Search results: c18

Sort order

130 models

P
PrintablesJeffeb3

Makita Battery Charger DC18RC Wall Mount

Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…

Print approx. €3.35–€4.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,786
Likes
568
Rating
4.96
P
Printablesfablab.ee

Makita charger DC18RC wall mount

Makita DC18RC wallmount 2 files (sorry only gcode available) Petg 0.2 / time: 6hr Flex 0.2 / time: 1hr Charger easy to take off, if needed

Print approx. €5.11–€6.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
321
Likes
45
Rating
1
P
PrintablesJohannes E

Makita DC18RC Wall Mount

You need 3 M3x10 or M3x12 Screws and 3 M3 square nuts to screw the parts together. I suggest to first insert the square nuts in the bottom part, than mount the bottom part with 2 6mm countersunk screws at the wall and than screw the upper…

Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
56
Rating
5
P
Printablesdjedje_zr7

Wall mount for Black&Decker STC1840EPC Grass Trimmer

Wall mount for Black&Decker STC1840EPC The wall mount is in 2 parts (one for each handle) and 3 washers. There are 3 conical washers to prevent cracking of PETG when tightening the screw

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
101
Likes
16
Rating
5
P
Printablesinvendelirium

Gain knob barrier for UMC1820

I have made a microphone array for measuring polar patterns and whatnot, and it is important that the gains of all the mics are matched. Tuning them is an elaborate procedure, yet it is so easy to bump a knob off of the tuned position,…

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
3
Rating
0
P
Printablesvivamus3d

Makita Charger DC18RC Wall Mount

I created this model for a friend, as he didn't like the much simpler wall mounts like this as they utilize the holes of the rubber feet, which have to be removed. And the charger is fixed permanently to the wall and can not be quickly…

Downloads
3,215
Likes
144
Rating
4.8
P
PrintablesPiotr W

Makita DC18RD Dual Battery Charger Mount

This is remix of: https://www.thingiverse.com/thing:4097627 . Please note the natural shrinkage of the material and add 1% in the slicer if your filament shrinks a lot after printing. Enjoy ! Print Settings Printer Brand: Creality…

Downloads
2,277
Likes
268
Rating
4.77
P
Printablesder-pw

Wallmount bracket for Makita Charger DC18RC

I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…

Downloads
1,806
Likes
174
Rating
4.86
P
PrintablesNelsonClark

Makita charger flat wall mount for DC18RC, DC18SD, DC18SH

A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use. To install charger, screw…

Downloads
1,228
Likes
97
Rating
4.9
P
PrintablesJXC

Makita DC18RD Wall Mount

I made these to fit into the little rubber foot holes on my makita chargers. If the holes don't print “EXACTLY” as tight as you need them to on your printer, I would advise using a small amount of masking tape to tighten up the fit. The…

Downloads
1,087
Likes
115
Rating
4.67
P
PrintablesCasper

Makita DC18RA Battery Charger Mount

This is a mount for the Makita DC18RA Battery Charger. It is slightly different in dimension to the DC18RC. This design was heavily inspired by https://www.thingiverse.com/thing:3688254 but is not a remix in that it was created from…

Downloads
875
Likes
82
Rating
4.91
P

Ryobi Charger (RC18115) Wall Mount Cradle

This solves for the odd annoying geometry of this charger so you can mount it to the wall, like most of the other chargers allow. It sits nicely without any kind of adhesive but if you want a more secure solution, double sided tape or hot…

Downloads
699
Likes
68
Rating
4.78
P
Printablesblade42

Wall Mount for Makita DC18RC Battery Charger

Wall mount for Makita DC18RC battery charger. Requires no modifications to the charger, i.e no need to remove rubber feet, or any screws. Printed in PETG for a little flex and resilience, but PLA/ABS, etc should be fine.

Downloads
654
Likes
129
Rating
5
P
PrintablesPaŠe

MAKITA Charger DC18RC Wall holder

Wall mount of MAKITA batteries charger

Downloads
644
Likes
85
Rating
4.71
P
PrintablesStudio Robbe

Makita DC18RD wall mount

remixed wall mount to fit Makita DC18RD Replaced plastic screws(original) by 4x50 wood screws Printed in PETG

Downloads
400
Likes
34
Rating
5
P
PrintablesSami

Cup holder for MB C180 W204 Year 2013.

Cup holder for MB C180 W204. Cup holder for MB C180 2013 "W204" 2013 model. Most probably works for other year models as well. My son asked for a Cup holder for C-180 W204 2013 . Works with booster can (with bushing for 59mm cans and…

Downloads
389
Likes
15
Rating
0
P
PrintablesJoseph Quigley

Multiboard Mount for Makita battery charger DC18RC

Printed on its side for strength, this Makita DC18RC battery charger slides into the mount with a solid clunk. The original model did leave some excess tolerances, causing the charger to lift a few millimeters when removing the battery. I…

Downloads
350
Likes
37
Rating
5
P
Printablespoprhythm

Makita Battery Charger DC18SD Mount - Pegboard and Wall

The DC18SD is slightly smaller than the DC18RC, so this adaptation will fit this model. Insert the top peg at an angle first, and then push in the bottom two support pegs. You may want to add a screw into the pegboard for extra support.…

Downloads
323
Likes
35
Rating
4.75
P
PrintablesJXC

Makita DC18SD Wall Mount

Flush mounting for Makita DC18SD charger. One of the sides has pin holes that are not straight up and down, so I decided to cant the screwholes relative to the mount, so you end up with the smallest possible mount, but also have vertical…

Downloads
320
Likes
38
Rating
0
P
PrintablesAneoPsy

French Cleat - Makita Charger DC18RC Support

French Cleat - Makita Charger DC18RC Support A French Cleat Support for the Makita Charger DC18RC Designed to fit a plywood French cleat size: ¾" ~ 18mm BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support…

Downloads
297
Likes
50
Rating
5
P
PrintablesJackTheBlack24

Skadis Makita DC18RC 18V Charger Holder

A really sturdy Skädis mount for your DC18RC charger. STEP and F3Z files are attached if anyone wants to play with the design, minimise it, enforce it or anything really. I find the current design stable and sturdy without any wiggle room…

Downloads
269
Likes
35
Rating
5
P
Printableskerngebiet

Makita DC18RC Charger Stand or Mount

These stands for Makita DC18RC battery chargers has a much higher angle as others around. I use them as stand, but they can also be used as wall-mount. Also, they can be used normally or upside-down. When used as a stand, there is enough…

Downloads
241
Likes
25
Rating
5
P
PrintablesRoonster

Makita DC18RA Battery Charger French Cleat Holder

I love the Makita DC18RA Battery Charger Mount from Casper but I needed a French cleat Version. So I made a remix.

Downloads
202
Likes
41
Rating
4.5
P
PrintablesJXC

Makita DC18RC

DC18RC charger mount

Downloads
192
Likes
21
Rating
0
P
Printablespoprhythm

Makita DC18RD Battery Charger Wall Control mount - Version 2

This uses the DDD Printable Wall Control System ( github ) creating an angled mount for the Makita DC18RD Battery Charger . 2024/6/22: Update - Version 2. Angle and mounting have been improved - it no longer requires a strap to keep it in…

Downloads
179
Likes
35
Rating
4.5
P
Printablesstef

Skadis Holder for Makita Charger DC18RD

Based on TJDesign's great models, I have created another version for the Makita double battery charger DC18RD. Left and right holder can be fixed by using slightly longer screws (remove rubber mounts to access screws. I have adjusted the…

Downloads
178
Likes
20
Rating
5
P
PrintablesJenson

Festool C18 Li Akku-Bohrschrauber Wandhalter oder Deckenhalter /Festool C18 Li cordless drill wall mount or ceiling mount

Ich habe mir hier ein Wandhalter oder Deckenhalter für den Festool C18 Li Akku-Bohrschrauber Konstruiert ------------------- I have constructed a wall mount or ceiling mount for the Festool C18 Li cordless drill

Downloads
171
Likes
27
Rating
5
P
PrintablesAnimetronix

Android C18 figurine

A highly detailed collectible figurine featuring Android 18, the beautiful and deadly cyborg from the legendary anime series Dragon Ball Z . The model depicts her in a confident, alluring pose, sitting effortlessly atop a piece of…

Downloads
169
Likes
22
Rating
0
P
PrintablesKampfgeist_007

Halterung Makita Ladegerät DC18RD

Halterung, welche das Ladegerät wirklich sicher an der Wand hält. Mir waren die schon verfügbaren Halterungen nicht fest genug, deshalb habe ich eine eigene Halterung entworfen. Diese arbeitet nach dem Prinzip eines Dübels und hält somit…

Downloads
164
Likes
12
Rating
0
P
PrintablesYTSIO

Makita wall mount for charger DC18SF

We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workspace tidy with Makita wall mount for charger DC18SF. I print them with PETG; 6 wall; 6 top/bottom; 25% Gyroid…

Downloads
157
Likes
15
Rating
0

Skadis T-Nut Mount for Makita DC18SD

This model does not fit DC18RC Pull out rubber feet from the bottom of the charger and mount brackets into holes. To mount brackets you'll need both T-Nuts and alignment guides, which you can find here:…

Downloads
149
Likes
23
Rating
5
P
PrintablesR B

Makita DC18SD wall mount

Makita charger DC18SD wall mount.

Downloads
149
Likes
9
Rating
5
P
Printablessamywamy10

Ryobi One+ IntelliPort Battery Charger (RC18115) Skadis Holder

An Ikea Skadis mount for the Ryobi One+ IntelliPort Battery Charger (RC18115)

Downloads
149
Likes
23
Rating
5
P
Printablesfox8200

Wandhalterung für Ladegerät Markita DC18RC

Passend zu den erstellten Wandhalterungen eine Erweiterung für das Ladegerät DC18RC von Markita. Die Gummipuffer und die dahinterliegenden Schrauben wurden entfernt und durch Blechschrauben 4,5x40mm für die Montage ersetzt. Hierzu ist…

Downloads
140
Likes
9
Rating
0

Makita charger DC18SH wall mount simpel

Makita charger DC18SH wall mount simpel is a wall mount for your charger. Remove rubber feet, and push the hoder i place. You kan just let it hang or remove the skrew and put a new through the mount. Its pre-drilled. Print Settings…

Downloads
131
Likes
8
Rating
5
P
PrintablesNiklas Roll

Makita DC18RC wallmount

Using M4 thread inserts

Downloads
131
Likes
20
Rating
0
P
PrintablesRasmus

Makita charger mount for DC18SD charger

Holder for Makita DC18SD charger. mounts with 4 screws. the charger can be taken on and off without tools.

Downloads
124
Likes
10
Rating
5
P
PrintablesA4O Labs

IKEA Skådis Makita DC18RA 18v Battery Charger Mount

Makita DC18RA 18v Battery Charger Mount for IKEA SKÅDIS System This is a Makita DC18RA 18v Battery Charger Mount that attaches to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178 . (See their collection of T-Nut mounted parts…

Downloads
123
Likes
18
Rating
0
P
PrintablesJSkold

Makita DC18RC openGrid Multiconnect Mount

I was missing mounting options for my Makita DC18RC charger using openGrid . So, I took inspiration from existing wall mounts and designed these brackets, which work with openGrid using Multiconnect. This mount uses 7x5 openGrid tiles and…

Downloads
122
Likes
35
Rating
5
P
PrintablesD4rk Helmet

Makita DC18SD mountingbracket

Small brackets to mount a Makita DC18SD charger to a wall. Do this one by one for each mountingbracket remove the rubber You need to remove the original case screws put the bracket replace the original screw with a 4mm x 50mm countersunk…

Downloads
104
Likes
13
Rating
0
P
PrintablesMrlko
Downloads
100
Likes
10
Rating
5

Makita Battery Charger (DC18RC) Wall Mounting Bracket

Description This bracket allows you to mount a Makita 18v battery charger (DC18RC) on the wall to get it off the shelf/workbench. It includes cutouts to allow air to get to the vent on the back of the charger and circulate under the…

Downloads
98
Likes
12
Rating
0
P

Charger Mount Hikoki/ Hitachi UC18YFSL

Wallmount/ under desk mount for Hikoki/ Hitachi Charger UC 18 YSFL Print Settings Rafts: No Supports: No Resolution: 0.3 Infill: 30 Notes: tight fit PLA works fine, use PETG or similar for more robustness Category: Tool Holders & Boxes

Downloads
98
Likes
11
Rating
0
P
Printablesaasbakk

Makita DC18RC Charger Skadis Mount

Bracket for Makita Charger DC18RC for mounting on IKEA Skadis pegboard (Might fit other charger models also) Use the original Makita charger rubber grommets on the bracket. These will hold the charger in place, but you may also detach it…

Downloads
93
Likes
10
Rating
4
P
Printablesrmblr

Makita DC18RC - Skadis mount (re-upload from LemonAmnesia @ thingiverse)

I printed these vertically with supports (grid) so that it is stronger. The first time I printed it laying flat, but the round nubs broke off very easily. In addition to this you need the std_base_hook_mini.stl from @TJDesign.

Downloads
92
Likes
7
Rating
0
P
PrintablesMenga

Wallmount for Makita DC18SD Charger

Print on the side. Support for the pins are a must, for the holes it isn't necessary. The holes for the anchor screws are 3.7mm, meant for 6mm Fischer wall plugs (Drywall or brick)

Downloads
91
Likes
2
Rating
5
P
PrintablesCharly BEGOOD

Behringer UMC18-20 knob

Now you can print your own colorised knob for UMC18-20

Downloads
91
Likes
12
Rating
0
P
Printablesdnoinengland

Makita DC18RC Charger wall mount

Best print with PETG: stronger and temperature resistant compared to PLA. Print vertically as shown on image, supports needed. I used to have this model, but after some time charger started to fall out, so introduced "full encasement"…

Downloads
89
Likes
23
Rating
0
P
PrintablesJXC

Makita DC18RD Wall Mount V2

I had a few complaints that the chargers could come apart from the wall, shearing on 3D printed pins. The update model is slightly thicker, but most importantly now uses a screw to hold the Battery charger casing to the charger. You'll…

Downloads
85
Likes
4
Rating
5
P
PrintablesMarián

Objímka pro uchycení tlačítek BAFANG DPC18

Objímka pro Tlačítka pro display C18 od Bafang. Verze “darovaný vzor” je se souhlasem majitele přidán a sloužil jako inspirace pro můj model. V2-zvetšen otvor na řídítka Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No…

Downloads
81
Likes
5
Rating
0
P
PrintablesPrimary Key

Hitachi Battery Charger UC18YFSL Wall Mount

Design inspired by similar wall mount for Makita . Consists of two not equal elements. Right a bit more complicated. Both printed on side with no supports. I used 3 walls and 20% infill. Once you put both sides mark and predrill bottom…

Downloads
79
Likes
11
Rating
5
P
PrintablesMarián

switch +- bafang display c18

Tlačítka pro display C18 od Bafang. Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.1 Infill: 100 Filament: PETG Recommendation:

Downloads
79
Likes
9
Rating
5
P
PrintablesTien Hong Nhan

Hitachi Charger UC18YRSL Wall Mount Adapter

Wall Mount Adapter for Hitachi Charger UC18YRSL

Downloads
79
Likes
2
Rating
0
P
Printableshgznr

Makita DC18RC Wall Mount drill guide

A drill guide for installing the Makita Battery Charger DC18RC wall mount . I made this from quick measurements of the wall mount while attached to the charger. For me it turned out a bit of a tight fit for the lower studs, so please…

Downloads
78
Likes
10
Rating
5
P
PrintablesLannix Design

Makita Battery Charger Mounts (DC18SD & DC18RC)

Wall mount brackets for the Makita single battery slow charger [DC18SD] and the quick charger [DC18RC]. Each mount is in two parts and there is a slight difference between the slow and quick chargers. Each mount needs five wood screws to…

Downloads
70
Likes
4
Rating
0
P
PrintablesYuri Makassiouk

Ryobi Charger (RC18115) Wall Mount Cradle Remix for Multiboard

Attaches the RC18115 to Multiboard with 4 screws (You will need 4 - actually 2 might hold just fine - of those: https://thangs.com/designer/Multiboard/3d-model/13%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-974236). I printed it…

Downloads
69
Likes
8
Rating
0
P
PrintablesHamillES
Downloads
65
Likes
15
Rating
0
P
PrintablesD!nu

Case with stativ for DIY clock DS1302 (EC1838B)

Together with my kid we made this case for his DIY clock (soldering project). The clock we have is from here: https://www.roboter-bausatz.de/p/bausatz-rotation-led-uhr-ds1302. Additionally, it requires: 5x M3 brass inserts 4x M3 6mm SHCS…

Downloads
65
Likes
11
Rating
0
P
PrintablesSpicy3d

Sofirn SC18 Diffuser

You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…

Downloads
63
Likes
5
Rating
4
P
PrintablesHonza Vepřek

18mm sensor mount for Prusa MK3s extruder (eg. LJC18A3-H-Z/BX)

Despite capacitive sensor is probably not the best idea for MK3s extruder due to weight and lower precision, my personal experiences are good. Mine is LJC18A3-H-Z/BX. I like it as sensor do not touches bed (unlike bltouch) and will…

Downloads
63
Likes
3
Rating
0
P
PrintablesThinkspace

Android C18 - Dragon Ball figure

Print Settings: Material: PLA silk (copper) Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI…

Downloads
58
Likes
8
Rating
0
P
PrintablesSgtBean

Hikoki / Metabo C18DBAL osVac dust port

Modified version of Metabo / Hikoki C18DBAL circular saw dust port by Sekellus1 to allow use with the osVAC system. Printed with Bambu P1P in PLA. Perimeters: 3 Layer height: 0.2mm Supports: only needed on buildplate to support mounting…

Downloads
56
Likes
7
Rating
0
P
Printablesmaot1985

BOSCH Adapter AdvancedVac18V-8 <> Makita RT0700 Katsu Baseplate with dust collector

Der Adapter passt an eine Baseplate mit Absaugstutzen von tobbegraf ( Thingiverse ). Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.

Downloads
56
Likes
12
Rating
0
P
PrintablesDongaz

Makita DC18RC Single Port Rapid Charger wall mount

One stop shop for a wall mount for the DC18RC charger. Standoff is 12mm long(8.2mm diameter instead of 8.1mm from original) with a 3mm base to tie them all together. Has a 4.5mm through hole for 8G screws and a 1.5mm chamfer hole. The…

Downloads
55
Likes
8
Rating
0
P
Printablesboddys

Makita DC18SD Charger Mount

I am not sure if Makita changed the design on these DC18SD chargers but when I was looking for a mount, the hole layout that people had used did account for the offset of the top pin, so I designed my own. I can confirm that this does NOT…

Downloads
55
Likes
6
Rating
0
P
PrintablesRybaMike

Bafang DP C18 display (UART / CAN) for BBS/ M620/ M400 Top tube mount

Move the Bafang display from handlebars to top for a cleaner look and protection in crashes. Also enables the use of handlebar mounted headlights. Designed for a 32.5 mm top tube, i've encluded the model so you can adjust to your diameter…

Downloads
53
Likes
6
Rating
0
P
Printablesarminth

How to attach a LJC18A3-H-Z/BX capacitive probe via optocoupler to Creality Ender 3 (and other printers)

This is a quick description on mounting the LJC18A3-H-Z/BX on an Ender 3 as an alternative to ready made kits available on the market. You need some soldering skills and a bit of electro-technical knowledge. If you don't know what you are…

Downloads
52
Likes
3
Rating
5
P
Printablesabiabio

hc18 main sheeet halyard pulley

26/09/23 UPDATE -just added the 3mf file that was missing

Downloads
51
Likes
10
Rating
0
P
PrintablesHobb3s

Team Associated RC18B2 Steering Rack

I once again broke the steering rack on my rc18b2 buggy, same part always seems to break. I've looked for alternatives, but there only appears to be an aluminum one that goes for 50+ dollars. Needless to say I didn't want to wait the few…

Downloads
49
Likes
6
Rating
0
P
Printablesmaot1985

BOSCH Adapter AdvancedVac18V-8 <> UniversalCirc18V-53

Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.

Downloads
49
Likes
8
Rating
5
P
Printablesmaot1985

BOSCH Adapter AdvancedVac18V-8 <> AdvancedOrbit18

Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.

Downloads
48
Likes
4
Rating
0
P
PrintablesDesignWeaver

My Robotic Pet Coding Chameleon C18 Front Upper Leg Part

This is a variant model of the C9 leg part which looks similar. However, C18 is straight and goes with the front legs while C9 is bent and goes with the rear legs. The other model is here:…

Downloads
45
Likes
0
Rating
0
P
Printablesmichael

Mercedes C180 2011 armrest divider

this is a divider for the original storage in the armrest. to divide the storage compartment en can holder. made for a Mercedes C180 from 2011 w204. Gcode is for printing with 0.15mm layer hight PETG. Print time 1:23 with prusa mk 2.5s i…

Downloads
45
Likes
5
Rating
0
P
Printablesthebigkz

Ryobi RC18120 Skadis Hook Mount

Ryobi RC18120 charger mount with integrated hooks for Skadis boards, emphasizing strength and functionality. Printed in PETG on its side for hook durability, though this necessitates support use, affecting finish quality. Print…

Downloads
45
Likes
8
Rating
0
P
PrintablesShenaniganz

LTC1871 DC-DC Booster Converter Case

I wanted a case for this boost converter: https://a.co/d/hFepbhh Didn't find one, so I made one. Very simple, <30 minute print on Bambu X1C printed in PLA. I used 0.2mm layer height, 10% gyroid infill, 2 walls; but I'm sure any normal…

Downloads
44
Likes
1
Rating
0
P
Printablesichiban

Makita DC18RC Benchtop Screw-down Feet

There's a lot of DC18RC mounts out there. Here's another. No screwing into the charger itself. These feet need to be printed in TPU. Ya pop out the original feet, jam these in, and screw the little “ears” down with #8 screws! The charger…

Downloads
43
Likes
1
Rating
0
P
Printablesschluppy

Wandhalterung - Makita DC18RC v4

Die Gummifüße des Ladegeräts können einfach entfernt werden. Die vier Schrauben, die unter den Gummifüßen zum Vorschein kommen, müssen entfernt werden. Die Schrauben werden gegen M4 30 mm Senkkopfschrauben ersetzt. Damit sich nichts…

Downloads
43
Likes
8
Rating
0
P
Printableshämppis

Wall Mount for Makita DC18RC Charger

Wall Mount for Makita DC18RC Charger A three-part wall mount for the Makita DC18RC charger. Printing Print the parts in the orientation provided in the STL files. Supports are recommended for the holes. The parts in the photos were…

Downloads
43
Likes
9
Rating
0
P
Printablesc4vl3r

Protector for RC18G lens on DJI FPV Camera

I installed an Runcam RC18G lens as a replacement for the original DJI/Caddx lens on the DJI FPV camera. This is a simple protector for it. Snug fit, and not visible in the image. Print Settings Supports: No Resolution: 0.2 Filament: Any…

Downloads
42
Likes
1
Rating
0
P
Printablesmaot1985

BOSCH Adapter AdvancedVac18V-8 <> PSM18Li

Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.

Downloads
40
Likes
5
Rating
0
P
PrintablesPhamaral

Bafang DPC18 Garmin mount

A mount with the garmin connector for the Bafang DPC18 display Needs supports and I recommend printing with brim. Print it upright, like in the picture.

Downloads
39
Likes
2
Rating
0
P
Printables3D Shuttle

Makitaakkuhalter DC18SE

Doppelakkuhalter für die Ladestation DC18SE

Downloads
38
Likes
10
Rating
0
P
PrintablesSteven La

Bento Box V2 - boost converter base & duct (LTC1871)

An addon base to fit a boost converter to power the fans in a BentoBox. Has slots for a power switch and a barrel jack. Supports 4x2mm magnets, like on the original BentoBox. This was made to fit in a Bambu Labs P1S using the inner 5V…

Downloads
36
Likes
7
Rating
0
P
PrintablesLaUs3r

Honeycomb Wall Mount for Makita DC18RC Battery Charger

This is a remix of the model created by @blade_512558 who made a perfectly fitting wall mount for the Makita DC18RC battery charger. I wanted to have this for my honeycomb wall, so I added some of the required fasteners Please note:…

Downloads
34
Likes
5
Rating
5
P
PrintablesJRT3D

Gasket Seal - PART ADY11 - for Dyson DC18 & DC25 vacuum cleaners

Why spend $12 on a set of 2 from AMAZON LINK : https://amzn.to/4hey1bJ #ad …when you just need 1 and can 3Dprint it from TPU for a fraction of the cost and less than 2 hours in time. This is a brand new foam seal gasket for the cyclone on…

Downloads
33
Likes
3
Rating
5
P
Printableskenfuhr

Makita charger DC18SH French cleat

French cleat mount for Makita charger DC18SH

Downloads
32
Likes
2
Rating
0
P
Printablesmikkosm

Ryobi Charger (RC18120) Inverted Wall Mount

I found it inconvenient that the charger cord came from the top and the charging lights were on the bottom making them hard to see when mounted on a wall in the default orientation. This minimalistic adapter plate will invert the charger…

Downloads
31
Likes
5
Rating
0
P
PrintablesDrVoidberg

Makita DC18RD wall mount

Available options were requiring additional screws, modification of the charger or relying on a friction fit, which I didn't like. So I made a wall bracket that fixes it in place without modifications. Attach bottom brackets first, then…

Downloads
29
Likes
3
Rating
0
P
PrintablesB1bisbugeau

GBC180 torpedo

Print part 1, cab +Z oriented Print part 2 at same direction to avoid support

Downloads
27
Likes
3
Rating
0
P
PrintablesRams

[3d scan] Festool OSC18

A 3d scan of the tool itself so you can make parts yourself. Scanned with a Revopoint MetroX.

Downloads
26
Likes
6
Rating
0
P
PrintablesSpace Doggo

DP-C18 Headset Mount

This is the first model I have uploaded to printables! I highly recommend printing in ABS or PETG. Pla does not fare well in the heat or sun. It does not need supports but there are some very small bridging parts that any FDM printer…

Downloads
24
Likes
1
Rating
0
P
PrintablesPrintIn3D

BOSCH Universal VAC18 wall mount

After I kept getting annoyed that the vacuum cleaner was always in the way in the cupboard and took up a lot of space, I quickly designed and printed a wall bracket. Now it hangs on the inside wall of the cupboard and has a fixed place.…

Downloads
23
Likes
2
Rating
0
P
PrintablesBarto

Ryobi 18V Dual Port Charger RC18240 holder (Multiboard / Multiconnect)

Multiboard holder for the Ryobi 18V One+ Dual Port Charger RC18240. Premade holes for the mounting screws are 114mm apart - see back of charger. This holder uses Multiconnect connectors. You will need 2 M4 8-10mm machine screws - they…

Downloads
23
Likes
6
Rating
0
P
PrintablesLukaP

Makita DC18SH Charger SKADIS mount

IKEA SKADIS mount for the Makita 18V LXT dual battery charger. Heavily inspired by stef's model for the DC18RD charger with adjusted dimensions. To assemble, print both pieces + 4 hooks. Remove the 4 corner pads on the charger and unscrew…

Downloads
22
Likes
2
Rating
0
P
PrintablesRams

[3d scan] Festool BHC18

2014 model. Scanned with Revopoint MetroX

Downloads
21
Likes
4
Rating
0
P
PrintablesRams

[3d scan] Festool AGC18

Scanned with Revopoint MetroX

Downloads
21
Likes
3
Rating
0
P
PrintablesRomechdel

Capacitive Sensor bracket (LJC18A3-H-Z/BX)

original design: https://www.thingiverse.com/thing:1536016 Modified with m3 hex nut holes and modified the back plate to fit my prusa i3. Print Settings Printer: Prusa i3 boxframe Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 20%…

Downloads
19
Likes
1
Rating
0
P
PrintablesYucev

Makita DC18WC Charger Holder - openGrid and Multiconnect

Printed with KiwiFil rPLA Pro. The pegs are a snug fit into the bottom of the charger. Print 2x and they should fit within 5 by 4 (3.5) openGrid squares. Print settings: 0.2mm layer height 4 wall loops 30% infill

Downloads
19
Likes
1
Rating
0
P
PrintablesMksutov

Makita DC18SD Charger Honeycomb Storage Wall Screw Mount

I did not get lazy, I swear, the top-right mount is supposed to be 90 degrees rotated, as below. It locks the charger in place, so if you pull your battery out without locking the charger in place with your other hand, the charger won't…

Downloads
19
Likes
4
Rating
0
P
PrintablesLuis_Martins

Swiitol C18 Pro - Simple Legs Riser

I made these simple leg additions for the Swiitol C18 laser engraver but it could work with others too. I used PETG which is what I had but it could be with PLA.

Downloads
18
Likes
3
Rating
0