Search results: config

Sort order

419 models

P
Printablescurcuz

Lian Li O11 Dynamic GPU anti-sag for bottom fans configuration

I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…

Downloads
785
Likes
83
Rating
5
P
PrintablesJulian G

Configurable USB drive case

I had an old USB drive around with a broken mechanism in the case so I decided to print a new one. The openSCAD model is very configurable, so you can configure this for your USB drive, or whatever else. One possible improvement I would…

Downloads
382
Likes
30
Rating
5
P
PrintablesVladimir Vitkov

Configurable Bulgarian Coins

Very simple set of models for all bulgarian coins. Fast and lightweight print. Can additionally be used as trolley tokens (the 20 and 50 denominations). How to use Customizer Download the scad file, open it in OpenSCAD and play with the…

Downloads
40
Likes
5
Rating
5
P
PrintablesMakkuro

Emoji Box - configurable!

Have a rounded emoji box for your stuff - now the box itself says what's inside! Customizing Use OpenSCAD or the makerworld customizer to adapt the emoji and sizes as needed! Multicolor model Create with type set to: “both”, and save as…

Downloads
34
Likes
9
Rating
0
P
PrintablesHardwareLab

Multiconfiguration WAGO Junction box FREE

This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…

Downloads
8,734
Likes
4,928
Rating
4.83
P

Boost your multicolor prints! Central filament sensor mount with filament clips for single / double spool configuration for Elegoo Neptune 3 / 4 Pro Plus Max

Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…

Downloads
5,027
Likes
719
Rating
4.77
P
PrintablesBillyMayonaiz

P1P TPU Profile Configurations - Black Overture TPU

**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…

Downloads
4,985
Likes
145
Rating
5

Anycubic Kobra 3 Orca Profile V2 - Tested & Verified with 6 Configs + Heatbed STL

This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…

Downloads
4,840
Likes
274
Rating
4.33
P
Printablesdanibor09

Flying Bear Ghost 5 PrusaSlicer Config Bundle (with bed texture and bed shape)

This is my Flying Bear Ghost 5 PrusaSlicer Configuration Bundle. Settings are made for a fast print, while keeping good quality. PLA is printed at 200° C with printbed at 60° C and PETG is printed at 220° C with printbed at 60° C. If you…

Downloads
4,696
Likes
74
Rating
5
P
PrintablesMichael

Elegoo Neptune 4/Pro OrcaSlicer V2.0.0 config [New Firmware]

Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…

Downloads
4,556
Likes
244
Rating
5
P

Creality Ender-3 V3 KE config bundle for PrusaSlicer

My configuration for PrusaSlicer. I will gradually edit the profiles. Printer: Creality Ender-3 V3 KE Print Setting: 0.10mm and 0.2mm | SLOW, NORMAL and SPEED Filament: PLA, PETG, TPU (SPEED has disable auto cooling) 🆕 for all nozzles on…

Downloads
3,276
Likes
198
Rating
4.6
P
Printablesabbymath

Multi-Color Filament Configuration Disk: MCFCD

Do you have some new, fancy dual-color or tri-color filament to play with? Are you wondering which angle to best rotate your model before printing? This Multi-Color Filament Configuration Disk or “MCFCD” will help you determine the angles…

Downloads
2,411
Likes
243
Rating
5
P
PrintablesBrandon Wang

K1/K1 Max orcaslicer config

you need select klipper machine and import json files.

Downloads
2,187
Likes
189
Rating
0
P
Printablestmackay

Lament Configuration Puzzle Box

OG Lament Configuration for your Hell Priest or Kirsty Cotton cosplay in homage to the classic horror, Hellraiser. An actual, working puzzle box! Do you dare enter "The Labyrinth"? Updated for ease of printing and assembly. It's still a…

Downloads
2,121
Likes
400
Rating
4.95
P
PrintablesMar Ber

Konfigurierbare Box (incl. Fusion File) - configurable Box

deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…

Downloads
1,956
Likes
415
Rating
5
P
PrintablesMechVince

Elegoo Neptune 4 Pro PETG config bundle

I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…

Downloads
1,937
Likes
134
Rating
5
P
PrintablesCamaro45th

K1 Max CFS w/ Orca Config & Test Print 7/9/25 Update

Update 7/9/25- I am uploading a new file for this as the Y coordinates changes when adding the CFS upgrade kit. The new Print Volume is 300x295x300 as per Creality Wiki. I discovered this issue when trying to print my Z offset test and I…

Downloads
1,712
Likes
88
Rating
5
P
PrintablesSSX556

BentoBox v2.0 5015 pull-configuration case+shroud

Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…

Downloads
1,612
Likes
299
Rating
4.88
P
PrintablesCamaro45th

K1/K1C/K1SE CFS Upgrade Orca Slicer Config-Test-v8

Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…

Downloads
1,610
Likes
99
Rating
5
P
PrintablesAboshi

Kingroon KP3S Klipper Configs and Firmware

Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S

Downloads
1,533
Likes
114
Rating
5
P
PrintablesMakkuro

Wobbly letter cube keychain (configurable)

A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…

Downloads
1,407
Likes
158
Rating
5
P

TPU Test Cube Prusa MK3S with Config for Ninjaflex

This is simple test cube of 20mm dimensions with a 10mm hole. The Fusion 360 file is included as well. I had a lot of trouble getting TPU to print and wanted to share how I did it. For adhesion issues on the MK3s I used blue tape on the…

Downloads
1,246
Likes
38
Rating
4.86
P
PrintablesMakkuro

Letter bead keychain (configurable)

A keychain with your or your family/friends first name, written in individual letter beads. The beads are free to rotate and move after printing, so its also good for fidgeting. Note that this model is print-in-place, so no support…

Downloads
1,152
Likes
280
Rating
5
P
PrintablesMortalWombat

Kingroon KP5L Starter Kit & Klipper Config

The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…

Downloads
1,069
Likes
41
Rating
5
P
PrintablesBanditFPVprints

Bambu labs 3D Printed RC plane configs

Configs with recommended PrusaSlicer configs into Bambu Studio specifically for 3D Lab Print models - does not work for Cura Surface mode models, not available in Bambu Studio. Internal structure correctly prints :)! See json files in…

Downloads
1,035
Likes
41
Rating
5
P
PrintablesChris Hill

Spool holder (1kg or 2kg) for Original Prusa Enclosure - Configurable

This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…

Downloads
920
Likes
208
Rating
4.95
P
PrintablesWagZ

FLSun V400 Prusa Configs

So here's a config bundle. This bundle includes all the profiles ive made specifically for my stock FLSun V400. It also includes the V400 printer configs as well. The Profiles ive made included some layer heights from 0.1 up to 0.3 layer…

Downloads
917
Likes
82
Rating
5
P
PrintablesBrandon Wang

Creality K2 Plus orcaslicer config

download the K2Plus_orca_config.3mf import to orcaslicer

Downloads
858
Likes
79
Rating
0
P
PrintablesSteve Hodge

Hellraiser / LeMarchand / Lament Configuration Puzzle Box

A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…

Downloads
828
Likes
180
Rating
5
P
Printablesslemmin

Configurable Parametric Project Box

This box is intended to be customized, the default configuration probably won't work for very many people. Simple changes like box size can be made with the OpenSCAD customizer but due to limitations in its capabilities most of the really…

Downloads
821
Likes
79
Rating
5
P

Gridfinity Storage Box Label (configurable)

This is currently an untested print! I am sharing this because this is a start/attempt to generate the labels for this box Print Instructions Print instructions haven't changed compared to the original model Label Recommended profile:…

Downloads
798
Likes
166
Rating
5
P
PrintablesLoboCNC

Reconfigurable Multi-jaw Vise

This multi-jaw vise consists of a base plate and 3 or 4 rack & worm jaw units. Pins in the bottom of each rack slip into keyhole slots in the base for quick reconfiguration. Each jaw slides onto grooves in the rack, trapping a worm/knob…

Downloads
789
Likes
492
Rating
4.8
P
PrintablesPeter Farell

Hellraiser Lament Configuration

Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…

Downloads
789
Likes
135
Rating
5
P
PrintablesdjeZo888

OrcaSlicer KobraMax 0.8nozzle PLA config

OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…

Downloads
769
Likes
15
Rating
5
P

Configurable Slim Wallet

A slim wallet for credit cards etc.. Simply configure it the way you like it and that suits your needs. No support needed! ---- Updates 31/7-2022 - New Sideplate: Hexagon with Printebels logo. 9/8-2022 - New Sideplate: Striped. ---- First…

Downloads
758
Likes
175
Rating
5
P
Printablesironfinch

Card Deck Holders (many sizes configurations)

These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…

Downloads
741
Likes
110
Rating
5
P
PrintablesDasLukas

Moon Lamp Adapter Hidden Socket - Configurable

Motivation: After having issues with my existing lamp sockets in finding a suitable stand for my Moon Lamp, I decided to create a new adapter. With this adapter, the majority of the socket is concealed within the adapter itself, and…

Downloads
697
Likes
301
Rating
5

Reconfigurable 22.5 & 45 Degree 3-Way Elbows, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings UPDATE 2015-07-03

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…

Downloads
575
Likes
191
Rating
5
P
PrintablesBombastus Hands

Configurable Router Template Set

As you will know from working with a wood router , there are many calculators and tools to dimension your templates. Still, after calculating you have to build the template yourself. Here's your all-round package: calculation and design…

Downloads
555
Likes
99
Rating
0
P
PrintablesIce992

K1 Max PrusaSlicer Configs for PLA & ASA

K1 Max PrusaSlicer Configs for PLA & ASA Includes my base settings for the K1 Max for PrusaSlicer. The printer config itself has GCode for disabling case/side fans for ASA, and enabling them for PLA. These are rough setups which I haven't…

Downloads
552
Likes
16
Rating
0
P
PrintablesAsk Lysdahl

Prusa Slicer Flashforge AD5M Forge-X config bundle

Install Forge-X on your printer and set it up: https://github.com/DrA1ex/ff5m Import the config bundle into Prusa Slicer and add the build plate STL to the printer profile.

Downloads
549
Likes
14
Rating
5
P
Printablesroman_hegglin

Customizable Atom Deluxe (every element preconfigured)

Choose your favorite Element and print it out. No, not the Atom itself, but a bohr-model of the atom anyway. Feedback requested! Let me know if you are about to discover some new elements! I gladly extend my script with your new…

Downloads
543
Likes
44
Rating
4.56
P
Printableslorez42

Configurable Temperature Tower

I needed a bit more range than some other temperature towers, so I made a configurable Temperature tower based on: https://www.printables.com/model/38895-temp-tower-prusaslicer-02mm-layer-petg https://www.thingiverse.com/thing:2493504…

Downloads
542
Likes
29
Rating
5
P
PrintablesN9

Anycubic Slicer Config Kobra 2

This is a slicer config file for the Anycubic Slicer (tested on 1.3) that will work on any Kobra 2 model. You may have more configurable options but the main settings in this file will help almost everyone. Added Gcode before and after…

Downloads
533
Likes
27
Rating
0
P
Printablesjvidal

Configurable size card box

This is not only another simple card box, but it is a fully configurable card box for every card size you need. I decided to build my version, adding some improvements and ensuring anyone can modify the inner size easily. You can find 3…

Downloads
519
Likes
147
Rating
5
P
PrintablesMakkuro

Configurable cable label

Configurable, print-in-place, self-locking cable label. You can adapt the shown text and cable diameters. Just a single color change is needed to make the text stand out on both sides. It prints fast and you can print many labels in one…

Downloads
487
Likes
124
Rating
5
P
PrintablesDarren Lynch

ModuBox - Gridfinity compatible, configurable, box

TL;DR This is Modubox, a modular, expandable box Compatible with gridfinity If you like it, consider making a donation [ PayPal | BMaC ] To support this and future developments, consider becoming a patreon [ patreon ] Introduction ModuBox…

Downloads
469
Likes
89
Rating
0
P
PrintablesTMskillerTM

Advanced Neptune 3 Series Klipper Configuration (FULL RELEASE)

UPDATES 2025.08.08: Testing v2 Troubleshooting the problem with PID config (removed control = pid from [extruder] section) Fixed problem with position_endstop error (changed position_min in [stepper_z] section to -3.5) Improved clarity of…

Downloads
461
Likes
40
Rating
5
P
PrintablesMakkuro

Chain of Letters (configurable)

A keychain with your or your family/friends first name, written in individual letters , which form a flexible chain after printing. The chain is fun to fidget with :-). Note that this model is print-in-place, so no support material is…

Downloads
457
Likes
97
Rating
5
P
PrintablesChris Culpepper

Skadis Sharpie Holder - Configurable

This is a holder for Sharpies to clip them onto a Skadis pegboard. You can alter the .scad file for number of sharpies and height. The 45 degree cut in the print allows you to print it without support, and include the top and bottom…

Downloads
445
Likes
85
Rating
5
P
Printablesnevax

Configurable acceleration ghosting/rigging test print

Acceleration speed of 6 stages are configurable in slicer. Default configured values, update it as you wish: Perimeters Extermal perimeters 30 19 35 21 40 23 45 25 50 27 55 29 Use any filament, i personally use Prusament PETG glossy black…

Downloads
439
Likes
21
Rating
5
P
PrintablesDany

Gridfinity bins with labels (configurable) / Contenant avec etiquettes (configurable)

VERSION 2 (2023-08-16) I recreated everything from scratch in OpenSCAD The stackable issue is fixed Chamfer (45 degrees) on the lid The label is a bit narrower in this version You can easily edit it and add the label you want (see HOWTO…

Downloads
437
Likes
69
Rating
4.8
P
PrintablesJimbob

Modular Storage Box - Additional Drawer and Box Configurations

After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…

Downloads
413
Likes
90
Rating
0
P
PrintablesKatharsis

Configurable Belt Drive for First Stage of Transmission - 1/10 RC Drift

Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this EDITS: 1/26/24: Added multi-body STL for the…

Downloads
389
Likes
54
Rating
0
P
PrintablescamelCaseOnly

FLSUN T1 PRO Configuration Improvements

These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…

Downloads
367
Likes
50
Rating
5
P
PrintablesDC3D

Box the Configurable

Box the Configurable came to be as attempt to make a parametric design where a very few parameters had to be changed to get a new use. the file names have DxBxH in them where D and B has to be the same value to have the top part and the…

Downloads
353
Likes
106
Rating
5
P
PrintablesSvanGool

OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+)

OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+) This configuration is used for monitoring and controlling a Prusa MK3S(+) remotely using the OctoPrint software suite ( https://octoprint.org/ ) an RPI4B (…

Downloads
349
Likes
86
Rating
4.67
P
PrintablesN0dr4C

Orca Slicer config - Prusa MK4S + MMU3 (based on PrusaSlicer export)

Here is my personal configuration file for my Prusa MK4S + MMU3. I first imported PrusaSlicer configuration and adapted some bad conversion parameters and optimisation (for my usage). PETG and PLA profile No HF config Only 0.4mm nozzle…

Downloads
341
Likes
24
Rating
5
P
PrintablesJohan Vergeer

Configurable Stanley Fatmax Organizer Divider

This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…

Downloads
340
Likes
37
Rating
4.5
P
PrintablesRoger

1:29 scale SP Configuration Motorized OpenRailway EMD SW 1500 G Scale Locomotive

I am preparing to design and build a Krauss-Maffei locomotive, so I wanted to practice 3-D printing an entire locomotive. I used Daniel Noree's base design for the OpenRailway EMD SW 1500 and printed a 1:32 version of it that incorporated…

Downloads
337
Likes
56
Rating
5
P
Printablesdirtdigger

Reconfigurable Moto G Power Case

This is a variation of the case by kensikora ( https://www.thingiverse.com/thing:4425758 ) and mc88 ( https://www.thingiverse.com/thing:4589273/ ). I call it a variation rather than remix, because I cannot install 123 Design on Linux, and…

Downloads
333
Likes
18
Rating
0
P
PrintablesChris Hill

Bucket Grit Guard - Configurable

This is a ‘grit guard’ that will stop your car wash sponge picking up grit from the bottom of your bucket. It uses a hexagonal mesh because Hexagons are the Bestagons! Two STLs are included (flat mesh and deep mesh) but you can use the…

Downloads
323
Likes
39
Rating
5
P
Printablestmackay

Lament Configuration (Multi-Material)

See original for more options and details. Trying to keep this release nice and simple. Includes gold inlay as a separate model for a flush finish for MMU capable printers or dual extruders. Print both lower-art-v4.2.stl and…

Downloads
315
Likes
61
Rating
5
P
PrintablesJohn5

VKB STECS Base & Back Plate Reconfiguration Pack v1.0

VKB STECS Base & Back Plate Reconfiguration Pack v1.0 Created by John5 CC BY-NC-SA 4.0 Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for…

Downloads
313
Likes
32
Rating
5
P
Printables0xedd1e

Configurable snap-in PCB mount

A simple mount in which the PCB dimensions are parameterized using FreeCAD's spreadsheet functionality and that can be secured using two screws. Screw radius is also a parameter to be configured (1.5mm as default). Print settings I used…

Downloads
307
Likes
27
Rating
5
P
Printablesarminth

Configurable Height Test

Quick test to check if your printer can cope with a specified height. Use configurator to create your desired model height. Category: 3D Printer Accessories

Downloads
303
Likes
2
Rating
5
P
PrintablesAubsUK

Fully 3D Printed 4-Segment Configurable Storage Box With Hinged Lid and Clasp

Edit 2023-02-18 - 4-Segment_Configurable_BoxV01.01.f3d Fixed the fillet to the top of the lid where it disappeared when the number of clasps/hinges were changed. Added a fillet to the underside of the hinge bar so it opens and closes a…

Downloads
302
Likes
24
Rating
0

Soroban - Fully Parametric & Configurable Abacus

I recently watched a video of Japanese school kids using their Soroban to calculate at incredible speed; apparently it also helps with learning to do very fast mental calculation. I was impressed, and wanted to try and learn that – after…

Downloads
297
Likes
39
Rating
4.5
P
PrintablesToDamLazy

Samsung S24 Ultra Dock + Configurable .3fm File

I liked the design of the iPhone Dock which is a remix of, however, when I opened the provided model files I saw it wouldn't be easy to modify the size to fit my Samsung S24 Ultra. Instead of simply messing with the original model I…

Downloads
288
Likes
50
Rating
3
P
Printablestmackay

Lament Configuration Art Cube (Embossed)

The Lament configuration - art by artist064 "The original Lament Configuration was created by Simon Sayce for the original Hellraiser movie". I have attempted to remain faithful to the original design, however it is apparent that multiple…

Downloads
287
Likes
20
Rating
5
P
Printablespowtac

Cylinder Configurable

A simple geometric column/cylinder that is configurable via Customizer and OpenSCAD. Print instructions Unassociated tags: säule Category: Other Summary A simple geometric column/cylinder that is configurable via Customizer and OpenSCAD.

Downloads
286
Likes
5
Rating
0
P
PrintablesMakkuro

Configurable Stencil

This is a fully configurable stencil. Customize To get a proper stencil, install OpenSCAD and a stencil font on your own computer and follow these in depth instructions . You just activate the customizer and can change the text to your…

Downloads
279
Likes
67
Rating
5
P
Printableskaje

SPLA Print Parameter Test and Config file

Edit May 1, 2021 : I suggest using the improved version of this: https://www.prusaprinters.org/prints/65520-spla-print-parameter-test-and-config-file-improved SPLA is a filament type offered by SunLu. Although the name implies it is…

Downloads
274
Likes
2
Rating
0
P
PrintablesTMskillerTM

My Neptune 3 Pro Klipper and Orca config

INFO My Neptune 3 Pro configuration files. It consists of multiple files, some have essential macros, some have macros to make it more userfriendly and there's a central file with variables to control most macros. My hardware: Skr 1.4…

Downloads
272
Likes
12
Rating
0
P
Printableszbzzn

Sika Sealant Nozzle (configurable)

A nozzle that fits Sika containers (not the regular silicone ones!) You can configure the nozzle length and diameter in the link below…

Downloads
262
Likes
19
Rating
4
P
PrintablesScott C.

Another first-layer test print - slice it for your printer's configuration!

Have you ever wanted to redo your first-layer calibration, but you have a 0.6mm nozzle installed (or some other variant configuration)? The STL file below allows you to slice a first-layer test print for your printer's particular…

Downloads
260
Likes
6
Rating
5
P
PrintablesSteve DeGroof

Configurable Card Box

NOTE : This is a WIP, and part of a larger project. Things might change. To create a card box, copy all 4 SCAD files into the same folder, edit CardBox.scad to set the dimensions, and render. The main variables are: //width of a card…

Downloads
259
Likes
28
Rating
5

toothbrush holders (different models an configs)

Bathroom brush holder 06/25/2025 add new model with support plate for click Practical holder for toothbrushes, toothpaste and mouthwash. Different configurations for placement above the wash, or also placed on the wall. The default models…

Downloads
250
Likes
35
Rating
5
P
PrintablesBITaMinD R+D

KÅJJA - Fully Configurable parametric 80s pencil box.

Parametric pencil box inspired on one I had in my childhood, Is fully parametric modifying parameters in Spreadsheet. Both the lower an upper parts have insertions for separators and pencil holders. The upper part has also those…

Downloads
247
Likes
73
Rating
0
P
PrintablesTurtulino

Quick isometric perspective drawing dot grid template - Configurable

It is not a difficult model but there are some important details that must be taken into account so that it prints well. I recommend reading the printing instructions. Description and operation This template allows you to create an…

Downloads
246
Likes
132
Rating
5
P
PrintablesDominik

Configurable Household Task Planner

V2 update The items are now much easier to write - you can provide them as a comma separated list, which incidentally allows using of various online customizers. ---- Heavily inspired by Nils Kal's Household Task Planner , except…

Downloads
245
Likes
78
Rating
5
P
Printablesdavidmakes

Configurable Filament Spool Holder for Ikea Skadis

Customizable spool mount adapted for the Ikea Skadis using the Ultimount connector . Remixed from the 1 & 2 Spool wall mount model by Joesn . Comes in 2 pieces for easier, support-free printing, along with 2 support pins (you can either…

Downloads
242
Likes
15
Rating
0
P
PrintablesPeter Farell

The lost Lament Configuration

The lost Lament Configuration Dice/Box

Downloads
241
Likes
89
Rating
0
P
PrintablesAaen

Configurable battery pack frame

Battery holder/frame for battery packs. The parameters in the OnShape document can be changed to fit any battery type and any number of rows and columns. Included stl files for a few configurations for 18650 batteries: 2x6 2x8 2x10 3x3…

Downloads
234
Likes
35
Rating
0
P
PrintablesTTLMakerspace

LulzBot TAZ 6 PrusaSlicer Config Bundle

LulzBot TAZ 6 Config Bundle We recently received a donation of a Taz 6 3D printer to add to our fleet of 3D printers. Unfortunately, PrusaSlicer (as of 2.6.0) only has premade configs for the LulzBot TAZ 6 Aero and doesn't have profiles…

Downloads
233
Likes
10
Rating
3
P
PrintablesEtalon

Prusa Core One crazy fast profiles config bundle (from sample gcodes)

Well its a config bundle and so you have to import it first. If you slice benchy with this profile you will get a benchy in 8 minutes. This is just an upload of the Prusa's profiles used for the example gcode that comes with the printer.…

Downloads
231
Likes
38
Rating
5
P
PrintablesDale

Configurable rack for HPLC and other vials

This is a very handy configurable rack for creating an array of almost any size. The hole size, depth, number of rows/columns is all configurable. Print instructions No supports needed. Just use OpenSCAD to prepare the model, export as…

Downloads
230
Likes
21
Rating
4.5
P
Printablesiandouglas736

CR10 Mini PrusaSlicer config bundle and textures

I can't take credit for the texture files, they were from thingiverse, https://www.thingiverse.com/thing:3826493 Here's a GitHub gist of the config bundle I'm using to print PPE.…

Downloads
228
Likes
6
Rating
0
P
Printableskaje

SPLA Print Parameter Test and Config file - Improved

Previously I posted a config file for use with print SPLA : https://www.prusaprinters.org/prints/65005-spla-print-parameter-test-and-config-file While that configuration file works, it did have some problems with stringing. With more…

Downloads
227
Likes
1
Rating
5
P
PrintablesMakkuro

Configurable pack of dogs

You need configurable dogs? You have configurable dogs. You can generate dogs exactly like you want to have them, you can generate a random shaped dog or even 9 random shaped ones in one go. So its easy to start off your own pack of dogs.…

Downloads
224
Likes
41
Rating
5
P
PrintablesMathias

Camera Lens Filter Case - 72mm - fully configurable

This is a parameterized/configurable case for camera lens filters. The design goals were the following: sturdy and robust, so that the potentially expensive filter is properly protected ergonomic, easy to grab, hold and handle secure…

Downloads
222
Likes
43
Rating
5
P
Printablesnimrooz

Creality K2plus Orca slicer configuration file

Creality K2plus Orca slicer configuration file for CFS multifilament system, plus other settings. Add it to your ORCA slicer, etc, by pressing: import 3mf/stl → press OK → Then save printer profile.

Downloads
214
Likes
4
Rating
0
P
Printablesfumo

Hex Bolt Cap (configurable)

Often a cap is needed to hide the hex heads of bolts. With this configurable object you can make clip-on caps in whatever color you want. I include the freecad file which contains a spreadsheet to customize the cap size. Print in TPU or…

Downloads
211
Likes
15
Rating
5
P
PrintablesMike_GKA

Park bench (configurable)

Park bench (configurable) I was inspired by the Falco Swing park bench ( https://www.falcogmbh.de/produkte/stadtmobiliar/parkb%C3%A4nke/parkbank-falcoswing-mit-r%C3%BCckenlehne.html ), which can be found in some German cities. I recreated…

Downloads
207
Likes
27
Rating
5
P
PrintablesDape

Table soccer figures with configurator

You can choose among other countries, just click on Football figurine and then Edit: https://bit.ly/3OAs3TV

Downloads
205
Likes
13
Rating
0
P
Printablesbene

Honeycomb Pots (2 configurations)

A cool-looking, but also practical print - That's what I wanted to design to take part at the Pursa-Gardening-Contest. So I came up with this idea. A honeycomb pot-design, which can be configured in two ways: You can place one group…

Downloads
204
Likes
103
Rating
5
P
PrintablesMakkuro

Configurable index card holder

Here are three different designs to hold DIN A7 (74mm x 105mm) index cards. The top is chamfered, the cleanest look has the "box" version. You can fully customize each holder using OpenSCAD and the included .scad file: Choose from 3…

Downloads
202
Likes
36
Rating
5
P
PrintablesChris Hill

A compact box for a set of step drills (configurable)

This is a box that will hold a set of three step drills, with variants to suit the set as sold occasionally by Lidl (under the ‘Parkside’ brand) and the set from Aldi* (under the ‘Workzone’ brand), and it can be configured for other step…

Downloads
197
Likes
20
Rating
4.5
P
Printablesjulianjc84

Rugged Box Parametric Configurable OnShape CAD

Parametric or ‘Configurable’ inside web cad OnShape.com I dislike fusion 360 ReMade in onshape no install or account required. Onshape Professional CAD Click the link. Edit, Export.…

Downloads
191
Likes
97
Rating
5
P
PrintablesSpudd78

8 x 6" hobby / component box with removable tray (multiple configurations) and latching hinged lid - non-spill design

A handy component storage / hobby box with a hinged lid and clasps to keep it shut. Featuring a removable tray which when in place and the lid closed, prevents spillage of items between compartments (as long as the items are bigger than…

Downloads
189
Likes
53
Rating
5