Search results: dual

Sort order

6,465 models

P
PrintablesGijs

Dual Direction Bolt

This bolt allows two different direction nuts at the same time. It makes an interesting fidget toy. Print instructions The bolt was made after seeing this video: And while it's a lot nicer in metal, the 3d printed variant still is nice to…

Downloads
26,818
Likes
7,989
Rating
4.81
P
PrintablesMike

mini Wind-Up Boat Dual Drive - screwless - full 3d printed

I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…

Downloads
4,747
Likes
1,201
Rating
4.46
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Panda

Size: 55mm x 69mm x 43mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: Some parts of the model may need to be glued. Organic support recommended.

Downloads
4,577
Likes
875
Rating
4.94
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Fox

Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.

Downloads
4,430
Likes
1,457
Rating
4.93
P
Printablessquinn

Single & Dual Locking Carabiner (Parametric)

A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…

Downloads
2,465
Likes
614
Rating
4.64
P
PrintablesM4NU

Dual Tensegrity - Connected Structures

These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…

Downloads
2,444
Likes
421
Rating
5
P
PrintablesJD

Pokemon Snorlax Single Extruder - Dual Color

I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…

Downloads
2,303
Likes
634
Rating
4.67
P
PrintablesBTR3D

Dual Playing Card Box

An elegant box for 2 decks of playing cards. You can print with 2 colors like me. Card hole sizes : (but of course, you can scale to what you need) Height: 87.6 mm Width: 62.6 mm Depth: 19 mm

Downloads
1,989
Likes
243
Rating
4.64
P
PrintablesJack

dual folding Wall Hook

wall hook folding out for coats or phones ( print in place ) can also be scaled to 70% (50% for the bold)

Downloads
1,818
Likes
458
Rating
4.89
P
PrintablesINUX3D

TerraPi EVO Dual SSD Case for Raspberry Pi 3 & 4

The TerraPi EVO is a dual SSD case for the Raspberry Pi, that uses the 2.5″ sata SSD drives as the case, placing the Pi board between the disks. It comes only in dual SSD drive configuration. It utilizes the USB 3.0 port to connect a…

Downloads
1,165
Likes
211
Rating
5
P
PrintablesPolymathic

Spiked Lizard (High Resolution/ Dual-Extrusion Remixes)

This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…

Downloads
1,131
Likes
101
Rating
4.86
P
PrintablesTrajan

Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)

This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…

Downloads
1,083
Likes
132
Rating
4.86

The PrusaWatch - Individually modifiable Band / Strap in for watches in TPU

The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…

Downloads
985
Likes
199
Rating
4.89
P
PrintablesSp1y3rS

Playstation 5 Dualsense x2 and Headphone PS5 Clip

Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset

Downloads
861
Likes
109
Rating
4.86
P
Printablesorax

IKEA SKADIS PlayStation DualShock 4 Controller Holder

DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…

Downloads
806
Likes
138
Rating
4.92
P
PrintablesTh3Rom3

Simple Playstation 3 - Dualshock 3 Controller Stand

A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…

Downloads
748
Likes
58
Rating
5
P
PrintablesHenlor

Dual Z Belt Tensioner - Ender CR Neptune Kobra Aquila Gemini XY

This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…

Downloads
741
Likes
119
Rating
5
P
PrintablesGabor Gyarmati

Dual Color Bookmark with Voronoi Roses

A bookmark with roses, print it with filament swapping to get a dual-color print! For extra smooth surfaces, tick in ironing in your slicer!

Downloads
667
Likes
175
Rating
4.5
P
PrintablesAlvomane

Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix | Dreibackenfutter für Revopoint Zwei-Achsen Drehteller

This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…

Downloads
655
Likes
126
Rating
4.25
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Downloads
614
Likes
48
Rating
5
P
PrintablesReveille

Eufy E340 Dual Video Doorbell 40° Mount

A 40° wedge for the Eufy E340 dual video doorbell, featuring room for wiring. It may also work with other Eufy doorbells if the backplate form factor is the same. The wedge has separate wall and backplate attachment points: a pair of…

Downloads
609
Likes
16
Rating
0
P
PrintablesMiguel M.

Dual LED Strip Clip

This is a remix of my own LED Strip Clip https://www.printables.com/model/68805-led-strip-clip This one allows you to mount two strips side by side with a single clip/screw. Great for the undeside of a lack table. Printing Print a few of…

Downloads
552
Likes
236
Rating
4.86
P
PrintablesWiki Fišer

Dualshock - PS4 controler under desk mount

English Simple mount for dual shock or PS4 controllers to put under your gaming desk, or your coffe table. It uses its joysticks as a holding points. Used to hold one controler at a time. To be hones Iam not sure if this may damage the…

Downloads
518
Likes
82
Rating
4.83
P
PrintablesGracro

Dual Asthma Inhaler Case

Just been recently diagnosed with late onset asthma. Sucks giant donkey stones. Anyway I need to carry these two inhalers now, one for daily use, one for when things flare up. I didn't want these to get damaged (happened already) or…

Downloads
482
Likes
190
Rating
4.5
P
PrintablesJPMakesStuff

Dual battery carrying handle compatible with Ryobi 18v

Updated 04/22/2025 Easily carry two 18v batteries, prevent rowdy batteries from tumbling about in your tool bag, option for electrical connections. Prevent rowdy batteries tumbling about in your tool bag! Suggested print settings: -…

Downloads
451
Likes
115
Rating
5
P
Printableskiki-print

Star Wars BD-1 Droid Kit Card Individual parts

Bonjour, vous trouverez les 22 pièces du robot BD-1 en 22 fichiers séparés pour une impression en plus grand ou pour juste imprimer une pièce à la fois modèle original Star Wars BD-1 Droid Kit Card Hello, you will find the 22 parts of the…

Downloads
447
Likes
220
Rating
4
P
PrintablesWolvie

Phone Sound Amplifier Stand (Mono, Dual, Low Poly)

Hello there. I created a Phone Sound Amplifier Stand (Mono, Dual, Low Poly) for everyone, who need practical stand for Your phone :-) I decided and I created this “easy printing” model for everyone. I created entirely by myself and I did…

Downloads
420
Likes
53
Rating
0
P
PrintablesDan

Prusa XL screen guard LCD bumper status bar dual color

Remodeled the whole thing and wanted to give everyone the freedom to do adjustments themselves.

Downloads
393
Likes
75
Rating
5
P
PrintablesToners603

WE / SOCOM Gear 1911 Dual Port Compensator

Hello! This is a dual port compensator for WE Tech / SOCOM Gear 1911 Airsoft pistols. This compensator replaces the factory barrel bushing which allows the barrel to slide through the compensator, as well as sit flush with the slide. I…

Downloads
383
Likes
54
Rating
5
P
PrintablesShoshke

Delta Cooler - Ender 3 V2 dual 4010 blower cooler with ABL support

Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…

Downloads
344
Likes
72
Rating
5
P
Printables3dMonster

Dual blade for MMU2S. Cut to both sides at all stops.

Warning: This piece is not stock. It has special dimensions, it needs an adjustment of the selector stop positions, in the MMU2S firmware. Is this moment I use: "MMU2S-TZB 3.0.3" firmware by TheZeroBeast Link:…

Downloads
340
Likes
39
Rating
4.25
P
PrintablesPrintLab

Tap | Bluetooth Dual Switch Assistive Device

Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…

Downloads
331
Likes
71
Rating
5
P
Printablespedrolamas

Ender-3 Filament Guide with Bowden Tube for WINSINN Dual Gear Extruder

You will need a pneumatic connector for this to work, I recommend attaching the connector before assembling the holder on the printer as it might require some force to screw it in. Recommend print in 0.16 layer height with adaptive layers…

Downloads
324
Likes
39
Rating
4.75
P
PrintablesGabbox3D

Batman STL for: bed level test, text test, and dual color test

Remix of famous Batman, but in stl format and with text on it. So you can do differents checks at once!

Downloads
313
Likes
12
Rating
2
P
PrintablesLBussy

DASH: Dual Adjustable Spool Holder

This spool holder originates from Dominik Císař's work in the Original Prusa i3 MK3 ENCLOSURE - Ikea Lack table - Prusa Research . Subsequently, Necko released a remixed version of the spook holder leveraging 608 (skateboard) bearings. I…

Downloads
297
Likes
60
Rating
4.71
P
PrintablesBill Porter

Case for K6ARK Dual Paddle CW Key

I really like the K6ARK morse code key, but I have managed to break a couple of them by carelessly storing them in my kits. This case prevents the paddles from being touched while stored. It is designed to hold the key in the case with a…

Downloads
285
Likes
36
Rating
5
P
Printablesskoczon

SSD Adapter 3,5" to 2,5" for HP computers v2 (dual ssd / hdd possible)

The second version of my first hdd adapter model for HP computers. Allows you to combine with another design: two drives in one bay. Compatible with HP Elite 8000 - 8300 tower and small form factor computers.

Downloads
257
Likes
32
Rating
5
P
PrintablesDario Cairoli

Dual Colour Dice rounded (foldable)

This design of a fair (all sides have equal probability to be rolled), utilizes two prints with different colours, stackt on each other. All sides of the dice are printed flat on the print-bed and then folded into the final dice. Printing…

Downloads
254
Likes
40
Rating
5
P
Printableszuberio

Ripple Phone Holder [Vase Mode/Spiralized Outer Contour] with dual layer trick

For everyone like me who's new to working from home, this is great for keeping my phone nearby, visible, and taking up a minimal footprint on my tiny workspace. I'm quite proud of this design. I'm leveraging the fast print speed of vase…

Downloads
238
Likes
26
Rating
5
P
PrintablesAdam

Under Desk Dual Laptop mount

A laptop under desk mount top shelf supports a 28mm laptop and bottom shelf supports a 30mm laptop. Has side cutouts to allow power and USB-C connections.

Downloads
217
Likes
24
Rating
5
P
PrintablesRobertusMaximus

Multilevel Ground Dual Transport

Even during intercene fighting, people still must get about the megalopolis hellscapes. Work accomplished helps the war effort. So travel in style on the Dual Multilevel Ground Transport. It will take you where you need to go. Whether you…

Downloads
210
Likes
45
Rating
0
P
Printablesfefefico

Dualshock 4 holder for Ikea Skådis

Here are the settings I've used on my Ender 3 with Prusa Slic3r: 0.16 layer height - makes it stronger and nicer; organic support material for the hooks - you could also use grid, doesn't change much; grid infill 15% - any pattern could…

Downloads
194
Likes
20
Rating
4.5
P
Printablesfhessel

Tamper Station for Sage Dual Boiler (58mm)

The holder can take the portafilters for one or two cups and holds both in a vertical position. I printed in PETG, but other materials like PLA should also work. No special print settings (like supports) are required.

Downloads
189
Likes
22
Rating
5
P
PrintablesSica

On Air sign, dual color, single extruder

A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…

Downloads
185
Likes
113
Rating
5
P
PrintablesGreatOldOne

MagSafe Charging Pad (Dual iPhone or iPhone and Watch)

Dual charging pad / station for the new MagSafe pucks that the iPhone 12 / 12 Pro uses. The charging pucks just drop in to the cavities, and then are held in place with the screw in backs. The cables are held in a similar way with a…

Downloads
152
Likes
31
Rating
4.5
P
Printablesinfn8

Nespresso Vertuo Capsule Dispenser - Dual large

Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.

Downloads
136
Likes
49
Rating
0
P
PrintablesFinalEnd

Dual-Shell Lamp with Glowing Ornament for LED-Tealights

This lamp is meant to be used with common LED tealights. It consists of a inner shell, where the tealight can be placed. The outer shell gets slid over the inner shell. The two parts can still be rotated between one another, so you can…

Downloads
124
Likes
46
Rating
5
P
Printablesmysak85

PS5 DUALSENSE držák na stěnu

V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Držák na stěnu pro ovladač Dualsense na Playstation 5 s možností vložení nabíjecího…

Downloads
122
Likes
27
Rating
5
P
PrintablesJRD

Tamiya Clodbuster Bullhead Dual Short Servo Conversion

A simple to print and install conversion to convert a Tamiya Clodbuster to run dual steering servos by positioning one on each axle. Uses compact SPT4412LV 12KG Digital Servos, typically available for around 11 euros per piece. Also…

Downloads
118
Likes
20
Rating
0
P
Printablesrodrigocbv

Dual wine bottle support

I created this wine bottle support that can be also be used on top of the other.

Downloads
115
Likes
22
Rating
0
P
PrintablesCupertinoGeek

Dual Reverse bowden PTFE- tube Guide

Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…

Downloads
112
Likes
19
Rating
4

Lucky 13 backpack dual dragon slayer sword scabbard

Printed using Prusament PETG Jet black. Please be advised, the carried swords will interfere slightly with the display stand version of the waist. Original dragon slayer sword model: Dragon Slayer Sword for Lucky 13 by kh4rj0 | Download…

Downloads
111
Likes
50
Rating
0
P
PrintablesBoogie

Samsung T5 SSD dual wallmount

Wallmount for two Samsung T5 external SSD

Downloads
107
Likes
9
Rating
0
P
PrintablesBRiiGGEN

Gridfinity Dual Olfa Knife holder 1x4x2U

A 1X4X2U bin made to hold 2 Olfa Craft Knives with thumb slot for easy removal of the craft knife

Downloads
105
Likes
21
Rating
5
P
Printablesfifindr

Mini Dual Chamber Whistle

Change bridge orientation to 180°. A tiny dual-chamber whistle that delivers an impressively loud sound despite its compact size. The two independent chambers produce two different tones at the same time, creating a richer and more…

Downloads
104
Likes
13
Rating
5
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Zebra

Size: 82mm x 52mm x 41mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: All parts need to be glued.

Downloads
101
Likes
24
Rating
0
P
Printablessquinn

Circumvolving Dice Case w/ Hidden Magnetic Dual Latch

A curvy eye-catching case with a rotating top that uses hidden magnets to loosely lock the top in place in both an “open” and “closed” position. The three compartments are sized to conveniently fit the standard 7 dice often used in DnD…

Downloads
101
Likes
53
Rating
5
P
PrintablesKazu-chan

Fly fishing line stock spool dual

This spool unit prevent the fly line from coiling after fishing. It is easy to change line. You can select clamping position horizontal or vertical. Regarding a line spool, you can use my fly line spool model.

Downloads
100
Likes
32
Rating
5
P
PrintablesElyse

Money Box or pencil cup Impossible passthrough - Single Extruder, Dual Color

Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…

Downloads
96
Likes
24
Rating
0
P
PrintablesMammaTaz

Canasta Dual Playing card holder

This is a remix of the design by Adam Miller. I was looking for a box that would hold my canasta cards, and really struggled finding anything I liked. I remixed it, adding the word canasta and then printed some card decals which i stuck…

Downloads
95
Likes
7
Rating
0
P
Printablessquinn

Dual Tape Dispenser

Be a better sharer and make sure you never run out with this basic tape dispenser that is setup to hold two rolls of standard scotch tape or an equivalent. The main shaft uses a threaded cap to keep the rolls from falling off, and…

Downloads
88
Likes
48
Rating
0
P
PrintablesTeraflop

Eufy Dual Video Doorbell Mount

Mounting the Eufy doorbell directly on the doorframe would not work because the camera view would be blocked by the bricks. It was not desirable to mount the doorbell on the bricks as this would incur additional work wiring the device.…

Downloads
87
Likes
11
Rating
0
P
PrintablesHermannSW

Dual Raspberry GS/HQ camera holder/mount and stand

Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…

Downloads
85
Likes
0
Rating
0
P
PrintablesGreatOldOne

Dual RD6006 / RD6012 Bench Supply

A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…

Downloads
83
Likes
15
Rating
0
P
Printablescamdotcam

LightBar Prusa MK3S Z Axis Dual Mount 7*16 extrusion slot

This is a modification I made to the excellent light bar design by SethBon to suit some aluminium extrusion I have, with external dimensions 7*16.…

Downloads
81
Likes
14
Rating
5
P
PrintablesIvvy

Minimalist Dual Pen Post-It Holder

Layer Height 0.2mm. Perimeters 2. Infill 15%. No need for supports.

Downloads
79
Likes
16
Rating
3
P
PrintablesmoWerk

Double Glasses Stand / Dual Spectacles Holder

Double Glasses stand with an abstract nose like proportion and stylized roundings. Supposed to hold a variety of different glasses types in a similar position. An additional design feature shall be thick layer lines. Those help to keep…

Downloads
75
Likes
14
Rating
0
P
PrintablesVeracon

Dual Ipad Mini 4 Fanatec CSW System

This is a solution to easily and quickly switch between a Wheel and two ipads Mini 4 on a simrig. The holepattern to fix it to the simrig is 4040 (most commenly used to build Simrigs) I use this to switch between simracing and playing…

Downloads
73
Likes
23
Rating
5
P
PrintablesTeila

MI100 dual 40mm fan shroud

Two versions of the cooling shroud for my MI100 GPU in my server. Supports recommended but not needed for the power connector tunnel. Recommended printing with 40mm holes facing the buildplate.

Downloads
70
Likes
2
Rating
0
P
PrintablesYann Büchau

Keyguardian: dual-key XOR mechanism

This is an XOR mechanism that requires exactly one of two keys to be inserted at a time. Once one key is inserted, it is locked and the other one is ejected. This is useful for example as a tracking system for small things such as car or…

Downloads
63
Likes
40
Rating
0
P
Printablesrottenbeans

Y-Axis tensioner with limiter/stopper for dual MGN12H linear rails on Ender 3 V2

Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…

Downloads
57
Likes
16
Rating
0
P
PrintablesIgnacio Gabriel

Powder Detergent Dispenser with TR48x12 Leadscrew and Dual 6000 Bearings

Imagine never spilling powdered detergent again or guessing how much you're using. This compact and durable 3D-printed dispenser gives you full control and consistency with every load of laundry. This system is built around a TR48x12 ISO…

Downloads
55
Likes
19
Rating
0
P
PrintablesDe3DPrintman

Botticellis Mappa dell´ Inferno - Dual-Color

Hey fellow Prusa enthusiast, I hope that you are doing great! I am a huge fan of Sandro Botticelli 's work and noticed that there are not many models available that resemble his Mappa dell' Inferno or “ Map of Hell ”. An intriguing piece…

Downloads
52
Likes
8
Rating
0
P
PrintablesMatKe

Tombow ABT Dual Brush Pen Holder

Pen holder for 8 Tombow ABT Dual Brush Pens

Downloads
49
Likes
7
Rating
0
P
Printablesakamaka

PrusaXL - Dual Nozzle Size Marker

PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type

Downloads
46
Likes
4
Rating
4.75
P
PrintablesMordiev

Dual BGM Mount for Lulzbot TAZ 1 through 5

This mod enables you to mount two BondTech BGM Dual drive extruders and a BL Touch probe to a Lulzbot TAZ 1 through 5. (It will also probably fit on a TAZ 6.) This mod also converts the TAZ to use 1.75 mm filament. Print instructions This…

Downloads
41
Likes
6
Rating
0
P
PrintablesWhiteDragonD

Hues and Cues Fence, remixed for 0.6mm nozzle and dual color

0.6mm nozzle 9 and 10 mm number height, Helvetica Rounded font sticking out 0.6mm from wall.

Downloads
40
Likes
4
Rating
0
P
PrintablesEd

Intel NUC Adapter for Ergotron HX Dual Arm

I use an Ergotron HX Dual Arm to mount 2 large LG monitors. This adapter allows you to mount the Intel NUC out of sight, behind the monitors. A normal VESA extension plate will not work in this case, since the LG displays have recessed…

Downloads
35
Likes
9
Rating
0
P
PrintablesBig Nubbins

Dual Remote Holder for TV / AV / Sound System remotes

There's not much space on the small table I keep next to my TV chair, so dealing with my 2 remotes is a bit cumbersome. I used cheap calipers to take the remotes' dimensions and then used OnShape to design a holder for them. To print I…

Downloads
32
Likes
2
Rating
0
P
PrintablesReaperSVK

Dual 2,5" SSD caddy for 3,5" HDD bay for Lian Li O11D EVO RGB

This is a simple dual SSD caddy you can use to put two 2,5" SSD drives into the 3,5" HDD bay which is used in the Lian Li O11D EVO RGB computer case. I used the step file for this PC case from the Lian Li website:…

Downloads
29
Likes
6
Rating
0
P
PrintablesAn12854

Dual WiFi Antenna Bracket - regular PCI(e) edition

PCIe/PCI bracket to fit Wi-Fi/Bluetooth antennas from an M.2 wireless module. Recommended PLA with supports as PETG sticks to supports with the force of god.

Downloads
28
Likes
1
Rating
0
P
Printablesguennersen

Oral-B Stages Kids dual stand

Toothbrush double stand for the AA battery-operated "Oral-B Stages Power Kids" model, which has a different base than the rechargeable version. There is also a wall mounted version

Downloads
26
Likes
0
Rating
0
P
PrintablesNiH

Wheelhub for Dualsense controller

Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…

Downloads
25
Likes
10
Rating
0
P
PrintablesThijs

Bracket Lenovo M720q 10G PCI-E NIC X710-DA2 Dual SFP+

Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q. The bracket has: Small slots for the LEDs are included. Holes for M3-inserts. Aditional holes for ventilation. Recess for USB cable. It is printed with the outside facing side…

Downloads
25
Likes
0
Rating
0
P
PrintablesBM

Goggles stand dual

You can mount until 3x M5 magnet on the back. 1 magnet is enough in the top hole, that's why there are 2 printed feet included in the file (needed for stability). Check the dimensions of you magnet to adapt the size of the feet if needed.

Downloads
22
Likes
0
Rating
0
P
PrintablesLittle Bloom

Dual Color and Texture Twisted Vase #ColorMix

Dual Color and Texture Twisted Vase 🏆 ColorMix Contest Entry A sculptural vase that combines two colors and two distinct textures in a flowing, twisted design. The contrast between smooth and rough surfaces creates a striking visual…

Downloads
20
Likes
4
Rating
0
P
PrintablesLudo B

Single Extruder - Dual Color. Mini spool holder hanging Prusa i3 MK3S+.

Ik vind het leuke spooltjes, hoe krijg ik die aan mijn Prusa i3 MK3S+ printer gehangen. Na redelijk wat tekenwerk paste het prefect. Om dat het zo klein is moet je wel heel voorzichtig zijn bij het plaatsen, de lipjes breken anders af. Er…

Downloads
19
Likes
6
Rating
0
P
Printablesjcieslak

LW-PLA Dual Egg Capsule for Model Rocketry NRC Competition

A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…

Downloads
18
Likes
1
Rating
0
P
PrintablesTBII78

Colgate Pulse Dual Brush holder

Colgate Pulse, tooth brush head holder. Holder for two brush heads. Printed with PETG but PLA is also fine. Printed at a layer height of 0.20 with 15% infill

Downloads
17
Likes
1
Rating
0
P
Printables3d_MrFox

Bobin for dual 608 bearings

These bobins fit the filament drybox 608 bearings and help keeping the filament spool centered. Print 4 copies.

Downloads
16
Likes
1
Rating
0
P
PrintablesGeert Bevin

Tactile Patch Sheet - MAVIS Detuned Dual Square

Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets

Downloads
15
Likes
1
Rating
0

Single Extruder Dual Color I Love Prusa Research

Print the top and bottom of the sign, then put them together to get a multicolor sign!

Downloads
10
Likes
3
Rating
0
P
PrintablesGFS

Keychain with logo. Electric scooter: Dualtron, Gotrax, Hiboy, Hiley, iscooter, Kukirin, mi, Nami, Ninebot, Niu, Razor, Sagway.

Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…

Downloads
8
Likes
0
Rating
0
P
PrintablesPawnMau

Buddy3D camera mount for dual-tool Prusa X with enclosure

Not satisfied with the solutions I found online, I designed this mount. I use two toolheads only to make the supports easier to remove, but it can also be printed using a single toolhead.

Downloads
6
Likes
3
Rating
5
P
Printablesmaniok

DualShock 4 external battery adapter

This adapter allows a high-capacity battery, such as f.e. Li-Poly 4000 mAh, to be connected to a DualShock 4 controller. The high-capacity battery provides extended gameplay for several days. Since the battery cannot fit inside the…

Downloads
3
Likes
1
Rating
0
P
PrintablesAda Cohen

Dual Portal Desk Toy

Update : There is now a third version of this model with more moving components, and only printed components. This is a followup to the simpler Magic Portal Desk Toy . This introduces a second screw element threaded in the reverse…

Downloads
13,010
Likes
3,134
Rating
4.88
P

Dual PS5 Controller Stand No Supports

I've tested this design with PS5 controllers, but it should work with many different controllers. If your console controllers fit, please let me know what you have so that I may update the model listing. 😃 This model prints on its side…

Downloads
11,121
Likes
1,330
Rating
4.98
P
PrintablesMkloberg

Taurus V5 Cooling Duct for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus, CR10 Smart Pro (Stock / Spider / Ceramic)

Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…

Downloads
10,707
Likes
1,344
Rating
4.87
P
Printablesserdaracikyol

Xbox Controller Dual Stand

Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.

Downloads
8,769
Likes
711
Rating
4.94