Wyze doorbell wall mount
This is a replacement wall mount for the wyze doorbell.
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
- Downloads
- 254
- Likes
- 21
- Rating
- 5
733 models
This is a replacement wall mount for the wyze doorbell.
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
The angled mount hole centres suit a Ring doorbell generation 2 model with holes centres of 44mm (width) by 87mm (length). 2.0mm mounting hole may need opening up to suit non-OE screws Recommended lay height of 0.2mm (Speed) and 100%…
I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
Just a Reolink Doorbell Rain Cover. No Supports needed.
This mount allows you to install your Blink Doorbell at a 25 degree angle in a corner. There are 3 different sets of screw holes incase you need to offset the mouting if using existing holes. e.g for wiring.
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
Tilts Reolink doorbell 30 degrees right or left and 15 degrees up or down. Left/Right is from the perspective of the camera. If you want the camera tilted up instead of down, choose the opposite left/right direction. Update: Added v2 to…
I had been just double adhesive taping this thing and realized that since I had an actual working 3D printer I should probably design a mount. I made sure that it can accommodate fairly large USB flash drives and added another 2mm to the…
Bonjour, Je vous propose mon modèle de protection contre la pluie pour la sonnette Reolink Doorbell. J'y ai ajouté un “antivol” en y ajoutant une vis M2x4 à la base de la protection. Contenu: Une plaque murale avec insert pour la…
The protection was created due to the lack of cover from meteorological conditions. The manufacturer recommends covering from rain. For those who use an angle pad, an auxiliary plate must be added between the cover and the angle pad. At…
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
Recently, I got the new 2024 Ring Doorbell that has a little tool to remove it from the house to charge. I figured I'd lose this little tool, so I decided to model my own so I can make another one if/when I lose it. No support needed,…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
EZVIZ DP2 2K WiFi, EZVIZ DP2C, .... Holder for example for a powerbank Fits on hooks The holder does not restrict the removal of the display Print: easy printing supports - no perimeter - 3 layer - 0.2mm filling - 15% gyroid material - PET
The Ring Doorbell 3 comes with a couple of wedges to adjust the angle of inclination and rotation of the doorbell to point it where you need it. However they provide only a limited range of options. 24 combinations of inclination and…
A 40° wedge for the Eufy E340 dual video doorbell, featuring room for wiring. It may also work with other Eufy doorbells if the backplate form factor is the same. The wedge has separate wall and backplate attachment points: a pair of…
Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these. They should print with no supports if you print it with the bottom…
EZVIZ DP2 2K WiFi, EZVIZ DP2C, .... Holder for example for a powerbank + with key hooks Fits on hooks The holder does not restrict the removal of the display Print: easy printing supports - no perimeter - 3 layer - 0.2mm filling - 15%…
Needed some space between the Reolink Video Doorbell and the wall to hide extra ethernet cable. Use M4 screw + nut to fasten the metal holder to the spacer. Printed from PETG, with 25% infill. Fixed rain roof.
A quick, printable way of shifting your wired Google Nest Doorbell out of the way of a wall or doorway. With the doorbell's wide FOV, you'll be able to see it all. This is a Google Nest doorbell adapter for the wired, second-generation…
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
Unifi G4 Doorbell Pro Habe hier ein Halter für die G4 Doorbell Pro erstellt um die alten Schraublöcher zu verstecken. Am besten mit PETG/ABS/ASA drucken um die Haltbarkeit zu gewährleisten Viel Spaß damit
-------------------------------------------------------------------------------------------------------- These are the current mounts: Horizontal: 5,10,15,20,25,30,35,40,45 Vertical: 5,10,15,20 Dual: 5 Vertical, 10 Horizontal Dual: 5…
Presenting the Wyze Doorbell V2 Cover – a minimalistic yet secure solution for enhancing your doorbell's functionality. This 3D-printable cover seamlessly integrates with the original mounting hardware, ensuring a snug fit while…
This is a 70 degree wedge for the Reolink POE Doorbell. It will work with the factory mounting plate. It may work with other doorbells as well. The inside could be cleaned up a bit but that won't be seen once mounted. Feel free to share,…
I needed a cover for my Ring doorbell to protect it from the rain and also need a wedge to increase my vision of my front door. I adapted this model https://www.thingiverse.com/thing:5240779 to have a wedge shape, and also filled in the…
This is a simple cover/weather hood for the Eufy E340 Doorbell Camera with a small hole in the top for the extraction tool. I wanted something low profile that would keep rain and snow off the camera as much as possible without covering…
Exact replacement for the Eufy 2K Battery Only Doorbell (special Costco edition that is battery only with no ability to hard wire). It does not have holes for hard wiring but should fit all Eufy 2K Battery doorbells. Print Settings…
45 degree bracket for eufy E340 Dual Battery Powered video doorbell that uses the existing 54mm #3 screw holes. Print on closed face No support required for some printers. If any, supports painted for recessed rectangles
Due to the included adapter being only flat I've created a siding adaptor made for standard 4" vinyl siding. It keeps the sideway angle of that included spacer. There are two models included depending if you want to install the doorbell…
25/09/21 As per a request, I have created a siding mount. Check it out here: https://www.thingiverse.com/thing:4974117 19/09/21 As per a few requests, I have now added a 45 degree mount. I've also renamed the design from "Nest Doorbell…
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
20°/25°/30°/35° Wedge Mount for the Unifi Doorbell Lite. Base 20° modelled directly from original wedge mount. Warning: The 45° version was custom made for a request, unlikely to be easy/possible to screw into the wall directly without…
Made a mount for parents. Existing door bell was in the corner and a 45 degree mount would cover the entire entry way. Made this so it could be mounted either direction (Left/Right) With this being outdoors, I printed out of PETG and was…
Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…
Go to original for overview https://www.printables.com/model/545103-google-nest-video-doorbell-mounting-bracket-batter
A Ring Doorbell Pro 2 flat mount that wasn't available to purchase from Ring at the time. Based on the angled wedge that came with the doorbell.
The one showed in the pictures is the 60° angle bracket. The other ones (45° & 90°) are also available as downloads. Hardware needed: Heated inserts (2x) M3 (OD 5mm) Length 4mm M3 screws (2x) Length (min. 10mm - max 22mm) Prints perfectly…
Outdoor shell that fits Aqara G4 doorbell for some additional protection from the elements. Not waterproof, but if water does get inside, there's an opening on the bottom, so that water won't be trapped. Work in progress, so I'll gladly…
A friend of mine ask me to extend the cap of the Rain Cover designed by Zkaza.
Printed in black ASA. This is the angle 25 version. I deepened the area for the Ethernet connector, so I didn’t need to cut a large rectangle like they show in their instructions. A smaller hole for the Ethernet cable can be used instead.…
Recommended material: ABS, ASA. I tried to print it with PETG so i will update you with info how long it last.
This is a copy of the mounting plate included in the box with the Video Doorbell Pro! I used it to create a plate to fit in my existing intercom system, replacing the old broken doorbell, but I wanted to save y'all the time of creating…
I needed a tilted support. My camera is installed on the corner of my house's front wall. With this support, my camera now covers my house's front wall. I used 3x4x4 heat inserts for fixing the original support plate but you can also use…
We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd…
An adapter to mount a ring doorbell.
Ring Doorbell Cover Plate which fits battery doorbells 3, 3+, 4, and Doorbell Plus models. Fitment is designed based on the Doorbell Plus model however it will accommodate the models from generation 3. Models are designed with a cutout…
The included wall plate for the Reolink video doorbell only has about a 15 degree angle so doesn't suit a corner position well. This mount will let you attach this fully in a corner while mounting to only one side. As this is outdoor, I…
The Aqara G4 Doorbell uses a digital chime and their solution is to adhere it with a sticker to wherever you want. I wanted to mount it near a outlet but also mount it to the power adapter and not stick it to my wall. I found a mount that…
Needed to replace an old grungy and dated doorbell chime cover. Took measurements of old cover and came up with this. My chime has a little notch the lip in the back can slip into to keep it in place. Measurements are 136x206x53mm
Update V2: Change screw holes diameters from 3mm to 5mm Newbie to 3D printers, this is my first release. I need to improve printing quality so don't judge the pictures. A simple cover for this Aqara G4 video doorbell, with the hole for…
2 variations of the Wyze Video Doorbell Pro Standard Mount. 3mm or 2mm.
Can be printed without supports but i would recommend to use them in the internal cavity. Minimum of 3 wall lines and 15% infill (lines) You need 2 M4 heated inserts to mount the original eufy frame to the new mount. Printed in carbon…
Included are 3 different sizes and 3 different angles of 0 (straight), 15, and 30 degrees. The bracket is symmetrical and can be flipped if needed. You can also add the 15 degree bracket included with the camera to get 45 degrees if…
This mounting bracket is designed to be a form fit for both the aluminum siding as well as the black metal back plate of the G4 doorbell. It is a right-hand mount, but is designed to be mirrorable in PrusaSlicer to get a left-hand mount.…
These mounts allow you to mount the Logitech circle view at a higher angle than the included 20deg mount. These allow for 30deg ,35deg, 40deg, 45deg, 50deg depending on which you download. Mount this to the house and then mount the…
The 15 degree shim that comes with the Eufy 2k wired video doorbell isn't enough to get a good view at a right angle from the wall the doorbell is mounted on. This 35 degree shim gives a perfect angled view. Print instructions Since this…
There are 3 versions: 1. Flat Plate (print with face down and support only on chin and counterbore) 2. Flat Plate with no counterbore (print with face down and support only on chin) 2. 45 degree Plate (Print on the side that will be in…
I had an old zenergy chime lying around the house, and thought to turn it into a doorbell. The assembly uses a TT Geared Motor, and a 5mm bent metal rod, connected with some metal wire, to oscillate the arm and hit the chime multiple…
Mini rain-protection roof for the Aqara G4 Doorbell. Prints without supports in 1h45 (35g of filament). My doorbell has seen some medium rain since I installed it and it is good so far, I can't guarantee anything obviously. The back is to…
My original doorbell faced inwards towards the door. To get a better view of people coming to my front door, I needed to angle the Ring 2 a total of 60 degrees out to get a proper view of my front porch. I also included a version with a 5…
I didn't want to drill in the stairwell to the property and wanted a slim design with good mounting for 3M double-sided tape. It's made for countersunk M4x20 with M4 nut pockets. I was worried it's gonna be hot but i have used it for a…
Doorbell camera wedged designed to improve the camera field of view. Included modes for left or right side installation with pivot angles of 10, 15 and 30 degrees. This was designed for the Simplisafe doorbell camera I have with dimension…
Wall mount for Hikvision doorbell DK-KV8x13, 45 deg. You need four M3 brass heat insert nuts.
I recommend printing the “bell” side as the first layer, we get an clear surface to stick the frame on its factory double-sided tape.
Souhaitant la poser sur un mur exposé aux quatre vents et non protéger de la pluie, je lui est conçu une petite maison qui est adapté avec l'angle de 25° ( v2 et sans angle fichier plat v2) du support fournie avec, ils permettent de…
You are doing me a big favor by clicking the Like button :-) Riser 30mm for Eufy doorbell
Had problem with rain on the doorbell so i designed a simple model to protect it from the rain. It don't cover any view from the camera. It has a hole in the top so its easy to remove the doorbell when its time to charge the battery.
This is a bracket for the Honeywell DCP Doorbell Series. The little hooks on the bracket were broken quite fast so I decided to do a new one. There is already one other model available on thingieverse which was a little loose in my case…
Remixed and resized for the Ring Doorbell 2, no need to remove the doorbell or mounting plate, simply remove the 2 screws holding the doorbell in place, and slide this over, then replace the 2 screws. Extended the hood from the original…
There is a “wedge” version which has a 5% downward angle of the mount so that you can see packages closer to the wall. The non-wedge version does not include the 5% downward angle. You can download the model or edit the model directly in…
Reolink Doorbell Wedges Great for mounting the doorbell to walls that are parallel to the door. This model has the same mounting dimensions as the original wedge from Reolink, both on the wall and the doorbell itself. It includes the 4…
Made a wall mount for standard outlet screws and to attach the mounting plate on it. Angled 26º right and 10º to bottom
Das ist eine Halterung für die Ring Video Doorbell Wired mit einem Winkel von 30°. Klar man hätte auch von Ring direkt eine “Corner-Kit” kaufen welches aber 21€ kosten, was mir für nen Stück Plastik viel zu viel ist… Also habe ich es mir…
I ordered two video doorbells for my front and back doors. As I was trying to install the batteries for the first time, the clip that held firmly in place the plate that covered the batteries broke when trying to remove it. I was refunded…
Replacement button for the Ubiquiti G4 Doorbell... these become quite brittle and ubiquiti dont offer a replacement part. Printed using ABS-like 3.0 Photopolymer Resin from Elegoo.. ----------V2---------- Redesigned the top layer…
Just a simple little sign that says DOORBELL BROKEN - YELL "DING DONG" REALLY LOUD It's meant as a practical joke because anyone with common sense would just knock on the door if the doorbell was broken. It's a small sign measuring only…
This is an extension mount for a Ring Video Doorbell Pro 2. It's a 2 piece extension with a hole to run wires through and mount the doorbell in the jamb instead of the brick molding. Every door and situation is different so I've included…
The is designed to work with the Ubiquiti UniFi G4 Doorbell Pro and use the mount included in the box. The vinyl siding of my house will make it so the doorbell is at and angle so this corrects that. I included the FreeCAD model in case…
45 Degree wedge for the new Ubqiuti G6 Entry doorbell camera. The included 20 degree just isnt enough for my location. Im still not very good at 3D modelling but this item is quite simple, worked very well and fits great. Comes with 2…
Case for my latest doorbell version 3
This practical 3D-printed angle adapter lets you mount a Loxone double frame, including the Smart Doorbell, at a 30° tilt. By adding this slight angle, you can optimize the camera’s field of view or the doorbell’s sensors, ensuring better…
Eufy does not provide this flat plate for smooth flat doorbell mount. This is the cure.
RING doorbell wall mount with house number Drill your mounting holes as required. Use the supplied plate to cover up your mounting screws on the right side. Print your numbers and resize to your liking. I recommend printing in PETG or ABS…
Reolink doorbell mount wedge adjustable left/right and up/down (tilt). See parameters in fusion. Thickness also adjustable. Remixed from https://www.printables.com/model/624146-reolink-doorbell-wedge-adjustable-from-10deg-to-35 and…
These mounts are for the Ring Video Doorbell 3 Plus. When my v1 Ring Doorbell Pro died, I wanted to replace it with the most current version so I ordered the v3 plus. Unfortunately when I opened the box, I found this had 2 mounts (side…
Introducing the Ring Doorbell Pro replacement button. Designed with convenience in mind, this 3D model eliminates the need for complicated repairs. No more opening up your doorbell unit – simply stick it onto the broken one with glue, and…
3D Newbie here with my first ever design from scratch. "Yay me." - London Tipton My family have been training our dog to ring a wireless doorbell when they want to go outside. The problem was putting something large enough for them to hit…
Dutchlap Siding Adapter Plate for the Unifi G4 Doorbell Pro
You can either print it in one piece (complete) or print front and back separately (front and back) - for less supports - and glue them together.
I tried my best with these models from the pictures on their website. :) Hope this helps anyone!
This is a 45° mount for the simplisafe doorbell camera. It has two pass throughs for the wall mounted screws and two for the simplisafe doorbell camera back plate. There is also a pass through for your door bell wires.
Printed with Prusament PETG Jet Black 0.2mm supports are required.