355 models
Wallet with eject mechanism. Credit card sized. Includes optional coin and paper money holder. New in second edition sturdier design better fitting lid and longer lid screw more rounded edges fixed fitting issue with end cover Print…
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for one variant
The main reason I made this for is the Nextbase dash cam, from which it is very hard to eject the card if you don't have long nails. It also features a cable hook to attach it to a nearby cable so you don't lose it.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I made this to mount the sheet holder print to the underside of my lack enclosure. It takes M3 nut and screw to hold it.
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
The lower holder is very difficult to remove. This ejector helps here Der untere Halter läßt sich nur sehr schwer entfernen. Hier hilft dieser Ausstoßer It would be nice if you post your make. Thank you
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is the first version, it's not 100% perfect but good enough for me now, but maybe not to your full expectation :) Need some time, feedback and will do a refinement once I have some time and testing. It's good for me now Maybe it is…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
The Breacher is a 3d printed Nerf tube-magazine shotgun blaster that fires and ejects Silly Shells! It's spring powered, with a pump action prime. Yes, it actually fires multiple darts at once! READ THE "Print Info" SECTION of this…
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
The source marked this model as adult content.
Battle Axe is a 3d printed Nerf shotgun blaster that fires and ejects Silly Shells! Spring powered, pump action prime. Yes, it actually fires multiple darts at once! Changelog is at the bottom of the description text. Most recent update:…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill
IF YOU ARE BUYING YOUR HARDWARE KIT FROM BEARSWARES, PRINT THE REMIX! Read the guide before building a Shellfish! PDF in files! The Shellfish: A Silly-Shell blaster that does it all :) This is a spring-powered revolver shotgun/grenade…
A really simple model, this 3d printable version of the eject tool may be useful for emergencies. If you can print it, tell me if it works.
Big update: New, Simple Version of The FNT Plates storage for Prusa MK3/4/Core One has been released. You can find it here. Hi, A have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to…
This is a “mildly” overengineered remix of Whity's excellent “slightly” overengineered Expandable Steel Sheet Holder for the MK3/S print sheets. The goal of the remix is to completely remove all connector pins from the eject button…
use at your own risk, you have a chance of this breaking off and getting stuck.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
My wife asked me to print a snowflake cookie cutter. Because the structures are very small I have also made an ejector to it. The cookies look very nice. I have printed the cookie cutter with PLA and a layer thickness of 0.2mm. No support…
This project is sponsored by PBCWay so might as well check out their services: And if you want to get the whole pen in metal. Use the STEP/STP files to get a quote from them (reminder to use a flexible not soft material for the extractor,…
F-16 Ejection seat most parts are combined for easy printing. The few items that are not will need to be printed later.
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
Have you ever tried to use a Micro SD card with the Bambu X1 series of printers? If so, you know why this exists. A simple model to make insertion and removal of your Micro SD card super easy. I'd recommed printing this on end, so the…
v1.1 - added step files, go nuts Miss loading physical media into some kind of slot to launch a game? And then pressing an eject button to swap to another game? The solution is here! Using the TapTo project , this case can be paired with…
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
Simply Dillon case ejector. Works with or without additional plate bearings. Also required M4 screw and nut. UPDATE: added "stronger" version 1.3 for weaker materials. If you are going to print using quality PETG v.1.2 is ok. ANOTHER…
Hello everyone! This is a 3D printed replacement stock designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the stock was a bit too short for my liking. So, I set out to design…
Note: This is a prototype and may lack the fit and finish that is desired I was inspired to start this project when seeing a commercial for a slim credit card wallet. The advertised product had a neat lever that ejected card for quick…
Recently, my brother bought himself a toy gun from Aliexpress. He asked me to set out a new set of bullets for him to show off to his friends. Also, he wanted to see how such schematics are made and how much work it takes to make the…
This is a “moderately” overengineered remix of telefaksi model. I liked the idea of having the "mildly" overengineered remix of Whity's excellent "slightly" overengineered Expandable Steel Sheet Holder for the MK4/MK3/S print sheets and…
Automatic shell ejector for Lee Classic Cast reloading press. Automatically discards de-primed shells. Should work with every shellholder. Print instructions Additionally neodymium magnet is required: Cylindrical, 4x4 mm. It needs to be…
I designed this little vacuum generator, also known as an ejector, for use with a vacuum cup for robotic manipulation. Blowing air in one side at 50 PSI will generate about 5 PSI of vacuum at the side port. The advantage of using a…
Releasing this master assembly of OTTOeject MK1 under OCL License. Please take note of the Open Community License and it's attributes. This is a plate changing system and simple automation solution that allows you to automate desktop 3D…
If you don't have long fingernails, it can be frustrating to eject the micro sd card. This little tool will make that job a little easier.
This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking forward too see your color scheme! Assembly is pretty…
This is an enhancement of the lee pro 1000 ejection ramp that forms part of the carrier body. The original is pretty bad at letting ejected rounds fall into a bin - inevitably the completed rounds just pile up and require you to scoot…
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as…
KDS-MAC Toy Blaster: A.K.A - Plinker V3.5 The second blaster in my shell-ejecting V3 series of indoor plinkers. I have included all .STEP files for better print quality and easy editing! If you have made any of my other blasters this…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Motivated by the business card case design by @LoboCNC , and thanks to LoboCNC's…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [Update Oct 6, 2023:] added option for a wider base. ************** Inspired by…
Description This is a wallet sized to fit standard cards (standard, as defined by the ISO/IEC 7810 ID-1 size ). The wallet can hold any number of cards you want, so long as you can find M3 bolts long enough to work. The wallet holds cards…
For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
I had this uploaded on Makerworld originally, but they have started removing toy guns so I will try it out here. Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Step 7: Step 8: Step 9: Step 10: Step 11: Step 12: Step 13: Step 14: Step 15:
I wanted to have a 3D printer capable of ejecting completed parts and work through a print queue automatically, but without compromising the kinematics or build volume. My solution is to add a conveyor belt over the heated bed of a delta…
These Ejector Shell... Shells are simple 3D-printed replacement shells for the X-Shot Excel Ejector Shell Bolt-Action blaster. Featuring much the same geometry as the shells included with the blaster except missing the fins and dart post,…
High Power Rocketry e.Charge case This is a simple and quick to print recovery charge case in four sizes. This uses standard electronic matches that when seated in the case, prevent black powder leakage. They're designed for single use…
german, english below: Modifizierte und optimierte Version für die einfache Entnahme des Shelly-Relais! (v2.0) Dies ist eine modifizierte einfache DIN-Schienenhalterung für die Shelly Plus Familie oder ähnliche Smart-Relais. Mit diesem…
Placker Dispenser with Ejector kinda hokey but seems to work.
A set of SIM tools, useful in case of emergencies.
The ANVIL is a 3d printed Nerf box-magazine shotgun blaster that fires and ejects Silly Shells! It's spring powered, with a pump action prime, and quickly reloadable magazines. Yes, it actually fires multiple darts at once! READ THE…
Hello everyone! This is a kit for the X-Shot Excel Ejector Shell Blaster that allows the blaster to feed darts from a Talon Magazine. When I saw photos of this blaster before it was available, this is the modification I knew I wanted to…
Use for cutting out three prong holder from cone 6 clay to insert stilt holders in. Use the ejector to push the clay out when cut. Remember to use a release agent like olive oil spray or corn starch to make the clay separate from the…
Two part thingy: eject_knob.stl is the main part with cutouts for the letters; eject_letters.stl is a separate file with the letters in 5 slightly different sizes so you can pick the ones that fit best for your printer. I used gray…
Summary An Air Rifle that shoots 1 inch blow darts powered by CO2. Magazine fed with shell ejection mechanism DISCLAIMER: By downloading these files, you agree that I shall not be liable for any damage, injury or harm resulting directly…
I made this simple toy garage. The lever on the back allows the built-in ramp to be lifted, cars then drive out of the garage. My boy absolutely loves it! The base is seperate, the idea is that it is very easy to come up with your own…
This is a jig for laser engraving AR-15 dust cover/ejection port covers. Remember to flip your images 180 degrees when using this jig and engraving the inside of the cover! SCALE IT DOWN TO 10% OF THE SIZE BEFORE PRINTING...
Im recommending petg in red, 20% gyroid infill. Print at least two, it won't be the last one you crush ;) If the pin brakes off in the hole, use a plyer with a hot needle or hot small screw to pull it out. Please drop me a like as tip on…
A much needed extended barrel shroud for X-shot Excel Ejector, 175mm total length. 31mm internal diameter, fits Rev2 EX BCAR inside (with my barrel mod.) :)
About I always loved small star cookies (gingerbread). But it's a hard work to cut them in large quantities. So I've created many cutters over last few years (once i even tried a cutting roller - didn't work though). This is my newest…
This model is a modiefied version of my earlier posted ejction-seat for L-39 Albatros jet from customwings.cz. This new version is an unmodified scale 1:3.5 seat and I don't use any screws in this version to make it easier to change the…
The button I could find on the internet for the FB-354 (not FZ-354) was supposed to be glued in place according to an ebay ad I found for it.. Not good enough.. Not good enough at all.. Totally reworked the model but let's call this a…
Build an epic sand structure one brick at a time! All without the hassle of shaking or slamming the mold to get the sand to release. Get a perfect brick every time! Enjoy a poorly filmed video from my cellphone demonstrating how to use…
The Orca is a modular, shell ejecting, low hardware nerf blaster that uses 4mm elastic and super glue for assembly. Designed to fit the needs of just about any hobbyist or prop blaster enjoyer. Switch from a picatinny underbarrel launcher…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
After the last wallet competition, I decided that I wanted to put this design on printables, since in my opinion this is a much more convenient implementation of a similar wallet. I've been using this for a year now and it worked all this…
A trivial design - but it's pretty annoying if you don't have one of these. Should print just fine in almost any filament. A little dab of hot glue will hold it in place.
Organize your workspace with this compact, cascading 4-tier pencil and crayon box! Designed with both aesthetics and ergonomics in mind, this cantilever-style box holds up to 48 pencils (12 per tray) and expands smoothly to give you a…
A replacement Famicom Knob As featured here: https://youtu.be/-tGosFYzI9U Category: 3D Printing
This is a tool for removing the roll pin that retains the ejector pin in an AR-10/LR-308 bolt. (See https://www.thingiverse.com/thing:3270414 for an AR-15 remix by kombayotch .) The concept is roughly based on the $63 version sold by a…
Constantly repairing the eject linkage, especially with the 480/580 decks, I designed and 3D printed a replacement part engineered for a snug interference fit. The fit is tight enough that the ferrule will dent before the part slides, but…
Printing Material: PLA or ABS Infill: 100% Wall Count: 3+ I would recommend printing the eject button sideways for added durability. You might need to clean off the support interface layer using an utility knife before installation, as it…
This is a vacuum ejector designed for compressed air to vacuum generation. Advantages of this type of vacuum generation is that it is instant when compressed air is applied it starts generating vacuum. Also, it can handle contaminants in…
Inspired by http://de.wikipedia.org/wiki/Wasserstrahlpumpe and http://en.wikipedia.org/wiki/Injector Instructions Print, connect to a water pipe, vaccum :) outer diameter on all three connectors: 15mm V2: no edges -> to print with…
Replaces broken ejector on Krups EA800x Original by MrBanksy on Thingiverse - Thanks PLA Pro .2 Layer height Supports required If you like, like. Enjoy!
i have tried every signal water powered vacuum generator printable available. non, not one works enough to work. mine does and i decided to use a shower hose connection. i measured the vacuum straight off the printer at 14 inches of…
I created an ejector pin to fit snugly within ColgS3b's can crusher sleeve, matching the base diameter perfectly. I also modified the crushing piston to nest the ejector pin inside, allowing all three components to be stored together,…
PUMP-2000: Customizable, Shell-Ejecting Toy Blaster (Plinker V3.5 Series) This is a toy that fires a projectile! Never fire at pets or unwilling participants. This can damage drywall, use caution and protective eyewear. Never brandish…
11/10/2024 - I'm planning to remove this model in 60 days, so it will only be available on MakerWorld. The reasoning is that this design is Bambu specific, and maintaining the design on one site is much easier than having to update two…
8mm spring spacer for X-Shot Excel Ejector Stretch/shrink Z dimension in slicer for different sizes
The holder it comes with should be glued to the side but i didnt want to glue anything to it. Therefore i made a version that simply slides on the rail on the top. Simply glue the Lower Part to the Top part. To secure it you can use the…
Just an alternative mechanism that will print in one past with resin printer. More details: https://www.printables.com/model/141672-dreamcast-noctua-fan-mod
Anyone who's has spent any period of time with an X-10 press knows all too well that jams that can occur as a result of the shell plate retainer loosening up and rotating counter-clockwise every so slightly. This rotation repositions the…
These modified silly shells are made to be loaded into the Yeethammer, then twisted (or clipped form the barrel) to prevent ejection when reloading. This lets you reload the Yeethammer much more quickly by only loading darts instead of…
this was a inspired after seeing the FGC-9 MKII. to cover up the ejector mechanism. with a cover. to install this one is it possible to use the same m3 20mm bolts, but m3 25mm will work as well more can be found here…
This is a remix of Kevin's excellent 40° stand for the MX Ergo. I made this a long time ago and shared it on Thingiverse, and I'm now moving my work to Printables. I had been thinking about how to add a button to eject the MX Ergo's…
This shell holds up to 6 BB's and turns the bolt action rifle to a shotgun. I used .20g BB's for indoor CQB play. With my Bambulabs X1 Carbon .4mm Nozzle and ABS it could print the shell and the only post processing needed was to take off…
Hello. A local shop got new trolleys recently with a little drawer for the coin. I tried to make a tool similar to the removable trolley coin tokens I had made in the past. The closest I got was this tool that lets me eject the coin after…
Ejector with threaded fittings and mounting plate. compressed air inlet: ¼'' outlet: 3/8'' media inlet 6.1 mm for pushlock tubing.
This is a "modified" version of Chewey's “mildly” overengineered remix of Whity's excellent “slightly” overengineered Expandable Steel Sheet Holder for the MK3/S print sheets. I just wanted to have a steel sheet holder with an eject…
Safety Disclaimer This began as an April Fool's project--do not shoot Sillyshells at people or animals. Nobody wants a hunk of plastic hitting their head at 30mph. Depending on the material you shoot at, your shells could chip or break.…
The two parts for the 2.5uL ejector can be assembled in your slicer by importing one as a “part” of the other. The ejector model can likely be modified to fit the 10uL Research Plus pipettes by removing some of the “middle” section of the…
This is an old design, but figured I might share it. The can crusher by ColgS3b is nice, but I noticed sometimes, depending on how the can crushes, it can get stuck. So I modeled this up to be inserted through the bottom to help eject the…
Alternate print for the Noctua fan mod. Single print.
Remix ejecteur de caspule Magimix M200, cette pièce n'est plus fabriquée. C'est un remix car une dimension ne permettait pas de mettre en place correctement la pièce dans la cafetière. Je l'ai imprimé en résine liqcreate composite X, pour…
Three designs inspired by phucawf's design. As I was unable to make his design work on my XL650, as it does not have a Thrust Bearing, I designed these versions. The main issue I had with phucawf's design was that the case ejector would…
Hello everyone! This is a 3D printed replacement foregrip designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little too slippery for my liking. Plus, after…
Here I present you a customizable, modular CD holder with ejection levers. I am including a pre-assembled STL with slots for 8 CDs, but it is just an example. This is a modular system consisting of four (+1) separate parts. Full CAD files…
This is an floppy disk eject button for the Amiga 1000 with its original Panasonic / Matsushita drive. It needs to be printed with a slightly flexible resin, e.g. an "ABS-like" one. I believe this fits and works correctly, but my testing…
This is a ejector pin that I can keep safely nearby, Preferably on a keychain
I found the PushRod included with @chewey's seesaw mechanism (linked as remix source, below) was too short, leaving “slop” in the mechanism and preventing full eject actuation. This model is simply a lengthened version of that one part,…
![#0114 [Remix] Business Card Holder <Spring Loaded Card Ejection>](https://media.printables.com/media/prints/665593/images/5286655_cb879090-431c-4fb4-b015-f0fdae30c873_ec75e7ce-cfda-4ebe-b19e-42802fe37971/20231206_224503.jpg)
