CC2531 Zigbee Dongle Case Striped
Same as the original model, but instead of the big logo-hole, it has neat ventilation stripes.
- Downloads
- 212
- Likes
- 22
- Rating
- 4.75
116 models
Same as the original model, but instead of the big logo-hole, it has neat ventilation stripes.
Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)
Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…
Print this Model without any supports and with a layer height of .2 mm and 90% infill. You may need to heat up the cap after printing to make it conform better around the USB-A connector so it won't fall off. To close up the enclosure use…
I had to make an connector for @Sembazuru's original model it to connect to our Dyson. My connector broke the other day so I have copied the original but reworked the nozzle to fit our DC25. It may connect to other Dysons of a similar…
A simple, toolless case for the BC250. Who knows how bad the thermals are! Printed in PLA, it's probably fine. The build assumes the center fins of the card have been opened up to accept a fan. BOM BC250 APU Board Flex PSU with…
Presentation This is an ATX mount and its I/O shield for AsRock BC250 board. It fits ATX, micro-ATX and most probably ITX cases. Requires ~31cm length from back to front. 2 variants are available: High-profile variant (22mm high) Active…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
A 3d model of the amd bc250 board, modeled to aid in the design process of a case. Not actually meant to be printed. Including a link to the bc250 community discord https://discord.gg/8eZfFWhczz
ASRock BC250 Complete-ish CAD 3D Model Why Does This Exist? My project required a detailed ASRock BC250 model so I could design custom cooling and enclosure solutions. Every public BC250 model I found was either dimensionally inaccurate…
BC-250 Case modified for LRS-350-12 PSU(and AC-01 Socket), and fan mesh. The difference of v1 and v2. v1 has AC-01 socket on Front Shell. v1.1 update: Improved AC-01 socket fit to Front Shell.(No changes on Rear Shell) v2 has AC-01 socket…
This is a case for BC-250 board-computer, to use it with cheap 12v PSU - from HP server, like HSTNS-PL28 643954-201 (gen6, gen7 - reachable under 10$/10€ in state "like new"/new). It can be 460W, 750W … How to connect this thing to BC250?…
The BC-250 board model features accurate proportions and dimensions. All mounting points precisely match the real board. You don't need to print this model, it's just a sample for body modeling.
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
This is a CPU cooler mount for the BC250 board. It takes AM4/AM5 brackets. There are 7 variants to choose from, depending on the height of the washers that are supplied with your cooler : from 6.5 to the original 9mm, from which I started…
this adapter allows you to mount a bc250 in place of a motherboard in a standard atx case. only certain cases will work for this, however, as the bc250 overhangs the regular motherboard mounting area. parts needed: 4x m3 heat inserts 3x…
UPDATED: v1.3 Added alternative fan sleeve for 3x 120mm fans. Use high pressure ones on the front side. I personally use the default 2 fan version, additional fan is not a big impact, but YMMV. UPDATED: v1.2 Updated front card mounting…
Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250 An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly…
The adapter is printed as four identical parts . Two of them must be mirrored before printing. After assembly, you end up with one adapter per CPU socket corner . Printing Quantity: 4 parts total Mirroring: 2 normal + 2 mirrored Result: 4…
A case for a BC250 board and a full-size ATX PSU. Note - the main image uses an optional fan grille fron Noctua, this is separate from my design but recommended to protect your fans. Link:…
A case for the BC250 board turned living room PC (more info at https://elektricm.github.io/amd-bc250-docs/ ) There were not many options using SFX PSUs and I wanted something that prioritized airflow while keeping the looks nice for the…
Remix from misterT(thanks!). I added a hole in the middle to save time & filament. The angle is about 15°. Original text: Simple speaker stand for the desk. Raises the front of the speaker by about 25 mm. I added some holes on the bottom…
THX TO https://www.thingiverse.com/thing:2950858
Presentation I developped, as a personnal challenge, a portable case for my bc250. This case is equipped with a 16" flat panel, and can output audio via two 2" fullrange speakers. This project drew some attention, and I've been asked…
Adapter for Makita VC2512L vacuum to connect to Festool saws. Has to be printed with support and the Festool side directed to the printbed
Intro When I started with the BC-250 I printed an attractive and compact case that would incorporate a Meanwell LRS-350-12. However, my thermal performance was dreadful and the loud fan of the meanwell was a constant annoyance that was…
Why don't use Olimex ESP32 in ESPHome bluetooth proxy for Home Assistant also as a router? In one case? Grab your spare CC2530, flash router firmware, print the case and connect Vcc and GND to Oli ESP32 PoE board. Insert into case not…
This is a remix based off the work created by the very talented morph91 . This remix project would have not been possible without his incredible original model ! This remix is a large overhaul of almost everything from the original model…
A new Liner for the QC25 when the old one break. No glue needed. Perfectly fit and won't move.
I initially started designing my own 200x200x370mm version of this but then came across 3DCatts SFF Mini ITX Steam Machine Case v2 Airflow and they had nailed the design and was only a few centimetres bigger than the design I was working…
This is an easy printable one-piece case for the CC2531 Zigbee Sniffer Board with external antenna. Print the case standing without support and slide the USB dongle in from the back. It should stay inside just by friction. Let me know, if…
a case for the bc250 mining cards. incomplete. designed to be used with artic p12 slim 15mm fans. max cooler clearance is about 90-100mm. Was to be used with the adapter i made for the bc250 mounting holes to original wraith cooler…
This is the large beater brush gear for a Dyson DC25 vacuum. It may fit other models as well. The factory part is designed to fail because the belt is cogged and there is no other way for it to fail other than burn up the motor. Dyson…
IMPORTANT: enclosure is BETA and recommended for BC250 enthusiasts owning 3D printer, that are able to experiment, test and provide feedback (not to order it blindly for printing in 3rd party service providers, as some flaws may be…
I wanted to use my older bike light on road bike, where there is not much space on handlebars and also bike computer was casting shadow. Light is held in by friction and i recommend to use something better than PLA as light can get quite…
3x bc250 to 120mm fan adapter. print in the orientation the STL file is in. model requires that it is printed with supports recommended to print with ABS or at the minimum PETG. if printed in other materials, damage to hardware may occur…
A simple clip/holder for the micro-fit 3.0 power connectors on the bc250. First time 3d modeling or posting here so it's not the best but it works. I'm fairly sure no one else has made this, so here's a simple clip/holder for the microfit…
Housing for BC250 with FullATX PSU. A1 mini friendly (179.5x179.5 mm footprint). I used PETG-GF filament. There is no hole for power button in the STEP file, I drilled after printing. For ATX power to work - I used a mod taken from BC250…
Remixed for devices with external aerial Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: ANy PLA Black Category: Computer
The liner on my Bose QC25 failed, so I decided to make a replacement. You will need to glue it with to the headphones over-night. I used multi-purpose glue to stick it, you could also use super-glue, but I would be careful cause…
This is a CC2531 cover with HomeAssistant logo, based on the CC2531 Zigbee dongle Case by hansaya Print Settings Printer: Anet A2 - Modified Rafts: No Supports: No Category: Gadgets
Project: Custom ASRock BC-250 ITX Case Design This design is inspired by the BeamCase SFF, a modular ITX case system by BeamCase_Design, and was built from the ground up for the ASRock BC-250 (a PS5 APU-based mining card). While the…
Replacement for Thetford camper WC. I tested on my C250 , should be also compatbile with C260 . The two upper walls are more thick than the original to ensure better strenght. Version history 2024/05/09 - Version 1.0 - First public…
Ideal for a push-pull configuration. I’m using it with a Metalfish ITX A4 frame, together with the infamous ATX adapter. A matching fan cover is also available in the source repository:…
This dongle is based on the previous designs for the dongle. I have made some cosmetic changes to the corners and rounded the edges. Also I have included a mounting bracket so I can mount the dongle independently from my Raspberry pi. You…
Box for a Raspberry Pi 3b+ with an internal SSD drive using a SATA to USB adapter. There's also a slot designed for a Zigbee CC2531 key. 8 X (8mm / 0.8 mm) magnets Printed on an Ender 3 with PLA at 0.4mm. DIY :…
Replacement part for Dyson DC25 - Power Cord Hook/Holder/Wrap/Toggle/etc Based as closely on what is left of my broken part as possible; the height of the hook is a total guess as I don't have an original to measure. edited 2022 11 18:…
A case for the Aideepen Zigbee CC2531 Sniffer USB stick, it might fit other models as well. With button access.
Two adapters to connect the industrial vacuum cleaner to the cyclone separator. Adapter A is for The original Makita hose to the Cyclone separator and Adapter B to connect the Dewalt hose to the vacuum cleaner. Print instructions Printed…
A 3-pieces kit to properly mount your BC250 into a DeepCool CH160 Plus PSU relocated to the bottom of the case 120mm or 140mm fan installed right in front of the BC250, pushing fresh air directly to the VRM and PSU connectors Active VRAM…
Just a holster for the EDC25 flashlight. As far as I know, there is nothing like this so now there is I should get around to printing it soon… Please check out my other models.
A simple air guide to add a blower fan (such as https://www.aliexpress.com/item/1005008518551439.html?spm=a2g0o.order_list.order_list_main.15.46a21802UmPbic ) to a BC250 and designed to fit inside this case
Not much to say about this, thei are replacement spacers for the back of the board on the BC250, they help to increase pressure on the heatsink, I made them 1 mm thick to increase pressure, going up from 0.5mm, they can be scaled up or…
Simple remix from : https://www.printables.com/fr/model/47038-cc2531-zigbee-dongle-case-striped Instruction : Logo/image Print Settings : Resolution: 0.2 mm first-layer-height : 0.2 mm skirt : no expert mode/advanced → extrusion width →…
Simple Case for Wireless USB Zigbee CC2531 Module
ASRock BC250 Crossflow Steam Machine Case Why Does This Exist? I designed this case for my own BC250 Steam Machine build and to fit in the space behind my Hisense U6N television. Many existing BC250 cases point a large fan at the board…
This is a case for this Router: https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html For the great zigbee2mqtt Project. I designed the Print without screws needed everything snaps together and is printed on an Original…
Remixed AM5 mount for BC250 by Gadget (made it 6mm tall instead of 7) for compatibility with ARCTIC Liquid Freezer III Pro. Everything from their description applies, so I pasted it below. "This is a CPU cooler mount for the BC250 board.…
KR2201B switch with one button remote for VC2512L shop-vac. Affiliate link for the remote switch: https://s.click.aliexpress.com/e/_9QvVoG SketchUp files for supporters on Patreon: https://www.patreon.com/posts/next-level-shop-48040322…
Got this idea from Simmelbach (Arduino Chip Reset Ricoh SP213w Toner - Dupont Connector Holder). His holder seemed sort of small and potentially awkward. Also I didn't know if the Dupont connector would maintain enough pressure for good…
A small plastic based frame to hold the BC250, PSU, and Power Button in one place. It is not a perfect design and could use some tweaks but works as is and meant to sit in place without being moved much. The BC250 rail should slide in to…
🇩🇪 Der Griff für die C250/260 Kassette. Leider geht der Orginale Bauartbedingt öffter kaput. 🇬🇧 The handle for the C250/260 cassette. Unfortunately, the original one breaks down more often due to its design.
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
So... you built a cyclone for your Makita VC2512L and don't know how to store the whole thing now? This is a solution ;-) The tube clamp is a modified version of ErSedavi's 32mm thing. I just changed its XY size to fit the tube. Kudos to…
Zigbee communication interface - USB pcb cover
Case for zigbee router on universal PCB with HLK-PM03. https://www.zigbee2mqtt.io/advanced/zigbee/05_create_a_cc2530_router.html
Why spend $12 on a set of 2 from AMAZON LINK : https://amzn.to/4hey1bJ #ad …when you just need 1 and can 3Dprint it from TPU for a fraction of the cost and less than 2 hours in time. This is a brand new foam seal gasket for the cyclone on…
Brush gear cog thingy for a Dyson DC25 vacuum cleaner - see photos... print solid spare part The original one broke in my vacuum cleaner but this should work fine…
Inspired by this thing and the creator's invitation to design a better bottom lid, I decided to create a snap-together housing for a Zigbee router using a CC2530 + CC2591 + HLK-PM03 as described here . This version houses the CC2530 +…
I printed it in PLA+ Using an 0.4 Nozzle
Simple hanger for Deerma VC25 Cordless Vacuum Cleaner + slot for extra bristle brush attachment. Slot is intentionally 4mm wider and deeper than vacuum itself for easier inserting / removing it from holder. I mounted mine with VHB Tape,…
Codename GabeStation3 This is my take on a small-ish case that allows for good cooling of the BC250. The dimensions are approx 325x113x186mm, which means it's a hair under 7L in volume. EDIT: I just realized I didn't make a back case to…
Dimension model that shows die location and mounting holes
LNC25-01 Lancelot for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
ASRock BC250 Quad Mounting System for 10" Rack This is a complete mounting system designed to install four ASRock BC250 mining boards inside a 10-inch rack . Important: A standard 10" rack is not deep enough to accommodate BC250 boards…
Couch to 5K Medals #C25K Print this for family and friends to help celebrate them finishing C25K. A few different variations, Boy/girl runners, Key ring loop or ribbon loop, and bonus 2021 versions. Print Settings Printer Brand:…
An AT24C256 I2C EEPROM Memory Module mount for 2020 extrusions. I am using this for a BTT SKR 1.4 board on my custom built delta printer. This lightly clamps the EEPROM module and has open sides for airflow, although I don't know if these…
Like the original model, but without hole for the external antenna.
ZTE PWR-AC250 4010 风扇( 12v 0.1A) DC-099 (5.5x2.5)母座 四个 rm065 200 欧可调电阻 M3*6 沉头螺丝 四个 ZTE PWR-AC250 4010 fan (12v 0.1A) DC-099 5.5x2.5mm (4pcs) Rm065 200 Ohm M3 * 6 Countersunk Head Screw (4pcs)
Adapted the USB hole for a better fitting, dimension reduced to make it compact. Is adapted for my board antenna plug, maybe you have to make some adjustments due the antennas are not soldered equal. A remix…
Case for a CC2538-CC2592 development board module. These are Zigbee modules which I use to control my lights, thermostats and other stuff. They offer great range and can be found on Aliexpress for 20-30 dollars. I printed this without any…
I designed a case for my zigbee 3.0 USB stick which I soldered myself with an popular PCB from ebay. The PCB fits tight (just sand the PCB a little bit if it is to tight). It has a Zigbee logo on its top which you can print in colors easy…
I wanted to use more quiet fans for my Asrock 4U12G case where I have my 12 BC250 computers in. To install this mod you'll first have to drill the 14 metal plugs holding the front panel to the case and remove it. Easiest way to essamble…
I had to cut off the backplate and add more screwholes because my build area is only 200mm tall. the models back half is 203mm tall. I am printing this right now, i will have the build done and be able to talk about any issues I have. I…
Introduction This is not another case : it's a test bench for the BC250 Top mounted board, secured using 3/4 M3 screws Full-size ATX PSU or Flex-ATX PSU (other variant such as SFX or TFX are possible as well) Front 92mm fan to keep the…
This is a remix to fit the longer debug pin version. Not the finest work on the inside but got the job done. I've made the holes in the case slightly smaller than 3mm so you can screw in M3 to fix the parts together. No-text version has…
Einfacher Adapterring zum Einkleben für das Loch links unterhalb vom Lenker für ein USB Ladegerät. Ich habe ihn mit Dichtungssilikon eingeklebt. Hält super, passt super.
⚠ Status: design-complete prototype, not yet fully printed. Geometry validated with PLA test pieces (tube-bend jig, PSU pattern plate, joint samples); the full case has not been printed and assembled yet. Publishing now to gather…
A McIntosh MC250 shaped keychain, about 5000 times lighter than the original amplifier. No supports needed, print the black parts (transformer, transistors cage and autoformers) in black, the “chrome” base part in shiny grey and glue them.
⚠ Status: design-complete prototype, not yet fully printed. The geometry has been validated with PLA test pieces (tube-bend jig, PSU screw pattern, joint samples) but the full case has not been printed and assembled yet. I'm publishing it…
Unlike all other cases I could find, this one protects the USB and SMA connectors. Needed "vitamins" are two M3 heatset inserts and two M3x20 countersunk screws. Print Settings Printer brand: Creality Printer: Ender 3 V3 SE Rafts: No…
I'm thinking – maybe I should revisit the idea of using a blower fan, but mounted differently? eg. something like Delta BFB1212HH-5M2P (12v, 4pin PWM like classic cpu fan) A single blower fan, blowing through the entire heatsink, makes…
Box for Asrock BC250 + Mean Well LRS-350-12
A Case for the AMD BC250 that fits a fullsize non-modular PSU I used PETG for the Body and TPU for the feet altough you dont really need the feet I made it because i didnt like the other Options available I used M3 Heat inserts (4mm…
This is a 3D printable label frame designed for the control panel of the Konica Minolta Bizhub C258 multifunction printer. It helps users clearly identify the most used buttons – "PRINT" , "SCAN" , "COPY" , and the numeric keypad – by…
Printed inserts to be used with 2" Bullbar brackets. Printed with PETG 75% infill. I take no responsibility for loss or damage of property or harm to anyone.
Handy hook that attaches to the bar and allows carrying the chainsaw on the bagpack/belt – pretty well secured. I use it together with my bike bagpack when exploring and cleaning local trails. The hook is at the center of gravity and the…