367 models
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Pequeño deflector para el timón del surfski o kayak, para evitar que ramas o algas, se cuelen entre el timón y el surfski, ralentizando la velocidad. Se puede pegar con cinta de doble cara, o bien , con epoxy o algún pegamento compatible…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
It's based off of the BWM Genuine Slipstream Deflector, mostly because it can be printed off in several smaller parts but still work as well as the long oval designs. I'd suggest spraying a few layers of clear coat or paint since this is…
Print approx. €7.94–€9.70 excl. taxPreliminary estimate for one variant
A design born of necessity. The floor vent in my bathroom is right in front of the toilet against the wall. In summer, the AC freezes my feet, in winter the heat from the furnace directly below scorches my toes. Enter the HVAC deflector…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
Use this insert on existing ceiling ledlamp to enlight a shelf. This redirects some light horizontally but leave the main beam pass through. Use ASA to ensure structural strength under led heat (tested with 4,5W). ! Do not use is with non…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
This deflector is made to be mounted in existing ceiling LED lamp. it redirects light horizontally to create indirect lighting of your room. I use it in my bathroom for a cozy feel. Print in ASA is recommanded to prevent for deformation…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Anycubic Kobra X filament deflector and waste bin. The filament deflector mounts directly to the back of the filament extractor and is secured with screws. The filament waste bin is designed to fit snugly next to the Kobra X. It sits…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed the "Complete Purge System" in two versions for Bambu Lab A1 Series printers. The first…
Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.
This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…
Update: 2025-05-15 I've removed the bambu exclusive restriction and have set the license to allow remixes. Have seen a few other variants out there, but wanted something that was a little more minimalist as I have no need of silca bag…
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
The Snapmaker U1 has a bad habit of throwing its poop over the edge of the bucket. This deflector connects to the nozzle wipers and creates a barrier to help guide the waste filament into the bucket. Features: Can be printed without…
This poop deflector is a simple, lightweight accessory that slides onto the right side of the X linear rail of the Anycubic Kobra 3 Max. Its role is to redirect purge blobs and filament ooze away from the motion system and bed, guiding…
Print with 0.16 mm layer height , no support An extra plate can be printed from PETG or TPU and clamped into the deflector. This prevents the purge from sticking to the deflector. If the plate does not lift, simply glue it in place. The…
I was looking for some cool waste box for my A1, but haven't found version that both looked cool and was compatible with extra supports needed when you use AMS on the top and used deflector instead of huge wall. Hence designed this little…
This is one of the first accessories I designed for my S1 Pro. If you own one you probably know what this is for. I've been using this for a year and I have none of the typical cable insulation damage nor have I ever grabbed the y-axis…
UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…
similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…
Some benefits: airflow is channelled away from the printed parts perfect fit and installation without tools low material usage and low weight
A heat shield designed to stop hot air in the Creality Space Pi X4 and X4L from blowing directly onto the filament spools while drying. I found DJR Engineering 's heat shield on Makerworld . It was too flimsy for me, though. So I designed…
This deflector prevents poop from being shot everywhere, and channels it downwards into the appropriate container.
I had trouble with my previous Stop Block having too much deflection, and my measurements were inaccurate. I also needed a little more reach because of the Incra track so I modeled this Stop Block. I included an insert for Rockler T Track…
This is a magnetically attached vent deflector suitable for ceiling mounting, too. Magnets are 8x3 neodymium, this is the pack I bought (200 for $13.99) https://www.amazon.com/gp/product/B0CCXH6W5Q I used PETG since it will have hot air…
Thias is a more stable / durable Remix of Brad Bakers very useful original design: https://www.printables.com/model/1244644-kobra-3-max-poop-chutedeflector/files So this remix also needs a bit longer M3 screws. PETG is recomended instead…
Kobra 3 poop deflector without suports
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 60% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.2.1 Wall thickness 2.8 mm Top/bottom 2.8 mm Printing…
Air deflector for standard centralized ac vents. Use magnet of size 35x10x3 mm (LxBxW) 215mm for larger vents
Most flat panel TVs have the speakers on the bottom and the sound is directed downwards then in all directions. This deflector directs the sound towards the viewer increasing clarity. People like me that wear hearing aids this really…
smaller version of @mfetting 's poop director with an added grille
Simple model. Just slips over the purge ejector mounting piece.
This is the kobra 3 max poop chute/deflector. It might require a slightly longer m3 bolt than what is originally used
Hello folks, This is a floor register air deflector for standard 4"x10" floor registers. This is for use when a floor register/vent gets covered with a piece of furniture such as a couch. This diverter reduces the temperature…
This is a vase-mode (single-wall) print for a ceiling air vent. Just take some magnets and stick it to the vent. I have even printed this using LW-PLA to make it super light. Slicer Settings Wall Line Count: 1 Top Layers: 1 Bottom Layers:…
Kobra Fan Deflector On the Kobra there is a hole under the bed where the cable for the screen exits, and I noticed that when the printer is running there is a considerable draft from the MB fan exiting this hole. I had read somewhere that…
Simple deflector on motto guzzi tank (you have to mirror the other side) cc Daník ;)
I'm VERY new to 3d printing and this is a VERY basic model. Most of you could do much better with your eyes closed, but I've taken a few builds from here, so I thought I'd add one in return. This press fits (although you can use some…
I wanted a 40mm version of https://www.thingiverse.com/thing:1972504 so here is a remix. Holes have been adjusted to suit the smaller size of fan and widened slightly to 3.5mm. Print Settings Printer Brand: Creality Printer: Ender 3…
Rounding off the back because the vacuum…
3/2023 Updated both main parts for fit and easier installation I would obviously recommend using a high temp plastic, I used ABS. The deflector shield thing is whatever.. maybe kinda flimsy but it works. You just need something to keep…
This model is made up of 3 files: The Container, The Deflector, and Designer Notes . The Container: The container/slide is the largest part which consists of a slide and a small containment system at the bottom. The shape can also be…
A simple, low profile cover for a ceiling mounted HVAC register. Fusion 360 file (.f3d) provided so you can adjust parameters if required for your specific register. Model prints in two pieces if you only need one side; two pieces also…
A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this) I am not a…
This could be useful for controlling the direction of airflow, especially in situations where you want the cool air to be directed upward rather than straight ahead. It could potentially help the cool air to reach further. Just print and…
Printed in "as located on rail" position with supports. Update 14.04.2024: Added a mirror version for placement on the other end of the rail. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 50%…
No particular printing instructions. I made mine in PLA and it have been working fine for a couple of years. Glue with Tec-7 or similar to the underside of the drain channel. v.1x is made in TinkerCAD, hence the rough construction. v2…
Déflecteur permettant de parer l'éclat d'éblouissement lors de l'installation d'une bande led COB dans l'imprimante Bambu Lab X1. Il concentre la lumière vers le plateau d'impression. Élimine complètement l'éclat de lumière vers le haut…
Replacement inlet deflector for your Shop-Vac vacuum cleaner. Do not print in model orientation. Rotate it 90° so the plate is vertical. The deflection cup will be stronger. Use a good brim and supports under the cup and inside the hose…
Flaps can be connected each other. Each flap is 298 mm wide. I designed for my AC. You may need to adjust flap size for your AC. Step file was also added for flap. To eliminate weight print with one perimeter and %0 infill. Support is…
Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this under, Thank You! Side skirts fit on a cr-10 size bed, wheel arches fit on smaller printers. Split skirts coming soon…
This deflector attaches to a steel ceiling vent with 8 x 2mm magnets. The footprint of the part is 89mm wide by 267mm long. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
From the original model, this one is modified so that it does not use the printed screw and nut, but is modified so that the classic M4x30 mm hexagon head screw and also the M4 nut are used. Deflector is unchanged from the original model.…
Printed in "as located on rail" position with supports. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 50% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker…
This is a one piece, friction fit cap for a Wen track saw guide rail. printed using an AnkerMake M5C. Didn’t change any settings, went with a “fast print”. Works well, doesn’t fall off. Modeled in SketchUp. Walls are 3mm thick.
120mm Fan deflector I had'nt realised what impact the 120mm fan on top of the power supply running my HEVO (Hypercude Evolution) was having on my heated bed. It sits under the bed and reduces it's top temp by 20c - 25c Next step is to…
After setting up my 3d printers, I discovered they were in the direct line of fire from my forced air system which I wasn't crazy about. I designed a simple shroud to deflect all air the opposite direction so my prints aren't receiving…
This is designed to be printed without supports. Can be printed in any filament you like but I recommend PETG or ABS in preference to PLA as a bit of flexibility is nice to make it more durable. To fix this to the healight us four small…
Surface deflection meter for checking RC plane control surface throws Print 2 of each part, use a brim on the wing mount to keep it flat Add 2 10mm magnets to each wing mount. The brackets will stick to each other with thin wings. The…
This is a helpful accessoire when you want to deprime only on your Lee Precision Turret Press. After inserting this piece into the slot, the used primer will be redirected to the back hole. The piece clicks onto the rod and fits snugly…
The model is optimized to be lightweight while having a relatively large volume. It has 1.2mm wall thickness and requires about 70 gr of filament. It has an integrated deflector so that you don't need to print it separately. It is…
This remix was created to improve the reliability of the original Heat Shield Creality Space Pi. I added additional supports to make the model more resistant to thermal deformation during long operation of the filament dryer. I also…
A simplistic track saw deflector compatible with Powertec tracks. Highlightes: 1-piece construction. No more nuts or screws. Friction fit with easy installation/removal. Compatible with track clamps Caveats: Tested only on Powertec…
The main deflector design allows for use of at 1 ½" duct hose or the secondary deflector. The duct hose option can be used for a more precise redirection of the air, such as towards a rear facing car seat or a pet kennel. The mating piece…
The deflector is as big as it can be without hitting the fairing at full lock. Barely fits on Prusa MK3 print bed. Printed in PCTG with 1 mm top and bottom, ca. 1.5 mm perimeter and 15 % infill.
***** THERE HAVE BEEN REPORTS OF THIS DEFORMING FROM THE DRYER HEAT **** please post in your comments what brand and type filament and Temp you are using and ended up with a deformed warped deflector… I have run my dryer 2 times so far…
Vent air deflector for central air outlet that is behind my couch. This deflectors the air 90 degrees from the vent and blows it into the room instead of on the back of the couch. It is assembled with 3 M3 bolts and 3mm diameter magnetic…
Remixed version of Jackharvest's steam deflector. Made a hole for the flared part of the pressure valve, and changed the diameter of the bottom to allow for a tight fit.
You will also need: -2 screws 6mm -super glue What is inside? -flaps (two kinds) - one with screw holes (it's essential part). second one is only to extend width of basic flap. It might be scaled to fulfull air conditioner outflow hole.…
This is a steam deflector for the Instant Pot Duo Crisp pressure cooker. The dimensions of the vent it's made for are 30mm diameter at the base & 28mm at the top. I have also posted the parts used to make it so if you want to remix it for…
40mm Fan Deflector for Type A Machines Series 1 3D Printer Comes in a six-fin design and an eight-fin design. 50 degree deflection No supports required Edit: added a thicker, redesigned 6-baffle deflector.
You will need to print this like the photo. Vertical. I do 80 percent infill with normal support on the bed only.
Originally something I designed for my boss to use in a small bathroom with limited space for ductwork. Design has a 3 inch connection to join with a 3 inch output and the main deflector body is 4 inches in length, 3.25 inches in height,…
DESCRIPTION Control Surface Deflection Gauge for sailplane PRINTING SETTINGS See print profile inside .3mf file for detail
Couple of brackets to build an air deflector for an air conditioner. I used a piece of thin plexiglass I had lying around, but a folded piece of paper should do as well. The brackets are mounted using double-sided tape.
I wanted a speaker deflector for my G90 that was low profile enough to fit in a pack and also be the same height as my Ham Gadgets Ultra Pico Keyer, this is what I came up with. No need to take the radio apart for install, but you will…
Creality Space Pi “See-Saw” Heat Shield / Deflector spacepi This “See-Saw” heat shield and deflector is designed for the Creality SpacePi filament dryer . Benefits Easy spool access: The see-saw design allows you to shift the spool…
Helps keep the wind down at highway speeds in the cabin, when the top is down. Recommend construction in at least 6mm clear acrylic. I attached mine to the roll bars with black reusable zip ties.
Redirects the air straight up instead of out. The longer model is for the three center sections, the shorter model goes on the ends. There's a slight gap at the very ends because the outer edges aren't perfectly vertical. Though they…
Steyr Aug shelldeflector print with 100% infill and glue and screw it on your Airsoft-AUG
Deflecting PC Fan Shroud Motivation I was using the original model, until i tried to mount two of these shrouds side by side and realized, that this is not possible. While remixing it, i thought, i could make it even more customizable. So…
Remix of the original Eibos filament dehydrator deflector design. Through physical testing, I created a much smaller design than the original. Reduction of the thermostat does not reduce the voltage to the heating element, therefor the…
One thing that annoyed me on the G9 vacuum cleaner was the air direction of the motor cooling. It directs the air towards the surface that you are vacuuming, blowing away the dust. Especially when you use the small mouth piece. So I made…
Easy to print and stick on. These High speed anti-buffeting wind diffusers for Porsche. Specifically designed for the Cayman, may work with others.
This is a parametric/customizable stop block for t-track fences. The presets are for Kreg Trak, which accepts ¼" bolts and is 2-5/8" (66mm) tall and 1-3/8" (35mm) wide. The knobs are sized with very tight tolerances so that the nuts can…
Track Day coming up? Love to cruise with the windows down? These easy to print and stick-on wind deflectors cancel that high speed wind buffeting in the cabin for modern Porsche. Specifically designed for the 718 Porsche Cayman / Boxster,…
These models are modified from the original design of madewithrealtornados https://www.thingiverse.com/thing:6166809 Files included are the 3 bolt mount for both sides. Modified from the original 2 bolt mount. Be aware that you must use…
This stop block is inspired by the John Katz-Moses Universal No Deflection Stop Block, but I added a hinge mechanism to allow for a quick way to get it out of the way without undoing your length of cut setup. I'm very happy with the…
This cover is secured using mounting hardware for the Daylight on a match stick LED. This helps protect from being blinded by the LEDs when looking at print jobs. Update 2025-11-13: Uploaded mounting bracket, I didn't model the Mounting…
V3 added to make it 3.5 inches wide for my wider spool. Also moved the feet toward the middle (Away from edges) so larger spools can fit. I will likely remove versions 1 and 2 after I print V3 and like it. I remixed(Fusion 360) using…
The purpose of a deflector is to bounce back some of the sound straight to the player. This way you can hear more easily the exact sound that you are producing. To assmeble use a short m5 bolt which, as you screw it in, should cut a…
An 80mm fan cover to redirect air flow. One centimeter tall. Screws onto an 80mm fan with typical pc fan screws. Two styles available. Some support may be necessary.
Designed this because our vent blows right at the wall. This redirects the air back out into the room. There are pockets for 6x3mm magnets.
The original version is based on the Katz Moses design . It wasn't labled as such but the original is for the 6030 aluminum extrusion. I have smaller extrusions (4020) around that I wanted to use it with so I created this version. It…
I didn't like the massive options I've seen. ~20g filament & 45 minutes printing. Other designs use upto 400g of filament and take several hours to print. I want the side on my printer clear. The box can be almost anything you choose…
Oh yeah, listen up, brother! When you strut into that firing range, you better be a true macho man, you understand? Oh yeah! Feast your eyes on this 3D printed shell casing deflector – it's not just a piece of gear, it's a declaration of…
Tired of filament poop flying everywhere during color changes? This angled poop deflector is designed for the Anycubic Kobra X to guide purge waste directly into the collection bin below. Unlike a simple vertical wall, the specially…
This is a 3D printable version of our metal wind deflector kit for the Himalayan BS4 (2019). This kit will replace the stock windshield, which often cracks at the fastener holes after some period of time. It is strongly recommended to use…
