1,057 models
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
I needed a guide bushing for the smaller holder for the makita router. One I intend to use to make finger joints. The annoying part is that the holes for the screws are not in a nice concentric circle around the axle of the router. So it…
This is a adapter for bushings, eg. broncebearing. I've paused the print at 19.75mm and inserted the broncebushings, then resumed printing. I used http://prusaprinters.org/color-print/ for that. make a few tests while adjusting the inner…
There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…
Lost one of the Small Bushings, so made a replacement. Printed with ColorFabb HT, Auto Organic Supports.
Shifter ball bushing i recreated for my 1999 Chevy metro. Print 2 of them for top and bottom.
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
Enhanced Z rod grease contact bushing caps for the Elegoo Centauri Carbon. These grease cap bushings feature easy application port reciprocals that interface with the stock grease tube originally included with the Centauri Carbon. The…
The PolyMaker cardboard spools are great except for the friction. These spools were straining my printer and the filament always looked so tight between the spool and extruder. Some designs use bearings, but this seems like overkill and…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Please see https://www.printables.com/model/970292 for the updated and much superior dual durometer design After testing numerous printable door bushings, I found most to be unsatisfactory. They either didn't fit properly, required…
My printer came with resonance on the X-axis, and I was instructed to perform cleaning. With this print, it's possible to easily remove the bushing without damaging the axis or the bushing. The usage is simple, after disassembling the…
I recommend 4 top and bottom layers, 3 walls, 30% infill.
Printed in PLA using just standard print settings. I have these numbered according to MEC's bushing sizes, but because everybody's printer prints differently, the actual hole size may differ. You could either adjust your hole horizontal…
I made this model to fix a broken transmission cable bushing on my 2012 GMC Sierra 2500 so that is the only vehicle I can confirm that it works on. I printed mine in PLA with 100% infill and it is working so far, not sure how long it will…
This is a set of router bushings for the Dewalt DWE618 series router. It is also compatible with Porter Cable, Makita or other routers with a 1-3/16" diameter center hole sub-base. The sizes in this set correspond to the ones found in the…
There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…
The bushing for the "Reality Space Pi". The outer diameter of the PTFE pipe is 4 mm. PETG 0.16mm Infill 15% Without support The part has a short printing time for layers, for the best result, I recommend setting the movement speed as low…
Meet The Rockhopper Make both yourself and your workflow at least 300% cooler with the Rockhopper, a durable, totally printable, ultra refined balisong utility knife that takes standard Stanley style blades. Those boxes and packages will…
This is an easily printable bearing (more like a bushing) with the size and shape of a standard 6801 ball bearing. It has two separate pieces that when printed are captured together but can still rotate. This works for a stand-in while…
This is fully flippable balisong knife with bushing and zen pinless design. Weight of printed parts - cca 40 grams, with aditional wight in handles 50 grams. Lenght of whole opened knife is 257mm and closed 145mm. needed parts: blade - 1x…
This is a remix of the Tracksaw Guide plate/adapter for Makita Trim Router by @JohnMartin . This is still a work-in-progress, further fine tuning tolerances. In this remix, I made the fit of the grooves for the track saw guide rail a bit…
These bushings have been designed to enhance the shifting feel of VW manual transmission vehicles, allowing for more precise and crispier feeling shifts. This is a remix of Alberhasky_Designs ( Volkswagen MK7 GTI Shifter Bushings ) I have…
I created a Vespa rack hold down clip and Vespa rack bushing. The purpose of the clip is to hold a rear or front rack in the down position but it can also lock it in the up position, and so the clip can be stored effectively on the rack…
Cable Retention Bushing / Gland for USB cables, for example from arcade sets from Aliexpress. Lock tab is 8 x 8.5 x 1.6 mm. Cable is 4 mm. For holes 18 mm or 22 mm. I printed a layer of 0.16 mm.
Retaining clip for DieselGeek's amazing first gear getter bushing. Under heavy use, the bushing may fall out due to its friction fit. This 3D printed plastic clip slides over the bushing and holds everything securely in place. You can…
EN: PTFE Bushing for Table IKEA LACK This model will help you safely pass all five tubes through the IKEA LACK hollow table for your MMU upgrade. Even if the enclosed nuts have a sufficient margin of tolerance, I recommend cutting the…
Major issue that comes up frequently in later model Australian Ford territory and falcons is the degradation of the bushing or grommet around the transmission selector arm. These will fall apart at the most inconvenient time possible -…
Redesign of the die box that comes with all Lee loading dies so that you can leave the Hornady LNL bushings on the dies in storage (original Lee box was too small and lid would not snap shut). Should be good for all caliber dies as their…
Miata Solid Door Bushing. Will solve your door rattle issues. Expect to notice an increase in stiffness. ABS or PETG recommended. I printed it in ASA with 3 perimeters and 15% infill. You can use more. No issues more than a year later.
I had a wobble on my rear z rod. I made this little bushing to fix this issue. I printed 4 of it in different heights for variation to adjust the gap between the z rod and the top bearing (2x 0.6mm, 1x 1mm & 1x 2mm) Print in ABS or at…
General Pressing in the subframe bushings (e.g. 3507923, 3507924) into Volvo P80/P2 subframes is challenging, because they sit very tight, have to be oriented correctly and when pressing on the rubber “crown” or the inside part of the…
Wasn't fully satisfied with how the other single piece "Ultimate" bushings performed; The 2 piece design solves every issue with door bushings, so they're longer lasting and have a tighter, more solid fit. They have the same adjustability…
See update history at the bottom of this description. NOTE - These bushings are designed to keep the anti-vibration feet from falling off of the printer when moving it. For reasons explained elsewhere, they weren't designed to take a lot…
A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.
EDIT: Added a tiny MR126 bearing - 26th October 2017 Added a 605 bearing - 11th January 2018 Added 606, 623 & 695 - 16th January 2018 Added 625 (incl. Fusion360 file) - 27th February 2018 Added 6003, 6204 - 19th February 2023 Added custom…
10mm Screw and Nut with a tight Lead-Thru-Hole for 4mm PTFE-Tubes
This model is designed to ensure a tight fit of the IGUS Bushings. There are 3 versions: Made for RUTHEX M3 Inserts Made for Hexagonal Nuts (included in MK3/S Spare bag) Made for Square Nuts (included in MK3/S Spare bag) Required Parts:…
This set includes five different sizes of bushings that fit the Milwaukee trim router's large base. They push in and stay securely. There is a 3/8, ½, 5/8, ¾ and 1" bushing to accommodate different sized bits. There is also a baseplate…
These buhing are designed to fit to spring base shape, in such way that when tightening there is no deformation Print Settings Notes: Layer Thickness 0.1mm Speed 5mm/s Category: 3D Printer Parts
This is a trip-lever handle bushing and nut for many Kohler toilet models. It is reverse threaded (lefty tighty, righty loosey) as is the original part. The stock nut should fit this replacement bushing, so only print the nut if you need…
spare part for mercedes vito 638
This is a quick design I drew up in Fusion 360 for my R33 build as old ones were blown out
UPDATE 10/14/2026: I made some changes to the NPT library, so the relevant files were updated accordingly. ============================================================================ I wrote an SCAD tool for generating pipe threads that…
If you've got a Ford truck with rattling doors, it's likely you need new door striker bushings but you can't buy them without the full bolt assembly - seems like overkill. Took no time to model and print this up and presto! No more…
This base was designed for to replace the standard square plastic base found on many generic trim routers, and in the case, specifically the Ryobi RTR400S and RTR300 and generic trim routers. It will allow the fitting of a range of common…
Bmw E30\E28 - wiper arm bushing (for passenger's side on LHD, and driver's side on RHD). OEM number: 61 61 1 370 387 Perfectly fits on its place. Fusion360 source-file (*.f3d) attached. ---------- Update [04.09.24]: shape updated, now it…
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…
I designed these replacement bushings for one of the gear linkage rods of the golf mk4 since you can buy only rod + bushings. In my case the rod it's still almost new except for some dirt, so I decided to make the bushings on my own. I…
The Ender3 V3 KE used to have two screws in the front that would hold down the linear rods in the base housing. Recently, there was a design change and Creality eliminated those screws (they were also too short). Now, on some production…
This openscad script lets you create bushings for tubes.
I've seen stuff like this for sale online but didn't want to wait for them so I took the time to reverse engineer and test fit. I did 100% infill ASA and included my orca slicer project files for an Ender 3 V3 Ke. PETG would work though…
This is a subframe bushing insert I modeled for the P2 and P80 chassis Volvo's. It is inspired by the IPD Subframe Bushing inserts (linked below). I bought a spare bushing and created my own design as shipping their parts to Canada was…
These bushings can easily crack or become damaged due to extensive use over time. This model is an easy replacement. The model is the fairly common 18/20mm Ø. The ones in the pictures are printed using Esun PLA+, with the regular 0.2…
This bushing prevents the bowdentube from being pulled into the dryer box when filament is being pulled by the extruder. Printed in TPU.
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.
BMW F10 Differential Bushing Insert. Print at 100% infill, I used TPU 95a durometer but can also use PA-CF or any other hard material. This is inserted into the bushing to stiffen it.
I converted my monoblock AC to two hose operation, for this i needed a quick disconnect adapter to mount on my plastic window insert that already houses the exhaust hose of the AC unit. This works beautifully.
Sie können es als Platzhalter, Ersatzteil oder zum Konstruieren verwenden
Shifter bushings for Honda Acty HA4. -Ball cup -Shifter assembly bushings -Big bushings -Small bushings Printed in PETG, 100% walls. Make sure your filament is dry before printing the ball cup. If it breaks when pushing it on the socket…
I picked up a set of Rockler router bushings which fit standard sized routers well. I also have a DPW611 compact rounter. Sadly, the plate that comes with that can't take bushings. The model is a simple circular plate that has matching…
Replacement base plate for the Dewalt DPW611 trim router that will accept standard 1-3/16" bushings. Model has been opened up to provide decent visibility and airflow. Same thickness and mounting holes as the original base plate. Slightly…
I suggest print theses models in TPU 95A material.
I slightly modified the bearing, I made a little chamfer on the bottom and on the top to make it much easier to use it straight away rather then remove the edge on the bottom. I didnt want to have the chamfer too big becasue I want to use…
Hello! Here is a MX5 door bushing I designed.
These door bushings are an upgrade from the OEM door bushings that came on your Honda Pioneer UTV. The door bushings will fit all 1000 (2016-2025) and 700 (2014-2025) models! There are two bushings for each door. Recommended materials:…
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
I made this so I could pass through the power supply of my heat pump into my technic box without the need to cut off the power plug, which would void the warranty of the heat pump. The cable bushing requires a ø40mm hole to be drilled and…
This is a remix of the gear-mounting bolt for the wonderful yarn winder model posted by BGDglider . The original model worked well for me with one exception: each screw that holds the drive and middle gears in place…
Modeled to be as big as possible. might give issues with door fitment. I advice ABS or PETG or something less brittle than PLA. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20%…
I recently bought new bushings for my Subaru, and before I put them in, I modeled them in CAD, I haven't tested them, Just modeled them. Therefore, Print at your own risk. Update: Tested out the shifter joint bushings and made some edits.…
I was building the car for one of my daughters and lost a few of these bushings, so I CADed it up real quick, and printed it in PETG. It fits perfectly, and prints in around ~10min on my Ender3 S1. Good luck Dads!
A replacement sleeve for an Ergotron monitor arm. Should fit knock-off models (like Amazon Basics) with a 34.5mm or so hinge pin. Probably want to print in PETG so it has similar flex and slickness to the originals.
Makes the installation of the bushing easier when the tool is clicked onto the fork tube. PETG ,4 Perimeters, Infill 15% The parts are printed as they are positioned in the STL file. Both parts are printed simultaneously.
I wanted to make an easy-to-use case for suspension-bushings -also called "pills"- for my Xray XB4 and XB8. As Team Xray uses these same components in other (offroad) cars, the boxes are also suited for the XB2 and the XT2 It helps to…
Replacements for lost or broken nylon cymbal stand bushings on Pearl 900 Series-compatible stands. Modeled closely on the originals, with a few design changes for 3D printing. They work the same way and accept the original screw. Fits:…
2006 Scion XB Hood Prop Holder&Bushing The things that the hood prop need. Print in PETG recommended use auto generated supports
Just a copy of the Scubapro Tool needed to insert the piston bushing when servicing a Mk20 or Mk25 (EVO) first stage. I got the measurements with calipers from a machined version of this i own. It should do the job just fine, but so far i…
Subaru sambar Shifter bushings to my KS3 sambar 1995 May or may not fit KS4
Print two, carefully slice off any seam on the inside edge, and clip onto the spools. This allows the cardboard spools to feed out with significantly less friction.
I was getting ready to assemble the wonderful Pastamatic spool winder and figured it'd be nice to have a bushing to use with my arbor press to seat the 608 skate bearings, so I whacked one up in TinkerCAD. I imagine it could be used for…
Can print from ABS or PETG. 2 variants included, 45º cutout, or no cutout. If no cutout you have to saw it to measure and give it some heat to push it into place.
a small bushing for door knocker on my 1995 GMC van, although it should work for many similar age chevy/gmc vehicles. it is a bit difficult to get on, but once it is it works very well. helps with rattling/ poorly closing doors printed…
This is a model of the bushing for the Daewoo Matiz steering column. The original part, after almost 20 years of service, simply fell apart at my feet one day. You can print the bushing in one piece or cut it into two halves in your…
The tailgate bushings in my Ford F150 finally wore out to the point it was hard to close the tailgate... You know what that means! Yep - Time to fix it with 3D printing! I modeled this set off my worn out parts and eyeballed a few things…
Fiat 500 shifter cable bushing. There is a recall for those, but it's helpful to have a quick replacement in case of temporary situation.
This is a bushing holder for pen turning bushings. They slide onto the stem of the bushing holder, but don't slide back off. Each holder has a 3" x 5/8" tab for a label (good for the Avery 6870 2.25"x0.75" labels). The bushing holders…
FreeCAD files are provided, so remixing and customizing is as easy as possible. If you find an issue in my models or have a request to modify them, please shoot me a message. UPDATES: V3 Bushing is now easier to install, previous model…
Uploading this to address 2 issues with the status quo, affecting any 924 or 944 with the steel front control arm design. Note that this is discussing the outer bushing, at the control arm. Stock rubber bushing will only work with the…
These bushings (range of sizes) enable grasping the rounded end or sphere of a spindle. Please see my video for an application on www.AsWoodTurns.com From one end, the bushing is hollowed to accept a sphere of the given size. From the…
If you like this model, check out my profile for more designs and don’t forget to leave a like or follow! Description: This set includes 49 different bushings for longboards and skateboards. There are 7 shapes (Barrel, Cone, Fat Cone,…
I designed this part a few months ago for a friend's aunt. Office furniture is kind of a big deal where I live and it is fair to say the chair was made locally. So, it was only right to fix it locally as well. As you can see in the…
Decided to make my own door bushing since I was never fully satisfied with the one I downloaded. They were either too loose or too tight. I made mine simple with virtually no play with the correct radius so they fit properly in the cup.…
Matière : TPU Remplissage : 100% type de remplissage : peu importe Mur : 2 hauteur de couche : 0.2mm Support : non
Needed to install a Hornady Lock-N-Load Press and Die Conversion Bushing Kit onto my RCBS Summit press. The conversion kit allows you to use the Lock-N-Load die bushings on any reloading press that has a 1-1/4" - 12 threads. I used the…
Simple bushing to reduce the force required to unwind a spool of PolyMaker filament!
Subaru sambar Gear linkage bushing rear 4 pcs needed and 4 orings 14x19x2.5mm Abs or other heat resistant material recomended
This is a model of the plastic shift change ball/ bushing that goes on the shifter ball of the bottom of the shift lever of a 92/95 civic, 93/97 del sol (This is the bushing the lets the shift lever rotate in the shift linkage). NOTE:…
Parametric flanged bushing. You can set the sleeve inner/outer diameter, sleeve height, flange outer diameter, and the flange height.
