17,072 models
support needed coz of claws. i printed mine on 0.15 but on 0.2 will look great also. Orginal Link: https://www.thingiverse.com/thing:5222826
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
Print approx. €9.97–€12.19 excl. taxPreliminary estimate for one variant
Update 19-Nov-2024 : Added IL version Update 02-Apr-2024 : Added CZ version A removable trolley coin for EU/US/CA/AU/UK/CZ/PL/IL carts. This allows you to remove the coin after unlocking the trolley for your shopping. Although there are…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
Hello, Today I have Demogorgon for you - a monster from the movie Stranger Things. It is a really faithful copy of the famous monster from the movie. It is also suitable for coloring, or for a diorama with the theme of the upside down…
Print approx. €8.57–€10.48 excl. taxPreliminary estimate for one variant
Hi, this is the tick removal coin. Unfortunately, there are a lot of ticks in the area where I live, which is why I designed this tool. With these coins, you always have a tool at hand to help remove ticks. You simply push the coin over…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)
Print approx. €6.36–€7.77 excl. taxPreliminary estimate for one variant
The most emotional robot ever of the Otto family is back!. Thanks to our own developed LED “Eyes” combined with all te dance moves, touch sensor and sound gestures of all the other Ottos. you will be able to program your STEM robot to…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Poop Emoji
Print approx. €17.83–€21.79 excl. taxPreliminary estimate for one variant
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
Also tested with other charging ports Inspired by the box openers
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
When I read the blog post for the “Quick and Useful Prints” contest I saw it as a cool opportunity to design a Maker Faire booth demonstration print and giveaway item. One of my favorite memories from my first Maker Faire was getting…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
Description Kid request… This is just a decorative plaque featuring the Pokemon logo. I have included 2 gcodes. The first is a 1 color print. The second is a 2 color print that does not require an MMU, only a color change. STL also…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Nemo
Print approx. €8.12–€9.92 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €17.13–€20.94 excl. taxPreliminary estimate for one variant
Rock Remote Holder Keep your space tidy with this rock-style remote holder , a decorative organizer that blends perfectly into your home while keeping your essentials within reach. 🪨 Designed to look like a natural stone, this model hides…
Print approx. €9.04–€11.04 excl. taxPreliminary estimate for one variant
Simple Idea but big help! SINCE 2021 → I'm the original Inventor of this idea! Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG. Infill doesn't matter. Layer high 0.1. *Don't push to…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
RIP Stan, you were like the Grandpa I always wanted. While very sad he has passed, at 95 he lived what many of us can only hope to live and achieve and that is a long and full life. A very big influence on my childhood and all the way…
Print approx. €9.67–€11.82 excl. taxPreliminary estimate for one variant
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a medium-difficulty puzzle that I enjoyed solving many years ago! The goal is to remove the center ring. No force is necessary. I designed it primarily in Fusion 360. I printed it with Reprapper grey and Atomic purple PLA. Note…
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for one variant
You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
Box for pokemon card 3D effect
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
The lower part of the box is as simple as it gets. just hit print and voila! I print at 0.2 layer height and the pokemon logos on the sides come out great. The multi colored lid on the other hand requires supports and color changes at the…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Sussie : Kpop Demon Hunters. Magpie I was going to put this in Myclub but I lost my eye and rushed it and then gave up. So I will leave it here. Lots of missing details… and the legs are cattywampus… the ridge line bothers me. But I just…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
Unlock and Go! 🛒 The ultimate shopping hack. Insert, unlock, and remove - no more searching for change or leaving your keys hanging from the cart. Precise clone of the official manufacturer's key. Works perfectly with 1€ carts. Perfect…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
This box is designed to enclose an ESPSomfy-RTS remote, an ESP32 based project allowing you to control Somfy shades over WiFi or via HomeAssistant (see YouTube video ). The case can also be used for any radio project consisting of an…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Print & acrylic draw
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Meowth Pokemon Go
Print approx. €19.97–€24.41 excl. taxPreliminary estimate for one variant
B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €11.36–€13.88 excl. taxPreliminary estimate for one variant
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
I Wanted to double sided tape it so I needed a version without the reinforcement behind. So I've slice it in PrusaSlicer. And I've print it at 102% (When you play with scale more than once in prusaSlicer this scale add up! be sure to…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant
Cardbox with dividers. no supports needed.
Print approx. €10.86–€13.27 excl. taxPreliminary estimate for one variant
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
The remover has no blade it uses some little PETG teeth as a saw. You can print the handle and the remover in different colours and after that you can screw both parts together. The 10 mm screw ist well protectet. It is a PETG "appliance"…
Print approx. €1.08–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
I myself designed this device to aid in catching the pokemons Maybe you too, would like to catch the pokemons I printed at .15 mm layer height with organic supports I eliminated my speaker to make room Link to micro switch → Switch There…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
I've designed this tiny case for the easy use of led strips, the three pin connector is for the strip, the microcontroller is powered over the led strip. What you need additionaly: a pair of M2 x 8 or M2 x 10 or M2 x 12 one JST XH-3P-M…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Removable Shopping Cart Coin: A Convenient Tool for Your Shopping Needs Product Description: The removable shopping cart coin is an essential tool for your everyday shopping trips. This cleverly designed keychain not only holds your keys…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Very basic remote control holder for the Ikea Skadis. If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €10.42–€12.74 excl. taxPreliminary estimate for one variant
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Print approx. €6.49–€7.93 excl. taxPreliminary estimate for one variant
You absolutely need to use arachne/variable extrusion width to print this. The outer walls vary from 0.38-0.6mm to provide the snapping action for the lid while still using only 1 “perimeter” to allow fast printing. The reset and…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
Wii Racing Handle This is to help those who have trouble gripping the Wii remote, and can be used as a steering wheel addon for Wii racing games! It should be printed at 0.20mm or better, and at 5% or more infill, All that’s needed for…
Print approx. €3.31–€4.05 excl. taxPreliminary estimate for one variant
Just an interpretation for the ear saver
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have Pokemon Pikachu for you. It is really nice and realistic, suitable for coloring. It prints really well. I used PLA/PETG Basic as the material No need to use supports…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Recently I received some strips of RGB lights. A few days after putting them up I found myself loosing the remote quite often. I needed a simple, good looking, remote holder to stop me losing the remote in future. I hopped online and…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Print approx. €16.29–€19.91 excl. taxPreliminary estimate for one variant
This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, … On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the…
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
I designed this enclosure for my project "Temp2IoT". It can be equipped with a WeMos D1 mini and provides cable outputs for a USB cable for power supply and another for a DS18B20 temperature sensor. After assembling the two parts of the…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear. The holes are designed for 8mm diameter shafts, and the free gear sits…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Original wrist rest design for the 3DConnexion SpaceMouse®. The ‘scales’ are printed as seperate parts and friction fitted to the main skeleton part. I also included a g-code version for the skeleton and scales on one plate. I included…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Designed to be light and stylish, can be freestanding or wall mounted with a 3M Double Sided Sticky Pad (15mm x 15mm) Easy to print and shouldn't require a brim or glue, but that depends on your printer. Only 11g of filament needed,…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
PLA nozzle 0,4 layer height 0,25 vasemode I printed out colored rings for my daughter so she could put together her own version :-) . If there is interest, I will gradually add more textures
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Tool for easy removal of the Gopro Hero 9 Lens
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Designed to print with a 0.4 mm nozzle at a 0.1 mm layer height.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is the Tank Demolior Class Heavy, “Deathhead II ” as inspired in book four of the “Mongruxx” Novels (Mongruxx Until We Cross This Bridge Again). For all of you SCI FY tread heads out there. Designed on Tinkercad, the chassis/Treads…
Print approx. €8.12–€9.93 excl. taxPreliminary estimate for one variant
Do you or your kids like to play Pokemon? Are you tired of having damage counters cluttering up your gaming surface and getting lost all over the floor? Then download and print this Pokemon damage counting dial. This dial counts in…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
A quick and easy to print stand for my Hisense smart Roku TV's remote that holds it up at 15 degrees off vertical.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
The base isn't necessary when the door is kept in a closed position. Dimensions: Height: 16.4cm Width: 8.73cm Depth: 1.465cm Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5 (for strength). Print-in-Place. No…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
LG remote stand to hold remote vertical. This was designed with a 2017 OLED C7 series remote. This should work with many models / years. Features Weighted stand (add metal weights) Non-slip base (add furniture pad) Part Links Weights 3/8"…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
You can pull it out when the shopping cart is unlocked. Prints in PLA or PETG. Print settings: Nozzle: 0.4 Layers: 0.2
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
This is a bin that slots into the left frame extrusion on the Prusa i3 MK3S+. It is useful for catching scraps from the extruder as filament tends to drop between the heat bed and the left Z axis motor. It is designed to be easily…
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €7.15–€8.74 excl. taxPreliminary estimate for one variant
Show off your Pokémon cards in style with our Toploader Card Stand! Perfect for displaying your favorite graded or sleeved cards securely. Download and print your own stand today! Additionally, the logo can be printed separately without…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Printable (2D) smileys. You can choose the size by scaling them up (recommended at least 200%) Add 1 color change (from yellow to black) at the right layer height. You can also download the .3mf file to get all STL's on your build plate…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
LCD control software on Github: https://github.com/janfitz/Arduino-Wemos-WiFi-keypad-shield-Bitcoin-ticker
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip to fix an ESP to get the dust values from the device via WLAN. PLA - no supports - 100% infill
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I do use an enforced support for the center part of the shell only. (see pictures)
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Für meine LED Streifen habe ich eine Fernbedienung. Damit diese nicht irgendwo herum liegen habe ich mir eine Halterung konstruiert, inkl diversen Befestigungsmöglichkeiten. Die Halterung kann mit den beiden oberen Bohrungen direkt…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
** Brand New Update! * FireTV w/Tile Remote Cover - Alexa Voice Remote version 6 or V6. I have updated the fit and finish completely and now it fits perfectly printed in PETG and PLA. This is a battery door replacement so you need to…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET
It's a simple Cover for memory to send it via postage or transport it. Layer-Heights: 0,2mm Filament: PETG (maybe PLA is possible, too)
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Stan Lee Memorial Print Remix (3mf Ready to Print by TIXEN) This is a REMIX from: https://www.prusaprinters.org/prints/1439-stan-lee-memorial-print made by Hex3d https://www.prusaprinters.org/social/4304-hex3d/prints .3mf Ready to Print…
Print approx. €10.58–€12.93 excl. taxPreliminary estimate for one variant
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Print approx. €1.53–€1.86 excl. taxPreliminary estimate for one variant
MagiKarp : Pokemon
Print approx. €11.14–€13.62 excl. taxPreliminary estimate for one variant
An automator Clip for the Pokemon GoPlus, so you dont have to press the button for every catch or Pokestop. Print instructions On the Mk3 you can print it with or without supports, both work just fine. I suggest you print it in PETG…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €8.11–€9.92 excl. taxPreliminary estimate for one variant
A simple case for a complete motion sensor setup using a Wemos D1 Mini ESP32, AM312 PIR sensor and a simple light-dependent resistor. Hardware list: Wemos d1 mini esp32 (or equivalent) AM312 PIR Light-dependent resistor Note: Supports…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Relive the nostalgia of the iconic Pokémon battle that started it all with this detailed diorama of Nidorino vs. Gengar! Capturing the intense face-off from the legendary Pokémon Red & Blue intro, this piece brings the battle to life with…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for one variant
I have BeQuiet! Dark Rock 4 CPU cooler in my PC, which is quite massive, combine it with quite close PCIE 16x slot and you end up with GPU you can't easily take out of your PC without breaking something, or removing the whole CPU cooler…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
