198 models
Schlüsselanhänger mit Blitz. Gedruckt mit Bambu Lab X1C aus PLA. Keychain with lightning bolt Print with Bambu Lab X1C made of PLA.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
UPDATE: Ignition is confirmed to be the same height as Under Needle and a NEW VERSION is made under this new information. V3 Is now at the accurate height of 27.6mm Now it has been confirmed that Bahamut Blitz's bit is called 'Ignition'…
Easy to build model of the German WWII truck Opel Blitz. Model printed entirely in PLA, in 0.10 for the smaller parts and 0.20 for the chassis and cabin. Steering front wheels using the drive shaft as a control. Scale model with mobile…
Description Introducing Blitz : a solenoid-powered, talon-fed, micro-flywheel pistol capable of any FPS between ~80 and ~170. Compatible wheels: Traceur wheels: https://roboman.net/products/traceur-micro-flywheels-25mm-spacing-1-pair…
UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins…
Bicycle valve caps are notoriously dull. Not this one. Guaranteed to bring a smile to faces when printed in bright color. For the sharpest pixel effect print using 0.25mm nozzle. However the standard 0.40mm nozzle is fine too. Should fit…
Replacement Rubbermaid / Gott gas can "nut" screw cap for a 1.5 gallon "Gott" (Rubbermaid) plastic gas can. Non-standard / custom threads made this a fun* challenge. Perseverance and a couple more Youtube lessons in how to use Fusion 360…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This Blitzball is mainly used for pitching as it can survive impacts to the ground, but be careful when using it for batting as the ball could explode if hit hard enough (Personal Experience). The ball moves in the air like a regular…
A Drip Tip for Geekvape Blitzen. Printed mine in 0.08 Category: Other
This is the 5th generation of my attempt to make a TPU Blitzball. It works very well. Print in TPU with supports. Glue together with any superglue. Make sure that the two pieces line up to where each hexagon is in line with all others.
Blitzcrank from Leage of Legends
Blitz Clipart / Lightning clip art
LEGO Blitz field kitchen
A dovetail box to hold a set of Dutch Blitz cards. Design notes: Loosely based on: Sliding Dovetail Lid for 3D Printed Box These fit a set of knock-off cards I bought on AliExpress that measure 88 mm (L) × 57 mm (W) × 25 mm (H). So you…
Print Settings I used to make it as close to the real weight as possible: Setting Value Infill Gyroid Infill % 10% Walls 2 walls Top Layers 3 Bottom Layers 3 Layer Height 0.20 mm Top/Bottom Pattern Concentric Nozzle 0.4 mm Material PLA
Two sets of wheels for the Tamiya Blitzer Beetle, but should also fit Stadium Blitzer and Stadium Thunder and mostly likely other 2WD Tamiya models which have ball-bearing front wheels rather than the 12mm hex found on most aftermarket…
Steering servo arm for Tamiya Blitzer Beetle / Stadium Thunder. Most likely works with other Tamiya models with same type steering linkage. Note that this is only a part of the servo saver assembly and is not threaded to fit directly onto…
Blitz Gas Can MODEL#50805 Replacement Cap The model is designed to be printed with TPU filament No supports needed 0.1-0.15 Layer height recommended Print upwards with “GAS” side touching the build plate Easy and straightforward print,…
Overview Yet another chess set. These pieces more-or-less follow the official size regs for tournament chess pieces. The look of this set is heavily inspired by the BCE ("best chessmen ever") blitz set, though I've made some modifications…
Dutch Blitz case for up to 12 decks. *Note that the model with all the parts included in one file does not have the embedded text if you do not want it, or want to place it elsewhere.
Mount for IFLIGHT FPV BLITZ M10
BLITZ - DOORS Print this suuuper easy miniature of Blitz, an entity character from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. This is flat and has different heights to allow you to pause and change filament color in…
Dust cover for the Blitzwolf BW-V5 Projector lens I printed this at 0.2mm resolution with a 0.6mm nozzle and it fits nicely and shouldn't fall out easily.
Blitzcrank es un autómata enorme, casi indestructible, creado originalmente para el tratamiento de residuos tóxicos. Sin embargo, este propósito original le parecía demasiado restrictivo, así que se automodificó para servir mejor a los…
Always yearned for a more sturdy ice scraper and breaker? To really push with force against that freak ice? Kratzblitz is here to fill that gap. Features - Fist operated for maximum application of force - Two-handed use for more force or…
Shield of Blitz from game Rainbow six siege.
Wasnt intending to use the chrome mirror on the sprue anyways i figured id cheap out and not buy it at all. I did however want to use the "glass" part of the headlights so i designed printable fixtures. They sandwich the "glass" headlight…
This model encloses the electronics on the Tamiya Blitzer chassis to keep the dirt, dust, grass and leaves out and secures with a standard body retainer clip. Designed around a Blitzer Beetle, should fit other Blitzer chassis models. (Let…
Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…
This is a basic front end barrel ring and front cover to replace the area where the white pump blaster used to be on the Motoblitz. It reduces the barrel by a few inches and increases performance and ease of handling. Turning the…
These are airvents that go inside an opel blitz (1970's). for a 45 mm and 55 mm hose.
Remixed to hold actual size Dutch blitz cards, and 2 full decks for up to 4-8 players. The slide channels are still a little flimsy, but I don't feel like redesigning and printing another, so someone else can tackle that.
Didnt feel like painting the red wipers i got with my Monster Beetle shell so i designed and printed a pair in black instead. Useful as a spare part as the wipers are liable to get ripped off and lost in a rollover so i figured id put the…
This card holder replaces the original crappy cartons that the dutch blitz game comes with. It can fit 8 decks and it has a little spot for the instructions. I also have an onshape model if you want to copy it and edit it directly:…
Economical, rapidly printing remix of Prusa RC3 face shield frame. Print instructions bridge_fan_speed = 25 bridge_speed = 60 deretract_speed = 0 external_perimeter_speed = 80% filament_cooling_final_speed = 3.4…
I've lost the body mounts over the years so I desided I'd build new ones. I didn't have the originals to hand, so the shape of the parts are freely chosen and built with the focus on easy printability. Parts: 9115049 I added a version…
This is a buttstock extension for the Motoblitz made to add ~ 40mm in length in order to make it more comfortable for me. For installation the two halves simply slide into the rectangular slot of the Motoblitz buttstock and then you screw…
Mount for BLITZ M10 GPS V2 for iFlight Nazgul Evoque F5X iFlight FPV M8Q-5883-GPS Module V2.0 Mount
The full size is now 3inx3inx3in Print Settings: Layers 0.20 mm layer height Walls 3 walls (≈1.26 mm) • 6 top / 6 bottom Infill Gyroid • 10% (adjust 9–11%) PLA Temps 205–215 °C nozzle • 55–60 °C bed
this is the maus which is very heavily armored
This adapter was remixed from the tungstenexe mag adapter, that was only compatible with the Nerf Stryfe, in order to make it compatible with the Motoblitz. For the printing Instruction refer to the original page of the model. I used my…
These are body mounts for the Tamiya Stadium Blitzer. Handy for doing a Blitzer Beetle to Stadium conversion as the Beetle Blitzer kit does not come with the Stadium Blitzer body mounts parts tree. I've only used these on a shelf queen so…
Attention à ne pas coller les chenilles penchées vers l'extérieur.
A hybrid clip-on pusher for the Nerf Motoblitz capable of pushing short darts and still fire long dats. Just print the clip upright and the pusher on its side and add a brim if needed. To install the pusher first slide the pusher part…
I recently acquired this nice Desktop Lamp from BlitzWolf that goes on the top of a monitor. It is very well built has a RBG backlight but came with a problem: the holder that makes the lamp stays on the top of the monitor is magnetic and…
This is a deck box designed with Flesh and Blood blitz format in mind. It can hold 52 cards, along with 4 that are in hard cases. It also has an area for tokens and dice. I didn't think to include it in the photos, but I do have a divider…
Bobble the head of your favorite Decepticon Ground and Air Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of…
To fit the shell i trimmed down the point of the chassi to the level of the bumper mounts and notched the bottom of the front of the beetle shell maybe 3mm. The files for this are the front+rear mounts, they attach to the chassi using…
Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…
Insert for the card game Dutch Blitz. Separates the 4 decks and helps keep them straight, cards get pretty banged up when playing with my friends and family :) Fits inside the original box but can be used without. This model is optimized…
Mount for FPV BLITZ M10 AOS CINE35, O3 antenna and antenna transmitters
This replaces the single mount rear upper arms on the Blitzer Beetle chassis with a more substantial piece. The mounting points need to be drilled out to remove the internal threading. The chassis side should be drilled to 4mm, the hub…
Model of a modern speed camera in scale 1:87/ H0. Suitable for creating a realistic diorama of a place or a street optionally available with and without a base (both files can be found in the 3mf file)
This battery cover was designed with an internal width of 29mm, a length of 106mm and an height of 23mm, which, combined with the 12,75mm of height of the original battery compartment arrives to 35,75mm, so it holds comfortably a 1000mAh…
the fv215b 183 is a concept tank developed by the British tank people which is an fv215b with a 183 millimeter cannon, therefore able to penetrate thick armor and deal massive amounts of damage. print with pla or anything takes an hour…
This holds your bats to show off, or to keep them organized. It will prevent your bats from getting lost. It is for baseball and all kinds of wiffle ball bats.
Just a stock rim (back) for your Blitzer Beetle. I needed another color.
Blood Bowl / Blitz Bowl base with inserts for two magnets: Square 5x2mm in the center for transportation Round 3x2mm center front to hold a magnetized ball I recommend to glue in the magnets in reversed polarities, so the ball will not…
Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…
Some modified heads that should be compatible with a certain company's torso bits. Category: Games
Options are included for all existing versions of Blitz Bowl to date (1st edition, 2nd edition, Ultimate Edition, and Ultimate Second Edition). For all editions you'll want to print 4 copies of blitzbowl_team_large_x4. The board, dugouts…
This is an easy to print hotshoe to arca swiss tripod mount adapter. In the part orienatation form the pictures there is no support needed. It has a hole to lock the flashlight onto the adapter so it cant loose itself. I made it for…
This 45° angled cold shoe mount is designed for Insta360 Flow gibal providing a stable and secure attachment for Rode microphones. The 45° angle is crucial for directional microphones to point straight forward, ensuring optimal audio…
The original Blitzer Beetle is built for a standard 540 brushed motor. Chaning the motor is no problem, but there is no space for the bigger brushless ESC. With these parts you can easily change the brushed motor to a brushless one…
Disclaimer : Use at Your Own Risk ! Using and/or working with/on 110-230 voltages or device(s) can be deathly and/or cause fire. It is not worth the risk to yourself, your family and your home if you don't know exactly what you are doing.…
I couldn't find a short dart pusher for the Motoblitz that fit and functioned properly, so I went ahead and created one myself. I've designed it to easily snap into place over the original pusher without needing to do any gluing or…
Blitz mit Stand Fuß. Perfekt als Deko im Büro auf dem Schreibtisch oder der Werkbank in der Werkstatt. Beide Teile sind passgenau. Für den perfekten halt müssen die beiden Teile verklebt werden. Um den stehenden Blitz zu drucken müssen…
Corvega Blitz is a pre-war car from the Fallout universe. It was produced by Chryslus Motors at the Corvega factory
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces.
I don't have time to iterate on this, but want to give it out to the community so here goes! This is my Blitz Pro faring kit to this moment. If I ever get back I may add a set / rear components to protect the linkage better. It was…
Com dimensões de aproximadamente 78x80x15 mm, este design 3D é perfeito para fãs do jogo e ideal para festas temáticas, presentes criativos ou para criar lanches divertidos. Fácil de imprimir e usar, garantindo cortes precisos e bem…
The fixes consists of some modifications to the screw posts of the models: The top rail had the screw hole deepened since it wasn't deep enough for the original screw and the screw post was lenghtened towards the rail since it was…
The Elite 2.0 Motoblitz is one of (if not the) most popular of its series, and for good reason. However, as a bullpup, I found it annoying to not have a flared magwell. So I designed one. This is a flared magwell that attaches to the…
Frontblitzer Box für Autoscheibe
Dart Zone Nitroshot Blitzfire2 Mods T-Pull + Printed Pin Rear Sight Insert for improved aiming Bottom Rail Cover for some additional color accent Spring Spacer (for the stock spring) All mods can be easily reversed if desired.…
These are mag holder inserts for the BlitzShorta foam dart magazine carrier system. I created a version of the insert for both the Zinc 2.0 and the Nightingale magazines. Added text to all, and to Spyder's Angled Talon version, and to the…
Introduction This is an add-on for the Nerf Motoblitz, to mount it you need to first remove the white attachment normally mounted to the blaster. Hardware 4 M3x10mm socket head screws 1 M3x14mm “ ” " 3 M3x20mm “ ” " 5 M3x40mm “ ” " If you…
Remixed the Talon magazine insert for the blitz shorta mag holder to accommodate angled talon magazines No supports needed
Juste un support fait rapidement pour le projecteur BlitzWolf® BW-V5 j'ai créé deux modèles: -un à fixer au mur -et un à accrocher ou vous voulez grace aux crochets Just a quick support for the BlitzWolf® BW-V5 projector I created two…
Build instructions available here: docs.google dot com/spreadsheets/d/1g5jIUJWbWFezjAryvxRHV_1Lpwh7UCHsRzlxletHD88/edit?gid=0#gid=0
The Flakpanzer IV Kugelblitz was a German anti-aircraft tank developed during World War II. It was based on the chassis of the Panzer IV and was designed to protect German troops and vehicles from enemy aircraft. The Kugelblitz was armed…
What is this thing? This is a box for the board game called: Ghost Blitz (aka Geistes Blitz). Why did you make it? If you happen to have the board game, then you probably have a rather large box that is mostly empty space. This new box…
Allows mounting charger under the desk, on the edge. Print two pieces (from any material you want; I used PETG). Use wood screws. Source file (Fusion 360) included.
for flat uppers (no FRDS) print upside down with supports. for FRDS variants print with the FRDS upwards and full supports. i recommend tree supports however the style doesn't matter
Introducing the Blitz Shorta, FoamQB Edition! These are shorta length Blitz Saya mag holders, but with personal optimizations, including a retention screw for the MOLLE fastener, as I run my holders upside-down. These are tested…
Top Mount for GPS IFLIGHT M10 MINI V2 on a NAZGUL EVOQUE F5 V2 with a protection for 6S LiPo (1550 Tattu R-Line here)
Our very old version of Dutch Blitz card game packaging has fallen apart. The plastic yellowed, became brittle, and cracked (see photo). I'm guessing it's around 20-30 years old. Here is a fancy case to hold the cards and make bringing it…
The small version of blitz shield.
Blitz Kaws Sculpture! If you enjoy the model please like and follow for more!
This is a drop-in barrel adapter for the Dart Zone Blitzfire X2 that I designed so I could put my other 3D-printed barrel cosmetics onto the end of the blaster. It requires opening the blaster up and may require some sanding and minor…
für unser lokales DRK haben wir einen Halter entwickelt, welcher Frontblitzer im Kühlergrill fixiert. Wichtig Hiebei ist ein sicherer halt und eine einfache Montage ohne Fachkentnisse. Verwendetes Material Prusament PETG mit 30% infill.…
I've used Xblitz phone holder with charger but unfortunately the sticky rubber used to hold it in place didn't work well due to textured surfaces in the car. This is a replacement for the base of the charger - I guess with slight…
Designed for .2 mm layer height. I printed it in PLA but should work with any material. This box was designed to keep each players cards stored separately and easy to get out.
cool tank print with pla or petg takes like 45 minutes you need to upscale it too please post makes
IN ARBEIT / WORK IN PROGRESS mehr informationen kommen demnächst / more information coming soon Druckeinstellungen/print settings: Düse/Nozzel: 0.4mm/0.6mm, Schichthöhe/layer height: 0.25mm obere und unterer Schichten/top and bottom…
Verschluß für eine 330ml oder 500ml Dose mit Opel Blitz und Schrift
ArcaSwiss Platte breit und schmal mit Blitzschuhaufsatz PETG 0,2mm
![Beyblade X Bit: Ignition [Bahamut Blitz] [UPDATED]](https://media.printables.com/media/prints/0800167a-7a80-41bb-9634-60d491147cf9/images/12253754_0739b8d3-ab35-407f-93f7-8b6065b2db4b_02a4ab4b-0335-41cd-b624-67dfcff7dece/ignition.png)
