Search results: bialetti

Sort order

135 models

P
PrintablesSeamonn

Bialetti Moka Pot Tamper

Tamper for any Bialetti or other Moka to press the beans. Size of the pressing surface is adjustable in the SLT file according to the needs (x and y dimension). The original one is designed for a one-espresso moka, so pretty small.…

Downloads
112
Likes
18
Rating
5
P
PrintablesCoteletteTV

Bialetti - Moka Express - 1 Cup - Funnel

A simple funnel which fit perfecty the Bialetti "Moka Express" 1 Cup italian coffee maker. Note = I had to print it with “0.20mm STRUCTURAL” preset due to imperfections in “0.20mm SPEED” preset on MK4S. I didn't investigate further than…

Downloads
37
Likes
2
Rating
5
P
PrintablesPouOu

Bialetti Moka Pot Funnel ( 3 and 6 cup )

One fits 3 cup, while the other fits 6 cup. 6 cup have not been tested. I hava also made a tamper :-) It is only intended to collect the coffee in the funnel, not compress it. Print instructions You don't need support, but orient the…

Downloads
1,375
Likes
112
Rating
5
P
PrintablesPouOu

BIALETTI MOKA POT TAMPER ( 1 , 2 and 3 CUP + Venus )

There are 4 versions. 1-cup (48mm), 2-cup (52mm) and 3-cup (55mm). Venus (61mm). I hava also made a funnel to make it easier to not make mess (check out my other designs) :-) It is only intended to collect the coffee in the funnel, not…

Downloads
900
Likes
112
Rating
5
P
PrintablesMupf

Coffee Tamper (for Bialetti Coffee Maker)

Tamper to compress the coffee powder in a Bialetti Coffee Maker. Fits in the upper part of the Maker to store it.

Downloads
364
Likes
66
Rating
5
P
PrintablesMeister Edel

Leveler 4 Caffettiera Alessi, Bialetti, Cilio, ...

I designed this leveler to achieve consistent results. The leveler is able to distribute the ground coffee evenly in the sieve without compressing it. Simply turn the leveler clockwise. If you put in too much coffee inside the sieve, you…

Downloads
355
Likes
66
Rating
5
P
PrintablesGanti

Bialetti Coffee Funnel Holder

Funnel Holder for all Bialetti from 1 - 6 cup Print instructions Category: Kitchen & Dining Summary Funnel Holder for all Bialetti from 1 - 6 cup Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.16…

Downloads
326
Likes
60
Rating
5
P
PrintablesLord Radford

2 Cup Moka Pot Stand and Funnel for Bialetti Moka Express

I couldn't find a funnel stand combo I liked for my Bialetti 2 cup Moka Express from my quick search so I modelled one myself. The funnel has a ridge that sits perfectly on the rim of the basket. Its well enough formed that it won't…

Downloads
309
Likes
21
Rating
0
P
PrintablesKonjiorno

Bialetti funnel holder

I've redesigned original idea to have 3 legs and added knot symbol for decor ;) Category: Kitchen & Dining Based on: https://www.thingiverse.com/thing:1320577

Downloads
282
Likes
37
Rating
5
P
PrintablesPeter Farell

Play Bialetti Moca Pot

Play Bialetti Moca Pot

Downloads
248
Likes
115
Rating
0
P
PrintablesRagingRoosevelt

Funnel and Stand for Bialetti Moka Pot

General This is a funnel and stand for the Bialetti Moka Pot. Provided are STLs and OpenSCAD files. Funnel The funnel STL is for the 6 cup moka pot but if the smaller pots have smaller inside diameters, I could easily add them if someone…

Downloads
247
Likes
21
Rating
5
P
Printablesvespaholic

Bialetti Moka Coffee Stand for 3 cup Moka 13mm stem

The original didn't fit my 3 cup model so I just resized the original up about by 1/8th so that it would fit the 13mm stem of my moka pot no other changes have been made. Original by Jayuk. Print Settings Printer Brand: Creality Printer:…

Downloads
219
Likes
26
Rating
5
P
PrintablesMart80

Bialetti Coffee Holder

Thanks to the stand, the Bialetti coffee maker can dry undisturbed after washing. Bialetti stands in three sizes: 1 cups - approx. 60 ml 3 cups - approx. 130 ml 6 cups - approx. 270 ml Printed with 70% infill using PLA or PETG

Downloads
183
Likes
29
Rating
5
P
PrintablesBob

Bialetti Venus Funnel

The funnel fits the Bialetti Venus 4 Cups Version. The inner diameter is 64,20mm, so please leave a comment if it fits also other Bialettis. I printed it PETG with 20% infill and a layer height of 0,2mm.

Downloads
175
Likes
22
Rating
4.83
P
PrintablesFatlip

Bialetti Brikka 2 Cups Moka pot stand

After getting the Bialetti Brikka 2 Cup Moka pot, I noticed a few things that could make my coffee routine smoother. One issue was trying to hold the funnel steady while filling it with coffee grounds—it often ended up messy with grounds…

Downloads
158
Likes
14
Rating
4.5
P
Printablesmkosiedowski

Bialetti Venus 6 cups funnel

A remix of a funnel posted by Bob: https://www.prusaprinters.org/prints/82031-bialetti-venus-funnel rescaled in X and Y by 113,55%. Fits my Bialetti Venus moka - 6 cups version. I've printed it on my MINI+ using PLA with 0.2mm layer and…

Downloads
151
Likes
11
Rating
0
P
Printablessmiggyballs

Bialetti 1 cup moka pot dosing funnel

Print comes in the correct printing orientation, prints with no supports and should not require a brim. Works very well for my moka pot.

Downloads
150
Likes
6
Rating
5
P
PrintablesAndrew Pawelski

Bialetti manico handle

I needed a new handle for an espresso maker - the one on thingi wasnt quite right so I remixed. Handle shown in Nylon CF Fusion file included if you need to tweak some more

Downloads
146
Likes
13
Rating
5
P
PrintablesDamien Nguyen

Bialetti 3 cup moka express clip-on funnel

This funnel is made to clip onto the small coffee funnel within the Bialetti (see pictures).

Downloads
135
Likes
8
Rating
5
P
PrintablesIonNight

Tamper for Bialetti Venus 4, 6 and 10

I made the 4 cup tamper (gray) in January and the others (blue) a few weeks back. My father own the 10 cup one, so I have checked that it fits I use them pack the ground. You're not supposed to press hard

Downloads
134
Likes
12
Rating
5
P
PrintablesRonnynnoRMan

Bialetti Funnel and Distributor - Various Sizes

2 Part coffee funnel and distributor for Bialetti Mokka - NO SUPPORTS

Downloads
133
Likes
23
Rating
0
P
PrintablesJG

Funnel and Tamper for Bialetti Musa 2 Cups

Inspired by the original model, I made funnel and tamper for Bialetti Musa 2 Cup moka pot. It will probably fit other Bialetti stainless steel models (2 cup size). Note the tamper is not intended for compacting the coffee grounds. It…

Downloads
126
Likes
8
Rating
0
P
PrintablesFinn

Funnel and Stand for 1 Cup Bialetti Mokka Express

A funnel and stand for the original Bialetti Mokka Express to fill the basket with ease. Both peaces fit into the Bialetti when its not in use.

Downloads
121
Likes
16
Rating
5
P
Printableszoharsf

Bialetti Moka Express Basket Holder for Niche Zero Grinder

Wanted something to hold my Bialetti Moka basket upright while grinding coffee into it from my Niche Zero grinder. The holder has been scaled up to fit both 6 and 3 cup baskets. Print Settings Printer Brand: Creality Printer: CR-10S…

Downloads
121
Likes
5
Rating
4
P
PrintablesHarabi

Bialetti Moka Express 6 Cup tamper

Simple tamper for 6 cup Bialetti Moka Expresso. (∅ 59,8mm) I added an FFXIV DRK logo to the top for my brother, but you can download the model without it as well.

Downloads
121
Likes
8
Rating
5
P
PrintablesDodoka

Bialetti Brikka (and others) Scoup and Leveler

Edit 26.08.23: I uploaded the .f3d files. Please mind the Licence! I hated the mess it creates when filling the funnel of my Bialetti Brikka, so I made a scoup/leveler combo. It's a two piece design, which uses magnets to keep it easily…

Downloads
115
Likes
42
Rating
5
P
PrintablesPete_Radio

Bialetti Moka Express Handle (9-12 Cup)

Bialetti Moka Express 9 cup replacement handle. Use heat resistant filament. This is my first version and has not been tested, may take some fitment.

Downloads
108
Likes
6
Rating
0
P
Printablesluukey

Bialetti Venus Moka Pot Funnel - 4 Cup

Print Settings: Layer heights: 0.15mm Wall Loops: 3 Infill: 15% Attached photo of print was printed using a SV06 w/klipper, using SIDDAMENT PETG CF Green V2, which can be found here: https://siddament.com.au/products/petg-cf-green Thanks…

Downloads
107
Likes
8
Rating
0
P
PrintablesVTX

Bialetti Venus 4 Dosing Funnel

Made to work with a stand for the basket. Allows for simple filling of the basket with ground coffee.

Downloads
99
Likes
5
Rating
0
P
PrintablesBasementLAB

Moka Bialetti coffee maker Key chain - Portachiavi - Porte Clès - 钥匙链 - llavero

Moka Bialetti Key chain - Portachiavi - Porte Clès - 钥匙链 - llavero Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective owners…

Downloads
98
Likes
16
Rating
0
P
PrintablesMBart

Bialetti Venus 2 replacement handle + lid hinge (now with longer handle)

A personal project that I'm sharing now in hopes that it'll be useful for someone. This is for the older model of Bialetti Venus 2 with plastic lid hinge (newer models use metal). Note that this is a full replacement of both the handle…

Downloads
98
Likes
6
Rating
4.5
P
PrintablesAtlas Inertia

Bialetti Funnel

This funnel can be printed without supports on most modern printers. It has a 65 degree overhang that is the lip on which the moka pot rests. This funnel is designed to fit inside the moka pot for easy storage when not in use! Of course,…

Downloads
94
Likes
18
Rating
4
P
PrintablesRonnynnoRMan
Downloads
94
Likes
70
Rating
0
P
PrintablesThebigfoot

Bialetti 1 cup coffee loading funnel

Designed and printed in less than 1 hour, to help load the coffee into the small Bialetti 1Cup basket, works great! Printed in PLA Galaxy Black If anyone needs 2/3/4/5/6 cups size, just send me the exact internal diameter of the funnel…

Downloads
87
Likes
11
Rating
0
P
PrintablesAL_3D

Bialetti Moka Express Funnel

Elevate your coffee brewing routine with this funnel specifically designed for the Bialetti Moka Express 6-cup variant. This funnel ensures a mess-free coffee-making experience, fitting perfectly with a 60mm inner diameter. The funnel…

Downloads
83
Likes
18
Rating
4
P
Printablesjcg67cz

Bialetti Moka maker

just a design exercise with a realistic copy of the well known Moka coffee maker Bialetti. THe fileter is part of it, as well as the pipe moving fresh coffee on the upper part. I added a M3 bold and nut to represent the pressure valve and…

Downloads
81
Likes
14
Rating
4
P
PrintablesReinAir

Mini Moka Magic – Bialetti-Style Drawstring Bead

☕ Mini Moka Magic – Bialetti-Style Drawstring Bead ☕ For all the coffee lovers out there, here’s a tiny tribute to the legendary Bialetti Moka pot —in bead form! This charming drawstring bead captures the iconic octagonal shape of the…

Downloads
78
Likes
42
Rating
5
P
PrintablesFipsthedog

Bialetti Mokka Express Funnel 55mm

Printed in white ABS and acetone vapor smoothed to prevent coffee grounds from sticking.

Downloads
77
Likes
14
Rating
5
P
Printableshxr

Bialetti Venus 6 (old model) Cup Holder

Simple Bialetti Venus 6 cup holder. It's for the old model with the plastic thumb-rest on top. Fits the three parts at an angle so the water can run out. It has a small drainage but i suggest you dry the coffeemaker a bit before putting…

Downloads
76
Likes
16
Rating
5
P
PrintablesCoteletteTV

Bialetti - La Mokina - Funnel + Tamper

A funnel which fit perfecty the Bialetti "La Mokina" 1/2 Cup italian coffee maker. The tamper is just here to tap a little bit the coffee :)

Downloads
75
Likes
13
Rating
5
P
PrintablesTmpx64

BIALETTI MOKA DOSING POT FUNNEL - 4 Cups - 190ML - 6.4 oz - italian

This is a remix of samelovecroc 's brilliant moka pot funnel, but adapted for the 4-Cups version of the famous Bialetti Moka Pot. The one presented in the pictures is printed at 0.3Lh with a 0.4 Nozzle.

Downloads
73
Likes
6
Rating
0
P
PrintablesOpulius

bialetti moka pot funnel holder pylon

Bialetti / Moka Pot Funnel holder A little upgrade for holding a bialetti funnel in place while grinding coffee powder. Don't forget to hit the like button!!!! THX opulius See my design in action:…

Downloads
67
Likes
11
Rating
5
P
PrintablesVendelator

Bialetti Venus Funnel and Stand - 6 Cup

This can be used as a stand alone funnel to fill the Bialetti Venus 6 Cup Moka pot filter. But was designed with the Melitta Calibra coffee grinder in mind, which has an inbuilt weight scale which allows for more accurate coffee dosages.…

Downloads
64
Likes
5
Rating
0
P
PrintablesAdrian46AE

Bialetti Moka Induction 2 cups Flattener funnel

Designed from scratch but based on the idea from Klenmd (Thingiverse) to be adjusted to the Bialetti moka induction 2 pot. You can use it as a funnel and coffee flattener. The diameter of the basket where it is attached is 52mm. You might…

Downloads
63
Likes
11
Rating
5
P
PrintablesDreamBoat

Bialetti moka 6 cups tools (filter holder, funnel and tamper)

A set of tools for a 6 cups Bialetti Moka pot. You can use it to hold the filter straight while putting your ground coffee in. There's a funnel to help with that, and two tampers: one smaller than the funnel, so you can use it to push the…

Downloads
61
Likes
4
Rating
5
P
PrintablesSimon Niessalla

Bialetti Venus Funnel solid

Make great coffee without making a mess.

Downloads
59
Likes
7
Rating
0
P
PrintablesNoreva

Bialetti Mokka Express Coffee Tools - Funnel + WDT-Tool (3 cup version)

Update 02/2024: I made a WDT-Tool and cup which uses my previously designed funnel as a guide. It consists of two parts, a needle plate and the main body. You need 28 pins (25mm max. length, 3mm pin heads) to insert into the needle plate.…

Downloads
59
Likes
11
Rating
0
P
Printablesbma

Bialetti Moka induction funnel 55mm

Just another funnel for the Bialetti Moka induction. 😊 The coffee funnel is a practical accessory designed for Bialetti Moka Induction coffee makers. Key features: 55 mm Inner Diameter : This funnel is specifically crafted to fit the…

Downloads
59
Likes
7
Rating
0
P
PrintablesPunkelopment

Bialetti Moka Express 1 Cup knob

Designed for 4.2mm stainless self tapping screw, 18mm max length. Since original aluminum screw was damaged trying to unscrew

Downloads
56
Likes
5
Rating
4.5
P
Printables4DimK

Bialetti Moka funnel holder

A holder for a 3 cup Bialetti Break moka pot, to serve both as a holder and coffee loading-distribution plate. The funnel drops in place and after distributing the coffee as preferred it can pushed out from the sides (see last picture, it…

Downloads
52
Likes
9
Rating
5
P
Printablesmkosiedowski

Parametric coffee scoop - for Bialetti Venus 6tz

A scoop to fill my moka machine (Bialetti Venus 6tz) in one go with 90ml of ground coffee. The design is parametric - you can adjust the volume in the attached source file (in user parameters) I use it along with the funnel:…

Downloads
51
Likes
3
Rating
0
P
PrintablesIonNight

Bialetti Venus 4 cup/shot funnel

The funnel threads onto the water basin. This is for the 4 cup/shot Bialetti Venus for induction stove. Also check out my funnel version for the 6 cup/shot. The print settings I used: 0.2, 3 perimeters, 10% infill, concentric top/bottom…

Downloads
48
Likes
4
Rating
0
P
PrintablesGabriel Janucik

Bialetti Venus 6 cups funnel and leveler

Simple funnel that helps you to put coffee to Bialetti Venus (6 cups). It also works as leveler. Print without supports “upside down”. I suggest to set random starting point in slicer (I forgot) to avoid seam line.

Downloads
46
Likes
9
Rating
0
P
PrintablesSpringytails

Bialetti Moka Pot Funnel Funnel and Holder - 3 Cup

This morning I was making a lovely coffee and yet again had to clean up some spilled coffee grounds! "Never again!", I thought to myself and so this model came to fruition. I designed this but was definitely inspired by the shape of this…

Downloads
44
Likes
3
Rating
0
P
PrintablesDamien Nguyen

Bialetti 3 cup moka express screw-on funnel

A funnel that fits a 3 cup Bialetti moka pot. To help when dosing or during your "puck" preperations.

Downloads
43
Likes
5
Rating
0
P
PrintablesTobias0530

Replacement handle for Bialetti New Venus 6-cup moka pot

I wanted to have a more compact handle for the current Bialetti Venus (6-cup) because I use it on the road. The more compact shape means, that the handle is closer to the (hot) steel pot - so be careful and don't hurt yourself. An even…

Downloads
38
Likes
3
Rating
0
P
PrintablesHobbydrucker

Bialetti complete set

Komplettes Set für Bialetti Espresso Maschine. Enthält einen Einfülltrichter mit Schieber für den Siebträger, einen Stampfer/Andrücker, einen Fuß für das Sieb und einen Fuß, um die Hände beim aufschrauben vor der noch heißen Maschine zu…

Downloads
37
Likes
11
Rating
0
P
Printablesbma

Bialetti Moka induction tamper 54mm

Just another tamper for the Bialetti Moka induction. 😊 Use this tamper to slightly compress ground coffee before brewing. Technical Specifications: Inner Diameter : 54 mm Material : PLA (or any other suitable filament) See my matching…

Downloads
37
Likes
4
Rating
0
P
PrintablesLance Erickson

Moka Pot Knock Cup (Bialetti 3 cup)

Taking inspiration from espresso knock boxes, I designed this simple tool to help with extracting the coffee puck from a Moka Pot filter basket. It is an, admittedly, particular use case, but I didn't want to tap the basket on the garbage…

Downloads
37
Likes
7
Rating
0
P
Printablespawcz

Tamper for Moka Bialetti Kitty Nera

I made a Tamper for Moka Bialetti Kitty Nera for 2 (43mm) and 4 (53mm) cups. Easy print from PLA..

Downloads
36
Likes
6
Rating
0
P
PrintablesÖzenç Bilgili

Bialetti Moka Pot Stand + Leveler

A stand with spillage channels + a leveler that sits on the basket for Bialetti moka pot baskets with 44.5 outer diameter. It still needs some minor adjustments with tolerances and overall design but it is usable as it is. The source file…

Downloads
36
Likes
5
Rating
0
P
PrintablesEvilGod

Bialetti Venus 2 replacement handle Remix

I successfully printed and used the replacement part in PLA but the handle is to short for my liking. So I cut up the model in 3d Builder and increased the length of the handle. I will now print it in PETG because it will be closer to the…

Downloads
36
Likes
6
Rating
5
P
Printableslija31415

Bialetti drying and storage rack

This drying and storage rack was designed for the Bialetti moka express 3 (left) and 6 cups (right). The total height of the rack was set by the 6 cups Bialetti. You might be able to make it suitable for other sizes by up- or downscaling…

Downloads
35
Likes
9
Rating
0
P
PrintablesJurloo

Bialetti knob top cover

Bialetti knob for top cover Category: Kitchen & Dining

Downloads
34
Likes
4
Rating
0
P
PrintablesDrnvsco

Moka Tamper Bialetti Style

A nice tamper for your Italian moka pot, matching the iconic Bialetti style. Remember not to press your coffee too hard.

Downloads
33
Likes
5
Rating
0
P
Printableszzazzulin

Bialetti Moka Pot Tool Set (3 & 6 Cup)

Hello coffee lovers! If you’re tired of coffee grounds spilling all over your favorite moka pot, I’ve got a simple solution for you — a funnel! You can also tamp your coffee (honestly, I’m not even sure why I do this, and I’m pretty sure…

Downloads
33
Likes
3
Rating
0

Tamper for classic Bialetti Moka Pots

With a perfectly matching diameter, it ensures even compression of the coffee grounds - delivering fuller flavor, better extraction, and that authentic café-style moka at home.

Downloads
32
Likes
5
Rating
0
P
Printablesbangbang

Bialetti 2cup funnel

the short one could put in the moka pot. get what you need.

Downloads
32
Likes
4
Rating
0
P
Printablesr0nflex

Bialetti Moka Express 9 cups funnel stand (Jayuk's "Bialetti Moka Coffee Stand" Remix)

Came across Jayuk's moka pot funnel stand in this James Hoffmann's video : https://youtu.be/X3bEjJ_S2V0 Unfortunately this design doesn't suit my big old 9 cups (420mL) Bialetti Moka Express funnel, nor the couple remixes out there. So…

Downloads
30
Likes
4
Rating
0
P
PrintablesCAKCAD

Moka Pot Funnel Stand, Fitting Bialetti 6T

THE PROBLEM Moka pot funnels are cumbersome. DESIGN BRIEF Hold the the funnel of a 6T Bialetti moka pot. Hold the funnel without tilting. Have a wide enough base to let the funnel sit over the moka pot boiler. Allow water to pour through…

Downloads
29
Likes
2
Rating
0
P
Printablesmartijnstr

9 Cup Bialetti Drying Stand

Drying stand for the 9 cup bialetti. Printed out of petg using 4 walls.

Downloads
28
Likes
5
Rating
0
P
PrintablesNetweaver

Bialetti Espresso capsule holder (inside door)

Changelog: Update 20230307: I've added a version for a 300mm2 buildplate as well, either for the smaller printer or for the smaller cabinet. ---------------------------------------------------------- I designed all from scratch, taking…

Downloads
28
Likes
6
Rating
0
P
PrintablesKladrie

An itty-bitty Bialetti

You know you want one - a highly detailed miniature moka pot, for fiddling and general amusement. With removable filters and funnel, central thread, and even a working lid, just like its metallic bigger brethren. Good for one, or even two…

Downloads
27
Likes
19
Rating
0
P
PrintablesMar Ber

Funnel for Bialetti Venus 2 cups | Trichter für Bialetti Venus 2 Tassen

english 2 versions: with or without outer attachment ring Recommended filament: PETG (on behalf of my cousin's son) deutsch 2 Versionen: mit oder ohne äußerem Aufsatzring empfohlenes Filament: PETG (im Auftrag des Sohnes meines Cousins)

Downloads
27
Likes
2
Rating
0
P
PrintablesIonNight

Bialetti Venus 6 cup/shot funnel

The funnel threads onto the water basin. This is for the 6 cup/shot Bialetti Venus. They are tested on both the Induction- and the Camp fire versions. Also check out my funnel version for the 4 cup/shot The print settings I used: 0.2, 3…

Downloads
27
Likes
2
Rating
0
P
PrintablesMephistotsihpeM

Bialetti Funnel

Funnel to make filling coffee into the filter easier and reduce spillage. Can be rotated to level the coffee grounds. Designed for the 3 cup Bialetti, with 65 mm of outer thread diameter and 55 mm of inner filter diameter. Might also fit…

Downloads
26
Likes
7
Rating
0
P
PrintablesVojtaCe

Bialetti Moka Pot Express 2 Coffee Basket Holder

A moka pot style coffee basket holder for the Bialetti Moka Express - 2 cup version. -Can be sized up/down to fit your basket size -Themed in the shape of the moka pot to blend in -Helps you hold the basked while putting your coffee in…

Downloads
23
Likes
5
Rating
5
P
PrintablesErik

Bialetti Moka pot filter basket adapter for Wilfa Grinder

A mocka pot filter basket adapter for Wilfa Uniform grinder. Everybody knows that coffee goes everywhere, especially when trying to put it in a filter basket. This adapter allows you to fit the filter basket in the Wilfa Uniform grinder…

Downloads
20
Likes
2
Rating
0
P
PrintablesJan .J

Bialetti Drying Rack

Drying rack for Bialetti Venus 3-cup. I believe I have an older version of the Venus moka pot, so I’m not sure if the newer 3-cup models fit—but I think they should.

Downloads
20
Likes
5
Rating
0
P
PrintablesJonas Andre

The Mini Moka Apprentice - a Bialetti and Fischer Price styled mokka pot

Mini Moka Apprentice – Training Tomorrow’s Barista Today! why struggle and work for great coffee? With the Mini Moka Apprentice, kids can start their journey to becoming your very own personal coffee-maker machine years before they can…

Downloads
20
Likes
11
Rating
0
P
Printables3dkwahl

Kaffeepresse für Bialetti Mokkaexpress

PETG Layer: ≤ 0.20 mm Wall: ≤ 0.8 mm Bottom: ≥ 1 mm

Downloads
20
Likes
2
Rating
0
P
PrintablesJonacito

Bialetti Milkfrother Tuttocrema Handle

This is a replacement part I made in blender for the handle of the bialetti milk frother "Tuttocrema". First model btw. Is it a 1 to 1 copy of the original? - No Is it a piece of ingenious design - Meh Does it fit and work - Yes 10%…

Downloads
20
Likes
5
Rating
0
P
PrintablesBlueberry

Vase Mode Coffe Tamper 72mm for Bialetti Venus

I printed mine in PETG, with 0,7mm extrusion width (0.4mm nozzle), 0,25mm layer heighth and 3 BOT layers using vase mode. The result needs only a bit filament, is light but sturdy enough and has an opening which fits common coffe spoons.

Downloads
20
Likes
0
Rating
0
P
PrintablesBent Derailleur

Bialetti Venus (4 cup) - Filter Funnel Holder

For better precision and more style in your brewing. Use this funnel holder while preparing your coffe. Designed as a roman column. Use stand-alone or together with the funnel cone. If you like my work, consider buying me a coffee:…

Downloads
19
Likes
4
Rating
0
P
PrintablesPs

Bialetti Funnel

Please use at least Food Safe Filament and be aware that the chance to have plastics in your coffe is not 0. Other than that, the funnel makes it very easy to pour your coffee in the Bialetti from larger containers

Downloads
18
Likes
5
Rating
0
P
PrintablesSipper

Bialetti Moka 4 cup Funnel

Funnel for the 4-cup Bialetti Moka coffee maker may need support

Downloads
18
Likes
3
Rating
0
P
Printablesblue_radio

Basket Stand for 6-Cup Bialetti Moka Pot

Stand for holding the basket of the 6-cup Bialetti Moka Express espresso maker when filling with ground coffee. Designed to print without any supports. There are two versions of the model - the first one, shown in the photo, matches the…

Downloads
18
Likes
2
Rating
0
P
PrintablesIonNight

Bialetti Venus 10 cup threaded funnel

Print upside down. I used 0.16 layer height

Downloads
18
Likes
1
Rating
0
P
Printablesgpfl

Bialetti - Funnel & Tamper

A simple funnel and tamper to help load coffee grounds in your small stovetop Bialetti coffee maker. Size This is a small size, with the cup diameter of 42mm Printing Instructions Printed on PLA, 0.2mm layer height

Downloads
16
Likes
2
Rating
0
P
Printablesjamalam

Bialetti Moka Express 3 Cup Screw On Funnel

This funnel threads onto the boiler portion of a Bialetti Moka Express (3 cup model only) to direct coffee grounds into the basket. Printed on my CR-10 with the threaded portion touching the bed. I disabled supports on the threads…

Downloads
16
Likes
2
Rating
0
P
PrintablesBent Derailleur

Bialetti Venus (4 cup) - Filter Funnel Cone

Prepare your moka easier with a cone. Use stand-alone or in conjunction with the funnel holder --~~¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤~~-- I made a larger funnel as well, it is better to use but takes more space (and does not fit the stand really), but…

Downloads
16
Likes
2
Rating
0
P
PrintablesMiso89

Bialetti Musa 4 cups tool

A tool to make it easier to close the Bialetti Musa Moka pot (4 cups) to the correct tightness. I noticed that mine would sputter a bit when it wasn't closed tight enough. Because of it's slick and round design, I used the valve as a grip…

Downloads
16
Likes
1
Rating
0

54 mm tamper for Bialetti Mokka/Espresso machine

Just a simple press with decorations. printed at 0.16 mm layer hieght 20% infill 3 walls 5 bottom layers

Downloads
16
Likes
2
Rating
0
P
Printablesbma

Bialetti Moka induction tamper - thin

Just another tamper for the Bialetti Moka induction. 😊 Thin version of https://www.printables.com/model/795330 Technical Specifications: Inner Diameter : 54 mm Material : PLA (or any other suitable filament) See my matching funnel:…

Downloads
15
Likes
2
Rating
0
P
PrintablesLelle

Arm Boom Replacement for Coffee Machine Bialetti Mokona

I quickly designed this to replace a broken arm boom. ⚠ Required Hardware: You will need the original filter, handle, and cap. Additionally, you will need an M5x40 mm screw - a longer screw is necessary to ensure the 3D printed joint is…

Downloads
15
Likes
1
Rating
0
P
PrintablesPistonPin

Funnel extension and stand for a two cup Bialetti Moka Express

A stand and funnel extension for a two cup Bialetti Moka Express – makes filling the funnel a bit easier.

Downloads
14
Likes
0
Rating
0
P
Printablesspoz

Coffee funnel for Bialetti Moka Induction pot (2 Cup variant)

Slip fit over the coffee pot to reduce spillage when filling. Fits inside the pot when not in use. Freecad model is also included in case you wish to resize it to fit your own pot.

Downloads
14
Likes
0
Rating
0
P
PrintablesRadek B.

Bialetti tamper (10 cup)

Simple print. The size is adjusted so that the tamper fits into the closed pot. No need to store it anywhere else. PLA 0.2mm. Smooth sheet recommended

Downloads
14
Likes
0
Rating
0
P
PrintablesRadioteddy

Bialetti dosing funnel

A dosing funnel and a tamper-like lid helping to evenly distribute coffee in Bialetti moka pot. I designed it for Bialetti Venus 4 cup, but it should work just fine for any other 4 cup pots. I made two versions of the design: one has a…

Downloads
13
Likes
1
Rating
0
P
PrintablesAdrian46AE

Bialetti Moka Induction 2 cups basket holder

Basket support / holder for the Bialetti Moka Induction 2 cups. No more tipping of the basket while loading it. I have added three foam strips to prevent the basket from spinning while I rotate the flattener funnel which you can also…

Downloads
13
Likes
4
Rating
0