157 models
Got a Elfa Classic Wide Drawer Solution from the Container Store? Did the clip break? Of course it did. This is a remake of the clip. It's a little thicker than the original by ~0.5mm for more strength. Print it PLA or PETG (the latter…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
I whipped up this mount to hold a Google Home Mini vertically on an Elfa Utility Board. It's similar to other designs I observed with the exception of the specific hangars needed for the Elfa product. The model I used to create this was a…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
This is a model to hang 7 screwdrivers. It's a remix of https://www.printables.com/model/57007-elfa-utility-board-wera-micro-drivers-hanger which I found to be an excellent model. My OCD compelled me to do this since all of my mini…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
The design is tight fit so you either have to push it in of do some sanding if you want a looser fit. Distance between the hooks is 7.1mm Total length 56mm Mine is printed at 0,3mm with paint on support for the hooks.
While optimizing the placement of instruments on the pegboard, the original clips broke frequently. I created a version with enhanced spring strength and was pleased with their survivability. The original model can be found here…
Es kann supportfrei auf einem XL Drucker gedruckt werden. Leider ist es zu gross für einen MK Drucker. Bitte mit PETG, ASA oder ähnlich Drucken, PLA wird sich im Sommer verformen. Wenn eine andere Fachunterteilung gewünscht wird, bitte in…
Printed on a Bambu Lab A1, 0.2mm Standard profile, but changed speed settings as followed: Outer wall speed: 150mm/s Inner wall speed: 200mm/s But you can also use your speed settings - My idea behind the changes was to maintain a…
Who's got two thumbs and an Elfa Utility Board? I guess that's me. I really like the board, it's cool to have the peg board option and the ability to use magnets. However, since Elfa didn't ask me what I thought would be necessary in…
Elfa Shelf Hooks, six different variants. Double hook, thin, wide and two versions of a hat hook. I know that they are not solid/water tight, but for me with Cura they print fine. Print Settings Rafts: Doesn't Matter Supports: Yes…
10cm small tool cup for Elfa pegboard. You need (!) to print one pair of Elfa module clips
Sufficiently sized convenient and practical cable organizer of different thicknesses for Elfa a pegboard. One pair of clips is required for mount to a pegboard
Dual Tape Holder for ELFA pegboard. Required one pair of module clips https://www.prusaprinters.org/prints/60471
only for elf bar elfa its eazy to prin no suports neded.
Use this to make your own Elfa-compatible accessories!
Another caliper holder for Elfa pegboard. You need (!) to print one pair of Elfa module clips
A simple, heavyish-duty hook that creates a small (3mm) light duty hook through two holes in an Elfa-brand pegboard. I also have designed a light duty version.
Very simple spool holder. No joints or assembly required. Just a minimal amount of support. Not really tested for extreme weights, but seem to strong enough for at least one kg spools. I've only printed it with 15% infill too. Made with…
Simple clothing hook. Clips on to the Elfa wire shelves that the Container Store sells for custom closets. The hook can slide forward to hang things or backwards to be out of the way. Able to hold a shirt, pants or hat. Not for heavy…
This is a grippy friction tool holder styled after the Elfa Utility organizer system . Simply push the tool into the rubber on the bracket and it will snap shut holding the tool. It can hold hammers and some yard tools like rakes. It can…
I wanted a tape reel for some various adhesive fastening products to hang from the Elfa utility board I have hanging above my work bench. My goal in the design was to create something as sturdy as possible, using the minimum amount of…
I was looking to organize my 3D printing tools... and a few other things. I remixed this from two different post. The Rotary tool was edited to fit my accessories and needed bracket for Elfa System. I designed a basic hook to hang tools,…
A print to hold a label on an Elfa or similar thickness shelf to help with organization. For shelves ~0.75 in or ~19 mm thick. The model prints in two pieces (the clip and the label holder). Can either snap together and leave as is or add…
This is meant to hold six tools on an Elfa Utility board. It's an attempt at minimizing the space it takes up on the board by projecting the tools out in front. The diameter of the holes are 22mm. I'm pretty happy with how this is working…
Eine Ablage für Revell Farbtöpfe mit Ablage und breiten Fach für Pinsel etc. Farbtopfdurchmesser 310mm Stützstruktur wird nicht benötigt
I made an alternative tape dispenser body for the Elfa Utility Board Tape Dispenser I posted. NOTE: This model is just the Tape Reel body. You'll need the rest of the parts from the main design. This version has the modeled in serrations…
Should print standing up without supports (made sure to not have angles over 60 degrees from the bed). Also provided it's a large version that should work to hold a mallet as long as it's made of rubber or wood, I think that a metal…
After making my successful Elfa hook ( https://www.thingiverse.com/thing:3367198 ), I wanted some shelf/bowl for smaller items (keys, wallet, etc.). Made this bowl to fit in a corner. Printable without extra support when put on its side.…
I've got some Elfa shelves hung above my desk in the office. I get a lot of use out of them including using them to hang various items underneath. So after knocking my other hanger from the edge of the desk for the Nth+1 time, I decided…
Easy 83mm small cup for Elfa pegboards. Required one pair of module clips https://www.prusaprinters.org/prints/60471 Based on remix of https://www.thingiverse.com/thing:2576053
DE: Hier ein Kugelfangkasten aus drei Teilen. Natürlich NUR für Co2 und Luftdruckwaffen! Problemlos bei ~7,5 Joule! Kugelfangkasten aus Nylon (PA12CF15] Einlage aus 3mm TPU, als dämm und Durchschlagbremse. Äußerer Haltering aus TPU. Für…
A "Elfa" mount for Ryobi Charger, created just to have a clean desk.
Simple, does what it says. You will also need to print two of these Elfa Pegboard Clips . The pens are canted-out a few degrees to make them easier to grab.
You will need a pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard The spouse wanted an "arsenal" of Elfa pegboard accessories to choose from. This is a little shelf I…
ENG This holder offers 8 places for ELFA e-cigarettes and/or their pots. It was created to store or set up 2 vapes and 4 pots (one in the vape and 3 in the holders). DE Dieser Halter bietet 8 Plätze für ELFA E-Zigaretten und/oder deren…
Handy transport box for the ELFA Suitable for 4 pods or two pods and an ELFA. So you always have everything together. I have uploaded a version with threaded insert and a version without threaded insert. Print settings: - Layer height 0.2…
Sleeve to customize your Elfbar Elfa. The Sleeve features a hole for the charging port. I printed this on my BambuLab P1P in Spiral / Vase Mode and 166% speed. It took around 10 minutes. You will only need about 2,5 grams of filament.…
This is a 3D-printable shelf bracket designed to fit Elfa wall double rails . It’s available in two lengths — 150 mm and 240 mm (total length including hanging hooks)—and in two versions : With stopper – helps prevent items (e.g. skis,…
The narrow Elfa Utility box is kind of a staple in my implementation of the board. However, I wanted to be able to divide the space better to handle different items in groups. I'd originally designed this , which worked okay, but wasn't…
I needed a place to hang my hoodie, but I couldn't just use an ELFA hook because all of my rails have shelves on them. I needed the hook to extend off to the side of one of the rails... so I made one. I call it a "Hoodie Hook" because it…
Do you have a set of Wera Micro Drivers, an Elfa Utility Board, and the need to hang the drivers somewhere? Then this is probably something you might find useful. I decided that some of my previous designs for holding tools on the board…
I recently installed some Elfa drawers in my closet, unfortunately they did not fit in the current system I had in there so I designed some feet to correct for the height displacement. I have attached the 3mf and the stl. You should be…
NEW IMPROVED VERSION This is a snug-fitting case for reusable Elfbar Elfa vape pens, designed with two main goals in mind: Prevent leaking cartridges from making a mess in your pocket or bag. Trap the strong smell that some cartridges…
Need 2x 50mm M4 and 2x 30mm M4 with 8x M4 brass nut. It is possible to either fasten the bracket to the AMS with small and long wooden screws or have it loose and just place it on the bracket. Original idea is to fasten the bracket and…
Filament spool holder to easily hang on ELFA rails next to your printer, also fits on their wall board with same holes. Convenient way to hang filament spools if you have your printer on such a shelf system. Uses a piece of 4mm PTFE tube…
This is similar to the original version, but with a much thicker mounting clip in order to avoid breakage.
Quick-n-dirty meld of a wall cleat for mounting Reprack to the wall and Simon's hook for Elfa shelving units. Recommend printing with supports and in PETG. “It ain't pretty, but it works.”
A simple, light-duty hook that creates a small (3mm) light duty hook through two holes in an Elfa-brand pegboard. I also have designed a heavier duty version.
Easy print EIBOS 3D Filament Vacuum Pump holder for Elfa pegboard. One pair of Elfa Module clips https://www.prusaprinters.org/prints/60471 is required to install on a pegboard.
Concepto de Diseño Esta "Figura de Elfa Yoga" encarna la tranquilidad y la paz, presentando a una elfa en una serena postura de yoga. El diseño enfatiza líneas armoniosas y rasgos elegantes, capturando una cautivadora sensación de calma y…
Tiefenstop Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Der Inbusschlüssel wird von unten mit einem Magnet gehalten. Tiefenstop→Wolfcraft Filament: Verbatim grau PLA
The new Elfa top rail is not designed to prevent the hanger rail from accidentally being pushed up. (I'm guessing materials cost and manufacturing savings.) So instead, I designed a clip that will prevent the hanger from being nudged off.…
Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA
Ich habe für das Werkzeugfach meiner Vespa eine passgenaue Schublade konstruiert, mit der sich der vorhandene Platz deutlich besser nutzen lässt. Sie bietet eine einfache Möglichkeit, Schlüssel, Kleinteile oder anderes Zubehör ordentlich…
Having an ELFA storage system in the house is nice, but expensive to get new parts. Thought a simple hook would be good, but paying $1 or whatever seems overkill. Designed this hook to carry my backpack (or whatever) and fitting in the…
This silly wire shelf is perfect except one thing - the shelves keep falling out and don't glide gracefully. Inserting these items helps - snap the pipped ones in the front and put the pipless ones in between (may need to use tape or…
To add to my ongoing series of Elfa related accessories . I created this simple divider for the narrow Elfa bins. It allows for additional organizational options and for the contents to stand more upright. If you'd like to make them fit…
Fahrgestell für Playmobil Odelfass 1977. Es fehlen Teile wie z.b. der Werkzeugkasten! Falls ihr den Rahmen daher noch ändert wollt habe ich euch die Fusion 360 Datei in den Anhang gelegt. Viel Spaß damit
Kugelfangkasten mit Zielscheibenhalter vorne, zusätzlich werden Lamellen eingehängt zum Abbremsen der Kugel
This is a snug-fitting case for reusable Elfbar Elfa vape pens, designed with two main goals in mind: Prevent leaking cartridges from making a mess in your pocket or bag. Trap the strong smell that some cartridges emit, especially for…
Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man auf Streichhölzer oder Zahnstocher schießen kann. Der Abstand zwischen den Streichhölzern / Zahnstochern beträgt 10mm, sollte Bedarf an mehr…
This is a marker and eraser holder with an optional attachment to an Elfa pegboard. It holds 16 markers and an eraser. It took me about 2.5 days to print in PETG with 0.10 mm layer height. I printed it with the “Whiteboard Markers”…
This little clip locks a shelf into an Elfa shelving unit, preventing the shelf from lifting up.
Simple bin to store the lost mary tappo device. Single slot bin easily prints in all kind of settings and material without support. Print Settings Photo: 0.4 Layer Height, 0.6 Width, 15% Infill
Print the clip Press the clip onto the Back Stop pins Personally, I printed these in PETG, but feel free to experiment with other materials. Enjoy and feel free to let me know how it goes or any potential suggestions!
Our pantry is becoming extremely cluttered on the floor which includes box of Costco K-cups so I wanted to hang them under the Elfa shelving system. Print two instances to fit in each section of the shelf front to back allowing for six…
Broach Files Holder for Elfa pegboard Required one pair of module clips https://www.prusaprinters.org/prints/60471
Hakendreher Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Ich wollte den Hakendreher von Festool unbedingt im Deckel haben: Damit der in den Deckel passt, muss er leider mit einem Winkelschleifer oben/unten etwas…
Für Ablage von Vape, Münzen eine Ladekarte und ein Fach für Geldscheine wenn man welche hat :P Passt genau genug, kein rutschen oder ähnliches, aber könnte besser sein. Druck: fürs Auto muss Hitzebeständiges Filament Genommen werden (ich…
Thinner versions of the Elfa Pegboard mountable Gridfinity base plate based on jevans84's original 2x5. Created new 1x5 and 1x3 for less depth to work better with windowed boxes. Also provided the OpenSCAD file used to generate based on…
I thought Jerrari’s modular storage system looked really neat, but most of the storage in my garage is all done with Container Store’s Elfa 24” ventilated shelving. I decided to try designing a simple top bracket that would snap into…
This needs those clips to attack to the board.
You will need a pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard Supports will be needed.
Ein eleganter Gridfinity-Halter im 2×3-Format, entworfen für maximale Funktionalität: Er bietet sicheren Platz für 8 Pods und zusätzlich Stauraum für 9 Fläschchen à 10 ml Liquid – alles übersichtlich organisiert und stets griffbereit.…
Print standing up. No supports required. More perimeters, the better. Designed so that the “last” hanger or two sits on the stop itself, holding it more in place. The rod used for the ELFA is 25mm - this design is 24.5mm, so snaps on…
You will need a pair from the elfa clips from this model https://www.thingiverse.com/thing:4060473
A mount for up to 3 ELFBAR vapes. I mounted it on the bottom of my monitor-raiser but you can also mount it under a desk.
You can get the elfa hooks here . They should keep it stable as the original version.
Schutzkappe für ELFA Master
So, my wife and I have long used the house rule of welfare in the Settlers of Catan game. After printing amazing tile holders for the game, she asked me to print Catan Welfare tokens. This is the design that I used. We had always used…
The source marked this model as adult content.
an amazing toolhead BL is 0 Y offset ofc step file included for anyone who wants to remix
This is a simple item that will hold a typical LED remote in a housing which can be mounted to the Elfa Utility Board products. Keeps it really handy if you, like me, have your lighting over the workbench and want to quit looking for the…
Staub-Deckel für Elfbar Elfa Master – 850mAh Pod-System
A case for the elfa-stick. Possibility to put in a M5 washer, so it will be able to be put on magnetic phoneholder in your car. Eine Hülle für den elfa-stick. Die Bohrung auf der Innenseite ist für eine M5-Unterlegscheibe. Damit haftet…
I've tried a number of different approaches to hanging my pliers and nippers and none of them really satisfied me. I think that finally inspired me to take another approach and this time, I think I'm close to what I was hoping for. After…
Printed in PETG. 0.4mm nozzle. 0.2mm layer height. I whipped up some hangers that fit perfectly on the .25" in front bar of the Elfa shelving I have in my office.
For the original, smaller sized, spool support, visit the original model at Thingiverse .
You will need one pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard Modeled around a Samsung A15 with a case on. Other phones may fit, as long as the width is 85mm wide…
Halterung für vertikale Steckdosen mit Kabelfach zur Aufbewahrung von Kabel. Das Kabel wird durch den Loch hinten durchgesteckt und von unten mit kreisförmigen schleifen reingesteckt. Am Schluss wird der Stecker in das Netzteil gesteckt…
Nice stable mount for a Wyze Cam v3 to the now-discontinued version of the Elfa Top Track (e.g., here ). Note that this model does not have the snap-fit features to make it click into place on the Top Track, it just stays in under gravity…
Using plastkort's Elfa mount, I added an oversized spool to hold our vacuum hose. It's kind of a silly thing, but it works pretty well for our mini canister vacuum with a 8 foot hose. Print Settings Printer Brand: LulzBot Printer: TAZ 6…
Does what it says. Designed specifically for a TI-1250 vintage calculator. Probably would work for lots of smallish calculators though. Requires 2 of these Elfa pegs also.
What it says on the label. after cutting out a few sections between holes on your Elfa pegboard, this bezel snaps into place and protects your cables from any sharp edges. I cut my elfa with a dremel cutoff wheel. This bezel protects a…
