304 models
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough (the layer adhesion is too weak when flexed), so I've adjusted them, so that the frisbee is as flexible as possible without…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for PETGSource material: PET
This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of @MaxTs Slightly Over Engineered Trash Bag Roll Holder with additional door hooks that allow the holder to attach to any standard Ikea kitchen closet door without any glue or screws. The door hook's inner dimension is…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
Boya BY-M1 might be the perfect starter microphone, but the chord is much longer than I’ll ever need. And if you have one, you know you need to carry extra batteries. So, I over engineer with this #3dprint wrap where the mic and the audio…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
Context After searching for a good HomePod Mini wall mount, I always encountered the same issues. either no cable management, or hanging below the socket, and most important with all the weight on the tiny Apple charger. Why yet another…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Was looking to print/build some DIN rail mounted trays for some drill bits and drill-adjacent attachments. Been using @Mavric_35887 's model for a few raspberry pis and a fan on DIN rails, so it felt like a good base for tweaks. Thanks…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Works on Curved Surfaces Print In Place living hinge magnets will “conform” to curved surfaces of many different diameters. Required hardware 3 magnets - The model has holes for 3/8in x 1/8in magnets which you can get from the link below…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
You can print this model easily with just one small support. I tested print it on 70% scale and it works great too. Dimensions for one link are: 24x40mm
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
This is the middle cylinder portion I made to finish out the project this is remixed from.
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
Please download from Makerworld. This STL is not the latest revision.
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
GOEWS website https://goews.ws/ GOEWS Reddit Group https://www.reddit.com/r/GOEWS/ The Greatly Over Engineered Wall System (GOEWS) is a modular storage solution combining the flexibility of the Gridfinity system with a durable, modern…
These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…
If you wish to be a distinguished gentleman, this is the bubble pipe for you! Created at my brother's request. My goal was to try and make a bubble pipe that could produce larger bubbles, instead of the standard heap of tiny bubbles that…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Update: See Pullcopter V4 on Thingiverse , currently entered into a contest there. I thought it would be fun to design a pullcopter toy with over-engineered features, that is, interesting improvements that aren't necessary for the…
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
WHY? I love my BambuLab X1 Carbon, yet it makes a hell of a noise. I do not have a basement or garage to put it in, so it needs to quiet down. Slowing down the chamber fan in the print profile has a huge effect, but I needed more. So, I…
This meticulously designed Light Switch Cover is a perfect addition to any room! Crafted with attention to detail, this model features fully functional lever that make turning the lights on and off fun! This model makes 3D printing fun…
The X1C Top Light (Over-engineered) Glass Top Led Raiser mod + anti glare shield BLLEDController compatible Fit 12mm ledstrip. Fit 15x1mm (10-20mm wide) EVA Foam tape for better isolation between 3dpart and glass top. Features: The top…
On Printables there are many variations of pliers designed to pull JST connector plugs out of their sockets. To me, they were all sub-optimal. I decided to design some JST connector pliers that addresses all the deficiencies I found. The…
Over-Engineered for Your Need I spent way too much time perfecting the art of 3D-printed keyboard switch openers that: Robust, lasts long and doesn't break easily Modular, easy to replace prong or teeth without printing the whole thing…
This is quite an over-engineered tool holder, made to be mounted on a wall, as any other tool holder. But this one is self-clamping, using not less than 12 parts. And all of them are designed to be 3D printed - even the spiral springs……
6/14/2023 - Added Version 2 This adds 0.5mm to the outside diameter and tightened the grip on the funnel. It is essential to print this version out of filament that will flex and snap into place, otherwise you run the risk of cracking the…
Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…
Please Read To create a rack you need to print: 1 left rack 1 right rack 2 cross beams All 4 pieces should be able to fit on an Ender 3 or a larger printer if the two side pieces are interlaced. The left and right sides are not…
The Slightly Over Engineered gang of garbage bag holders might be nicer but this one is mine. Two 60 mm holes. Select 0.4 or 0.6 mm version based on your nozzle. Throw it into slicer. Set one or two perimeters and 20 % infill. Print.
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
Based on the Bambu Lab Over-Engineered Y-Splitter version 2, I modified the filament entry side for a smooth filament entry and do not catch up due to the gap between the PTFE tube and the entry. In the picture, on left is the original…
Put your precious valuables in this over-engineered box. Print settings: The lid will need supports on the inside.
It can hold heavy backpacks and for no additional cost; lightweight backpacks too. I'm sure if you tried you could even use it to hold your headphones. Have fun but don't get too carried away with this one. I did with the design, but hey,…
Gemini said Sure! Here is the English version of the description, using professional terminology to highlight the engineering value of your project. High-Performance 3D Printed Concrete Mold – Engineered for Precision Take your production…
Description: This Y-Pipe Splitter allows you to easily utilize both the Bambu Labs AMS and the standard spool without PTFE tube disassembly. Background: Brandon's Over-Engineered Y-Splitter is fantastic, but the insert action on the inlet…
Remix of the best Y-splitter from Brandon Raineri . I wanted the same, but with magnets. What changed: added magnets (10 x 1.5 mm) How it's printed: Filament: PC Quality : 0.1 mm Support: yes Additional materials: Magnets 12 x 1.5 mm.…
I struggled with transporting my minis when playing Warhammer 40k so i sat down and deigned my own solution. As usual, i overengineered… Result: a stackable, modular system that should fit most Warhammer 40K minis. Simply print the box…
Bill of Materials with links at the very bottom. Some links are part of an Amazon Associate program, and I may receive compensation from qualifying purchases. Introducing the Overengineered Filament Closet. The system uses the RepRack:…
See video for more info! (ps. don't print this in plastic) If you are planning on printing one of these, i highly recommend the one with no burner. There are 2 versions of this one, one is compatible with the aluminium Bialetti Express…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. although this is an injection molded part, but apparently it is absolutely printable
BOM: M3x22 - 5pcs - gearbox M3x10 - 3pcs - gears cover M6x10 - 1pc - knob M3x5 - 4pcs - piston linkages 8mm OD aluminum tube, ~52mm length - 3pcs Grease The drive gear must be aligned well before mounting the planetary gearbox. There is…
After several iterations of stress testing, I've created a super strong ramp that can be dropped, thrown against the wall, smashed with a barbell, and supports a barbell loaded to 5+ plates per side (495lbs total). In order to support all…
Welcome to my slightly overengineered soap bubble wand called “ THE BLACK HORNET p1 ” (approx 10cm diameter) ( Please refer also to “THE BLACK HORNET p2” which is an addition to this). This soap bubble wand came to life by a request of…
These were the fittings i had laying around but they are quite a bit larger than the standard plastic collet. https://www.aliexpress.com/item/1005002680262764.html
https://www.buymeacoffee.com/maxt ---------------------- Print with 3-5 walls, 30% infill, fuzzy skin for better grip (0.8 point distance, 0.3 thickness) This Fridge Handle represents a robust and ultra-durable refrigerator handle ,…
This 3D-Model is as close as possible which I got down to with my callipers. I hate inaccurate measurements, so here was no guessing or big round up involved. Warning: Have in mind that the XL you will receive might have some changes to…
During the design I was focusing in having the most amount of movement possible using only 3D printed parts and M3 bolts and nuts to improve durability and smooth movement , however is to complex and present several problems that will be…
I designed a smaller, faster-to-print calibration cube that tests overhangs with its 45-degree overhanging edges. I've also added a version of the cube with no overhangs, if you prefer. 10mm x 10mm x 10mm Enjoy! Please leave a like if you…
First Test Video https://youtube.com/shorts/QF0Mdi2ipW0?feature=share Please be careful when cleaning the door support, it is easy to tear. Added 4-piece set of files, it will be a little stronger to assemble. Video of finished product…
Remixed from here. Rethreaded (just finger tighten and snug with wrench) Slightly thicker walls Top collar adds aesthetic and creates a depth stop to help prevent overtightening Original summary from @Dash: Low mass. Close to the…
So... At first I just wanted to make a simple monopoly with more street groups and started to think about the best way to do it. I spent a long time thinking and planning etc. but then I had the idea of making the whole monopoly modular!…
UPDATE 2024/05/31: Added an improved version of the screw and insert for a better fitment of the threads, also .3mf files --------------------------------------------------------------------------------------------------- Print…
See original model for more info.
Patch notes: Removed fillet at base (reduces warping when printing) Added printable files in 4 different sizes Updated CAD files to v2
I loved the Phone holder, but I could not fit it on my Explore Scientific 11mm 82degree lens. So I made a longer base frame version to fit it. I uploaded 2 STL : - The normal 22mm longer version - The 22mm longer version + 0.08mm wider…
This is my version of a mechanical switch for wooden track trains. Some may call it over engineered, but that's what I was asked for ;-) The tolerances of the connectors are quite loose, so it should work with most of the wooden track…
Some bike chains such as SRAM AXS (road/flattop) have different-sized rollers and therefore can't be measured with a standard “insertion distance gauge”. Based on images and logical conclusion I reverse-engineered the tool from…
I made a wide version of the heater extension (and some remixes) of the (Un)Original Prusa Drybox. It is largely to help folks add various hardware and have an easier time at wiring. It is also built to optimize for arbitrary extensions.…
Requires a LED E27 and an E27 socket. Printed in Petg, 0.20 mm, black and transprent.
This is an over-engineered but incredibly satisfying way to hold and dispense all your standard nozzles. Featuring an indexing ratchet mechanism, move the actuation arm clicks (that's the satisfying part) the wheel by 1/15th of a…
I needed to replace some shelf brackets in my kitchen so I designed these, and I wanted to make them better and stronger than the original ones. I printed these in PA6-GF (glass-fiber reinforced nylon), but any decently strong material…
The original model is almost perfect. But I have encountered that sometimes the filament binds a bit at the entrance to the channel. This has not caused me any problems so far, but to completely eliminate their possibility, I made…
Transform the Olpe Vase into a RGB desk lamp! What you need: wemos D1 mini micro usb cable (optional charger) ledring with 16 ws2812 (68mm outer diameter, 54 mm inner diameter)…
Remix of the overengineered plate rack This is half the size, designed to be an add-on at the end/beginning of the original. The original is more sturdy than two of these together so don't use it as a substitute. keeping the description…
This is by far the best phone mount that I have seen, but I always cringed a bit when tightening it on my eyepiece. I have a roll of TPU i was trying to figure out what to do with and thought about this mount and maybe I could make it a…
Since I had played with a gimbal mount lately I though some kind of handle would be nice, and that reminded me of control sticks on a game controller or remote control, and of fidget joysticks - so I added a spring and this is the result.…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
Making a 3D printed rocket is not hard. Making a LARGE (80mm by 1000mm or more) mid and high power rocket without throwing kilograms of filament at it. that's not so easy. making is ultra light and insanely easy to print Oh and requires…
V2 Published - https://www.printables.com/model/964355-overengineered-frisbee-v2 I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough, so I've adjusted them, so that the frisbee…
The game piece set used in these images were created by ParasitKegel and I highly recommend it. This simple yet overengineered chess board doubles as a very rugged carrying case. The handle and two pieces connect using two dovetail…
The cup model includes a false bottom where weight can be added mid-print to help with stabilization when removing scrap vinyl using the weeding tool. Print Instructions: Pause the print just before the first top layer of the inner…
I modified the design from @weberyap_251021 to be able to install an 8mm COB ledstrip
screw on clamps with arms angled for better wrists for drawing, also works with keyboards. blend file easily adjustable (copied from original post) Print Instructions: Everything can be printed in place without supports with at least 10%…
hold a spool frictionless using 10x4x3 bearings, using m3 screws to mount them
An intentionally beefy RSA token and badge holder, with a lanyard slot at the top. Assembles with 6x M3 screws and 6x M3 H3 heat set inserts.
Over-engineered Apple Airtag keyfob/ring. Designed for use with a 30 mm keyring (others will still fit) I left one side open (the white side of the Airtag) so the pinging sound gets less muffled. Parts needed: 5 x M2x6 Socket head bolts…
I designed this for my son after seeing a ton of these on Amazon out of wood that looked shady and poorly made. My son loves playing with in when practicing sitting. I designed it so we could learn about shapes and stuff. Also make…
Simple and easy Trash Bag Holder, tape it on a wall etc. Easy to resize
This is the ultimate vise for every tinkerer, crafter and handyperson working at a table. If you're soldering PCBs, repairing watches, embossing leather, modelbuilding or just repairing and trying things you always need another tool to…
I got tired of the constantly scuffed fingers or dropped inbus wrench, so I designed my own slightly overengeneered model of the inbus wrench handle (allankey). The primary goal was to make the handle grip well and also offer reasonable…
Full credit for the design, hook geometry, and construction goes to the original creator—this remix merely adjusts the orientation of the mounting hole. Print settings: PETG, 15% infill, "Gyroid" infill pattern, 3 wall lines. No support…
I needed a model for designing my workspace with my new Prusa XL with Enclosure, but I couldn't find any model ready to use. I found a great model of Prusa XL by @Kapplion_80283 and added a model of Original Enclosure. If you need other…
Removed the lanyard hole using Anachronist's SCAD file. Easy to do, just saving others a few clicks potentially
I suggest you use this Simple Glue Jig instead! In testing, I realized I massively over-engineered this jig, and it could be done in a single part that's faster and easier to use. But I spent too much time on this version, and maybe…
These badass filament swatches are able to pull double-duty as a badge to mark your spools! I use Collections on iOS to track my filament spools, so I needed a way to quickly bring up details on a given spool, even if it's in my AMS or a…
DiveStar: Articulated Reverse-Buoyancy Pool & Dive Toy DiveStar is a 100% print-in-place, 8-legged water toy engineered specifically for the pool or bathtub. Unlike traditional articulated prints that float flat on the surface, DiveStar…
The best-flying pullcopter is back! Here's an update to my pullcopter toy with over-engineered features, that is, interesting improvements that aren't necessary for the function of the device, but may improve performance. The original…
Design Goals Car windows aren't flat so the tools we use on them shouldn't be either. It's cold out there, think about people wearing big poofy gloves/mits. Multiple part assemblies like replaceable edges lead to extra failure points,…
Best to print as seen in the image. this phone case includes a stand that is print in place and can has a snap fit to attach to the back of a phone. the phone case also includes some buttons that you have to slide between the grove and…
🎯 Ultimate 3D-Printed Kendama – Engineered for Strength & Style! Tired of kendamas that snap on first impact? This design solves the failure point – weak layer adhesion – with an innovative split-body construction that prints flat for…
Description I present to you: The MOST overengineered battle top and launcher combo. But it's not overengineered just for the sake of being complicated . This system is strategically engineered for the sake of durability, maximum spin…
The Totally Not Over-Engineered Wall Hook Why use a passive wall hook when you can have a mechanism? No floppy middle state here. A true magnetic bistable latch drives the hook open or closed with a deeply satisfying snap . Smooth,…
WE ARE DRUNKER KILLER
I like to make modifications and wanted to put my whole 3d printer into SolidWorks since I have it. Problem is, the files come from Prusa Research as stl but I need concentricity and to snap to surfaces. I took it upon myself to use the…
Hier ein kleines Bastelprojekt meinerseits an dem ich seit einiger Zeit immer mal wieder Konstruiere . Das Modell Benötigt folgende Materialien : 6x Einschmelzgewinde M3 (4,5mm Durchmesser ) 2x Kugellager 608zz 1x M3 8 oder M3 10 Schraube…
The basic design by 3dGringo looked good and several people requested design files, so I quickly did a reverse engineer of the part so that others can make spinoffs. Some cool ideas included adding charging USB ports and additional plugs.…
![LL Chain Wear Tool [reverse engineered]](https://media.printables.com/media/prints/937017/images/7163348_8c3a6908-ef8e-42b2-b248-4fe5ad3cd486_ba6234a4-d2d0-40e4-ab9f-0d56809b1086/chain_tool-v4.png)
