Search results: cc1

Sort order

124 models

Centauri Carbon 1 - CC1 TOP COVER 172MM TALL V1

I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…

Downloads
2,110
Likes
403
Rating
4.83
P
PrintablesTom Hoeppner

Riser for Elegoo Centauri Carbon (ECC1) with Canvas

EDIT - UPDATE 15 August 2026 Based on some feedback, I've replaced the 3MF file with one that contains better plate labels and support blockers / enforcers. The original 3MF file has been removed to avoid confusion. There is a solid…

Downloads
1,215
Likes
280
Rating
4.92
P
Printablesanno1996

ESP32 with CC1101 Case

Case for ESP32 Board (NodeMCU V2, Attention: only for the one with Mounting Holes!) and CC1101 Transceiver. Toolless assembly.

Downloads
644
Likes
26
Rating
5
P
PrintablesSpam N' Rice

Elegoo Centauri Carbon Canvas Shroud/Lower Mount Remix CC1 for Top Cover / Riser

@PrintedRawDs_4927914 Centauri Carbon 1 and 2 lowered top cover/riser remix. I like his design since it lowers the canvas to make the height of the top hat/cover/riser much lower. Also the acrylic is very affordable and easy to get. Total…

Downloads
591
Likes
115
Rating
4.86
P
Printablesdansh

LilyGo T-Embed CC1101 back shell with external antennas and power switch

By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…

Downloads
541
Likes
43
Rating
5
P
Printablesclogged_nozzl3

Proxima toolhead cover for Elegoo Centauri series using 5015 fan (CC, CC1 Canvas, CC2)

This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…

Downloads
471
Likes
135
Rating
4.63
P
Printablesf4r0kh

Flipper Zero CC1101 SubGhz External SubGhz Module CASE

I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…

Downloads
458
Likes
36
Rating
4.75
P
PrintablesDaGov

Flipper Zero CC1101 external module cover

It needs to be printed on SLA resin printer. FDM not tested.

Downloads
422
Likes
75
Rating
5
P
Printablesdanoman

ESP32 + CC1101 Case (USB-C Devkit)

This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm. This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used…

Downloads
371
Likes
19
Rating
0
P
Printableso.bostik

Clarinet/Flute Microphone Clip for T.bone Ovid CC100 or DPA 4099

Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.

Downloads
270
Likes
18
Rating
5
P
PrintablesPigeon

LilyGo T-Embed CC1101 Body SMA

A LilyGo T-Embed CC1101 Body with dual SMA antenna holes. This is the stock body part and is not optimised for FDM., so it will require well-tuned support setting.

Downloads
259
Likes
25
Rating
0
P
PrintablesMyte

Flipper Zero External Sub-GHz CC1101 Module Case

https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/

Downloads
237
Likes
30
Rating
0
P
PrintablesMU74NT

CC1 Riser and Lowered Canvas

I lowered the canvas and created a riser that puts the height around 670mm including handle similarly to the CC2 Emoji. The top spool brackets are lowered and the rear bracket has a shield to protect the canvas cable when swapping spools.…

Downloads
224
Likes
46
Rating
5
P
PrintablesMcGr3g0r

Raspberry PI Pico / RP2040 cc1101-tool chassis

RP2040 + cc1101 in one chassis. The device is working with cc1101-tool firmware from github my fork: https://github.com/McGr3g0r/cc1101-tool my new tool: https://github.com/McGr3g0r/cc1101-wizzard most recent FW+apk:…

Downloads
222
Likes
25
Rating
5
P
PrintablesCrux3d.com

Elegoo CC1&2 Poop/Waste Bin/Chute (2 Sizes) Compatible with Canvas

Brought this model over from makerworld and made it fit with canvas see link below. THIS IS NOT MY DESIGN. Printables didn't have it so I'm brining it over and making it more clear what fits what. PRINT 1 Bracket & 1 Bin If you have the…

Downloads
214
Likes
14
Rating
5

CC2/CC1 spool mount/adapter for Sunlu S4 filament dryer

updated to better accommodate spools without rubbing. If it imports large, scale it to 10%, I will reupload asap. An adapter so that you can put Elegoo rewind spools from CC2 in the Sunlu S4 drier. Without rewind, color changes will cause…

Downloads
212
Likes
45
Rating
4.5
P
PrintablesTom_FXT

Lilygo T-Embed CC1101 enclosure

Work in progress version. Needs a few tweaks here and there, STEP files are included if you want to make changes. Hardware: M2.5x16 screws (ISO4762/DIN912) - 4pcs M2.5 heat set inserts, 5 or 6mm long - 4pcs M2.5x5mm flat head screws for…

Downloads
197
Likes
27
Rating
0
P
PrintablesHanSoulo

Centauri Carbon CC1 Canvas Lowered Mount Cover Riser Top Hat

This is a 200mm tall version of MU74NT's original design. I cut the ptfe tubes back 70mm and still had issues with the lines trying to push the glass off the top of the original riser. Figured while I was at it, I may as well update this…

Downloads
195
Likes
36
Rating
5
P
Printablesleavic

LilyGo T-Embed CC1101 Power Switch Back Shell

LilyGo T-Embed CC1101 is a cheap alternative for flipper zero,but there is one small issue:there is no power switch for device.Even works in deep sleep mode,the battery drained in two days. So I modified the official shell to add a power…

Downloads
194
Likes
26
Rating
0
P
PrintablesKaktus

LilyGo T-Embed CC1101 back shell with external antennas and power switch 6x3magnets,screws, without magnets

1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…

Downloads
183
Likes
14
Rating
0
P
PrintablesKarl Sanders

Elegoo Centauri Carbon 1 (CC1) Poop Chute Left side with Canvas System

After getting my Canvas upgrade, I could no longer use the original slide because spool 3 blocks the end of the slide. This new slide mounts with the screw under the purge chute and goes to the left away from the spools and uses one of…

Downloads
175
Likes
13
Rating
3
P
PrintablesT3CHKOMMIE

Cases for REK5LAB CC1101 NRF24 and ESP32 Boards

The main board case uses 2 M3 screws. You will need to use a tap and die set to get the threads nice. The CC1101 case uses a single M3 screw. The NRF24 case uses a small blob of super glue to ensure the case stays together. Print in…

Downloads
155
Likes
22
Rating
5
P
Printablesphildesign3d

Elegoo CC1 with CANVAS top hood

Elegoo CC1 with CANVAS top hood Assembled with M3 screws, heat inserts and glue. Adjustable vented top Need 12 M3x4 or M3x6 heat inserts, 12 M3x8 screws Need 2x 168x168 plexiglas for the windows or print 2x the plexi_window part using…

Downloads
152
Likes
32
Rating
0
P
PrintablesMaster Yoda

CC1101 M5Stack Case

This is a CC1101 case to use it with the M5Stack Plus 2.

Downloads
142
Likes
33
Rating
5
P
PrintablesRik M0RKM

CC1101 Flipper Zero Mount

Simply a mounting bracket for the CC1101, the bracket press fits against the dupont connectors and is hot glued into place. It is a evolution of @Oliverkayak mount model.

Downloads
142
Likes
17
Rating
0
P
PrintablesAresROC

Flipper Zero NRF24 Case & Window CC1101

Flipper Zero NRF24 Case & Window CC1101 Remix for NRF24 Antenna Added space for Antenna Space for module pins

Downloads
140
Likes
16
Rating
5
P
Printablesdickie24

Arduino Nano V3 cc1101 case another

Case for usb cul stick adjust it with the scad file Print instructions Category: Electronics

Downloads
140
Likes
13
Rating
5
P
PrintablesAtrica3D

CC1101 Flipper case multicolor text (No mmu)

Just a simple remix.. For people who only has the standard sheet and want something nice aswell ;) I removed the hole for the LED aswell, because i didnt have an intention of using it. I will do more variations on request. I was thinking…

Downloads
127
Likes
13
Rating
0
P
PrintablesMakerMindNexus

NCC1701-Falcon

*Update I did not see that https://www.prusaprinters.org/social/1022-dsk001 Has a model named Millenium Enterprise and do not want to step on toes so I have renamed it the NCC1701-Falcon. So I had a thought and I wanted to see it happen…

Downloads
126
Likes
26
Rating
5
P
PrintablesCody Tolene

Flipper Zero - CC1101 Board by TehRabbitt - Case

A quick case I put together to fit the CC1101 expansion board made by TehRabbitt. The board can be purchased on Tindie here . The board is designed to be used with the Flipper Zero, which can be found here . To assemble the case, you'll…

Downloads
113
Likes
24
Rating
5
P
PrintablesNicolai clausen

I have this cover for LilyGo T-Embed CC1101

here is a cover for LilyGo T-Embed CC1101 that you can choose yourself what color it should be instead of the standard cover that comes with it when you buy it This also saves you from having to destroy the original antenna to retrofit…

Downloads
111
Likes
11
Rating
0
P
Printablesphildesign3d

Elegoo CC1 poops chute for CANVAS users

Elegoo CC1 poops chute and basket for CANVAS users Access from the left of the printer, big poops basket for multicolor printing Need to replace the original screws by 3 M3x8. The problems seen on pictures are allready addressed on the…

Downloads
110
Likes
22
Rating
0
P
PrintablesJiri Heider

1st layer test for ELEGOO CC2 maybe CC1 too

1st layer test for ELEGOO CC2 maybe CC1 too Feel free to test

Downloads
109
Likes
10
Rating
5
P
PrintablesEric Charles

CC1101 Case for Cardputer ADV (M5Stack)

I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…

Downloads
99
Likes
19
Rating
5
P
PrintablesRikard Nilsson

M18 Tool Hanger CC12 mm 4x5mm

This is an remix of the awesome tool holder for Milwaukee M18 provided by GreatOldOne.

Downloads
96
Likes
12
Rating
0
P

CC1101 and D1 Mini Case

Case for the D1 mini clone and CC1101 with "rubber duck" antenna. Based on @RobinsBlog_de design, but I wasnt happy with a few things, such as the weird bottom and the hole on top not made for the rubber duck antenna. Using this to…

Downloads
91
Likes
6
Rating
0
P
PrintablesHejSmart

ESP-32 + CC1101 - water consumption

Płytka ESP32 DevKit: Polecam wersję z portem USB-C dla wygody. Uwaga: Jeśli masz stare układy ESP8266, w tym projekcie ich nie użyjemy – nowa wersja komponentu wymaga ESP32, który jest szybszy i w pełni wspierany. Moduł CC1101 (868 MHz):…

Downloads
84
Likes
5
Rating
0
P
PrintablesMainfoldium

CC1 Canvas Cowl/Shroud remix for Lower Mount Remix CC1 for Top Cover/Riser

Made a remix to make the shroud from @SpamNRice_3402200 compatible with the canvas mount from @EugeneLaw_1166687 so the canvas unit can sit high enough to clear the canvas cable as well as low enough to not have too much interference…

Downloads
83
Likes
4
Rating
0
P
PrintablesJon Ferraez

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)

Update 09/24/2026 : I added 5 x extended shelf variant files, that have the PTFE tubes shelf portion of this current "Rear right corner w/ added inner PTFE tubes shelf" remix model extended out at 5 x more depths, as compared to the 42 mm…

Downloads
82
Likes
21
Rating
5
P
PrintablesChmo

tembed cc1101

крыша tembed Магниты 8Х2 ММ Добавил пару отверстий для выключателя по запросам, если что то не совпадает пишите в коменты Я не тестил крышку с выключателем Если вам не подходит сторона выключателя B просто отзеркальте модель , она…

Downloads
79
Likes
15
Rating
0
P
PrintablesOle

LILYGO T-Embed CC1101 Plus GPS Addon

Full description and BOM on my GitHub: https://github.com/olekrause/t-embed-cc1101-plus-GPS-Addon This project adds an ATGM336H module to the LILYGO T-Embed CC1101 Plus Printing suggestions: - Print in PETG - Auto orient the model -…

Downloads
71
Likes
7
Rating
0
P
Printablesdavidarroyo1234

LilyGo T-Embed CC1101 external antennas and switch 6x3mm magnet

Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets

Downloads
70
Likes
12
Rating
0
P

CC1 with CANVAS SAMLA Hood

This is a simple hood upgrade for the Elegoo Centauri Carbon with the Canvas upgrade installed. It’s a border (frame) that rests on top of the printer, and an IKEA SAMLA 12 gallon box then sits on top of that border. The model is sliced…

Downloads
67
Likes
25
Rating
5
P

cc1101 Flipper Zero Case

A case for a cc1101 sub-GHz signal extender, plain and flipper models. Needs 4 m3x10 and 2 m3x5 bolts

Downloads
65
Likes
13
Rating
0
P
PrintablesEnzo_Steppa

CC1 Canvas riser A4 cutless sheets

For three A4 sheets of plexiglass without cuts (original dimensions 210 x 297 mm) The parts from the original model are used for the right side of this project The mounts for the plexiglass sheets have a thickness of 3 mm, since the…

Downloads
64
Likes
17
Rating
0
P
PrintablesRik M0RKM

Flipper Zero CC1101 Module Cover

Want to turn your Flipper Zero into a Tank? Well all you need is the FlipperHub Sub-GHz Booster module 2.0 and this file. The module in question is to be found on Tindie. The case just slides onto the board and holds the module securely,…

Downloads
64
Likes
10
Rating
0
P
PrintablesCaracalDB

Mini CC1101 Case

Case for CaracalDB Mini CC1101 Add-on board for Flipper Zero

Downloads
63
Likes
2
Rating
0

[OECC1] 12.5x7.5mm Cablechain System Print-in-Place with clips

Cable chain system with 12.5x7.5mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 20mm bend radius. Your printer should be able to print…

Downloads
59
Likes
8
Rating
0
P
PrintablesCody Tolene

Flipper Zero - CC1101 Board by TehRabbitt - Case Pin Boot Cover

This boot cover is made to fit my Flipper Zero - CC1101 Board by TehRabbitt case found at the following locations: https://www.printables.com/model/606834 https://www.thingiverse.com/thing:6122121…

Downloads
55
Likes
16
Rating
0
P
Printablespalmar

ESP32 + CC1101 Case

This case is designed specifically for the 38-pin ESP32 (ESP-WROOM-32 with CP2102 USB-C) development board. If needed, you can easily modify the dimensions to fit a different board. This is a fully parametric model—at least, I hope it is!…

Downloads
51
Likes
2
Rating
0
P
Printablessusmic

Cable management for CC1 / CC2 Canvas | Only 1.4g!

extra cable management cylinders due to the canvas only coming with one, print with your printer's 'fine' preset for more cable clutch power

Downloads
48
Likes
9
Rating
0
P
PrintablesRyuu

LaunchXL-CC1352P / CC2652R Enclosure for Zigbee2MQTT

Remix of the LaunchXL Enclosure by millibyte for the TI LaunchXL CC1352P-2 (longer than original because of PCB-Antenna and SMA-Socket) Changed some details to make it fit M3 Screws from the bottom and added the Zigbee 2 MQTT Logo :) Hope…

Downloads
48
Likes
3
Rating
0

Elegoo CC1 Filament Poop Bucket (with Canvas)

I couldn't find a filament poop bucket that was both easy to remove/empty AND that would work with the Elegoo CC1 w/Canvas because the access port cable was in the way every model. My printer is on my work table backed up against a wall…

Downloads
47
Likes
5
Rating
0
P
Printablespeppercat

Elegoo CC1 Segmented Pipe Purge Chute

Anticipating a higher volume of filament waste after I receive the Canvas (multi-color) add-on for my Centauri Carbon, I needed a different poop collection solution than the moderately sized drawer type collector I'm now using. Also, with…

Downloads
45
Likes
8
Rating
0
P
PrintablesHEXITAG

Cc1101 - NRF24 Case RF para Cardputer ADV

⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…

Downloads
43
Likes
12
Rating
0

CC1 canvas to CC2 spool holder mount

A simple adapter to give the CC1 canvas rewind spools the same mounting as the CC2 fixed orientation and added original spacer back on

Downloads
43
Likes
9
Rating
5
P
PrintablesRaschen

cc1101 flipper

1 x CC1101 module (https://aliexpress.ru/item/1005006427856868.html) 1 x 5v to 3.3 (https://aliexpress.ru/item/1005004680123549.html) 3 x 16x2,5 screws

Downloads
41
Likes
5
Rating
0
P
PrintablesMaker_Bacon

Elegoo Centauri Carbon (CC1) Slotted Cable Chain Connector

I slotted indi001's chain connector to relieve the crimping of the print head cable caused by the Canvas upgrade. A Right Hand & Left Hand version included (depending if you followed the video instructions or the written instructions).

Downloads
41
Likes
5
Rating
0
P
PrintablesBlueMarvel

Elegoo CC1 & CC2 Magnetic Filament Waste Bin

A filament purge bin for Elegoo Centauri Carbon 1 & Centauri Carbon 2 machines. It may fit other machines where the chute width is about 42mm wide or less. The first model is 78mm in height (71mm internally usable for filament waste)…

Downloads
37
Likes
5
Rating
0
P
Printablessloped

Case for CC1101 Module with SMA Antenna

This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…

Downloads
36
Likes
4
Rating
0
P
PrintablesLaurent Chaussy

Centauri Carbon CC1 canvas lid made from a plastic box

The original design lacks information on the construction process. I'm therefore adding some information here. The square box is from Action : https://www.action.com/fr-fr/p/2533849/boite-de-rangement-avec-couvercle-clipse/ The box can be…

Downloads
36
Likes
10
Rating
0
P
PrintablesJOHNDOE2025

elegoo centauri spool connector for cc1,cc2 etc

heres a direct copy down to the mm of the connector that holds the retractable spools to the side of the elegoo centauri carbon 2. i got fed up with searching trying to find one. so i decoded to design my own. i printed mine in pla but…

Downloads
33
Likes
8
Rating
5
P
PrintablesMugz

lilygo cc1101 plus case

This is a work in progress, this case will fit you're Lilygo CC1101 Plus that has the external antennas (the latest model) See my other prints for this new desk / display stand…

Downloads
30
Likes
1
Rating
0
P
PrintablesADubs1995

Toolholder Remix for CC1 Canvas Relocation & Riser

Description: Toolholder / tool caddy for the popular AL ExtremeError (aka @AEE ) Elegoo Centauri Canvas Relocation & Riser W/ LED. Front or left mounted. For the Centauri Carbon 1 with Canvas upgrade. Versions for the 45deg LED and 45deg…

Downloads
29
Likes
13
Rating
5
P
PrintablesADubs1995

PTFE Skylight for CC1 Canvas Relocation & Riser

Description: Community feedback on the popular @ALExtremeError (aka @AEE ) Elegoo Centauri Canvas Relocation & Riser W/ LED often mentions trouble with seating the PTFE tubes and being unable to see what's happening inside the riser. This…

Downloads
28
Likes
15
Rating
0
P
PrintablesCaracalDB

ESP32 NRF24 and CC1101 Board Case and Pin Protector

Case and Pin Protector for CaracalDB ESP32 NRF24 and CC1101 Add-on board for Flipper Zero

Downloads
25
Likes
3
Rating
0
P
PrintablesOsa IT

Centauri-Monitor - ESP32 Elegoo CC1 status monitor

Centauri-Monitor - ESP32 Elegoo CC1 status monitor A 3D print monitor for Elegoo Centauri Carbon printer(CC1), running on an ESP32-C3 with an OLED display and a web-based configuration panel. Features Reads printer status via the SDCP…

Downloads
24
Likes
5
Rating
5
P
Printablesfelipechipa

Elegoo CC1 magnetic screen cover with logo

Remix from Elegoo Centauri Carbon Screen Cover by MagicShrimp. Added 3x2 mm magnets on each corner so it can rest on the side panel when I need to use the screen.

Downloads
23
Likes
5
Rating
5
P
PrintablesDustin

Waveshare ESP32 ETH POE kit + CC1101

This is a case for the Waveshare ESP32 ETH POE kit. It could probably use some more tweaks, but it let me get my RF Proxy into a case relatively easily! Here is the original design in OnShape . I used this setup to make an RF Proxy using…

Downloads
21
Likes
0
Rating
0
P
PrintablesRon B

Elegoo CC1 Canvas Filament Spool Holder Relocator

The Filament Spool Holders utilize the original spindle mounts supplied in the Canvas kit for the CC1. Narrows the overall profile and space required for the original mounting. Designed to be used with the following Canvas relocation…

Downloads
21
Likes
3
Rating
0
P
PrintablesGabry Apix

CC1 Canvas Hub Quick Connect

The print consist in 2 pieces, the bracket and the plate, the bracket replaces the original one that comes in the canvas kit, while the plate goes right against the back of the hub and needs to be screwed. Be advised that you cannot use…

Downloads
21
Likes
5
Rating
4.5
P
PrintablesCaracalDB

ESP32 GPS and CC1101 Board Case and Pin Protector

Case and Pin Protector for CaracalDB ESP32 GPS and CC1101 Add-on board for Flipper Zero

Downloads
20
Likes
3
Rating
0

[CC1] Z Axis Rod Well cover

Here I created a Z Axis well cover for the Centauri carbon, to save myself and others from having to keep cleaning them out when they have a failed print. keep in mind that you may have to adjust settings or remove these covers if you…

Downloads
19
Likes
2
Rating
0

CC1 Repair Tray

Repair and maintenance tray build to max dimensions of Centauri Carbon build plates and hold a Ryobi Electric Screwdriver with several bits and extensions. Chamfered compartments for small parts for ease of grabbing. V2 includes embossed…

Downloads
19
Likes
2
Rating
0

[CC1] Run-out Sensor hole cover

I made this cover so I can continue to print with engineering filaments and force the gasses to only come out through the HEPA filter, not any other ports and openings available. It works with the Canvas upgrade and the Attachments to…

Downloads
19
Likes
3
Rating
5
P
PrintablesMainfoldium

Skinnier and CC1 Canvas compatible chute remix

Made a simple remix of the remix from @FREE272 to make the chute compatible with CC1 Canvas connector's location so both the drawer clears the cable with some spare room, as well as made it slimmer so it can sit close to wall with exactly…

Downloads
19
Likes
0
Rating
1
P
PrintablesEthan Bunch

Elegoo CC1 Internal poop chute CANVAS UPGRADED VERSION

Remix of a remix I bought the Canvas upgrade for my printer and one of the things you install is a new poop chute. The new one has some definite advantages like a better brush set and better positioning for the nozzle wiper. However the…

Downloads
18
Likes
7
Rating
0
P
PrintablesDK1MI

CC1200 M17 Hotspot Case

A (remixed) case for the CC1200 M17 Rev B Hotspot: https://rz01.org/cc1200/

Downloads
17
Likes
1
Rating
0
P
PrintablesDashRulez

ELEGANT CASE ENCLOSURE PINGEQUA | Flipper Zero NRF24+CC1101

Description EN Meet the Elegant Case Enclosure for PINGEQUA Forget clunky, standard enclosures. This case was designed for those who appreciate premium aesthetics, satisfying tactile mechanics, and high-quality finishes. Tailor-made for…

Downloads
17
Likes
1
Rating
0
P
PrintablesCrux3d.com

Centauri Carbon 1 (CC1) Old Spool holder TPU Plug for Canvas upgrade

Whether you upgraded to canvas or made a new spool holder this will plug the gap from the old default CC1 Spool holder. I made to fit perfectly tight and snap in. Just unscrew the old one and push in this print. Print settings: CC1 Elegoo…

Downloads
17
Likes
4
Rating
0
P
PrintablesRon B

Center Mounted Elegoo CC1 Canvas Mount

Here we go boys and girls the center mounted canvas system. No one else did it so I did. Reminder it's only my best idea, you may have improvements or ideas, but your best idea was only inspired by mine. Inspiration is the only gift I can…

Downloads
16
Likes
7
Rating
0
P
PrintablesSavage

chitu for cc1

chitu chamber heater for elegoo centauri carbon 1. PEBA/TPU plug for hole. uses the internal stock filament holder studes for mounting and stock hard ware 4 layers print the vents without infill wiht .4 nozzle no supports needed i…

Downloads
15
Likes
1
Rating
5
P
PrintablesStephen J

Stand for Comsol DCC120 USBC/A Power Supply

I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…

Downloads
15
Likes
1
Rating
0
P
PrintablesPeran Watkinson

REMIX Flat CC1 Spool Holder Plug with/without Screwdriver Hole

Simple flat plug for the spool holder of the Centauri Carbon. Can be inserted by hand or with a flat-head screwdriver.

Downloads
14
Likes
0
Rating
0
P
Printablesmasupilami

esp32 wroom 32 cc1101 433 mhz

compact case holding a esp32 wroom dev board plus cc1101 in the most compact way, by building a sandwich. see pictures for details. can be used for espsomfy or to control other 433mhz devices

Downloads
14
Likes
3
Rating
0
P
PrintablesRieva

ownMade - Wahoo Elemnt WFCC1 Holder mount V2 ( Crivit Urban X 3.0 Electric Bike )

I made a nice holder for mine Wahoo Elemnt WFCC1 I place it on mij steering wheel for mine Crivit Urban X3 Holder Mount 40 x 108.8 x 16.6 mm

Downloads
13
Likes
4
Rating
0
P
PrintablesAlex

Elegoo CC1 Tool Holder

Most tool holders I found were made to fit very specific tools, which makes them annoying if you want to store something with a weird shape or add new tools later. I wanted something more flexible, so I made this holder with a modular…

Downloads
13
Likes
3
Rating
0
P
PrintablesDezadocys

CC1 gap filler for CC2 Top Hat

This is a gap filler for the centauri carbon 1 that is using a centauri carbon 2 top hat. It fits pretty well I ended up using tape to hold the dovetail joints a little stronger on the thinner sections. for the cut models i removed the…

Downloads
13
Likes
3
Rating
0

Esp32 D1 Mini Project Box Bresser 6 in one RF 868mhz Reader with cc1101 receiver

Weather station case for an esp32 D1 mini and a RF receiver. Project repository for the hardware: https://gitlab.com/raupulus/esp32-weatherstation-bresser-read-868mhz-cc1101

Downloads
11
Likes
0
Rating
0
P
Printablesver2go

Minpin 115 CC1563 Camera Mount Top Plate

Minpin 115 Top Camera plate for http://www.thingiverse.com/thing:1329897 http://www.rcgroups.com/forums/showthread.php?t=2580356 4/21 - Added version with antenna strain relief 4/25 - Changed the antenna strain relief version to 4…

Downloads
11
Likes
1
Rating
0
P
PrintablesI I

Pulley for 2cc1

This is original size pulley for motor drilling machine 2cc1 or 2cc1m (Saratovskij zavod tyazhelyh zuboreznyh stankov).

Downloads
10
Likes
2
Rating
0

[CC1] Lowered Canvas Remix (originally made by MU74NT) for TPU Conversion

Here I made a modification to a Canvas riser I liked made by another creator. it's nearly the same size as the emoji edition CC2 but made for the CC1. I made this addition so I can still print TPU without going through the canvas unit. I…

Downloads
10
Likes
2
Rating
0
P
Printablesmeshvault3d

Aston Martin CC100

Aston Martin CC100 scale car 3d model stl for 3d printing, a realistic civilian vehicle model made for collectors and diorama displays. You get a clean, display-ready Aston Martin CC100 model that works great for desk and shelf decor,…

Downloads
10
Likes
1
Rating
0
P
PrintablesTobias Quvang

CC1 Top Hat (PTFE in rear)

Super simple CC1 Top Hat with PTFE in the old way, (not all that fancy stuff!) XD info: -Fits on one plate -723Gram for the whole thing -uses the top glass as lid. Settings: Layer hight "0.2mm" wall loop "3" Infill "7%" (CUBIC)…

Downloads
10
Likes
3
Rating
0
P
PrintablesGabry Apix

CC1 Enclosed Canvas Poop Bin

The model is made in 3 pieces for printability, the drawer, the mount and the enclosure Be advised that you need to glue the mount to the enclosure via the lip, I reccommend that you first screw in the mount to the printer, then apply…

Downloads
10
Likes
1
Rating
0
P
PrintablesShiota

Elegoo CC1 Waste Slope and Outlet Cover - Right Exit

A waste (poop) slope and outlet cover for the Elegoo Centauri Carbon (CC1). The slope directs purge filament out to the right side of the printer. The separate cover goes over the printer’s waste outlet. Mount both with double-sided tape;…

Downloads
10
Likes
4
Rating
0
P
PrintablesAngryPeanut

Remixed bottom case part for CC1101 Flipper adapter

This case has an opening in the back to allow space for the pins for when using it without the flipper.

Downloads
9
Likes
0
Rating
0
P
PrintablesStephen J

End Cap Stand for Comsol DCC120 USBC/A Power Supply

I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement end-cap style stand that…

Downloads
7
Likes
1
Rating
0
P
PrintablesHomoProtean

Elegoo CC1 Canvas 5kg spool extension holder

The Spool Collar has a small support that may need trimmed off from the hex side in order to slide in the slot on the Extensions smoothly. For a low profile fit, there is the 5kg Extension. For a positive installation of the Spool Collar,…

Downloads
7
Likes
1
Rating
0
P
PrintablesMauledSeal

CC1 CANVAS Spool Holder Stand

This is a spool holder stand I made for the Centauri Carbon 1 CANVAS upgrade kit. It uses the screws and the spool holder mounts that comes with the kit. You will have to take the mounts off the metal pieces that come with the kit and put…

Downloads
7
Likes
3
Rating
0