5,122 models
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Made from a normal Benchy, Clay Rade's tentacles, and inspired by BUT NOT REMIXED FROM BECAUSE ITS NOT PERMITTED https://www.printables.com/model/350583-benchy-organic-support-test . Also I used a random water splash model I found…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for PETGSource material: PET
Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…
Print approx. €5.70–€6.96 excl. taxPreliminary estimate for one variant
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant
Prints Parameters : Layer Height : 0.2mm / 200um Perimeters : 6 (recommended) ~ Initially the lock may seem to be a little tight but with over a period of time and use, they will be lose enough! ~ ^This has been fixed now! Left the…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
If you like my design, I really appreciate if you can consider a coffee ☕ for me! ( LINK ) Version 2 released! Snaps on sides, slightly easier to open. Overview A business card stand for an exhibition booth or an event table. It folds and…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
We all know how bad it is: You're traveling and suddendly notice that you have forgotten your Chess board and pieces. The vacation is ruined. This credit card sized Emergency Chess game solves this problem once and for all! You can always…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
I wanted to give my 20-minute phone stand a more interesting design and solve the problem of it being easy to knock over in portrait mode. Making the base hexagonal seemed like the perfect option. As an added bonus, there is now nothing…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Meditating Yoda
Print approx. €5.51–€6.74 excl. taxPreliminary estimate for one variant
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Print approx. €4.84–€5.92 excl. taxPreliminary estimate for one variant
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
All tokens for all Kill Teams that have them, as well as tokens needed for the base game. Some tokens were more difficult to find designs for (i.e. Grisly Mark, Pain, Clearance Sweep, etc.), but I did my best, and hopefully the symbols I…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
Updates 23-03-04 Radius measurement was incorrect due to incorrect application of the ‘decorative’ edge. Resulting in a 0.7mm radius measurement error. This has now been corrected Increased size of text slightly on the joining ledge to…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for PETGSource material: PET
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Designed to delight knitters and crocheters alike, this dual-compartment yarn bowl features a built-in toolbox for storing hooks, needles, and accessories. Inspired by my wife's crafting needs, it keeps yarn organized and tools within…
Print approx. €20.77–€25.38 excl. taxPreliminary estimate for one variant
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant
Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
GoPro mount to attach the action camera to all possible surfaces with the help of double-sided adhesive tape. In my case to a fullface helmet. There is a hole where the hexagon screw can be easily attached. I would be very happy about any…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Adds an Apple AirTag and space for cash, without adding much in thickness (4mm for the AirTag, nothing for the cash). This remix adds space for an AirTag on the top plate, uses some of the thickness of the bottom plate to add space to…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Combine this with any credit card-sized wallets to store Euro coins. This can store two items of each Euro coin in a wallet that can hold credit cards, like https://www.printables.com/model/766390 or…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Your favorite fractal sculpture! now halved, with a long flat base so it can be a bookend! Please consider supporting my hobby. You will make my day! (excuse my sloppy Photoshop, I haven't been able to print it yet) This was generated to…
Print approx. €14.05–€17.18 excl. taxPreliminary estimate for one variant
I created this model to hold encounter cards for Arkham Horror 3rd edition. The holder is designed to hook into the modular connection points on the game boards. I've also included a version of this model which does not have the…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
The Volkswagen ID.4 has two credit card slots on top of the center console. These two slots are ideal for attaching a phone mount. The design has two slots in the stand, accordingly, where two printed cards can be inserted appropriately.…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a 'remix' of Das Filament Masterspool. I remodelled the Master Spool and split it into multiple pieces to fit on the Prusa Mini Build Plate. There are now 5 prints total: The big center parts (Part A and Part B) as well as the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a special winter edition of the shopping cart coins. This is your ticket to use your shopping cart. You can keep the chip on your keychain, inside your pocket or in your car :) Or even better, you can hang the chips on your…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
🎉 HAPPY BIRTHDAY MK4! 🍻 🧡🖤 I loved that MK4 anniversary Limited Edition PEI sheet with the isometric exploded view of the printer, and I am happy to have won one! If you were not able to get the real one, you can print this! Scale up to…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
LXO's Lowest poly The Thinker is one of my favorite models and has become somewhat of an icon for me. I've printed dozens of them, it is essentially my Benchy . Since I love it so much, and the original model is released as mesh only, I…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant
I liked the design I'm remixing. I decided to add a small compartment for a few bills, coins or flash memory cards. The drawer is very tight and there is no way to accidentally open it. The credit card compartment can hold 3 or 4 cards…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE (2026/01/23) - Added an STL model that has been scaled 200% larger named Conversation-Heart-Candy-Romantic-2xScale.stl. This appears to be especially helpful with some printers and the Orca Slicer. This is the first in a possible…
Print approx. €9.12–€11.15 excl. taxPreliminary estimate for PETGSource material: PET
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Organizer for all player tokens and components. It fits very precisely to the original game organizer without a need of any additonal modifications. Make sure to sort the indurstry tokens before inserting them to this organizer. It speeds…
Print approx. €16.22–€19.83 excl. taxPreliminary estimate for one variant
Printed on Prusa MK3S+ with default 0.2 Prusament PETG settings.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This credit card size radius gauge fits is small and fits to wallet or pocket. From 1mm to 18 radius and some basic hexagons (8,10,13,17,19). Simple design, simple use. I used ASA, but every material is possible, not neccesary…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
During box or square breathing, you breathe in for the count of 4, hold for 4, breathe out for 4, hold for 4, repeat. This little tool is a tactile guide for centering your mind while you do the box breathing. Each side has a different…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
CZ: Samosvorné víčko pro jogurt (Lidl Pilos). I když z mé strany byla snaha vytvořit co nejvíce univerzální model, nesedí na úplně každý kelímek (stejný výrobek, stejná značka). Doporučuji proto model vytisknout ve více velikostech…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
An easy to print credit card wallet. It has a spring mechanism to prevent credit cards from falling out, it fits about 3-4 credit cards. If you use the pre-sliced gcode, you will need to break out the supports using a screwdriver or…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Easy to print, no support or MMU needed.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
To edit the text: right click on text and edit (see images). Pour éditer le texte : faites un clic droit sur le texte et éditez (voir images)
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Chainsaw 1:10 and 1:12 for the RC car Expedition. The chainsaw is completely authentic and must not be missing in the equipment of any RC jeep Expedition. It…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
Prints at regular scale but I recommend 150% for full detail. See below I tried to squeeze in all the things I saw in the show. Did you notice the wheel on the right?
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
This is a car badge inspired by the Expanse ship Razorback, with the outline of a 2019 Mercedes GLC added. I will add any other custom car outlines in place of the GLC300 that you like: if you agree to post a make, or make a donation to…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Update Created three new versions! Widened Eyelet 3.5mm inner dimension instead of 3mm as my keyring was not able to rotate freely. Keyring Edition - Double Sided To allow ID Cards to be visible from both sides Classic - Double Sided…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
English: This is the family version of the holder. Now, there are 4 slots for toothbrushes and one for a charger. For those who don’t only have Philips Sonicare at home but also Oral-B for the kids, there’s an adapter included…
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for PETGSource material: PET
Meine Freundin und ich haben schon länger nach einer Möglichkeit gesucht, Einkaufchips und ein paar Münzen in unsere Kreditkartenetuis mit unterzubringen. Nun habe ich einfach ein kleines Fach in Kreditkartenformat entworfen, wo alle…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Added an alternative layout under STL … PhoneStandHeartB Added an alternative layout under STL … PhoneStandHeartC - just a minor change - the hearts above the flaps is higher up and at some angle A nice present/gift to someone that you…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Meditator and Dragon This model kind of sucks. My Trusty Design Computer bit the dust. Working on a m4 Mac mini and had to go through the entire rebuilding my tool chain. I had not realized how much I had augmented blender over the past 4…
Print approx. €19.75–€24.14 excl. taxPreliminary estimate for one variant
USSF Stars & Stripes – USA National Soccer Crest (Bas-Relief Edition) : World Cup 2026 Ojibwe Clan Animals & Cultural Significance The turtle, eagle, and bear are deeply sacred figures in Anishinaabe (Ojibwe) tradition, prominently…
Print approx. €8.89–€10.87 excl. taxPreliminary estimate for one variant
This tag is for you to see what the filament really looks like.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
This model is created with modifiers in PrusaSlicer and fits 8 mm holes. Print it using vase mode and 2 bottom layers. Friction fit placement, no glue needed. All my models are free to download and remix. If you appreciate them, please…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
The 2022 remake of the classic Scotland Yard is called the Sherlock Holmes Edition and is a very nice game, the updated game mechanics add a lot of fun. Unfortunately the pawns and tickets were just thrown in ziplock bags, luckily the box…
Print approx. €9.15–€11.18 excl. taxPreliminary estimate for one variant
This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Continuing on from my “Wall Art Line Drawing Print”, here's another design I drew made into a 3d printed art piece. Please see the read me file for printing specs. Please post your make with the “Post A Make” button (below the “DOWNLOAD”…
Print approx. €6.64–€8.11 excl. taxPreliminary estimate for one variant
Hello, I have Traction pads for RC car Expedition 1:10, 1:12 RMT T98 Land Rover Defender. They are 220x30mm. I used PLA/PETG Basic as material You need to use supports If you are interested in my work, the links are here:…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Audentes fortuna iuvat! Protect your Philips OneBlade with a travel case worthy of a Bohemian knight. Inspired by the iconic Saviour Schnapps and medieval scroll cases from Kingdom Come: Deliverance , this design combines rugged…
Print approx. €12.13–€14.83 excl. taxPreliminary estimate for one variant
It is a super basic shield for both little and big knights. You can easily edit the 3mf in PrusaSlicer and exchange the snake for any other SVG, to better represent what you're fighting for. You can add supports into the handle, but it…
Print approx. €13.02–€15.92 excl. taxPreliminary estimate for one variant
DriftScoop – Paws Edition Part of the Drift Series Scoop. Clip. Go. The DriftScoop – Paws Edition brings pet personality to the rugged utility of the original DriftScoop. With the same travel-ready design and volume-tested functionality,…
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
I did not want the nose/tail of the deck-graphic getting scratched up everytime I picked up the board from the nose, so it was time to make this! I searched online first and found many, but none where you don't have to drill extra…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
For our latest space themed children's birthday party we bought some painter's overalls as space suits and needed a name badge for every guest like real astronauts have. As I could not find a satisfying model, I quickly created this name…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast. Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill.…
Print approx. €3.94–€4.81 excl. taxPreliminary estimate for PETGSource material: PET
Wanted a version of the hose support spike that could handle a bigger drainage hose and decided a loop was the easiest way to provide support and make it easy to remove for mowing.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Just a coloured remix of PiZero Vertical Screwless Camera Housings by gowen with PRUSA logo for MMU. Print instructions Category: Camera
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for PETGSource material: PET
After two weeks of modeling and testing, I'm presenting a new HyperX mouse design with a leather pattern and stitching for a more detailed look. Originally designed for MMU, but in pure white it looks just as luxurious. Enjoy, and leave a…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
RETRO TV CUSTOM KEYCHAIN: EPOXY & STICKER EDITION Bring back the vintage vibes with this Retro TV Keychain ! This model is part of our MS_D3sign collection, specifically engineered for those who love to add a professional, DIY touch to…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Bike-Symbol Keyring with editable text on back side. Settings Value Infill 15% (honeycomb) Perimeters 2 Solid Layers Top: 6 ; Bottom: 5 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material none Comments printed on MK4S…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Small Remix - I subtracted the FNATIC Logo and added some color changes to the file.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
I modified the box to fit a small version of the gridfinity system (32mm grid base) to store all the parts of the new version and to be able to take the boxes out while playing. The inner measurements are 133x161x36; the outer…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
A commemorative coin that can be used as a giveaway in your classroom celebrating the achievements of the crew of Expedition 72 of the International Space Station! This model is based on the Mission Patch for Expedition 72 crew, designed…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This game gives each player 6 caps in different sizes. Large (Top or Bottom) Medium, Small, Mini, Micro and Nano. 12 Pieces can be stored in a Container with a thread to make it easier to travel. If you have a small pen 45mm long, you can…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
VersaFrame - MOM Heart Stand Edition Celebrate Mom with this heartfelt base for your VersaFrame modular photo frame system. The MOM Heart Stand Edition features bold serif lettering with a cutout heart in place of the "O" — a perfect…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Turn unused cubicle walls into an organized, customizable workspace with HexBoard Cubicle Set Up . This modular storage system is designed to keep your everyday office essentials organized, accessible, and exactly where you need them.…
Print approx. €5.85–€7.15 excl. taxPreliminary estimate for one variant
It is a supported edition because my PetG is not good in bridge making. The support is very easy to remove, You not needed to have any tool for it.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €10.77–€13.16 excl. taxPreliminary estimate for one variant
Updates SUN 11 OCT 2026 Added photo of Exshtender "seen in the wild" @ LMS just outside Philadelphia (Sent to me by a friend of Yosef Shraga's Tati) Updated the arm to version 7.4 The arm now locks into place. It means that you have to…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
This is a remix of the popular Modular card wallet by CHKING. I've strengthened the sides a little and added a slick storage compartment on the back which keeps it nice and slim. This wallet version is only for 6 cards. Small magnets can…
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Magic Payment Wand – Pay with a Little Magic Attention please: This is a remix of DesertCruiser's model available at: https://makerworld.com/models/2282000 Turn an everyday gesture into a moment of enchantment. This 3D-printed magic wand…
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. PS: only works with the phone in…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
This Mini Whistle – Extremely Loud (115dB) – 1.5g Edition is a slightly larger, sturdier version of the original mini whistle, still small enough to disappear on a keyring. Weighing in at 1.5 grams , it prints quickly and comes off the…
Organize your workspace like a pro! This upgraded Honeycomb Edition of the Stackable Crate Plus combines structural strength with a modern aesthetic, optimized specifically for 3D printing. Key Features: Perfectly Stackable: Designed for…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
The Secret Storage Book – Dragon Edition is the second release in my Ornate Book series. This decorative storage container is designed to resemble a classic embossed book, featuring a prominent dragon motif inspired by traditional fantasy…
Building a large minifig wall meant that printing AJ Raceway's awesome hexagons individually was taking a little time. So I whipped up some larger options depending on the size of your print bed. You can now print a set of 3 or a set of…
Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…
Description Halloween Flexi Dino with Pumpkin Add a touch of prehistoric magic to your Halloween with the Halloween Flexi Dino! This adorable flexible dinosaur is wearing a witch’s hat and holding a glowing pumpkin, ready to enchant…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
This innovative dust collector is designed to optimize your drilling work. The model natively supports 27-28mm mineral water bottle mouths and includes an adapter, making it compatible with Coca-Cola, Sprite, and other standard beverage…
![Business Card Case Holder & Stand [& Credit Card too!] (print-in-place, no support)](https://media.printables.com/media/prints/846c1284-c782-4628-b4ad-1f2f17dfd173/images/11630392_08724ebf-b08e-42b6-a261-58a1bf8a7450_f93918e8-9f3f-411a-b996-adeb883684e5/version-2.jpg)
![PaScn3D Mk.0 - 3D Scanner [PrusaPrinters Contest Edition]](https://media.printables.com/media/prints/23297/images/237355_72dadc53-8e36-4086-b7eb-9482eba771ac/step27.png)
![[REMIX] The Thinker - Voronoi Edition](https://media.printables.com/media/prints/581337/images/4915766_6be6cd43-bbda-453a-93e2-a49e6a31ec26_9f066e78-a41d-4e51-b188-f9113a4e6977/img-1-new.jpg)
