Search results: deg

Sort order

3,059 models

P
PrintablesIvo

curve 180degrees hotwheels compatible

update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…

Downloads
1,307
Likes
191
Rating
5
P
PrintablesUko

Yet Another 90 Deg Prusa MK3 Heatbed Cable Cover

I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.

Downloads
1,270
Likes
96
Rating
4.77
P
Printablesclift_d

Prusa Mini+ heatbed connector cover - 48deg longer

This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…

Downloads
923
Likes
229
Rating
4.86
P
PrintablesMartin

New 360 Degrees Protractor centimetre (cm) And Inch

Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch

Downloads
210
Likes
26
Rating
5
P
PrintablesDedoper

Universal Car phone holder and mount 90, 180, 270, 360 degrees tiltable

Car phone holder and mount, universal Vertical for phone calls etc and pull up the pin to tilt the phone left or right

Downloads
152
Likes
30
Rating
0
P
PrintablesThe Mapster

One Sided Small 45deg Double Switch - Brio/IKEA Wooden Train Track

Print as shown in screen shots with flat (non-track) side down to plate.

Downloads
127
Likes
18
Rating
5
P
PrintablesPuka

PTFE connector extended 15deg

Combined Extended and 15deg PTFE connectors

Downloads
103
Likes
7
Rating
5
P
PrintablesMartin

Temperature & Humidity Meter Stand or holder for Prusa i3 MK3 360 degrees

Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…

Downloads
75
Likes
12
Rating
5
P
PrintablesLeon.Reijnders

Sanding Block 90 Degree with Tensioner (OnShape)

This Sanding Block is useful for sanding inner Corners (example Picture Frames). The Lower screw will fix the sanding paper, the upper Screw will tension the Sanding paper. Cut your Sanding Paper into 50mm x 170mm stripes. Printed in PLA…

Downloads
70
Likes
5
Rating
0
P
Printableskostecki

Unifi G4 Doorbell Wedge (90 degree)

None of the existing wedges for the G4 doorbell fit my needs, so i made one that did. This wedge puts the doorbell at 90 degrees to the door for doorbells that are mounted perpendicular to the door. I didn't trust the snap-on mounting to…

Downloads
70
Likes
4
Rating
0
P
PrintablesPGold

Pipe threaded adapter 90 Degree 1" F to 1" M

Printed using ePLA. use support as in the attached bgcode or use your own.

Downloads
69
Likes
8
Rating
0
P
PrintablesNighthawk

90 degree clamping guide

Small 90 degree clamping block for spring clamps, used to align ribs while building balsa RC plane wings or other smaller items. Clamp is 1.25" square and 0.5" high. The small round pad it perfect for a fingertip to hold the clamp in…

Downloads
67
Likes
8
Rating
5
P
Printablespetr.vyleta

Eureka Mignon Specialita Tilted Base 10/12/14deg

The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…

Downloads
60
Likes
5
Rating
4
P
PrintablesBigH

TexRC KerbTex Medium Radius (300mm) 90deg Corner

Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…

Downloads
59
Likes
7
Rating
0
P
PrintablesPGold

Threaded Pipe Adapter 90 Degree 1" F to 1" F

Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.

Downloads
59
Likes
11
Rating
0
P
PrintablesZdeněk

All-in-one 45-, 90- and 135-degree Formwork Template (a.k.a Octagon Template)

Templates to easily join boards at a desired angle. Multiple versions are available for different board thickness. You can get away with the thickest one if the desired precision is not excessive, or you can print multiple versions if…

Downloads
58
Likes
23
Rating
0
P
PrintablesSurfalex2000

Cleaning with cold pull->220degrees->235degrees->250degrees->260degrees->100degrees--> PULL

IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…

Downloads
55
Likes
17
Rating
0
P
PrintablesShmoee

ocarina mouthpiece that changes the angle by 45 degrees

I designed a slip-on mouth piece for this particular ocarina in Fusion 360 that changes the angle of this Ocarina mouth piece by 45 degrees to make it more comfortable to play. I printed my ocarina at 80.7% scaling (Eb tuning) so I…

Downloads
55
Likes
7
Rating
4
P
Printables3DJay

2020 aluminum extrusion 90 deg connector

90 degree corner for 2020 aluminum extrusion. I used this for my diy printer.

Downloads
50
Likes
6
Rating
0
P
PrintablesEpiales

90Degree Curve String Art with Stand

A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…

Downloads
46
Likes
5
Rating
4
P
Printablesjanek

90 degree edge sanding jig

All on one plate. Main body printed on side , bracket layed flat, both with tree supports. Hardware required: M5x60 hex bolt DIN912 x 2 M5 connecting nut DIN6334 x 2

Downloads
45
Likes
9
Rating
0
P
PrintablesAlvomane

Grid Mounting Plate for JOYCUBE Fischer E-Bike Charger Holder | Gitter Montageplatte für JOYCUBE Fischer E-Bike Ladegerät-Halter

The mounting plate allows the excellent charger holder for the JOYCUBE Fischer e-bike charger from Wolf Flow/db1337 to be attached to a grid with M3 screws and nuts. Print the mounting plate in STL orientation in 0.2-0.3mm layer height…

Downloads
25
Likes
7
Rating
0
P
Printablesdradam

180 degree Pivoting J1772 wall mounted charger holder

Swinging J1772 bracket that allows you to lay the charger flat against the wall and swing it out as needed. Printed in PET 40 % but may go higher depending on longevity. Prints in place as one object. A little crunchy in the joint as the…

Downloads
22
Likes
4
Rating
0

Photovoltaic cable protector - 90 degrees

EN: Protection of photovoltaic cables with a diameter of 6-7 mm against penetration or breakage when routed through wall edges, metal roofing, etc. I recommend printing with supports in vertical position. CZ: Ochrana fotovoltaických…

Downloads
22
Likes
5
Rating
0
P
PrintablesPapyjo

Lego pare brise vintage 4x3 45 degré

Il me manquait cet élément pour terminer ma vedette de police. Impression en PETG avec filament clear. Hélas la couleur et la transparence ne sont pas là, mais la fonctionnalité est respectée J'ajoute le fichier fusion si vous avez…

Downloads
17
Likes
3
Rating
0
P
PrintablesKevinP

Cover for UGREEN 130W Autoladegerät

Cover for UGREEN 130W Autoladegerät .

Downloads
16
Likes
0
Rating
5
P
PrintablesScrap King

Kings 270 degree awning support

Kings awnings have a habbit of getting droopy, as thier knuckles can bend a bit over time, which leads to the bag they live in when stowed riding lower than when first fitted. In my case, as it was mounted on my van, it would bash into…

Downloads
15
Likes
2
Rating
0
P
PrintablesAttishu

Camera / TV VESA Wall mount 10 and 20 degrees tilt

Did you mount your Camera on the wall to record your work? The camera need a little extra tilt? Print this! In my case the DSLR camera is monted to record Youtube videos on our engineer station. But the camera was not in the right angle,…

Downloads
14
Likes
5
Rating
0
P
PrintablesMagicShrimp

270 Degree Hinge for Elegoo Centauri Carbon

Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…

Downloads
9,744
Likes
1,137
Rating
4.9
P
PrintablesAlex_cf_Siu

270 degree Door Hinge for Creality K1

[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…

Downloads
8,739
Likes
753
Rating
4.8
P
PrintablesIceman

Any Size Parametric 90 Degree Shelf Bracket / Corner Bracket. Imperial & metric!

This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…

Downloads
7,842
Likes
2,265
Rating
5
P
PrintablesDivixolin

Elegoo Neptune 4/4PRO Cable Chain (New 90deg mount & Z mount to connect chain)

Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…

Downloads
4,978
Likes
400
Rating
4.5
P
PrintablesSHaDoW6

K1/K1 Max 90 degree Bend

Made this 90 degree bend to prevent the bowden tube on the K1 Max from rubbing under the lid, it also provides a cleaner movement of the cable chain. It's loose enough that it shouldn't cause any problems with under extrusion. Made…

Downloads
4,286
Likes
461
Rating
4.92
P
PrintablesRobSmo

Drill and Screw Guide 90 degree

Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…

Downloads
4,066
Likes
2,126
Rating
4.66
P
PrintablesDiablo

270 Degree Geared Hinges (V2) for K1/K1 Max/K1C. Easy print option. Not print in place.

I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…

Downloads
3,680
Likes
726
Rating
4.57
P
Printablesshuymn

Elegoo Centauri Carbon 10-Degree Door Holder

This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle. Purpose Provides slight ventilation for the print chamber when…

Downloads
3,458
Likes
407
Rating
4.83
P
PrintablesVomDeich

Corner Clamp 90deg 5-15mm

This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…

Downloads
3,458
Likes
1,833
Rating
5
P
PrintablesUfoprint

E-Bike Ladegeräthalter für Bosch 4A Charger Smart System

Wandhalterung für den Bosch 4A e-Bike Charger (Smart System ab Modelljahr 2022 BPC3400), Befestigung mittels 2 Senkkopfschrauben ø 4mm.

Downloads
3,238
Likes
227
Rating
5
P

Parametric corner cable holder (90degrees)

Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…

Downloads
3,091
Likes
2,234
Rating
4.93
P
PrintablesVlad Grigore

3D Multi Angle Measuring Ruler 45/90 Degree, Carpentry Square Protractor Drawing Line Ruler Miter Triangle Layout Tool

Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…

Downloads
3,005
Likes
876
Rating
4.78
P
PrintablesBlackFury

Drill Guide - Metric - 90/45 degrees and corner

This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…

Downloads
2,891
Likes
444
Rating
4.96
P
PrintablesEB3D_Printing

90 Degree Bracket for 2020 Extrusion for Ender-5, Pro, Plus

This is a remix of: https://www.thingiverse.com/thing:3644062 I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and…

Downloads
2,787
Likes
468
Rating
5
P
PrintablesBrady Boots

Hot Wheels 90 Degree Curve - With Legs

Still requires print supports on the part where the hot wheels track clips in.

Downloads
2,476
Likes
288
Rating
4.22
P
PrintablesVincent

Prusa i3 MK4 and MK4S Heatbed Cable Cover 60 Degree (60°) for Enclosures

TL;DR: Print the top, print one of the two bottom parts, and optionally print the cable holder. This heatbed cable cover and holder is based on the original Prusa part. It keeps the exact dimensions for hardware, LED viewing window, cable…

Downloads
2,395
Likes
479
Rating
4.96
P
Printablesplasmarob

Hot Wheels 90 Degree Turn Track

My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…

Downloads
2,288
Likes
286
Rating
4.64
P
PrintablesIAmAnEngineer

Ender 3 V3 SE/KE 90 Degree Angle/Stabilizer

!!Important!! I highly recommend straightening the Z-Axis gantry before doing this mod, as explained here . The Ender 3 V3 SE/KE faces a significant issue with a wobbling frame, which can result in serious quality problems, especially at…

Downloads
2,271
Likes
449
Rating
5
P
PrintablesUlle

LED Strip profile 45 Degree

I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…

Downloads
2,269
Likes
766
Rating
5
P
PrintablesIPIND 3D

Prusa MK3S Improved 45 Degree Fan Shroud

Based on the original Thing from K_Lab - thanks for the source Fusion 360 files: https://www.thingiverse.com/thing:3533859 and the remix from Theo Tinjum:…

Downloads
2,074
Likes
364
Rating
4.89

AR Pistol Grip 5 Deg Cant

Needed a grip that was more vertical. This works. Print it upside down, minimal support need for grip cutout area. If someone is more capable than me, it needs some texture added. I printed with low resolution to simulate texture. It's…

Downloads
2,073
Likes
169
Rating
5
P
PrintablesTol

The SMALLEST Protractor for CAD modelling (0.1 degree precision angle measurement tool)

Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…

Downloads
1,948
Likes
264
Rating
4.97
P
PrintablesDopins

Minisforum DEG1 eGPU Dock Enclosure / Case / Shell

I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…

Downloads
1,843
Likes
134
Rating
5
P
PrintablesKYZ Design

270 Degree Door Hinge - Designed for 3D Printing

I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…

Downloads
1,685
Likes
519
Rating
5
P
Printablesoriddlero

Tool Trays - Prusa MK3S Right & Left Side w/ Honeycomb, PRUSA logo & 45 Degree Matched OEM Front

The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…

Downloads
1,682
Likes
402
Rating
4.93
P
PrintablesTol

Professional Protractor for CAD modelling (0.025 degree precision angle measurement tool)

I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…

Downloads
1,643
Likes
347
Rating
4.96
P
PrintablesJJengineering

HotWheels - 90deg curve and connector

Material: PET-G Layer high: 0.2mm Perimeters: 4 (5 for connector) Infill: 30% Cubic Holes for connectors are blind because of reliable printing. Drill them by 5-5,5mm drill. Big square is modifier - you can set bottom layers to 0, it…

Downloads
1,487
Likes
206
Rating
5
P
PrintablesHaro

K1 270 degree geared door hinge

need 4x m3 insert nut

Downloads
1,466
Likes
137
Rating
4.64
P
Printablesidgmo

Drill Guide - 45 & 90 Degree

This is a drill guide to aid in 90 deg and 45 deg drilling. Diamond cutouts are on either end to aid in finding measurement lines. The 45 deg guide will intersect at the the center line. All holes accommodate imperial bits. Please be safe…

Downloads
1,335
Likes
219
Rating
4.64
P
Printablestimqui

Small 45deg Double Switch - Brio/IKEA Wooden Train Track

Basic 45° small double switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT…

Downloads
1,317
Likes
239
Rating
4.89
P

reolink doorbell mount 35 40 45 degrees

i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…

Downloads
1,294
Likes
78
Rating
5
P
PrintablesDiablo

K1C (and later K1) adapters to fit my (V2 & V3) 270 degree door front hinges

Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…

Downloads
1,259
Likes
140
Rating
5
P
PrintablesVinors3DLab

45-Degree Tilted Office Pen Holder

Modern and functional desk accessory designed for FDM 3D printing. The 45-degree tilted body and geometric perforated structure provide quick access to writing tools while maintaining a clean, contemporary aesthetic. ☕ Personal &…

Downloads
1,243
Likes
428
Rating
4.75
P
PrintablesMeili

Wallholder charger audi etron wallmount ladegerät wandhalterung

Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…

Downloads
1,226
Likes
64
Rating
4.86
P
Printables3DRA

Creality K1 MAX PTFE guide 90 degrees

90 degree PTFE tube guide. Together with the guide, I used https://www.crealitycloud.com/model-detail/657e19d8937557724252afab , reducing the height to 50% and https://www.printables.com/model/734259-creality-k1-k1-max-ptfe-tube-holder I…

Downloads
1,221
Likes
111
Rating
5
P
PrintablesBukken

90 degree Holder for type 2 EV charger connector

Holder for Type 2 charger cable where the cable come in from the side, better fit how the cable is looped around the holder. You may want to print this with supports. Edit: I've added a picture of the areas that you may want to have…

Downloads
1,215
Likes
107
Rating
4.92
P
PrintablesKillerN00bz

PETG Temp Tower for CURA 220-260 degrees

This is just a remix of cuzzea's work, eliminating the colder temps that won't work for my PETG (Hatchbox). This one goes 220-260, use cuzzea's exact instructions for setting up the post processing script. Nothing changes except the top…

Downloads
1,206
Likes
28
Rating
5
P
PrintablesUncleFrankSays

UFS-069 Try Square & Corner 90 Degree Right Angle Clamp

This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…

Downloads
1,181
Likes
178
Rating
4.86
P
PrintablesMartin
Downloads
1,159
Likes
170
Rating
5
P
PrintablesMartin

Semi Circular Protractor 180 Degree Angle, Ruler Centimetres & Millimetres

Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm

Downloads
1,149
Likes
80
Rating
5
P
PrintablesHaro

Creality Ender3 V3 SE Spool Holder 90 degree rotating Adaptor

The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…

Downloads
1,136
Likes
95
Rating
5
P
PrintablesLloyd

270 Degree Hinge/Cover and Bed Holder Remix for Elegoo Centauri Carbon

This is a remix of the right hinge from MagicShrimp's 270 degree hinge for the Elegoo Carbon Centauri. It is literally a mash of the hinge and the right holder from Julien Mairy's cover and bed holder. I wanted to have both, but they…

Downloads
1,128
Likes
149
Rating
5
P
PrintablesMartin

Protractor 360 Degrees

360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm

Downloads
1,116
Likes
66
Rating
5
P
PrintablesJohn Wayne

drywall 45 degree cutter, strug do płyt gk 45 stopni

Device for 45-degree chamfering of plasterboards in drywall. Small and convenient to useAll trapezoidal blades up to 62mm fit. Chamfer width +- 6mm. The nut works easily after the first screwing in. In the slicer, the model must be…

Downloads
1,113
Likes
183
Rating
5
P
PrintablesJustin Lauck

Lego Wreath 60 Degree Assembly Jig

I love the Lego Wreath and I am in the process of printing more for Christmas. I needed a jig to align my 6 segment wreaths at a perfect 45 degrees. I traced the original Lego wreath branches to make this jig.

Downloads
1,109
Likes
225
Rating
5
P
PrintablesPython-1

60 degrees heater bed cable cover

Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip

Downloads
1,096
Likes
147
Rating
4.93
P
Printableskieran philpott

Bambu A1 20 Degree Tilt Block For Auto Ejection

Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill

Downloads
1,076
Likes
59
Rating
5
P
Printablestimqui

Small 45deg Switch - Brio/IKEA Wooden Train Track

Basic 45° small switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT other…

Downloads
1,049
Likes
172
Rating
4.86
P
Printablesthall72

Lego Compatible (32034.dat) Technic Angle Connector #2 (180 degree)

This model is compatible with the lego system.

Downloads
1,046
Likes
85
Rating
0
P
PrintablesMeuon

Kitchen Knife Sharpening Guide 17 Degrees

Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety…

Downloads
1,039
Likes
474
Rating
5
P
PrintablesCraig Andrews

High Quality Keycap Printed at a 45 Degree Angle

My new keyboard came without keycaps so I decided to make some. Through a lot of trial and error, I learned how to create some nice keycaps - and that's what this model does. You can learn more about how I arrived at this point and some…

Downloads
1,039
Likes
59
Rating
5
P
PrintablesPaetur

Radegast statue

Reupload of a model from Pavel_Sticha (https://www.thingiverse.com/thing:3831760).

Downloads
1,032
Likes
90
Rating
5
P
PrintablesRamathorn15

P1P, X1, X1C 90 Degree X and Y Axis Holder / Jig

I read somewhere that people have had success with removing ghosting/belt lines by positioning the X and Y gantry at 90 degrees during the belt tensioning process. I decided to make a quick model to help hold the gantry in position during…

Downloads
1,028
Likes
248
Rating
4.87
P
PrintablesMagicShrimp

Extras for 270 degree hinge

Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…

Downloads
1,004
Likes
104
Rating
5
P
PrintablesDiablo

K1 Max/K1 /K1C. 'Vorlon' Door catch. For use on printers with 270 degree hinges fitted

If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…

Downloads
1,001
Likes
242
Rating
4.9
P
PrintablesTuomas

90 Degree Clamp

The 90-degree clamp is an essential tool for any woodworker. This 3D printed clamp is designed to hold pieces of wood at a perfect 90-degree angle, making it ideal for creating precise joints. Whether you’re building picture frames,…

Downloads
993
Likes
443
Rating
0
P
PrintablesSmarThuis

ring video doorbell wired wedge 45 degree

Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…

Downloads
987
Likes
54
Rating
5
P
PrintablesHands on Katie

140mm fan cover - 30 degree twist

I made a fancy fan cover which is designed to optimise airflow. Testing video below explains more! You might also be interested in the 140mm fan insert for tights/pantyhose .

Downloads
959
Likes
418
Rating
5
P
PrintablesWireheadarts

OpenSCAD Parameterized Honeycomb Storage Wall 90 degree joiner

I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty…

Downloads
947
Likes
284
Rating
5
P
PrintablesDiablo

270 degree hinges (V3) magnetic faceplates upgrade

TLDR:- New Hinge design (V3) allows for quick change V3 face plates/covers while Using V2 additional V2 components for the hinge assembly. New optional tools added. Also includes post processing and detailed assembly instructions (with…

Downloads
900
Likes
133
Rating
5

30°, 45°, and 60° Degree Clay Bevel Cutter Tool

A pottery clay tool designed for quick and precise cutting of clay at 30°, 45°, and 60° degree angles. Things you will need: 4x 4-40 brass heat set PEMs 4x 4-40x.25in screws An old guitar string or stainless steel braided wire both work…

Downloads
894
Likes
134
Rating
5
P
PrintablesSilson07

Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid

Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid

Downloads
856
Likes
74
Rating
4.86
P
Printablessteriku

Bestway Power Steel Pool 90-degree outlet

I couldn't find the 90-degree adapter for the Bestway Power Steel pool so I made one. The threads for the connection for the pool seem to be non-standard so I custom-made the threads. The threads are ~109mm in diameter. The 90-degree…

Downloads
855
Likes
70
Rating
4.67
P
Printablesthall72

Lego Compatible (32016.dat) Technic Angle Connector #3 (157.5 degree)

This model is compatible with the lego system.

Downloads
854
Likes
58
Rating
0
P
PrintablesVanDerPol

Makita Charger Holder/ Makita Ladegeräthalter

The attachment for the charger is self-explanatory. Remove the rubber feet and then insert the holders and screw them tight. Die Befestigung für das LAdegerät ist selbst erklärend. Die Gummifüsse entfernen und dann die Halter reinstecken…

Downloads
824
Likes
111
Rating
4.33
P
PrintablesMike

Logitech Feet for a K850 Keyboard (4 and 8 degree)

I accidently broke my feet on my keyboard, Logitech K850. I couldn't find replacement parts so I modeled these using SketchUp and created the STL files for both the 4 and 8 degree feet. Support is needed for the the pin alone.

Downloads
810
Likes
30
Rating
5
P
PrintablesNico Smit

45deg Iron-Sight (picattiny)

Zeros to about 50m but Elev. and Windage is adjustable. Requires: 1x M2x~10mm 1x M3x~23mm + nut 2x M5x~25mm Not all picattiny is manufactured within the same tolerances thus sanding may be necessary.

Downloads
807
Likes
99
Rating
5
P
PrintablesS3DP

Simple Bench Top or Side Mount Filament Spool Holder - One Piece 360 Deg Rotation With Guide

I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own. I designed with a lattice structure so you can get away with the lowest amount of plastic but is still pretty strong. It is…

Downloads
795
Likes
83
Rating
4.71
P
PrintablesSteveJohnsen

Center Marker Finder / Gauge / Template, 90 & 45 Degree Square & Protractor, for Dowels, Square Stock, etc. - UPDATED: 6 Slots Widths

UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…

Downloads
790
Likes
116
Rating
4.73
P
PrintablesJernejP.

GoPro 90 degree arm extension mount - No support - 25mm, 50mm & 100mm

Orient the parts so the flat cut end is on the bottom than print with no supports.

Downloads
785
Likes
77
Rating
5
P
PrintablesCryostatic

Snapmaker U1 - 180 Degree Door Hinge

The door on the Snapmaker U1 doesn't open much further than 90 degrees by default, and I wanted less restrictive access, so I put together this 180-degree door hinge. It uses compression-style fittings to hold the glass door to the hinge…

Downloads
779
Likes
220
Rating
4.71