144 models
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…
A simplified 3d model for the EBB42 V1.1/2. The 3d model from GitHub done by the BTT is too big and it kills my CAD.
Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…
Backside mount for the EBB42, works with and without the filament sensor Recommended print settings Use PETG, ASA or ABS for the motor mount, the EBB mount and the cover can be printed in PLA Infill: 35%+ Wall lines: 3 Bill of materials…
DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used
This is a modification I made to one of our Vorons, I wanted to use a CAN based toolhead PCB to reduce wire break issues but wanted to keep the cable drag chains. This is what I ended up with and it works great! You will need: -…
This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…
Allows you to use EBB42 attachment with Voron. I use it with LGX on my Voron2.4. BOM: 7 threaded inserts 3 M3x22 Socket Button Head Cap Screws 7 M3x6 any screws (4 to hold EBB42 and 3 to hold dragchain) Print settings: 0.4 nozzle 4 walls…
"A" pillar with place for BTT EBB42 PCB for 4 line pico MMU. Full Documentation for pico MMU https://github.com/lhndo/LH-Stinger/wiki/Pico-MMU
This replaces the EVA cable guide mount with a frame to attach a board meant for a 42mm stepper such as a BigTreeTech EBB42. If you are running input shaper on klipper you will need to set axes_map: z, x, -y This does mean that there is…
Just a small adapter plate to add a ebb42 can board to a H2 Extruder. Recommended this be made from aluminum or a high temp plastic anything with a Glass transition temp of 100+C especially if your printing in a high ambient temp…
EVA 3 compatible mount of BigTreeTech EBB42 Toolboard and Phaetus Apus extruder. BOM Note: Some screws can be salvaged from the Apus itself EBB42 Item Qty Description M3 x 4mm Heat Inserts 13 6 for extruder mount, 7 for toolboard mount M3…
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
This uses mostly hardware that the voron 2.4 uses as well as hardware that the LGX comes with. You will need an additional limit switch, 7mm ball bearing and 3010 blower fan. Some supports needed Print with voron print settings The…
Es handelt sich um einen Adapter wenn ihr einen ebb36 habt aber einen ebb42 montieren wollt.
This is a mount for the Bigtreetech EBB42 Can modul
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
1/25/23 - Added a second version where the top strain relief is removed and zip tie holes are added to the left side. I found it more stable when securing the cable on the side removing the flex that was present in the upper part of the…
Mockup of Bigtreetech's EBB42 Gen2 v1.0 for use with modeling mounts, etc. Generated in Fusion 360 based off the images of the board on the BTTWiki. PCB components were pulled from GrabCAD and may not exactly match the product. Please do…
Fan Mount for BTT EBB 42 You need: 2 x M3 x 12mm 2 x M3 x 35mm 1 x 40mm Fan
Design for a CAN Toolhead board to suit a MicroSwiss NG Extruder setup with a MGN12H Linear Rail
Will need: 4x 3mm heat inserts 6x M3 6mm screws 3x M3 8mm screws 2x 20mm standoffs
I have re-modeled all the pieces to accommodate a Stealthburner with the following modifications: Chaoticlab TAP CNC (I am pretty sure everything works just as well even if you do not have a TAP, however it is untested) Bigtreetech EBB42…
Printed in PETG for testing purposes; printing in ABS is recommended. I used 10% gyroid infill, 5 top and bottom layers.
A cover for the EBB42. The bottom for this cover is here (for the smaller version): https://www.thingiverse.com/thing:5942676 I used 3x50 screws: Bondtech extruder + thickness https://www.thingiverse.com/thing:4122337 between extruder and…
Just a quick remix of mmuellerphoto EBB42 Mount with heat inserts. Check him out and his many mods for the RatRig community. You will need 4 of the standard EVA 3.x heat inserts (4,5x4mm)
I have printed & installed this design personally. But it is considered an experimental toolhead design as I do not have many hours on it. It allows you to use your Sprite extruder with an MGN12H rail on the X gantry. Belt hooks in this…
Mount for the BTT EBB42 CAN Toolboard and Microswiss NG extruder for Ender 3 / CR10. Rather than mounting this directly on the stepper, this allows the board to be mounted horizontally to preserve function of the ADXL chip (at least for…
Edit: You must remove the RGB, I2C, and PROBE pin headers on the EBB42 to fit the tested models. I desoldered the pin headers, but cutting them off with diagonal cutters is probably good enough. I added an untested version of the x0 arm…
Modified original version to use Hex Nuts for mounting over heat inserts, creating additional spacing around corners of the board due to needing to increase thickness of the posts to accommodate M3 hex nuts.
This is a remix of the original design . Lightweight holder for the EBB42 tool board mounted directly on the Bondtech LGX. The installation requires the following: 4 pcs - M3 Standoff Pillar screws (you will find this in the LGX package)…
use M3 heat inserts to mount the ebb
BOM: - 6x m3 heat inserts - 6x m3 10mm BHCS - 3x JST XH2.54 2 pins - 2x longer screws for motor to attach to standoffs (i think m3 x 16 should do it, just a guess) - about 3 zipties (if they even will fit rofl) Instructions: place heat…
A CAN cable stress relief that mounts between the EBB42 board and the NEMA17 stepper substituting stock spacers.
Pico MMU Cover (Remix) This is a remix of Janusz's "A" pillar & EBB42 for 4 line pico MMU . Parts Needed 4x VORON - Heat Set Insert M3x5x4 4x M3x25 socket screw About the Pico MMU The Pico MMU is an open-source multi-material upgrade for…
CANBus cable strain relief for BTT EBB42 board piggybacking an NEMA17 42mm extruder motor. .3mf and .step files of the model included, also the Fusion360 archive file if someone wishes to modify the model.
Remixed version from @billyd of the EBB42 mount with an Orbiter v2 extruder
The models on BTT's Github are way too detailed for most work. Part of this is the fact that their CAD package inscribed lettering on most of the individual parts. There were a lot of 89.9995* angles in the original models that gave me…
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
This was a remix of Nick1's alternate A-pillar to fit the Neptune 4 series printers. When using the included mounting block for the top of the gantry, the power and usb connections will point to the back of the machine instead of hanging…
A mount to use an EBB42-style square toolhead board with the Galileo 2 extruder on the Voron Stealthburner. Compatible with original G2E parts and the original CB-G2 cable gland mount. I've included a modified cable gland mount with…
Here is my ROME setup (for more information on Helge Keck's ROME see https://github.com/HelgeKeck/rome ) for my VCORE3 500 printer. Some of these are remixed versions of Helge's designs and some are original. This is a fully tested setup…
simple mount and cover for attaching a btt ebb42 can toolhead board to to your stealthburner fits well print with supports
I have a model of the wire thing on the USB side, but ended up just using my existing CAN setup.
Total new design. Much improved. Designed to fir with this back cover.
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
I abandoned this model in favor of the adapter mount included in this set of parts . I wanted to use an eddy coil scanner on my K1. I wanted to run mainline Klipper. This meant that I had to replace the motherboard with something else. I…
Printing Settings : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Top/Bottom Layer: 3-4 Infill: 30% Support: Maybe needed Assembly for the KNOMI2 : 1) M3x4.5x3 Heat Inserts - 3pcs 2) M3x6 Cap/Button Screw - 3pcs Assembly for the…
EBB42 Board Mount for A4T with Orbiter 2.5
I use it for my custom large format printer, therefore i cannot guarantee the fitment for any standart printermodel.
EBB42 holder for E-Bot Source: https://www.tinkercad.com/things/f1gbXhVOa1f Category: 3D Printer Parts
BOM m3 spacer – 4 m3 nut (optional) - 4 m3 x 8 bolt m3 hammer nut 2nd version does not require nuts, and has slimmer hold of an extrusion, can be mounted next to installed panel
Trying to create parts with the EBB42? This model allows you to print a template in a short amount of time.
Using RatOS with the EBB42 toolboard means connecting a chunky USB C cable to the toolboard. These cables aren't designed for applications involving motion, so need a lot of reinforcement and strain relief - the other designs I've seen do…
Modified the Holder for the Orbiter 1.5 (different hole pattern and longer Extruder) - compatible with the 20mm Motor.
Remix of Vittop's EBB42 canbus Voron attachment with dragchain mount for drag chains that have 2 holes instead of 3.
Allows you to easily get BTT EBB42 board into DFU mode with a single finger. If you know, you know.
Didnt have time for RatRig to release their toolboard mount for their new toolhead design Designed this with help of official CAD of the toolhead, used whole fan 4028 grill as one assembly to sturdy it a bit. Not the most light weight but…
Mount to add the BTT EBB42 Toolboard to your Sovol SV08 printer. Requires 4 x 5mmx4mm M3 Voron spec heat inserts. Default version includes a fix to stop the extruder arm idler gear pin slipping out. There's an alternative that omits this.…
I had issues with the usb-c cable on the ebb42 that got loose and no model I found online was compatible with a thick usb-c cable and an bondtech LGX - but here we go. I use an Anker Powerline USB-C cable, which has a pretty hefty plug,…
If you use the EBB42, or any other board mounted to the back side of the extruder motor, you can use the cable guide system that is in the original design. I created this modification of the LGX Drive mount to include a Cable Guide mount…
VC3.1 200 has a small space under the top, so mount is lowered and the cable mounting is oriented forward to prevent the cable from scraping the housing. Of course, it is also suitable for the larger RatRig V-Core 300 - 500. The mounting…
Adapters to install ebb36 on Ebb42 mounts for Vcore(Ratrig)
Modified EBB Front part with strain relief inspired by another design , so it provides better support for USB-C and power cable. Note: design is based on converted STL, as I didn't notice link to Onshape. 🙈 It's huge and PITA to work…
I abandoned this approach and designed a new set of parts. I took all the Creality electronics out of my K1. I installed a BTT Manta M5P, a CB2, an EBB42 toolhead board, and a Cartographer Eddy scanner. I couldn't find any fan shrouds…
bigtreetech ebb42 mount to pair with my biqu h2v2s extruder mount https://www.printables.com/model/924433-biqu-h2v2s-mount-kobra-max-vyper-kobra-plus
EBB42 Mount designed for V-Minion/EVA 2.4 platform
I was missing a hole for spring steel wire in the original EBB42 holder. I have added this. It is a remix of the origin
Angled version of the famous mount by @mmuellerphoto .
The EBB42 Board adapter is very nice, but it sticks out too far, running into the cover and also the bottom of the EBB42 has components that protrude. This model fixes both problems by combining the Extruder Main Body with the EBB42…
I went looking for an EBB42 mount to the back of the stealthburner, but most everything that I found would fit a obiter X.X extruder for the stealthburner. As like the rest of my designs/work that I do, it's all done in Microsoft 3D…
This model mounts a Mellow SHT42 or Bigtreetech EBB42 to the stepper motor of a Bigtreetech Nebula Extruder. You will need to print 1x PCB mount and 2x spacers and supply 2 35-40mm M3 flat head screws and two brass standoffs. My standoffs…
Change holder to support Can connector
Now, the mainboard chassis for the OEM Kobra Neo mainboard does not fit an SKR Mini E3 V3, let alone adding the EBB42 to the same area. Side note: I have the EBB42 down in the mainboard chassis for now and not mounted on the printhead,…
If you don't want to reprint the carriage, you only need to cut off a small piece and itll fit on stock and BCJ linear carriage. The fans mounting hole is outside beside the EBB42 pcb and no plugs or pins need to cut. The offset is…
This is a mount for ebb42 to terminator without drilling. Holes in the model are tight. tap'em if needed. PETG is fine. Use included spacers. pancake cables are too short for most of the places. EDIT: new model with a place for ziptie.…
I made some cutouts to shed some weight and give it a better look IMO. I also did away with the heatset inserts. I built in standoffs and sized the holes to simply screw m3 screws right in. I printed it in Overture Black PETG and it has…
Perhaps it is necessary to hold it with tape to measure the impulse shaper fits in the same place as the original cable holder
print as 2 separate bodies, then join with CA glue
see through part of cpap hose seemed a little thin afraid the toolboard would melt it, so made little thin layer between Which the slicer would not see (too thin at .2mm wide) so fake made it .4mm thick and then it still only printed it…
EBB42 mount for sherpa mini + dragonburner (toolchanger)
Adaptador para reemplazar el THR 2.0 de la KLP 230 por un Bigtreetech EBB42. Incluye también una modificación para el ventilador 5020 de la máquina. Lo imprimí en nailon ePA-CF debido a la alta temperatura de la cámara y su proximidad a…
mount to sherpa with 2 m3*12 mount ebb42 to plate with 4 heated brass nuts 3*5*4
Ikea Skadis mounts for LH Pico MMU. Easy L/R brackets courtesy of ncapz on the LH Discord. EBB42 mounting courtesy of Nick1. For the 3-Lane MMU : PicoMMU Skadis Left PicoMMU Skadis Right For the 4-Lane MMU : PicoMMU Skadis Left PicoMMU…
This is a quick print requiring for M3 heatset inserts to mount the EBB36/42 Gen2 adapter board in the electronics bay of the SV08 Max.
Just need 4 voron standard m3 heat set inserts.
Spacer to align eddy on original screw for stock inductive sensor. Use with skinny eddy. Use with any version of BTT EDDY with EDDY-NG. Spacing from bed is just right :-). You can use with stock THR via USB, unfortunatly my THR fall apart…
This is a great fan shroud that allows the use of a BMG extruder + V6 together with no gap and very little tubing. As the gantry on an Aquila varies slightly from Ender, some modifications were needed to be able to mount it. Below you'll…
If you want to put use canbus on your printer with the H2 Extruder and the MAD Shroud ( LINK ) You will need 4x M3x4mm OD 4.5mm Heated inserts 4x M3x20mm Socket cap screw Mount the bracket on the 4 opening holes on the MAD Shroud Base Now…
EBB42 Mount for Microswiss NG Revo Mount has built in strain relief fot the cable as the first one i printed did not have and the cable broke off after about a week of printing. Use 2 zip ties to secure the cable to the strain relief. The…
I have only been printing with this for a relatively short time. I have USB-C cable and a CF9.02.08 chainflex cable attached which is relatively heavy but it seems the mount is definitely strong enough even when I push my V-Core 500 to…
This is a mount for the EBB42 and similar boards. It attaches to the back of the orbiter 2.0 . you will need 5 3mm threaded inserts and 6 3x35mm Hex Cap screws.
Custom Stealhburner setup adapted for Ender 3 with EBB42 and EDDY probe. This thing works surprisingly well, but definitely needs more polishing. The x motor cover is needed to relocate the switch position - it is not needed when using…
I added EBBsupport to MFBS Ultralight back-plate-top. I did this by combining the MFBS' design with that from Ratrig.
Modified plate for Evantis toolhead. Plate C for Rapido UHF 2.0 To be tested --> currently printing it myself
ebb42_to_36_adapter_V2 for Vcore
What and Why? This is a remix of @JesseCrash's PCB mount, PCB cover and mount extension to fill out the bottom of the Pico MMU. I have my Pico MMU mounted at the top of my Ender 3 V3 SE, and ran into an issue with the PTFE tubes hitting…
