4,869 models
Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
This lucky horseshoe only has details on one side, which makes it easy to 3D print. The original model was designed in Blender 2.9 to create a simple open-mold casting. I also made a thin configuration for those who want something more…
IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
Horseshoe with Horse Head – wall decoration A decorative horseshoe featuring a realistically detailed horse head, inspired by classic equestrian motifs and rustic design. This model works perfectly as a wall decoration for stables,…
Monkey Skull Chalice. HOW TO VID.
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Meshes for bonsai pots or flower pots, round Ø 41,5 mm and square 41,5 x 41,5 mm
A simple tablet and/or sheet music holder I designed for my Alesis Nitro Mesh E-Drum rack. Since it is a customizable OpenSCAD design it's possible to create variants fitting other racks, as long as the is a horizontal pipe at the right…
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
This is a remix of my own Travel Battleship game. After having printed two sets of games, I saw that there are a lot of parts (2 x 64 markers). Then I realised that it is not necessary to track your opponent's shots, with exception when…
I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…
This model is made from a photogrammetric scan of the Hindu god Ganesh The original scan (made by @geoffreymarchal) has been repaired and cleaned. The .gcode file is generated for a nozzle size of 0.6 mm and includes a filament change for…
I created a Stealth Battleship Catamaran Wolvie Class - SBCWC for everone, who like models of Battleships :-) I wanted modeled my own (fictional) Stealth Battleship Catamaran in my Wolvie Class, in short SBCWC. I took and remodeled 5…
Uma--Maheshvara (Ball-Gazing) The Iconography of Play: Decoding the “Circle Mudra” in Divine Lila The vast sculptural tradition of Hinduism is governed by mudra , the precise language of hand gestures that conveys divine attributes and…
For best results, use a sparser (15%) infill for the base and a denser (50%) infill for the drying rack sticks. The included 3MF and gcode files do for you. Inspired by Test Kit Station - API Master Test Kit by SamSkellSkell , but I don't…
A quick (approximate) OpenSCAD replica of the original Alesis Nitro Mesh E-Drum rack feet design. Easily customizable for any height and drum rack pipe diameter (not only for the Nitro kit). The original rack pipes have a diameter of…
This sign honors friendship. It was printed flat and does not need any support material. PETG was used with a 10% infill. The .3mf and .gcode files contain a color change for the words.
This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…
FISH CARP FRESHWATER COMMON KAPR RYBA
Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle
Put the lid on to shake out all the nut crumbs from the bottom of the container. STL included but make sure to print no bottom and top layers on the first 3mm of the print.
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.
Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
The Nihil Strikeship appeared in the Star Wars main comic run (2020-) #29. Dimensions Length Width Height 86mm 63mm 17mm The model comes with an articulated stand. Alternatively, it is also compatible with a big pin and base . Print…
Mount that Meshtastic repeater on a tree with this enclosure. The insert goes into the housing from below leaving all entries weather proofed inside the protruding shroud of the outer housing. Print with PETG and spray inside of the…
Vacuum Seal Your Wine I learned about the Vacu Vin® wine saver while working at a winery. We would pump the air out of our unfinished wine bottles every night in the tasting room so the wine wouldn't oxidize. In the presence of oxygen,…
Lešij (Leshy) - Slavic forest demon, guardian of the forest 2 (two colours) Leshy - Wikipedia
As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…
Lešij (Leshy) - Slavic forest demon, guardian of the forest 3 (two colours) 24 cm Leshy - Wikipedia
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
I hope riding this tensegrity brings you good luck, pal! Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. The pieces fit together tightly, but depending on printing tolerances you may need…
You can resize this model in FreeCAD or PrusaSlicer. Put a piece of insect mesh between two frames and glue them together. The tiny holes are suitable for nails.
This is a remix of a photo frame for the Waveshare 5.65" 7 Color E-Ink display. I loved the model, but wanted cutouts for my Raspberry pi0 which controls the display and allows me to have a digital display that uses very low power and the…
Cover for mesh clip trunk OE: 7141855
I created this as a replacement for the standard filter intake cage. We had some baby fish we wanted to make sure didn't get sucked into the filter input. The openings on the standard intake cage were too large. This design replaces the…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 16mmx16mmx0.16mm squares in a 4x4 grid with 1.6x160x0.16 lines connecting each grid element to provide…
battle spaceship space rocket galactic bitevni vesmirna lod vesmir raketa
BATTLE SPACESHIP SPACE ROCKET GALACTIC BITEVNI VESMIRNA LOD VESMIR RAKETA
pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Feets for 3030 Mesh Cuboid enclosure from RatRig I have bought this Mesh 3030 Enclosure Cuboid from RatRig : https://www.ratrig.com/modularenclosuresystem/enclosure-standard.html But it comes without feet… 3030 extruded aluminium can easy…
Two separate covers for the origin Prusa MK3+ LCD and the Waveshare 5" LCD. Both covers can by stacked for easy storage. It can be printed easily and without support.
This has been bugging me for a while and I didn't want to mail order for caps that might not fit. A few minutes worth of modeling and now it's fixed. If it doesn't fit your screw holes then edit the Fusion 360 model and print another remix.
Velice mne zaujal suchý box vyrobený z Tesco klipfresh foodsaver 5 L - https://www.printables.com/model/682467-filament-drybox-tesco-klipfresh ,do něj se vejdou dva kontejnery na silica gel -…
Boya flotador para tanque de agua de un deshumidificador marca Ufesa. Lo he realizado: En PETG con 2 perímetros y un 10% de relleno.
Designed for the new plastic test tubes that come in the API Freshwater Master Test Kit. Flat-bottomed and sits right next to your sink with a slope that drains water from the tubes. No more tossing these into your drying rack only for…
While the original model by @ChinookEDC fits the Waveshare ESP32-C5 development board with an internal antenna and the remix by @MarkusJotter_2980653 neatly integrates the SMA adapter for the board with an external wifi antenna, you…
It is made in Fusion 360. I made it myself for a fence, because buying such elements is expensive. The diameter of the fence wire is 2mm. I printed this element with an Anycubis Cobra 2 pro with PETG filament.
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
I wanted the nice mesh-style look for the skirts of my Voron 🥰 but without reprinting the complete skirts and especially without “meshing” with the slicer 😉. So I designed these plug-in mesh inserts which besides the awesome look also…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
NEW Added 200mm clip arm for larger bags. Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion Updated: 04/07/2024 - added an extended version of the…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
Not sure how I wanted the skirts for my 🥰 BoxTurtle , whether to go the true mesh way or rather opt for a mesh-like look only but have them printed solid 🤔, I played around in CAD to have the mesh as a separate part and also to do some…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
Repaired mesh iteratively in meshlab so prusa slicer could print it. Will update with photo of print once it is done. Category: Scans & Replicas Note : should print fine in Prusa Slicer after error correction. May not print in certain…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Fun fidget toy: Mesh or fabric material, like chain mail. If you enjoyed this, check this out! https://www.printables.com/model/1784764-silent-gear-cube
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
UPDATE: The main spacers were missing from the file list and have now been added. The hole in the hand crank has been adjusted to fit the input shaft. This is my rendition of a “constant mesh” 4 speed manual transmission gearbox. A…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Mesh Bowl Elevate your space with this sleek, 3D-printable Mesh Bowl — a modern, minimalist container ideal for decor, storage, or gifting. Featuring a dynamic mesh pattern and clean geometric curves, this design strikes the perfect…
Welcome to my first attempt at a printable kit of the Battleship Fuso in 1:625 and 1:700 scale. This model is based on the Fuso model in the game World of Warships, completely remodeled from the ground up, with many tweaks and adjustments…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
Now takes less time and Modified to print with less amount of filament. Design works with Ender 3 Mod Pro By SathyaResearch 3D Printers. Originally designed by Volf. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Build your own IoT NeoPixel lamp inspired by EPCOT Spaceship Earth! Use a QT Py ESP32 PICO, NeoPixel BFF Driver and WLED to make amazing lighting effects! Designed by Noe Ruiz for Adafruit Industries Learn Guide…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Honeycomb/Hex mesh pattern made by me in TinkerCad. This pattern can easily be copied to add more together for a larger size if needed. Supports = No Brim = No Filament = I used PLA but anything would work
Dimensions Standart Dimension: 95 mm x 101 mm (D x H) Scalable to whatever size you need.
Summary This modular ramp allows robotic vacuum cleaners to easily overcome door thresholds and small height differences. The individual segments can be flexibly combined to achieve different widths. Key facts For overcoming door…
Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
I needed a mesh insert for my bonsai dish and I didn't want to buy a large pack of them online. This model can be printed, then trimmed to size if necessary. The holes are 3 mm wide, and should be suitable for gritty soil. I designed this…
The source marked this model as adult content.
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
I have had this idea for a ‘fried egg’ fidget fabric/drink coaster for a little while. I loved the idea of using mesh fabric in the fried egg to give it flexibility and make it feel more ‘egg-like’. The egg shell with the magnets is a fun…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
Now takes less time and Modified to print with less amount of filament. Design works with Ender 3 Mod Pro By SathyaResearch 3D Printers. Originally designed by Volf. https://www.thingiverse.com/Volf https://www.thingiverse.com/thing:52216…
This is a pocket-sized, travel game of battleship that fits inside an Altoids tin (ok… technically two Altoids tins). This mini version includes all the pieces you'll need to play including: Both Play grids Hit/Miss Pegs (I would suggest…
I hope you enjoy playing this version of the classic naval battle game as much as I did, both as a child myself, and later as a father with my own kids. It is one of the few board games you can easily play over Zoom, etc. This is a major…
I haven't tested this yet because of printer problems but it 186.5mm long 121mm wide 1mm tall and the whole are 2x2mm. Please if anyone prints this tell me how it turned out cause I'm really curious.
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
The Lattice Lamp Shade features an intricate, organic pattern that casts beautiful shadows and adds warmth to any interior. Designed for E27 fittings, it pairs effortlessly with modern or minimalist spaces — turning light into…
Mesh for my Spidy shells Enjoy Category: 3D Printing
