4,398 models
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This is a divider for the Ford Maverick rear under-seat compartment, it utilizes the Ford FITS integrated mounts. The design is comprised of two main parts, the divider and the FITS brackets. The brackets bolt on to the divider using…
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Bonjour, vous trouverez les 22 pièces du robot BD-1 en 22 fichiers séparés pour une impression en plus grand ou pour juste imprimer une pièce à la fois modèle original Star Wars BD-1 Droid Kit Card Hello, you will find the 22 parts of the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This divider fits the Stanley FatMax professional organizers. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20%
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Description This is the knife/throwing knife from the game Helldivers 2 Printing: Nozzle : 0.4 mm Layer height : 0.2 PLA supports needed
Print approx. €4.81–€5.87 excl. taxPreliminary estimate for one variant
This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Furthermore, explore my alternative model: https://www.printables.com/model/638685-divider-diy-storage Suggested print settings: No supports are needed but follow the suggested print orientation for ideal results. "Honeycomb Drawer…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Print approx. €10.14–€12.39 excl. taxPreliminary estimate for one variant
Support structures are not required. Use at least 3 perimeters for times when the gameplay is heated and dangerous for plastic parts. I also added Prusa mini code since the original part needs a bit of work to get it to scale to Mini bed
Print approx. €23.71–€28.98 excl. taxPreliminary estimate for one variant
Since there is never enough space for various small things and tools for the printer, I decided to modify the already remixed Prusa MK4 Toolbox model from author S3BR4 , which I liked the most, to be used on the left side. While I was in…
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
Printed with PLA on a Sovol Sv06 plus
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
it is a Little Experiment. This Video Explained how it works. (Not my Video ;) ) All you Need is Filament (works Fine with PLA and PETG ) a PETG Bottle and one or two Paper Clips. Put the Paper Clips through the small hole to get the…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Add more slots to your Minimal Stand with this divider. The Divider is 5mm thick, please adjust the peg's length accordingly. Prints Settings: Supports: Tested with no support. Layer height: Tested with 0.2mm. Infill Pattern: 3D…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
This is an individual tray for cards that can be used in board games like as Settlers of Catan (Devir version) or Hare & Tortoise. Esta es una bandeja individual para cartas que pueden usarse en juegos de mesa como Colonos de Catán o La…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Here are several different kinds of parts organizer drawer dividers. They're listed as Width x Height (in mm) to make it easy to find the ones you need. They fit a variety of manufacturer's bins, including Akro Mills, Stanley, Craftsman,…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Simple but solid rubber hammer holder. Ø 62mm. Width on the hammer handle - 28 mm. Joint holes are 3.5 mm
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
Card divider for standard size (~66x93mm sleeve) ccg cards. Prints in downloaded orientation and uses a small amount of filament.
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Keep your fridge tidy with this simple storage divider! Designed to separate items like bottles, sauces, snacks, or leftovers on fridge shelves. just print and slot it into place, no tools needed, and works with most fridges but designed…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
Son unos conos muy entretenidos y para pasar el rato
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
This is meant to connect the divider panels in the original model. The length is not long enough for a typical bag so, instead, I printed three panels and four rods. The middle panel has a rod inserted half way from both sides. It's…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
This will let you use the mini-bins from @RobertONeill_540978, while still organizing the space underneath. These should fit snuggly into the bins from Dewalt's Toughsystem organizers. There is a separate model if you want to split the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This bullet journal template has bullet markers (17.5mm from edge) and common shapes used for marking notes and organizing your journal pages. It also has convenient markings dividing a page into a number of evenly spaced rows or columns.…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
A sink rack to hold you spunge and accessories on a split sink. The space between the pockets is about 1.6 inches. Printing Print upside down. No supports required at 0.2 layer height. Infill and wall at your discretion. Enjoy! And If you…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Background I picked up a Hardinge dividing head and it only came with one dividing head plate. To get other divisions I modeled four of them based on the factory indexing hole count specifications and measurements from my single dividing…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Hardware for social distancing in-classroom setups. Additional hardware needed for shown sample: 8x 1/2" PVC Elbow fitting 4x 1/2" PVC Side Elbow fitting 1x PEVA Transparent shower curtain 5x 1/2" SCHD40 PVC Pipe @5' (cut into 20"…
Print approx. €15.12–€18.47 excl. taxPreliminary estimate for PETGSource material: PET
A simple, lightweight clip-on shelf divider for some 5mm glass shelves. Based on the design of the wire ones you can get from The Container Store, but I didn't want to try the metal on glass shelves. Created in OnShape; there's a larger…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
This is a companion to my Downspout gutter diverter for rain barrel , which allows you to send the overflow of the rain barrel back into the gutter for easier management. There is currently one size available, but message me if you'd like…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Designed to fit inside of the 70mm tall x 27mm diameter pill bottles. The divider lets you keep a small supply of pills, with 7 day labeled compartments.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Exact same version of the Remixed source, but in 3mf file format. Parts are Pre Broken down.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I recently had the need to add overarm dust collection to my sawstop CNS I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose…
Print approx. €13.92–€17.02 excl. taxPreliminary estimate for one variant
The divider is designed for a 200mm slot, but you can scale it in length for any other slot size :-) I printed it in 0.2mm layer height, thats sufficient for my use.
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
This is a sticker divider for the generic nail polish racks you can buy off Amazon, AliExpress and etc.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A chibi-style diver. Free standing. Best printed reclining at 45-degrees with organic supports.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
I love the Gloomhaven organizer by TowerRex but it doesn't come with nearly enough dividers for all the cards. E.g., I like to put dividers between the monster ability cards to keep the monster types separate. Print instructions…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Drawer Remix 4 square dividers for the low handle drawer to fit the resistor box found here : https://www.thingiverse.com/thing:3125601 or https://www.prusaprinters.org/prints/7643-various-size-stackable-resistor-storage-box
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Large and small drawer dividers for 30- and 39-drawer cabinets. Fits these cabinet models: Craftsman CMST40730 and CMST40739 ArtBin 6830PC and 6839PC Stanley Tools STST40730 and STST40739 Black+Decker BDST40730FF and BDST40739FF FILES…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple mount for Shearwater Dive Computer to DiveX Black Tip Scooter. There is two holes on the side that you use Bungee Cord to strap it onto the Scooter. The curvature of the Mount is set for Black Tip (168mm). Print using…
Print approx. €6.00–€7.34 excl. taxPreliminary estimate for PETGSource material: PET
Scuba save-a dive o-ring set for most common sizes (11 slots) AS003 AS010 AS011 AS012 AS013 AS014 AS015 AS111 AS112 AS116 AS214
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Although I have since found similar on prusaprints my remix came from https://www.thingiverse.com/thing:2918462/files. Again looking for individual holders for my various and individually purchased screwdrivers to mount in a small area.…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
The Ikea Uppdatera cutlery organizers have some quite long sections, which could be shortened for additional storage. Some sections have straight, some slanted walls. These dividers are used to restrict movement of stored cutlery when you…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
This box hangs on the edge of a basket, holding crayons, pencils, and whatnot, alond with a laminated card the full width of the box. Print without infill, and with no solid bottom layers. Give it just enough solid top layers that, where…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Dividers for a Organizer / Fishing Box from Zite Fishing (Finesse Drop Shot Set) If you like my model(s) please leave me a like to support my work. Thank you!
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
I made this model after breaking both of the dividing rings in my lamp. the centre ring doesn't clip on, but still provides plenty of stability. You will need supports for the under side of the rings! You can get different effects…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
This is a diviner who has been horribly injured in the past but was then blessed with the gift of foresight. The final picture is a Blender render. Print with supports. I printed this at 0.12mm layer height. If the scaling is weird just…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Both large and small dividers for the Ryobi Link SlotBox PETG suggested because garages/cars get hot Supports required Don't have a 3D printer yet? That's OK, order already printed from… https://jpelectron.etsy.com
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
these are weird earrings. a spiral wrapped thing that could be a condom as well as a chess piece. no, it's not a creation of artificial intelligence, it's just an attempt that somewhere in the middle of the process went towards failure.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
With my Fintorp Utensil Holder I wanted something that would keep brushes separate making them easier to grab. This is too parts to make printing easier, and they stack with alignment to ensure the holes are directly above each other.
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for one variant
All the models I found didn't fit tightly enough, so I create my own version. The photo shows a comparison with the original divider.
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Hello, fellow makers! As a big fan of Karel Zeman, I’m adding a model of the bicycle diver from the film Invention for Destruction . The model was created using AI, so it’s not perfect. The helmet is printed separately, so it needs to be…
Print approx. €3.24–€3.97 excl. taxPreliminary estimate for PETGSource material: PET
Storage Box for Lottery Tickets – Sazka / Allwyn (with Divider) Practical storage box designed for organizing and storing scratch lottery tickets from Sazka (now Allwyn) . The box includes a removable divider that allows tickets to be…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
Made a divider for my hardware bins. I'm sure they will fit any but the box I have is an HDX brand, as shown in photos. I printed using “vase” mode because I'm not concerned with strength but it used less filament.
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Projekt má za cíl spojit český jazyk a modelování pro 3D tiskárnu. Žáci budou mít za úkol vytvořit své vlastní postavy ke stínovému divadlu.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Fits my Tooltray for Lathetop . Pressfit - if loose glue in place. See also additional Hexkeyholder
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
This is to divert the exhaust on my Neeto Vacbot. I noticed after a pass it just blows all the missed dust around. With this iteration it will need to be attached after leaving the charging station and then removed for charging. I will be…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant
Děti vytvoří figurky magnetického divadla, které si sami navrhnou. Figurky budou mít ve spodní části umístěný magnet a budou ovládány druhým magnetem, zasunutým v ovládací tyčince.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Tvorba postaviček pro školní divadélko jako praktické seznámení s programy pro tvorbu 3D tištěných modelů. Studenti se seznámili s programem Tinkercad, PrusaSlicer a ovládáním 3D tiskárny.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A 1:12 and 1:48 scale Helldiver miniature! This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: https://patreon.com/galacticarmory The full set is also…
I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Spread managed democracy across the galaxy and display your allegiance with this Helldiver Dogtag approved for FREE download from the Super Earth Ministry of Truth. The SELLING of this print is NOT APPROVED by the MINISTRY OF ARMED FORCES…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Divided Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
Parametric Model Maker: I’ve created a parametric version of this model using the Parametric Model Maker, offering an even simpler way to customise the length to your needs without any 3D editing software. Give it a try here:…
This adjustable set of drawer dividers comes in two heights, 50mm and 70mm, and various lengths from 200 to 520mm. For one divider you have to print two "HxL_TWall.stl" and one "HxL_Connector.stl" file of the same height. The first number…
This is a home decor model, it is a divine and mortal statue that can be also gifted to someone. I am not the original owner, this model is a remix. The original photo has been kept because the changes aren't visual, they are for the…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
The Model is scaled to MY head. You will need to make your own measurements and scale it to yours. I have a big head so you have been warned. The parts have non manifold edges you will have to right click them and repair them in the…
This is the 2019 Bugatti Divo, a mid-engine French track car that replaces the Bugatti Chiron. This was modeled using Blender 2.79 over about 70 hours. I will soon be adding files optimized for scale 3d printing. I'm still new to this, so…
Eagle back from the nest! Help spread managed democracy throughout the stars, by printing out and assembling this model kit! Based on the Eagle multirole fighter from the video game Helldivers 2 . A fairly detailed model compared to past…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
Helldivers skin adapted to Dummy 13 frame. The original Dummy 13 frame is required, with these changes: print two more “frame clavicle v3”. replace the “frame neck” with the “short frame neck” version. replace the “frame hips” with the…
This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you can…
A modular drawer divider system that joins the esthetics of 3D printing and woodworking. 3D-Printed parts All printed parts can be customized to meet your dimensions with the parametric ModularDrawerDivider.f3d file in Fusion360.…
This print consists of three main components: White base plate, blue insert and black frame. While using Prusa Slicer 2.6.1 or later this leads you to the PS feature: "Add part → text". For German license plates (Kennzeichen,…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source file: https://a360.co/3vbu9B5 These are perfect for storing small parts and long,…
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
Now you have individual parts to print and assemble. Follow Crazy Creo and me for more designs, and post makes of this master piece that creo made. :)
BD-1 parts kit from fixumdude separated into individual parts files for convenience. Image from https://starwars.fandom.com/wiki/BD-1
This is the second iteration of my Bile Titan print from Helldivers 2
NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…
video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…
Plaque for the 500kg Bomb stratagem UPDATE: 3/4/2024: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
I've made 25 different sizes, so hopefully you will find the one perfect for you.
I designed this deep sea diver helmet from scratch on Shapr3D. It is not an exact copy of any particular helmet but elements taken from several different ones. It is a detailed model and best printed on an SLA (resin printer). Could be…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
![Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.](https://media.printables.com/media/prints/1108868/images/8378877_56cbc877-f33b-4c54-9190-9f20b125a5dc_f708f62b-26d7-4a66-a02a-6a56b3b9d8ee/divider-render.png)
