5 oz. "Mini" Cans

Nested and keyed Beverage Can Dispenser for standard 7.5 oz “Mini” cans that holds 6 cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…

Downloads
206
Likes
32
Rating
5
P
Printablesklima3D

Beverage holder for Bestway steel pro pools

I love the Beverage holder, but it doesn't fit on my Bestway pool. I also love the wine holder but I don't drink wine (printed it anyway, though). I'm in no way a TinkerCad expert, but I managed to glue together both models so that the…

Downloads
206
Likes
31
Rating
5
P

Beverage Can Dispenser -- 355mL Slim Cans (Topo Chico, High Noon, Etc.)

Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…

Downloads
203
Likes
39
Rating
5
P
PrintablesDror Cohen

Beverage Can Dispenser EU 330ml (11.2oz)

Nested and keyed Beverage Can Dispenser for standard Europeans sleek/slim soda cans (330 ml / 11.2oz). Holds seven (7) cans. Model is split into two halves so it can be printed on a standard size printer (bed size ≥ 20cm). The two halves…

Downloads
203
Likes
20
Rating
0
P
Printablescookie_bucket

Universal FIFO can dispenser (Food and Beverage)

Features: Supports a whide range of cans through the adjustable top shelf and spacers. Supported cans: Ø= ~50mm min to ~103mm max / Hight= ~52mm min to ~138mm max Print settings: Wall x 3 / Layer hight=0.2mm / Infill=15% Gyroid /…

Downloads
201
Likes
75
Rating
4
P
PrintablesStavros

Depron bevel cutter

This is a tool for cutting perfect 45° bevels in 6mm Depron/foamboard. It uses a regular shaving razor, which you insert in the slot. Place the tool on the edge of the Depron, slide along and you'll get a single perfect slice of Depron…

Downloads
200
Likes
22
Rating
0
P
PrintablesCEL Design

Gordian knot with Bevelled Edges

Gordian Knot with Bevelled Edges I love the Gordian Knot puzzle by Lenbok and have been giving them out as gifts to friends. There was one common feedback that the edges were sharp and pointy which did not make it a fun experience.…

Downloads
200
Likes
45
Rating
4.71
P
PrintablesDRE

Clay Beveler

Clay beveler body. Requires 2-1.5 inch eye bolt and nut with “Beading” wire; Commonly purchased ,on the cheap, at hardware and craft stores.

Downloads
200
Likes
70
Rating
5
P
Printableswinthrop.chan

Ruixin Pro RX-008/RX-009 beveled stone holder

This replaces the plain metal plate on one end of the stone holder with a beveled holder that will hold mounted stones much more securely. The EdgePro style stones are mounted. This was tested on my RX-009. Updated January 20, 2024 Added…

Downloads
199
Likes
26
Rating
5
P
Printableswxyzab

Beverage Can Dispenser 375ml (AU)

Remix of @mhparsons Beverage Can Dispenser to fit Australia 375ml cans. Comes with a common front section and a choice of 5 or 6 can back section.

Downloads
196
Likes
87
Rating
0
P
PrintablesRon Mexico

Edge beveler sharpening tool

I also have a passion for leather crafting, and I've designed this tool to help me sharpen edge bevelers. I hope it will be beneficial for your needs as well. Enjoy!"

Downloads
195
Likes
44
Rating
0
P
Printablesgskollnau

Bonsai pot 23 hexagonal beveled 170x170x62mm

A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Downloads
191
Likes
33
Rating
0
P
PrintablesMachspace

Plain flat cog disc, unbevelled

We wanted to make some discs with our logo on, and then we wanted to make the disc more interesting. I took the “voron coin” model and the design with our logo, but it didn't print well with the bevel on our machine, so I removed the…

Downloads
186
Likes
5
Rating
0
P
PrintablesWilfred

beverage trailer

The trailer i found on thingiverse was way to big for the Peterbilt i made earlier. So i scaled it to 43%. I also did not like the tank design so a remade it. print at 100% The wheels and rims were also changed. print at 100% I made some…

Downloads
184
Likes
37
Rating
0
P
PrintablesSpike Mix

Voronoi Beverage Coaster

Size: 10 x 10 x 0.4 cm To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D

Downloads
183
Likes
65
Rating
0
P
PrintablesMakers Mashup

Pipe Coozie - Video Game Inspired Beverage Coozie (Can Size)

Warp into some fun with this video game inspired can coozie. Complete with a sturdy handle this print actually keeps your drinks cool with a thick insulating layer. Use lightning infill to have a air barrier between your drinks and the…

Downloads
181
Likes
99
Rating
4
P
PrintablesFilamentix

Outer Edge Radius and Bevel Measurement Tools (supportless)

I receommend PLA two color print. A bigger version of the radius measurement tool is available at https://www.printables.com/model/1343346-edge-radius-measurement-tool-large-supportless

Downloads
179
Likes
46
Rating
5
P
Printablesgskollnau

Bonsai pot 31 rectangular beveled 199x149x56mm

Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…

Downloads
179
Likes
38
Rating
0
P
PrintablesRadim Schuster

bevel gears

fidget toy

Downloads
174
Likes
33
Rating
4
P
Printablescali_D

Magnetic didactic model of bevel gears with explanation of forces

It is a didactic model designed to better understand the operation of bevel gears to study their forces, it has rotation functionality and magnets to hold the axes and thus study the behavior of both gears. materials: It is important to…

Downloads
174
Likes
28
Rating
0
P
Printableskrazyderek

Milwaukee dual bevel sliding compound mitre saw Model # 6955-20 shop vac & dust collector adapters

Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below. Print main…

Downloads
172
Likes
17
Rating
0