16,598 models
Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Counter Bin - Improved Design for Effortless Kitchen Clean-Up Model Overview: Introducing the Counter Bin , a refined and enhanced version of existing kitchen counter cleaning solutions. This model combines the best features of two…
The name of this carabiner reflects the important message that no one should trust their life with it! That is to say, it is NOT FOR CLIMBING. With this disclaimer out of the way; my goal was to try and make that best climbing-inspired…
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm.
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Info: v3 remastered version of my previous carabiner model (created after a while of using it) - (it still uses great locking idea from this model - thanks!) so this carabiner has the same locking hook , which does not allow carabin to be…
Utility Carabiner: Secure and Versatile Clip for Everyday Use Product Description: The utility carabiner is a versatile and reliable accessory designed for everyday use. Featuring a pre-tensioned mechanism, it stays securely closed…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Easy to print yet very well working pinwheel, looking more like wind turbine. It uses common bearings easy to find in DIY stores or in sport equipment stores (they are used in roller skates). All parts fit into 18x18x18cm volume printer,…
With nozzle 0.4 mm you can set external perimeters to 1.2 mm and layer height up to 0.3 mm. With nozzle 0.6 mm you can set external perimeters to 1.7 mm and layer height up to 0.44 mm. Lid can be found here:…
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
This is a basic redesign of a lock that I saw a couple of years ago. It is fully functioning and works like a real lock. To add, when you open the lock the combination is automatically mixed up and doesn't show the correct code. It can…
Small trash bin to install in any door of any car. Before you start choose the correct size for your car You need to measure the space available on your car door to install the trash bin and choose the size that best suits you. Isn't the…
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 There is a more recent version that works better this easy to print wind turbine looks great on any fence post or wall, with the easy to…
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Small 12x12x12cm trash bin to office. The printable logo is at this link: https://www.printables.com/cs/model/423981 I printed it from PET-G, the logo from PLA, and glued it according to the template with instant glue.
his is my model spiral Francis turbine. Turbine has 8 blades. More info about turbine runner is in file: "Turbine runner.txt". Turbine runner modely by Esmir Hozanovic. If here somethik problem, download model here:…
Basics about this design: The design of this elegant octagon bin was actually done in a few minutes. Only after I had printed it from PETG, I realized that when printed in vase mode, the slight shrinking of PETG gives it an additional…
Gridfinity - Metric Screw Labeled Bins (M2.5, M3, M4, M5...plus you can mod for others) Bins used for storing small metric screws (M2.5,M3,M4 and M5). If you need other sizes you can simply use prusa slicer to change embossed text based…
Two color design The base has interlocking cut outs for the rings, which are supposed to be printed in another color. If you only have one color, or you just want to print it as one piece, please use the one color model. One color design…
I found nothing to my liking online - blender'd my own
Screws labels with pictures of DIN912 screws
Here is my design of a tiny basketball basket - your tiny playground in your office! I've provided a bin mount and a table stand for it. All the color changes are layer based so you won't need a MMU for it, there are also no supports…
This jig is strongly inspired by the jig of the well known blue colored jig brand. Although they have the same properties, they are not compatible. This jig has built-in measuring scales and a adjustable edge guide for easy positioning.…
Thanks for choosing this model! It is: Quite sturdy Designed to print using vase mode. A fast print (prints in under 2 ½ hours on a MK4). Remixable (with .step and .f3d files attached) Able to be used commercially / sold (see licence) I…
Screw lock carabiner Typical climbing carabiner to customize with your favorite colors. Model with screw lock Note: Do not use for climbing The model has been projected with catia V5 Assembly: A little force must be exerted to mount the…
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
A small geometric trash bin I designed for placing near my printers and near my workbench where I cleanup parts. There's a few fun features about this bin that make it unique and helpful for 3D print waste: -A brim around the top of the…
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
I designed a small trash bin which fits in a cup holder. This bin is good for small bits of paper and plastic wrapping. Works great for my kids, no more trash on the floor! The lid on this bin spins in place making it easy to add trash,…
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…
I wanted to make alternate designs for the Catan pieces so this was a first draft at a settlement replacement. Can use a .25 nozzle to retain window and door details at the current scale. Cover photo was printed with a .40 nozzle @ .15mm,…
A set of the most common bookbinding spacers used for off-set cutting of bookcloth and book board when binding or re-covering hardback books. Dimensions: height 5mm, length 254mm, widths are 20mm, 10mm, 7mm, 5mm, & 3mm. Spacers have…
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Hey there :) This Carabiner is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without requiring supports when printed. It is perfect for keychanes or to…
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Layerheight 0.2 The original is 50x50x100 mm and printed on a Mini. I have included two different lids. One with a trashbin-symbol and one without. I have also included a version which is 150% compared to the original. I have also printed…
I really liked the Windmill - 100% Printable and I also really liked the design of the Windmill Wind Turbine rotor So, I couldn't resist merging these two beautiful designs together Features Reuses original parts from both wind mills…
Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…
use ❗PETG❗ or some flexible material (do not use PLA) Info: carabiner modification of my previous model this variation is more stiff (harder to open, harder to insert key ring through the gap) Dimensions: its height is 7,5 cm (bigger by…
I used PLA material with a granite motif for printing. I adjusted horse back where the mane ends. I also added a tail from another project. He removed the horse fur and added his own version. The original model had a lot of problems with…
I got the new Amazon Echo Show 5 for my RV/motorhome and as space is limited I wanted it off the counter and under the cabinet in the bedroom. I designed a mount that has a mesh back using PrusaSlicer's modifier mesh (.amf attached has…
Do you find yourself with a problem? Not a big problem, but quite specific and it's bothering you? Then you arrived at the right place! Sometimes when printing a lot with the Prusa MK3/MK3S/MK3S+ and starting new prints without cleaning…
Hey there :) This Carabiner is the large version , there is a small and medium as well. It is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without…
I created these simple dividers to separate sections of 3-ring binders. They've worked for me for a few years as both dividers and as place-markers. Printing instructions Nothing special - just slice it and print it. I used solid 100%…
Klicks easy on my IKEA Lack printer housing to keep filament parts, paper and any other waste. Pull away and plug in in seconds as often you need it. Believe me: after a full year of usage you would never be without it. All these little…
This is the old version - see my latest, upgraded Version 2 . Hangable filament waste bin inspired by some IKEA wall organizer boxes that I saw once, but couldn't find one later. The bin can be easily removed when you need to empty it,…
I refactored this bin with 1mm wall and better inner fillets to avoid infill for faster printing (2h with IS structural for perfect quality, 1h with speed profile) and require less filament (46g vs 83g for the original model) You must add…
Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…
I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
This was my idea for the cabinet knobs contest. I'm really happy with how it turned out and plan on using it in my office/workspace. It's 28mm at the widest and about 18mm tall. I designed it for a smaller drawer but ended up printing it…
THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 The latest version of my wind turbine. After taking feedback from some others who made the V3 I have improved this design in a few major…
Normally when using a sewing machine, a person has a thread spool and a bobbin (the little spool) loaded with the same kind of thread. They are separate things, but it makes sense to store them together since they are matched. This object…
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…
I found the knobs on my wardrobe and drawers a little uncomfortable - if your hands are wet, you would struggle to keep hold on them, they would also be difficult for people with disabilities such as arthritis. So I designed some basic,…
Hello, here I have a functional wind turbine for you. There are 2 mounting options: *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will…
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
This Customizable Cabinet Knob allows you to change the round label without having to change the button. When changing the contents of drawers or cupboards, you will only need to change the round label. The knob is screwed in with an…
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Carabiner mug with various images Nice little 300 ml mug that you can attach to the outside of your backpack with the carabiner. Note: Only use food-safe plastics Clean and disinfect thoroughly before use Model printed with: Prusament…
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Isaac. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Verwendete Nozzle N0.4 Schichthöhe 0.2mm Material PLA Infill 20% Ich druckte dieses Modell mit Stützstruckturen für die Skistockkuhle. Bei der Montage schmolz ich die Säulen auf die Halterung und füllte die Kuhle mit Heißkleber um mehr…
Mal ein Kleiner Test. Muss noch auf Druckbarkeit getestet werden!!!
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of double ribs (depending on the size of the ball): 6, 10 and 14. Rib width 3 mm. Print the bottom part with a support so that the…
To install the cover on the bin, first put the bigger tab into the hole, then push the smaller one in and it should go easily. Then just superglue the handle onto the cover.
Sometimes when our trash bin got emptied, it fell aside and the peg which holds the lid breaks. This is a quick replacement part for a SULO trash bin with 120l or 240l volume, very common in germany. It's shorter than the original one but…
This is a model of the Hazbin Hotel as it appeared in Season One of Hazbin Hotel. (I've also made a model of the Season 2 Hotel (link) .) Dimensions Height Width Length regular 242mm 196mm 99mm small 121mm 98mm 49mm The model is split in…
My wife asked me to make a replacement for her floss bobbins. There does not seem to be any source for the original DMC bobbin. I re-created it by eyeball in Fusion 360. It is a quick, easy print in any material.
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
My personnal proposition for organize all kind of stuff: Drawer with modulare compartment (1 or 2). Anti slip system (drawer won't fall if you move the shelf). Integrated label shape (for paper label or 3d printed label) Stackable shelf.…
An embroidery floss bobbin that's more durable than the paper ones available. This model can also be scaled up 200% to hold jewelry chain. Included scaled up gcode file for jewelry chain holder.
A set of parts bins for the Milwaukee PACKOUT 3-Drawer Tool Box (48-22-8443). Based on @pmirf_140495's design, but these should fit the newer tool boxes with the added reenforcing ribs. I also added a set of bins which can be inserted for…
Hola :) Para armarlo solo necesitarás un cautín o taladro para hacer los agujeros e introducir la pieza que funcionará como bisagra, estos entraran perfectamente, te recomiendo que le pongas una gotita de kolaloka para unir la bisagra y…
Hey there :) This Carabiner is the medium version , there is a small and large as well. It is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without…
You can stack up multiple modules on top of the ground anchor and optionally add moss inside the modules for plants which need the moisture. I recommend to print in PETG. The module should be printed with the detents up or with brim…
Disney Robin Hood: Robin Hood / Hiss / Alan-a-Dale
When cruising an IKEA for inspiration with a friend last month it was brought to my attention that the KALLAX cubes that everyone knows, loves, and has lacks a truly efficient double drawer option. Yes, they do sell drawers for them but…
This is a remix of the Designer Towel Hook that fits a 16mm thick kitchen cabinet door
Pin and Hook door catch/latch
This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets. There are two versions available: Holes for magnets are 3.0mm deep Holes for magnets are 3.2mm deep They exist because the first layer squish…
This is a Harry Potter themed strongbox with a programmable 8-digit combination lock. The lid is held firmly shut by the powerful locking charm Colloportus to ensure that only one properly schooled in the art of witchcraft and wizardry…
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
I had no idea you can go into PrusaSlicer, right click the item, mirror along X-Axis, and a right side bin becomes a left side bin. So before I learned this I added a second hook to a single hook left side bin
This 3D printable Vertical Axis Wind Turbine (VAWT) model is designed to be both educational and functional. This model replicates the design of a real VAWT. The turbine features a central axis with curved blades that catch the wind from…
Update 1 - 08/30/2022 I have modified the discs a bit so that a little tolerance is allowed when entering the combination. Update 2 - 11/05/2022 I added the missing disc_2.stl If you like this model, feel free to check out my others here .
![[REMIX] Drippy Flip-Top Bin](https://media.printables.com/media/prints/609966/images/4848897_0fda6b34-abb8-4201-af3b-21725af2ffd1_398a9720-442d-4da9-bd5c-9711d1ce655e/img-0.jpg)
![New Angled Coupler for PTFE Tubing [PC4-M10]](https://media.printables.com/media/prints/37394/images/369595_474b669c-2177-4d92-bb73-0382863ed5f2/img_3225.jpg)
