Search results: brush

Sort order

7,165 models

P
Printablesfifindr

Hairbrush Cleaner

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
14,279
Likes
3,854
Rating
4.9
P
Printablesnuwbz

Oral B Toothbrush Charger Holder (US/NA Plug)

Reworked the German plug version of this Oral B toothbrush charger holder to accommodate the US plug model. The extra length of wire can be tucked into the bottom cavity for that sleek look. The plug holder has small tabs to retain the…

Print approx. €3.20–€3.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,601
Likes
182
Rating
4.8
P
PrintablesAlgernon

Airbrush stencil ST-TX001-cracked-wall-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
225
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX007-wood-texture-num2-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
246
Rating
5
P
PrintablesAlgernon

Airbrush stencile ST-CAM003-giraffe-camo-WWII-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
914
Likes
200
Rating
5
P
PrintablesJorek
18+

The source marked this model as adult content.

Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant

Downloads
838
Likes
201
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-CAM002-luftwaffe-WWII-spots-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
822
Likes
134
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-CAM001-luftwaffe-WWII-shingles-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
812
Likes
157
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX003-splash-stains-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
753
Likes
154
Rating
5
P
PrintablesJohnM

Paint & fluids holder for airbrush and modelling: Wall and ceiling mounted

I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…

Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant

Downloads
623
Likes
153
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF002-circle-textures-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
600
Likes
132
Rating
5
P
PrintablesAA

Toothcastle (Toothbrush holder) - Zahnschloss (Zahnbürstenhalter)

Toothcastle with drip tray (Toothbrush holder) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini The "tooth gates" must be printed with supports (already configured in…

Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant

Downloads
598
Likes
115
Rating
5
P
PrintablesExtra Fox

YANB - Yet Another Nozzle Brush

This is my take on the brush designed by "Makers Mashup" with some of my own thoughts on design features I thought would be helpful. The idea of a nozzle brush was entirely new to me, but made some sense. I have experienced on more than a…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
529
Likes
165
Rating
4.97
P
PrintablesAlgernon

Airbrush stencil ST-AIR004-USAF-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant

Downloads
527
Likes
113
Rating
0
P
PrintablesAlgernon

Airbrush stencil ST-AFV001-Assorted-german-WWII-tank-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
513
Likes
74
Rating
0
P
PrintablesAlgernon

Airbrush stencil ST-CAM004-pixelated-modern-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
503
Likes
121
Rating
5
P
PrintablesSpaceCadet

Airbrush Cleaning Attatchment for Mason Jar

Created a model for a airbrush cleaning jar lid instead of purchasing a cleaning jar separately. You can use whatever you like for the reusable filters and add a lid.

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
467
Likes
158
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX005-paint-stains-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant

Downloads
462
Likes
117
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF003-distorted-honeycomb-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
439
Likes
112
Rating
4.75
P
PrintablesKeither

toothbrush travel case

This screw together case keeps your toothbrush clean and safe while traveling. It needs to be printed in spiral vase mode. Since it is in vase mode, you need to print each part separately. I used a 0.6 mm nozzle with 1 mm external…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
408
Likes
45
Rating
5
P

Prusa XL Nozzle Scrubber / Brush

Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
394
Likes
59
Rating
4.85
P
PrintablesGilles

Brush pot 28 slots (version with and without Ikea Skådis stand) - Pot pour pinceaux 28 slots (version avec et sans support Ikea Skådis)

[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…

Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant

Downloads
366
Likes
45
Rating
5
P
PrintablesCalebTimoteo

Minimalist Travel Toothbrush Case - Travel Essentials

Any feedback would be greatly appreciated . NOTE: TOP PART should be printed with ZERO top and bottom layers, pattern infill of your preference at 15-50%. You could also rotate the piece so the pattern changes. (0.25mm clearence) Nozzle:…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
361
Likes
105
Rating
0
P
PrintablesDema_Design

Toothbrush holder

Toothbrush holder multicolor

Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant

Downloads
351
Likes
94
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF004-digital-numbers-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
101
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX006-wood-texture-num1-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant

Downloads
331
Likes
96
Rating
0
P
PrintablesFélix

Shaving brush travel case with stand V2 (parametric)

I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
299
Likes
54
Rating
5
P
PrintablesTSzilard

Toothbrush Holder Viking Ship

Toothbrush holder for five toothbrushes. Hole diameter: 17 mm Print without supports

Print approx. €6.65–€8.13 excl. taxPreliminary estimate for one variant

Downloads
286
Likes
76
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX004-petrol-spills-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant

Downloads
267
Likes
66
Rating
5
P
PrintablesGlennovitS 3D

Artsy Organizer (Brush, pen or tool desktop stand)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
69
Rating
5
P
PrintablesZbyněk Král

Brushes Box

Two simple boxes to protect your brushes. The internal space for your brushes is 235 mm. You can edit the models at the links below, on my OnShape. STEP files are also available. Happy printing! OnShape Links: Oval Box Triangular box…

Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
46
Rating
0
P
PrintablesAlexMu

Nail brush

important when hand cleaning that you whipe all viruses below your fingernails. Print instructions set bridge flow ratio to 1 so you get enough material for the brushes. If you want to decrease stiffness of the brush reduce to 0,7 - this…

Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
227
Likes
46
Rating
4.33
P
PrintablesAlgernon

Airbrush stencil ST-AFV002-Drum-oil-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
213
Likes
65
Rating
0
P
PrintablesAlgernon

Airbrush stencil ST-AFV003-soviet-numbers-WWII-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
45
Rating
0
P
PrintablesLukas

Compact electric toothbrush traveling case

Traveling case with aeration holes and a sliding lid for Oral-B electric toothbrush with 2 heads

Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
16
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF001-gear-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
50
Rating
5
P

Voron 2.4 Nozzle Brush with Removable Purge Bucket (6x3 Magnets)

This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…

Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
26
Rating
5
P
PrintablesAlexMu

universal brush for hair or dish cleaning

easy to print brush. Can be used for beard - as i do - or hair. Works very well to clean pan or dishes. If after cutting the tips are to sharp use a lighter and give them a short heat - this will round the tips of the brush. Print…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
162
Likes
27
Rating
0
P
Printablesdrewgraham80

LongMill Brushey Dust boot V1

LongMill Brushey Dust boot V1 Dust shoe requirements (in no order): Dust shoe that does not require me to lose cutting area Easy on / off for bit change Travels with spindle Good dust suction / collection Allows me to have enclosure door…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
21
Rating
0
P
Printablesbigrjsuto

Charging Induction Cover/Stand for Sonicare DiamondClean Toothbrush Charger

My dog destroyed the inductive charging cover for my charger for my Philips Sonicare toothbrush. Made a replacement

Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
138
Likes
14
Rating
3.33
P
PrintablesBenoît Lussier

Case for small artist brushes or pencils

Simple case for your small artist paintbrushes or pencils. The top cover is threaded in the base. So you can't lose the contain accidentally.

Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
20
Rating
0
P
Printables3DEngineer

Oral-B brushholder

A simple and useful design of an Oral-B holder.

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
7
Rating
0
P
PrintablesMakePro

Prusa XL scrubber brush designer buckets in high mesh resolution and nozzle hole

Reexported model with high density of mesh because i would like to have quality and added hole for long nozzles.

Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
12
Rating
5

Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
11
Rating
5
P
PrintablesCraig Heath

TePe Interdental Brush Stand

A remix of WillYerb's elegant brush holder. I added one more row, so that when I'm using the last one of a colour, I can add a new pack of 8 behind it, plus two extra columns for different sizes. I also made it 3mm taller, so that the…

Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
3
Rating
5
P
PrintablesAndré Chaves

Ender 3 V3 KE and SE automatic nozzle cleaning brush PROCEDURE

M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature G28 ;Home all axes G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up M104 S[nozzle_temperature_initial_layer]…

Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
24
Rating
0
P
Printablespueckler

Toothbrush case / Etui für elektrische Zahnbürste

The case holds one electric toothbrush (e.g., Oral B) with a diameter of up to 33 mm and a length of up to approx. 230 mm. I've added a second version with an inner diameter of 34mm, since some of the newer Oral B brushes have slightly…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
18
Rating
4
P
Printablesclausb007

Hand brush / broom / Handfeger

A simple little hand brush – ideal for use in combination with an attached tabletop waste bin. The ends of the broom will stick together after printing (PLA works perfectly) and therefore need to be cut off (e.g., with diagonal cutters).…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
6
Rating
5
P
PrintablesKongolasse

Toothbrush stand for 3 Oral B toothbrushes.

An elegant toothbrush stand for 3 toothbrushes of model Oral B. The hole where the toothbrush is placed is 28mm in diameter so the toothbrush can't be larger than that. This is just a stand and has nothing to do with charging the…

Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
1
Rating
0
P
PrintablesTodd D

Bissell Little Green Pro 3194 Brush Holder

This is rather specific but maybe someone else can use. My new Bissell 3194 Little Green Pro cleaner came with two brushes but nowhere to store the 2nd one. I know myself and knew I would lose it quickly, so I fired up TinkerCAD and…

Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
13
Rating
5
P
PrintablesKizzard

Ecovacs Deebot Brush Roll Shaft Adapter

Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
10
Rating
0
P
Printablescodos

Dual Brush (and more) Holder - keep your desk clean

A little helper for everyone, who uses brushes. Can store up to 4 normal sized brushes or 1 big. Just flip it over. Very useful for: Cosmetics Art Painting miniatures Chopsticks Knifes coocking spoons etc. Ideal gift for your SO, prints…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
27
Rating
5
P
PrintablesGasti

Shaving brush holder

Rasierpinselhalter, für Rasierpinsel und ggf. Rasiermesser, einfache Ausführung ohne Stützkonstruktion Shaving brush holder, for shaving brushes and possibly razors, simple design without support structure

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
8
Rating
5
P
PrintablesRaul Melnik

Ender 5 Pro Nozzel Clean brush

Modification required before activating nozzle cleaning https://www.thingiverse.com/thing:4410969 That is the part of the code that needs to be replaced G92 E0 G1 X2.0 Y140 E10 F1500 ; prime the nozzle G1 X2.3 Y140 F5000 G92 E0 G1 X2.3…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
21
Rating
4

Ergonomic Press-Fit Handle for Silicone Nozzle Cleaning Brush

It’s a press-fit handle designed for the Bambu Lab A1 Nozzle Cleaning Brush. Printing recommendations: Use at least 4 perimeters for added stiffness Compatible with 0.4 and 0.6 nozzles Print with a high-temperature material. PETG HT 100…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
8
Rating
5

Oral-B Brush Head Holder (4 Slots) | Soporte para cabezales de cepillo Oral-B (4 cabezales)

[English] Holder for four Oral-B or compatible electric toothbrush heads. The base has a diameter of 60 mm, providing good stability. Each slot for the brush heads is rectangular, measuring 6.8 x 3.5 mm with a height of 14.8 mm, ensuring…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
4
Rating
0

Prusa XL : Nozzle brush/scrubber when changing head

Thanks to the idea of Surfalex2000, https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu/comments Here is my version without screws

Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
19
Rating
4.5
P
PrintablesWard Morrison

Braun Oral-B Electric Toothbrush Head Holder

When this was designed, I wasn't great with TinkerCAD so the blades are not meant to spin. I have included a spare set of blades and a pin in case the first does not work out. I had an issue figuring out the weight of each piece, so…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
5
Rating
0
P
PrintablesMatKe

Tombow ABT Dual Brush Pen Holder

Pen holder for 8 Tombow ABT Dual Brush Pens

Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
7
Rating
0
P
PrintablesoXiVanisher

Airbrush magnetized storage for bottles

A magnetized storage bin for airbrush bottles (primer, cleaner, ...). You have to print this two times and then stack and glue and ideally screw it together. You need: 8x 6 x 2 mm magnets 4x M3 x 6 mm (or longer) screws 4x M3 nuts This is…

Print approx. €8.61–€10.52 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
10
Rating
0
P
PrintablesDr_Keenbean

Minimalist Brush Holder

Minimalist Brush Holder Does what it says on the tin - Prints quick, uses little filament, and keeps your brushes from rolling around your desk. No supports. Use whatever material you like. Print & go. Changelog [26-09-2025] - Add larger…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
4
Rating
0
P
PrintablesoXiVanisher

Airbrush magnetized storage for airbrush tools

A magnetized storage bin for airbrush tools. This bin has a total height of 28 mm and the inner height is 26.8 mm. My Harder & Steenbeck nozzle and air head case fits perfectly inside it. You need 8x 6 x 2 mm magnets This is part of my…

Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
10
Rating
0
P
PrintablesWhiteDragonD

Acrylic / Air Brush Paint Rack

2oz acrylic paint holder, air brush bottle holder, any other bottle holder that will fit in the tray. Designed to fit onto a shelf and collapsible, includes a wall for a full size print or split into two pieces that can be glued or use…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
12
Rating
0
P
PrintablesMads T

Gearknob for the toilet brush

The gear knob shaft can max be 18mm wide The big version can max have a 25mm wide It will possible ask for support when slicing you have to fill paint in the text or if it is light filament maybe pause it after first layer over the text…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
16
Rating
0
P
PrintablesoXiVanisher

Airbrush magnetized storage for random stuff

A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…

Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
6
Rating
0
P
PrintablesSJM

octagonal Toothbrush Stand for the bigger ones Zahnbuerstenstaender

This is my bigger variant for oversized 16mm thick toothbrushes toothbrush stand (zahnbürsten ständer) in octagonal style. The stand is open on the bottom to let the brushes dry and make it easier to clean the stand plate. The stand has a…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
5
Rating
0
P
PrintablesExtra Fox

Paint Brush Rack - Small

This rack provides vertical storage of hobby paint brushes on one side, and on the other, a place to allow brushes to dry with the brush facing down. One word of caution. 3D prints aren't necessarily great at retaining liquids and…

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
11
Rating
0
P
Printablesalvarezcabrera

Vacuum cleaner tip with brush

An accessory for the vacuum cleaner with very small holes and hairs. You can use it for getting dust or very small dirt without loosing some other small valuables :) I also have used in the garden to help removing some pests (plant lice)…

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
6
Rating
0
P
PrintablesSadet

Spork ultralight toothbrush

I created model to make an ultralight toothbrush using a Snow Peak titanium spork as the handle. Mine weighs 0.15oz (4.25 gm). I was inspired by the video about “The Burner Sporkbrush” on YouTube by Benjamin Burner. You will also need to…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
0
Rating
0
P
PrintablesRyanR

Chimney Sweep Cleaning Brush Head

I needed to clean ("sweep") my chimney, and when I saw the retail brushes, I knew I could design one too easily myself! (See last picture for sample product I found on Amazon .) This brush head requires a few “post production”…

Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
2
Rating
0
P

Oral B Genius 10100S brushstand/driptray

Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!

Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
5
Rating
0
P
PrintablesMads T

Gear knob for the toilet brush ( Netto' super marked)

Print it upside down, some support for the lines and letters will not harm.

Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
7
Rating
0
P
PrintablesFloppy-MV

Nozzle Brush Remix - no supports and shorter handle

Just a quick remix with a shorter handle.

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
5
Rating
5
P
PrintablesGlennOsiris

Tooth Brush Cover for ACE Wire Brushes

Printed with a brim so some clean up of the brim is required for the snap clip to work. Use a 1.75mm filament as the pin for the hinge. Enjoy! No guarantee as to its life. :-) Also uploaded to Thingiverse.…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
7
Rating
0
P
PrintablesrojoPrint

Sonicare ToothBrush Holder Remix Larger Plug Back

This is a remix of my remix of @Charleszard Sonicare Wall Mount Charger . This version has a larger opening to allow variance for plugs with a larger back, as a special request from Eug @euggersh .

Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
4
Rating
5
P
PrintablesMBLX

Detailing brush nozzle for regular house vacuum cleaner

This nozzle adapts to normal household vacuum cleaners

Print approx. €2.00–€2.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
0
Rating
0
P
PrintablesAllie

OXO Good Grips Deep Clean Brush Set Gridfinity Holder

Here's a link to the brushes: https://www.amazon.com/dp/B073R3D1C9 I use them to clean PCBs and plastic housings.

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
10
Rating
0
P
PrintablesPrinteyy

Electric toothbrush holder (Phillips Sonicare) - horizontal version

I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…

Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
1
Rating
0
P
Printablescr0n1

Toothbrush holder with removable drip tray

Made myself toothbrush holder with dividers and removable drip tray. The drip tray does not snap on.

Print approx. €3.20–€3.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
3
Rating
0
P
PrintablesMike

Ikea LILLHAVET brush holder

Created a simple brush holder so it couldn't fall out or drip outside the bucket.

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
1
Rating
0
P
PrintablesSwa_Ff

Hoof Pick - brush / pinceau - cure pied

ENGLISH : Here we can see two models which are based on the sport of horse riding: -a hoof pick: it is a useful object which has a piece of steel and bristles in order to clean the sole and frog of the horse's hoof After printing the…

Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
1
Rating
0
P
Printablesyawutheawu

Gocheer 40 PSI Airbrush Kit Storage Box

A storage box for this Gocheer Airbrush Kit , specifically the 40 PSI version, but as long as the compressor is the same size, it should work for the 48 PSI option as well. Test print uses a low infill % (5%) and low top surface layers to…

Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
3
Rating
0
P
PrintablesCaolan

Kids’ Bathroom Organizer – Toothbrush & Essentials Holder

🪥 Kids’ Bathroom Organizer – Toothbrush & Essentials Holder Keep your kids’ bathroom counter neat, organized, and a little more fun with this multi-compartment bathroom organizer . Designed with a combination of tall and low compartments,…

Print approx. €7.24–€8.85 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
4
Rating
0
P
PrintablesLinuTec

Toothbrush Holder for/Zahnbürstenhalter für Oral-B

Toothbrush Holder for/Zahnbürstenhalter für Oral-B

Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
4
Rating
0
P
PrintablesGuruen

Nozzlebrush - Hexagon version

I needed a brush that fit the pads i had access to (30x30x3mm), so i decided to create my own. Can be printed without support. So here it is, simple design but works great. Design inspired by the hexscraper and hexagons! Materials needed:…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
2
Rating
0
P

Hook for grill storage (to hook: Sweeper and brushs, bags, ...)

( Please suggest in comment a better title, summary and description , had hard time to explain it. I will update this product infos with your suggestions.) On the picture I finger point the 3D Model. details: Suitable for various…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesJC

Silicone Nozzle Brush (stick)

Silicone Nozzle Brush (stick) I wanted a way I could hand clean the nozzle when hot on my printer. This works great. I used a silicone finger cot that has a brush. I pull it up over this 3d printed board and now I can brush my hot printer…

Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
3
Rating
0
P
Printablessjugge

HSW hook for Amazon basics soft grip brash brush

Printing Material and settings should not be all that important. 0.4 nozzle with 0.2 layer height walls and infill: defaults will be fine print orientation: same as STL OpenSCAD Requires HSW lib and BOSL2, see here for detail .

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
PrintablesPavel Hanuš

Kryt proti cákání vody/ water brush cover

záchyt vody při leštění, broušení

Print approx. €7.47–€9.13 excl. taxPreliminary estimate for one variant

Downloads
3
Likes
2
Rating
0
P
Printablespowerpc750

robot cleaner dibea d960 brush holder

It is expensive to try to purchase the rotating brush for the slightly older robot vacuum cleaner dibea d960. So, I created a holder to reuse broken brushes. If you don’t have a broken brush, I think you can buy a brush from another…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
PrintablesJamesThePrinter

Toothbrush Travel Case

A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…

Downloads
32,752
Likes
10,306
Rating
4.86
P
Printablescodewarriorr

Toothbrush Travel Case print in place

Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…

Downloads
24,415
Likes
6,508
Rating
4.9
P
PrintablesAdam L

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…

Downloads
8,015
Likes
3,241
Rating
4.92
P
PrintablesDomes

Toothbrush Case

Reduced size, edited for better fit in. Remixed from: https://www.thingiverse.com/thing:4569222

Downloads
7,644
Likes
853
Rating
4.78
P
PrintablesMany24

Brush holder 6 slots

This is an update of my original model Brush holder od autora Many24 | Stáhnou STL model zdarma | Printables.com It keeps the same simple and minimalist design, and adds double the slots for the brushes. Print instructions Printed in PLA,…

Downloads
7,101
Likes
2,397
Rating
4.96
P
Printablessaulquinn

Paint brush holder

Supports are not required! You have to mirror the given stl in order to get both halves. Do not print it the same way twice. You can print them in an interlocking formation to save room on the build plate. (see picture)

Downloads
7,042
Likes
1,369
Rating
4.7
P
PrintablesPRSPR

Toothbrush Holder

Holder for 2 toothbrushes and toothpaste, includes a removable drip tray and feet.

Downloads
6,525
Likes
1,060
Rating
4.83
P
Printablesone|by

Kawaii Toothbrush Holder

Edit 06-07-2021: Model with drainholes is now available ;) A toothbrush holder to bring cuteness and magic in your bathroom Print instructions This little tooth is ready to print. Layer 0,2mm Infill 5% to 10% No support needed Brim is…

Downloads
6,174
Likes
1,306
Rating
4.94
P
PrintablesDeltaprints

Modern Ribbed Toothbrush & Toothpaste Holder

A timeless ribbed holder for toothbrushes and toothpaste. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files…

Downloads
5,805
Likes
1,285
Rating
5
P
PrintablesLayerModels

Toothbrush holder voronoi

Design can only be manufactured with 3D printing and will definitely catch anyones attention! Print tip: print in PLA with low print temperature and sufficient cooling to print the voronoi cell overhangs. CREATE CUSTOM 3D PRINT MODELS ON…

Downloads
5,178
Likes
891
Rating
4.95