121,414 models
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Official Remix "Extra Size Cat" is released!! https://www.printables.com/model/1146999-official-remix-flexi-extra-size-cat-print-in-place Since there were many requests for longer cat, I decided to release it as an Official Remix. This…
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
This is a working cannon. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need or shoot paper balls, peas, etc. Print it as a toy for your kids, grandkids, or present it…
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
This thing spirals long distances like nobody's business and flies with ghost-like movement! I have made a major update… a TWISTY update if you will ! 🌀 Please, check out the video above. Every throw is around 50 to 60 yards plus! ↪…
Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print orientation: flat
**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out. It's been added back…
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
Now you can buy a printed one at: https://trajann.com/collections/fandesign with special Black Friday discount code"BF25OFF" Updated20231109 Someone suggested designing a new one for the baby, so I made a new one, just scale the length,…
Articulated Minecraft Creeper: Print-In-Place From the best-selling video game Minecraft. Print-In-Place and fully articulated. Optional face pieces included. Designed in Fusion 360. UPDATE 3/28/2024: Fixed model orientation. Made Head…
A race car that'll fit a hot-wheels track. Overall dimensions are at scale of a typical car of this type. Movable wheels with a 0.3mm gap that most printers can handle. Version 4 has the wheels lowered (body raised) by 1mm and front wing…
I’m deeply honored that my design was been nominated for the awards! Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects…
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…
Easy to use Easy to print
Each variant is optimized with dedicated print profiles to suit different filament types: Basic filament for standard materials. (PLA Basic) Matte and silk filament to accommodate the increased friction of these materials, ensuring smooth…
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…
>>> Updated to V2. more consistent channel clearance (see sketch image). 0.4 stamp is also moved to bottom now for consistency with other dimensional stamps. It's my take on tolerance test. It's a tolerance test with a taste of fidget…
Relaxation ring with a gear wheel, print in place If the ring is difficult to fit, run it under water, push it to twist in all directions, it helped me a lot In g-code, a collar is set around so that the model does not come off - I…
These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…
Easy to use - Version 2.0 Better readable
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
Ever wanted an articulated millipede toy that you could 3D print and not need any supports or any assembly and works straight off the bed? Well here he is. FDM millipede printed in Snolabs Black Amethyst PLA+. 2 layer height, 10% infill…
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
Skew Dice™ Disclaimer: The commercial version of the Skew Dice™ was designed by Robert Fathauer and Henry Segerman . Indeed, Skew Dice™ is a trademark of their company: The Dice Lab . Please, go buy some of their amazing products! These…
- Prusa Print files added! - Presenting you: my iteration of a Roll up Chess set! Please like, share, download, rate and all the amazing good stuff :) I have seen many roll-up chess models, but none that would fit my needs. What I really…
Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
Also my second version of the miniature vice became very popular right after it's release. If you don't have it yet, here are the files for the vice itself: https://www.prusaprinters.org/prints/53471 Update 23.01.22: New fully printed…
Nativity Scene from scan of decoration.
Creality Space Pi is a nice filament dryer. However, there is one major flaw (similar to some other dryers, like Sunlu S2) - it does not vent out the humid air. This traps humid air inside the dryer, making it hard if not impossible to…
Found this one on Thingiverse designed by user "Robo" Link to his design : https://www.thingiverse.com/thing:4889525 Had to scale it up 220% so it doesn't look small on the cacke. It barely fits on my print bed:)
The must have tool for your workbench !!! Only 3,52 gram's !!!
Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…
Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
[Update] ---2024/07/14--- Added ammonite parts. You can make your own Flexi Ammonite. This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse and Printables. Flexi Squid & Ammonite Set by…
This is a working slot machine. It has a spring to spin two lucky wheels. Use the feet on the back to display the slot machine on your desk, so people will pick it up and play. Or print it as a toy for your kids, grandkids, or friends.…
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Did you lose/break the lace lock on your shoes, coat, sweatpants, hoodie, or camping gear? Did they not come with one to begin with? Say goodbye to self-untying shoes and slowly descending sweatpants with this 100% 3D printed gadget.…
Finally finished! More difficult to design than I expected. Printing the portal is optional. No support needed. I'm trying to design the tower and the portal to avoid supports, use the minimum amount of plastic, and look pretty cool. I…
Description A simple tolerance tester that let you choose the correct fit when designing your parts or calibrating your printer. The numbers are in mm from 0 to 0.5mm of tolerance. You can try both square and circle shape both 10mm…
The new center marker, now with ruler incl. and a more robust design !!!
Modular Dice Tower Print instructions .1 Layer height, 35mm/s. Filament PM Galaxy Silver. 65+ hours
A simple cable organizer when you really have to many cables to manage. The design is similar to what you can find in computer room (usually it is several meters in length and you cut it to size, but here we are limited to the print bed…
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
D20 Dice Box – Magnetic Hey maker! 👋 A practical and stylish D20 dice box with a secure magnetic lid. Features: Designed for 5×5 mm round magnets for a snug closure. Works with flatter magnets using a printed spacer. Secure transport and…
The DtM-v3.0 face shield PPE design has been reviewed and approved for use by the USA National Institutes of Health (NIH). See also the design on the NIH website here: https://3dprint.nih.gov/discover/3dpx-013359 Files on this post…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
Skull Pop Can Holder / Chalice.
VW Bus Pen Holder with Accessories for someone who wants to decorate and organize his desk! HowToPrint : - Recommended Layer Height: 0,2mm ( 0,1mm / 0,05 for Logo & Lights) - Support: No - Infill: 20-25 % - PLA / PETG works fine. -…
Blank: Golden Boot Trophy: Soccer Cleat Trophy Angled Front Piece for easy name addition. Add your own Text in Prusa slicer (right click -→ add part -→ Text)
This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…
This remix of my original Flat Pack Mini Box is customizable within PrusaSlicer and has the following features: Stores 9 Lucky 13 hands in sockets UPDATE: alternate version for 9 Mini 13 hands on ball posts Stores two original Lucky 13…
You did it! The original Günther has reached 15.000 downloads, so here it is: Fünther. It's like Günther but one better. With a shaped body so it fits the rest of the FlexiDinos. Edit, 23. 7. 2026: Updated the MOST 1:100 version and cover…
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Keychain from game Minecraft Sword Axe ... - SketchUp 8 + stl + gcode (Ender 3 v2 Prusa Slicer)
Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.
Storage boxes for coin cell / button batteries Also included customizable Fusion360 parametric model (battery size & quantity) Printed on modified Ender 3 at 0.2mm height
Prints Parameters : Layer Height : 0.2mm / 200um Perimeters : 6 (recommended) ~ Initially the lock may seem to be a little tight but with over a period of time and use, they will be lose enough! ~ ^This has been fixed now! Left the…
Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…
Dolphin necklace A nice little gift which takes less than 30 minuets to print. Uses less than 1g of filament The model is small so unless a printer is set up perfectly stringing can be present. Some time and care after printing may be…
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial All files have been test print on a MK3s+/CR10s printed in PETG. If there's a piece missing shoot me a…
Bierverschluss für draußen als Schutz vor Insekten. Der Verschluss ist nicht zum festen abdichten gedacht, Print in Place. Gedruckt mit PLA 0,15mm Schichthöhe und 5 Wänden. Zusätzlich: Update 26.01.25 etwas mehr Spiel in den Gelenken, für…
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
I saw the super cool print in place box by DrJones and i wanted to try to make it so only I can open it. Print it with low filament flow so the parts dont get stuck together. (All redy set to low flow in the g.code) All box sizes are the…
