Search results: eket

Sort order

Counting matching models…

P
PrintablesFokieH

Sägeketten Box stapelbar mit Clip

Eine Box die ich nutze um meine Sägeketten sauber zu verstauen. Die Kisten sind stapelbar und somit beliebig erweiterbar. Und selbstverständlich auch für alles andere nutzbar. Durch die seitlichen Clips wird der Stapel zusammengehalten…

Downloads
921
Likes
99
Rating
5
P
Printablesdallo97

Horizontal divider for Ikea EKET

It help me to harness better the volume of my EKETs. I printed them in PETG, with supports in the positions showed in the 3mf Screenshots. I'm a newer in the 3D print world, so i decided not to use only the bridges for not to risk wasting…

Downloads
307
Likes
59
Rating
4
P
Printablesmargintomargin

Mini Shelf for Ikea Eket

Half depth shelf extension for Ikea Eket shelf cubes, designed to be half the depth of the 23cm (9 inch) deep Eket cubes. 2 part print will fit on printers with a 250mm build volume. Single part print included for extra large print beds.…

Downloads
296
Likes
45
Rating
5
P
PrintablesLA J

Ikea Eket wall mount

Wall mount for Ikea Eket cabinet. Print - stick in - drill back plate - mount Can be printed two times for mounting to all four corners of the Eket. Category: Household

Downloads
249
Likes
35
Rating
5
P
PrintablesLukki

Schärfgitter / Feilhilfe für die Motorsägen - Sägekette

Man braucht zusätzlich: Klebstoff (zB Sekundenkleber / Cyanacrylat) 2 Magnete Ø5mm x 10mm (oder kleiner) Zwei Seiten werden einzeln gedruckt und gegeneinander mit Kleber zusammengeklebt. Dabei oder anschließend werden die Magnete…

Downloads
196
Likes
19
Rating
5
P

IKEA EKET tight snap on connector

IKEA EKET snap on connector, no more no less. V2 has rounded edges for easy assembly/disassembly I have used 20% infill, made from regular PLA. Connectors are supposed to make the alignment easier. Always secure furniture to the wall !!!…

Downloads
192
Likes
36
Rating
5
P
PrintablesMattiac

Starzinger Spaceketeers Sci-Bots El Galáctico 西遊記スタージンガー 3D

Karaktärer från den underbaraste japanska animen (TV-serien)! ^_^ Till minne av min älskade klasskompis Kristoffer. <3 Skapat av den här väldigt talangfulle och väldigt trevlige mannen: http://www.fiverr.com/rcsculpts Modellerna…

Downloads
181
Likes
8
Rating
0
P
PrintablesFokieH

Sägeketten Box stapelbar Klettband

Eine Box gedacht um Sägeketten sicher zu lagern und zu transportieren. Sie können natürlich auch für alles andere verwendet werden. Die Kisten sind Stapelbar und somit beliebig erweiterbar und können mit einem Deckel verschlossen werden.…

Downloads
118
Likes
11
Rating
0
P
PrintablesF. Jungmann

Gridfinity Ikea Eket drawer Baseplates - 70x35x35 cm

These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions. I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates. I also created some small spacers for the sides and the back.…

Downloads
115
Likes
13
Rating
5
P

IKEA EKET filament dry box

Have been wanting a dry box system that isn't the plastic boxes and I wasn't able to find any that I liked, so here is my design. It used the IKEA EKET cabinets with the glass door. It fits 4 spools of most sizes that can be printed with…

Downloads
114
Likes
92
Rating
5
P
PrintablesDaDo

EKET Connection Fitting Clip

Do you have your EKET shelves free-standing? Did you forgot to buy the connection fittings? Or do you only need a few, while the swedes only sell packs of 12? This model is your solution. Print on side for best layer orientation. Print…

Downloads
111
Likes
10
Rating
5
P
PrintablesFeveredMind

IKEA EKET French Cleat

An easy way to mount the IKEA EKET shelf to the wall. Print suggestions: 4 perimeters 4 top and bottom layers 20% infill Only hardware you need are some drywall anchors. The ones I used are pictured, but anything similar should work,…

Downloads
96
Likes
17
Rating
0
P
Printablespetrepa

IKEA EKET assortment boxes

Inspired by this design by Glaedi Needed a way to sort my IKEA EKET drawers in my bedroom. Made these boxes in different configurations. This type of drawers take x4 in the depth. This design is meant to be printed in spiral vase mode.…

Downloads
83
Likes
15
Rating
0
P
PrintablesLuis

Ikea Eket connector / Ikea Eket Verbinder

Please note that these connectors are only meant to align Eket shelves, not hold their weight. The weight they can take is heavily dependent on the used material and settigns. I do not take responability for the use of these connectors! I…

Downloads
82
Likes
12
Rating
5
P
PrintablesMaRo1976

Schleppkette, Energiekette

Simple aufzubauen und einfach zu drucken.

Downloads
76
Likes
1
Rating
0
P
PrintablesMarko2402

Parametric foot for Ikea Eket

This was inspired by: https://www.thingiverse.com/thing:5388044 . Use OpenScad to modify to your needs. (The only thing that isn't customizable is the corner radius, because I didn't want to further complicate the minkowski operation and…

Downloads
73
Likes
11
Rating
0
P
PrintablesInk

Heket's Crown

A little 3d reproduction of the Heket's crown from Cult of the Lamb I remix the model from @ShinpiMakes_277232

Downloads
66
Likes
15
Rating
0
P
Printablesszutsgy

IKEA EKET wire hook

This small hook is for hanging things like wires and other accessories under your wall mounted EKET family. Designed for 0.4 noozle, wall count is 3. If you print in PETG, it is strong enough to hold things. Bracket inner size is 17.5 mm.…

Downloads
65
Likes
14
Rating
5

Ikea Eket / Kallax legs for single unit

Sugested print settings: Start with external layers. Legs > 20% infill Can be used for both eket and kallax - for kallax use combined sides with equal length. Part of my collection for furniture:…

Downloads
58
Likes
22
Rating
0
P
PrintablesAndrzej Pisarek

Headphones holder for wardrobe Eket Ikea

Z powodu braku miejsca na biurku, zaprojektowałem uchwyt na słuchawki do szafki z IKEA o nazwie EKET. Uchwyt mocuje się do szafki bez śrub poprzez jej odchylenie i włożenie na tylny rant. Pasuje idealnie. Nie są wymagane żadne śruby,…

Downloads
57
Likes
10
Rating
5
P
PrintablesJustABiomedEng

Cable Holder for Ikea Eket - No screw, no glue

This is one of the first thing I designed. I wanted a cable holder for my bedside table made with 2 stacked Ikea's ekets, but didn't want to screw it in or use some strong glue in order not to damage them permanently. So came the idea for…

Downloads
55
Likes
10
Rating
5
P
PrintablesCulinaryDiver

Terrarium that Fits IKEA EKET

Plexiglass measurements: Front: Wide: 318 x Tall: 274mm Left-side: Wide: 224 x tall: 305mm Right-side: Wide:224 x Tall: 305mm Back-side: Wide: 330 x Tall 305 Rock decoration is printed in black PETG and hand painted.

Downloads
52
Likes
20
Rating
0
P
Printablesdaemontus

Hexagon storage system (not just) for IKEA Eket

The main motivation was to have something that can be stacked inside an IKEA Eket shelf but won't consume too much filament. This is obviously not as strong as having fully filled sidewalls, but it is still plenty strong for normal…

Downloads
49
Likes
21
Rating
0
P
PrintablesAdam

Ikea Eket Headphone Holder

Simple holder that just slides on. I recommend putting double-sided tape on the right side as shown in the third image. Print it in the orientation it is. No supports needed.

Downloads
44
Likes
6
Rating
5
P
Printableskarel8888

Ikea EKET drawers

I created custom drawers for IKEA EKET to store small items. Used print settings: Rails: Sunlu PLA 0.6 nozzle; 0.25mm layer height; 3 perimeters Drawers: Prusament Woodfill Linden Light 0.6 nozzle; 0.25mm layer height; 3 perimeters Drawer…

Downloads
43
Likes
25
Rating
0
P
PrintablesMarcelL

Ikea Eket Horizontal Divider for 230mm depth

My first upload ever:-) I Just took the original Ikea Eket Divider designed by Dallo97 and sized it down to fit in the Ikea Eket cupboard with the 230mm depth. Still four parts. Printed in PETG and PLA aswell to divide our kitchen…

Downloads
43
Likes
19
Rating
0
P
PrintablesTheParrotGuy

Cover for Ikea EKET cube

The EKET cubes from IKEA are great, but sometimes you want to hide something, like a router, NAS, or other ugly and/or blinky things in them. This cover wil do just that + it makes a nice “eyes of Sauron” effect at night, if it is used to…

Downloads
42
Likes
13
Rating
0
P
PrintablesBojan

IKEA EKET base on legs extender

I have the IKEA EKET cabinet with 2 drawers under my TV and EKET base for the cabinet was around 6-7 cm high so my vacuum cleaner robot Roomba could not go under it to fetch all the dust that gets caught there. I made 4 "extenders" for…

Downloads
40
Likes
5
Rating
5
P
PrintablesMr. T

Ikea's Billy Macbook Pro Voronoi Shelf Insert for Eket

Enhance your Eket cabinet's storage capabilities with the innovative Billy MacBook Pro Voronoi Shelf Insert. Crafted from a standard 14x10" (36x26cm) Billy shelf, this insert not only maximizes space but also adds a touch of modern design…

Downloads
38
Likes
12
Rating
0
P
PrintablesNotSoHotEnd

Ikea EKET base with legs

No drilling required to the EKET itself Results may vary, but if you can't connect the legs to the bracket try sanding down the seams. Wall line count: 3 Layer height: 0.2 Infill: Triangles @ 20% (5hrs++) per legs (4hrs++) per brackets…

Downloads
37
Likes
15
Rating
0
P
PrintablesTiMake3D

Energiekette 17x14mm

Energiekette 17x14mm

Downloads
36
Likes
4
Rating
0
P
PrintablesMikkel Schmidt

IKEA Eket Assortment Boxes

I designed these assortment boxes for IKEA Eket drawers to hold all your screws, bolts, nuts, washers tools and everything else you can think of. They fit in a grid of 12x5. Fits standard DYMO labels on the handles at the top. Hope you…

Downloads
35
Likes
6
Rating
0
P
PrintablesMarshe

Ikea Eket power strip mount

Power strip mount for the underside of the IKEA EKET storage cube Works with most EU power strips (or ones that looks similar to the one on the picture) I tested 3 different brands, and they fit them all. Mounts on the backside of the…

Downloads
31
Likes
11
Rating
0
P
PrintablesMotorboatMe

30° angle 31.5cm long 12.5mm wide LED strip mount (sized for IKEA EKET)

I wanted an angled LED strip mount to light up the inside of my IKEA EKET cabinet from the front and hide the strip for a tidy look. Found the original model, played around with it in Blender to extend it to cabinet's inside full length…

Downloads
31
Likes
9
Rating
0
P
PrintablesJan de Graaf

Filament spool holder for IKEA Eket cabinet

I was tired of swapping my most used PLA spools on my mk4 spool holder. I have an IKEA Eket cabinet above the printer so there would be space for hanging the spools and could print directly from there. But nothing simple was to be found…

Downloads
28
Likes
14
Rating
5
P
Printablestkramm

IKEA EKET Adjustable Foot

Print it, put a M8x50 Hex-Bolt in and replace the originale screw-adjustment. Enjoy your vacuum robot fitting below your furniture. :) IKEA Article Number: 704.289.04 https://www.ikea.com/de/de/p/eket-bein-metall-70428904/

Downloads
23
Likes
6
Rating
0
P
PrintablesGiacomo Bon

IKEA EKET wall mount adjustable

Adjustable Wall Bracket for IKEA EKET Cube Shelf This is an adjustable wall mounting bracket designed specifically for IKEA EKET cube shelves . Recommended printing materials: ABS or PETG for best strength and durability PLA+ is also…

Downloads
23
Likes
8
Rating
4.5
P
PrintablesWouter AB

IKEA EKET leg extenders

Our robot vacuum kept bumping into our IKEA cabinet because it was too high for the Lidar to see and too low to drive under. That's why we decided to raise the cabinet two centimeters. the adjusting screw has to be removed from the leg…

Downloads
22
Likes
4
Rating
5
P
PrintablesSzudas

IKEA KALLAX,EKET legs

Furniture leg (30*30*100mm) Fixed against rotation in the middle and in one corner

Downloads
22
Likes
5
Rating
0
P
PrintablesJannomag

Ikea Eket distance piece

My ocd was screaming after I've mounted an Ikea Eket to the wall using it's official wall mount. The gap between cabinet and wall was uneven. I didn't want to create a complete new mounting methoth to remove the gap so I just created a…

Downloads
19
Likes
2
Rating
5
P
PrintablesGiorgio

EKET 10 inch 7U rack

With this model you can build a cheap and nice-ish looking rack that's also more flexible than off the shelf alternatives with fixed width. You'll need an Ikea EKET (25 or 35cm depth, your choice) and 4x 6U or 7U posts (eg…

Downloads
19
Likes
2
Rating
0
P
PrintablesPrintedPixels

Heket - Cult of The Lamb

Heket - Cult of The Lamb Heket's bishop form from Cult of The Lamb. Original model designed by SteD on Sketchfab, linked below https://sketchfab.com/3d-models/cult-of-the-lamb--bishops-b1ba9e4833db4d5ba8e1d6a0fb33ef75 Models have been…

Downloads
17
Likes
6
Rating
0
P
PrintablesReversio3D

Ikea Eket mirror stand (

Ikea Eket mirror stand ( Ikea LOTS mirrors 12" x 12") With the right filament match, this simple design hold the mirror and almost disappear in the cube. 2 parts each side , the tallest 191mm Hardware required : 2 small wood/metal screws…

Downloads
16
Likes
3
Rating
0
P
PrintablesNekurok

IKEA Pax / Eket connector bracket

Bracket for connecting IKEA Eket to IKEA Pax furniture from the back. I wanted to save the stack of Eket cubes from falling over without drilling into the wall. Since they stand next to a Pax wardrobe i designed this bracket to mount them…

Downloads
16
Likes
7
Rating
0
P
PrintablesStefan Frambach

Ikea Eket drawer interior

I made these inserts for the Ikea Eket drawers, i made them for my own use, and some extra “empty” ones for multi purpose uses. If u stack two low ones on top of each other, it wil be same hight as the high ones. Passport holder has is…

Downloads
15
Likes
4
Rating
0

Ikea Eket Cube Shelf

This model adds a L-shaped shelf at half-height on the Ikea Eket cube, without the need for screws. On the full side, it fits an Ikea Skubb (long one, 28x14x13 cm|11"x5 ½"x5"), it makes it easier to use the full depth of storage. If the…

Downloads
14
Likes
11
Rating
0
P
PrintablesVelda

IKEA EKET Leg Extender with Screw Hole

This 3D printable leg extender allows you to easily increase the height of your IKEA EKET cabinet. It uses the original screw that comes with the leg for height adjustment – simply attach the extender through the hole, and it holds…

Downloads
13
Likes
3
Rating
0
P
PrintablesMP makes

IKEA Bestå/Eket spacer

This spacer is intended for use with IKEA Bestå/Eket adjustable foot ( https://www.ikea.com/no/no/p/eket-fot-justerbar-metall-70340044/ ) if you need to adjust the height difference more than the standard range. Simply place the spacer…

Downloads
10
Likes
2
Rating
5
P
Printablesdarthvader85

Ikea Eket MMU Setup

Here you can find the Model Data for the spoolholders and the mounting aids to mount the PTFE feed through and the hinge for the eket cabinet.

Downloads
9
Likes
6
Rating
0
P
PrintablesN13L

Lifter for IKEA "EKET" furniture leg

Lifter for EKET legs so you can fit shoes under the furniture. I suggest adding double sided tabe on top of the part.

Downloads
9
Likes
2
Rating
0
P
PrintablesJPMakesStuff

Charging station for multiple devices based on Ikea EKET

Ikea EKET offers a nice box size with options for feet or wall mounting and it comes pre-painted. The Ikea KALLAX wasn't really designed for this but can be cut down (pictures in description) to work for this design and again is…

Downloads
7
Likes
4
Rating
5
P
PrintablesThoughted

Basit Sarkaç Hareketine Yardımcı Stant Tasarımı

Basit Sarkaç Hareketine Yardımcı Stant Tasarımı

Downloads
7
Likes
0
Rating
0
P
PrintablesLeandro

Eket Leg Extension

I built a table platform for the traditional raclette we often eat in Germany on New Year's Eve. For this, I bought a wooden board and the 10cm EKET screw-in feet from IKEA. However, these were a bit too short for my liking. After all,…

Downloads
5
Likes
1
Rating
0
P
PrintablesSatellietje

Boldog Ünnepeket – Holiday Lightbox

👍 Do me a big favor and hit the Like button! ✨ Bring a warm, festive atmosphere into your home with this unique lightbox! The text “Boldog ünnepeket” – Hungarian for “Happy Holidays” – shines beautifully through the diffuser, making this…

Downloads
4
Likes
0
Rating
0
P
Printablesmkosiedowski

Ikea Eket filament spool holder (for Prusa Mini+)

My Prusa Mini+ fits nicely on top of an Ikea Eket shelf. This spool holder allows to keep my printer on the right-most shelf and hang the filament spool on the right side of the same shelf on which the printer stands. It just slides on…

Downloads
3
Likes
2
Rating
0
P
PrintablesAlbin

Skådis door for Ikea Eket

Uses the mounting hardware from the original door. One version with a rim for increased rigidity and one version without.

Downloads
3
Likes
6
Rating
0
P
PrintablesVassilis

Longer Internal Connector for 35cm EKET

The model was designed for the 25cm depth EKET and I needed one for the 35cm depth.

Downloads
2
Likes
0
Rating
0
P
PrintablesJasper Zwart

IKEA Eket horizontal divider

Simple corner supports for dividing an IKEA Eket in two. It holds a thin MDF plank as a horizontal divider, halfway the Eket cabinet. Print settings No special print settings used. Infill and wall settings to your preference, 15% infill…

Downloads
1
Likes
1
Rating
0
P
PrintablesVelda

IKEA EKET Extended Leg – Full Leg Replacement (+2 cm)

A complete replacement leg for the IKEA EKET cabinet with a built-in 2 cm height extension. Instead of stacking an extender under the original leg, this prints as a single solid part. It raises the cabinet by 2 cm, so a robot vacuum can…

Downloads
1
Likes
0
Rating
0
P
Printables

EKET Connection Fitting Clip

Do you have your EKET shelves free-standing? Did you forgot to buy the connection fittings? Or do you only need a few, while the swedes only sell packs of 12? This model is your solution. Print on side for best layer orientation. Print…

P
Printables

Terrarium that Fits IKEA EKET

Plexiglass measurements: Front: Wide: 318 x Tall: 274mm Left-side: Wide: 224 x tall: 305mm Right-side: Wide:224 x Tall: 305mm Back-side: Wide: 330 x Tall 305 Rock decoration is printed in black PETG and hand painted.

P
Printables

Basit Sarkaç Hareketine Yardımcı Stant Tasarımı

Basit Sarkaç Hareketine Yardımcı Stant Tasarımı

P
Printables

Ikea Eket / Kallax legs for single unit

Sugested print settings: Start with external layers. Legs > 20% infill Can be used for both eket and kallax - for kallax use combined sides with equal length. Part of my collection for furniture:…

P
Printables

Ikea Eket Gridfinity Base Plate

A Gridfinity base plate for an Ikea Eket drawer. The spacer is positioned at the front in my setup, as this provides easier access to the back, but it can be used either way. If your printer struggles with tight tolerances or if your Eket…

P
Printables

Ikea Eket Gridfinity Spacers

This Gridfinity spacer is a modified version of the Ikea Eket Gridfinity Baseplate , designed for fitting in an Ikea Eket drawer. In my setup, I place it at the front for easier access to the back, though it works in either position. I…