Search results: eten

Sort order

605 models

P
PrintablesTeraflop

Teyleten Robot ESP32-S3-WROOM-1 Case

This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…

Downloads
2,651
Likes
168
Rating
4.9
P
PrintablesY Ibrahim

Print-in-place Rotary Fidget Detent Knob with detent strength options

This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…

Downloads
948
Likes
67
Rating
4.67
P
Printableschubbs8697

Ford F-150 Gearshift Detent for 2009-2014 F-150s with Floor Shifter / Console Shifter

This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…

Downloads
457
Likes
16
Rating
5

SUP Adapter for Etenwolf Air 3 Air Pump

Sup adapter for Etenwolf Air 3 Pump. (Amazon) https://a.co/d/jj8SY0z Used for Paddleboard inflation (Amazon) https://a.co/d/jj8SY0z Infil 100% Filament: PLA/PETG/ABS/Nylon STL & GCODE (Coreone)

Downloads
96
Likes
8
Rating
0
P
Printablesmysak08

Základna pro pletený košíček

PLA, 2 perimetry, 15% výplň

Downloads
37
Likes
9
Rating
0
P
PrintablesChrisDoe_85

Nylon rivet puller - Nylonnietenzieher

This rivet puller is designed for removing the nylon rivets when converting the Core One+ to the INDX system. You can place it directly on the rivet and slide it underneath the nylon rivets. Dieser Nieterziehen ist für das Entfernen der…

Downloads
21
Likes
2
Rating
5
P
Printablesh2odragon

Pretend to Work sign

100x160mm sign, reading "Fight for the right to pretend to work" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If…

Downloads
13
Likes
3
Rating
0
P
Printablesschiko

Retention Clip for Pastamatic Spool Winder (Driven Spindle)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…

Downloads
3,505
Likes
291
Rating
4.98
P
PrintablesGekoPrime
Downloads
2,941
Likes
251
Rating
4.97
P
PrintablesDonJon

Safety eyes with retention ring

This safety eyes need to be printed with low layer height (0.1mm) to achieve a nice result. The eyes are made from two different parts for ease of printing (the rod and the head) that need to be glued together, and also it make it easy to…

Downloads
2,389
Likes
274
Rating
4.82
P
PrintablesSteamroller17

Better Hex Bit Case | Parametric | Magnetic Closure | Spring-Tab Retention | Print-in-Place

A parametric case for standard 1/4″ hex bits , designed for practicality and flexibility. The main case is print-in-place and uses 4 mm DIA × 1.5 mm or 3 mm thick magnets to keep it securely closed. The spring tabs in each row hold the…

Downloads
1,100
Likes
536
Rating
5
P
Printablesfigterk

LTT Screwdriver Bit Holder Magnetic Retention (Multiple Sizes)

This is a remix if the inner portion of my original model. This one is intended to be printed with rigid filament (PLA, PETG, ABS, etc.). It has the corresponding number of holes on the bottom to insert 6x3mm magnets for bit retention.…

Downloads
1,015
Likes
132
Rating
5
P
Printablesmak77

MAK Thrustmaster HOTAS Warthog Afterburner Detent

Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…

Downloads
889
Likes
20
Rating
5

Super Safety Switch - Selector detent pin

In case you don't want to file a detent pin round for your super safety switch, here is a working solution. I printed it on a resin printer with 0.05mm resolution. Feel free to share…

Downloads
886
Likes
27
Rating
0
P
PrintablesMordiev

MMU2s Tension Screw Retention Washer

Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…

Downloads
854
Likes
78
Rating
4.78
P
Printablescdeox

AM4 - Original Retention Brackets (Cooler Mounts) - Extended

Hook part extended by 5mm on both mounts. Category: Computer

Downloads
768
Likes
18
Rating
5
P
Printablesilike2design

AMD CPU Heatsink retention bracket, socket AM2 AM2+ AM3 AM3+ FM1 FM2

This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…

Downloads
727
Likes
25
Rating
4
P
PrintablesElGato

Carabiner Pretensioned

As suggested by several makers of Filarte3D's model, the closing force of the arm can be increased by moving the arm outside of the model - essentially bending the arm outward. This is exactly what I did - resulting in this model. After…

Downloads
671
Likes
76
Rating
4.8
P
PrintablesEWJ

AM4 Backplate & Retention Bracket

Uses 4 M3x15mm bolts 4 M3 nuts 4 M3 washers (optional) The backplate has a second version which doesn't require supports and will bridge the overhang instead Consider rotating the retention mount for better strength. That will instead…

Downloads
645
Likes
32
Rating
4.75
P
PrintablesVERBtheNOUN

Safety eyes with retention ring (head 8mm and rod as one piece)

Remix is the head (8mm) and rod piece together as one piece. No glue required.

Downloads
574
Likes
51
Rating
5
P
PrintablesPichon

Skeleten 10in Rack

This is the SKELETEN, a strong, modular, easy-to-assemble 10-inch rack. It is called the Skeleten because it features bone-shaped side supports and it is, well, a ten-inch rack. I wanted a strong, simple, modular 10-inch rack for my…

Downloads
555
Likes
146
Rating
5
P
PrintablesHud

XT30 Retention Block For Control/Expansion Hub

Printed with no supports, .2 layer height, 4 top and bottom layers, 3 side layers, 40% infill.

Downloads
531
Likes
17
Rating
0
P
Printableseof

Pretensioned clip / Klammer mit Vorspannung

I needed a clamp that exerts force even when there's little material between the jaws, or that has more force than other clamps. So I designed a clamp with separate jaws that gains preload through the thick jaws. Additionally, it looks…

Downloads
519
Likes
156
Rating
5
P
PrintablesMZ4250

Dread Pirate Captain and Totally Not a Flock of Parrots Pretending to be a Pirate

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Downloads
488
Likes
130
Rating
4.75
P
PrintablesMark McIntyre

Stylish, Minimalist Sugar / Sweetener Packet Holder

After keeping sweetener packets in a small bowl for years, I decided it was about time to make something a bit more stylish. This minimalist holder will accommodate pretty much any sweetener packet: Sugar, Splenda, as well as unsweetened…

Downloads
481
Likes
60
Rating
4.88
P
PrintablesPreppo

Original Prusa Enclosure (OPE) - Door Seal Heat Retention

Key Features of the Door Seal Add Heat Retention: Our door seal brings the heat, literally. It's all about insulation, creating a stable printing zone that spells primo print quality. Reduce Drafts: Reduce unwanted temperature shifts, the…

Downloads
436
Likes
159
Rating
4.94
P
PrintablesAustin Lively

Kydex Style Mag Retention Inserts

Quick printed version of the kydex AR mag inserts you'll find in nicer pouches. If printed in PLA they will creep over time, but I've found the retention to still be pretty reliable over time. Obviously higher temp resistance materials…

Downloads
397
Likes
29
Rating
5
P
PrintablesPhil Hodgins

Retention Clip Short Side

Print instructions: 0.2mm layer height 4 walls for strength 100% sparse infill Turn off single layer for Top Surfaces

Downloads
368
Likes
27
Rating
5
P
Printablesmotocoder

PC4-M10 Retention Clip

Many printers, especially those with a Bowden extruder, use PC4-M10 fittings to retain the PTFE tube at the extruder. Reportedly on Bowden printers it helps with retraction if the fittings at both ends have a firm grip on the PTFE tube so…

Downloads
358
Likes
59
Rating
5
P
Printablesatucom

Gridfinity USB Retention Holder

Gridfinity holder for socket/female side of USB A devices. I use mine to hold USB A to USB C adapters. If desired, there is also a looser fit model. The base model is a friction fit that acts a pseudo handle. Printed with PLA+ (regular…

Downloads
322
Likes
74
Rating
3.75
P
PrintablesBrian Segarra

tippmann ball detent

Tippmann ball dente seams to be working fine after 50 shots i used saint smart tpu , so print with a medium hardness tpu

Downloads
318
Likes
11
Rating
0
P
PrintablesRiskable

Parametric Thrust Bearing Retention Ring (works with Airsoft pellets)

This .scad will generate a ball bearing retention ring of any size you want with any number of balls! I created it to work with Airsoft pellets (BBs) but it will work with any ball or sphere shaped object. The idea is to use this in a…

Downloads
308
Likes
62
Rating
5
P
PrintablesPhilip Brady

Pastamatic Retention Clip Set

This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…

Downloads
300
Likes
30
Rating
5
P
PrintablesKistek

Pastamatic Spindle Retention by Kistek

Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…

Downloads
297
Likes
43
Rating
4.5
P
Printablesipullstuffapart

Nintendo Switch OLED Compatible Dock Wall Mount, with Retention and Slotted Holes

Are you ready to experience the next level of gaming convenience? Introducing the phenomenal Wall Mount Bracket Remix for the Nintendo Switch! Brace yourself for a description that will make your heart race, your palms sweat, and your…

Downloads
284
Likes
34
Rating
5
P
PrintablesFipsthedog

IKEA Couch Feet Raise for FRIHETEN Corner sofa-bed

This is designed to raise our couch to accomodate our Dreame vacuum robot. Scale (only) the height in your slicer to adapt the heigth of the raiser. Includes a raise for the roller aswell. The raisers can also be stacked, should your…

Downloads
281
Likes
42
Rating
5
P
PrintablesTobi aus LE

Betender Engel Nr. 1

Ein kleiner betender Engel zur Dekoration, gescannt mit dem Einstar Vega. Größe: 59mm x 86mm x 97mm

Downloads
280
Likes
16
Rating
5
P
PrintablesTraceParts

Detent plastic hinges

Detent plastic hinges More part numbers and CAD formats on www.traceparts.com/goto?Product=90-18062018-053028

Downloads
279
Likes
16
Rating
0
P
PrintablesBoris Builds

Flag Pole (1") Heavy Duty Holder / Mount With Retention Screw

A simple Flag pole holder. Anchor/bolt spacing based off standard brick joints and using 3/16" bolts. Sized for a 1" flag pole. Infill: 20-30% Infill Modifiers: 99-100% as shown in photo Support: Yes, Tree Walls: 4-6 Top/Bottom Surfaces:…

Downloads
274
Likes
38
Rating
5
P
PrintablesBudvarBoy

Cable Retention Bushing / Gland

Cable Retention Bushing / Gland for USB cables, for example from arcade sets from Aliexpress. Lock tab is 8 x 8.5 x 1.6 mm. Cable is 4 mm. For holes 18 mm or 22 mm. I printed a layer of 0.16 mm.

Downloads
272
Likes
152
Rating
0
P
PrintablesXDleader555

Bushing Retention Clip for Volkswagen MKIV First Gear Getter

Retaining clip for DieselGeek's amazing first gear getter bushing. Under heavy use, the bushing may fall out due to its friction fit. This 3D printed plastic clip slides over the bushing and holds everything securely in place. You can…

Downloads
271
Likes
38
Rating
0
P
PrintablesbobMtran

Lynx, Minx, Lonx 2.1 Ball Detent

This is a modified shroud and pump for the Orion Blaster Lynx, Minx, and Lonx 2.1 beta to add a ball detent. This locks the priming grip in the foward position so it doesn't move around easily. Uses a 6x7mm ball detent, the same kind that…

Downloads
261
Likes
44
Rating
5
P
PrintablesTobi aus LE

Betender Engel Nr. 2

Ein kleiner betender Engel zur Dekoration, gescannt mit dem Einstar Vega. Größe: 69mm x 54mm x 139mm

Downloads
256
Likes
13
Rating
5
P
Printableskanew
Downloads
255
Likes
48
Rating
0

Impulse Ungineering Ontos O-ring Retention Breech

The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…

Downloads
252
Likes
29
Rating
5
P
PrintablesAn2

Remix from Bicycle Bottle Cage / Holder by PretEnGineering

This is a remix from the Bicycle Bottle Cage / Holder by PretEnGineering. I made a round shape on the backside for fitting a tube of a bicycle frame and added some tunnels vor mounting it with cable ties as an alternative to screws. Print…

Downloads
250
Likes
30
Rating
4.75
P
PrintablesOpalTheOpossum

38/357 speed loader J frame - Rotate Detent - V2.0

Very simple 38 / 357 speed loader that actually keeps the bullets aligned, actually has a detent, and actually fits without getting jammed at an angle. - Uses a single M4 screw between 10 & 30mm long. - 20-30g of filament depending on…

Downloads
245
Likes
36
Rating
5
P
PrintablesLLL

SD Card Rugged Box with retention clips , M3 or print in place (SD case)

This is a box for up to 3 sd cards, that is made to be durable, with spring loaded retention brackets to make sure the SD cards don't fall out. There are two versions, either a print in place one, or one using a 12mm M3 bolt and nut. The…

Downloads
238
Likes
72
Rating
4.5
P
PrintablesBorninpla

Ender 3 V3 SE - Retenedor bobina de filamento - Filament spool stopper

This simple spool stopper is designed specifically for the Ender 3 V3 SE and solves that annoying wobble during prints. Function: stabilizes the spool to prevent front-to-back movement. Installation: fits directly onto the stock holder,…

Downloads
231
Likes
29
Rating
5
P
PrintablesDon Chooluvit

X56 Center Detent

I made the detent more pronounced, and reduced the pressure on the nubbin so that it doesn't rub on the part until it comes in contact with the detent. Snaps snuggly into the throttle slide, with no need for additional supports on the…

Downloads
231
Likes
15
Rating
5
P
Printablesmosselini1

End cap & retention ring for "Parametric Cable Grommet" (parametric)

While using the original model, the parts always fell apart when my cables would move slightly, so I designed this little press-fitted cap to fix this problem. The whole inner assembly could still leave the outer ring at that point, so a…

Downloads
207
Likes
16
Rating
0
P
PrintablesBuildX

#0023 Makita Driver Bit Holster with Strong Bit Retention

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've tried a few of the bit holsters out there but none seem to have worked for…

Downloads
204
Likes
41
Rating
5
P
PrintablesTakkaya

Playmobil tabletennis

My daughter wished for a table tennis table for her Playmobil set. It was important to her that the legs can be removed, but I recommend using a drop of glue. Not a very elaborate design, but it serves its purpose.

Downloads
202
Likes
30
Rating
5
P
Printablesaxellarcos

AvE Olfa 25mm Knife Retention Spring and Pin Upgrade

Replaces the spring and blade retention pin with a self retaining spring and a larger base pin, also adds one more locking lobe so the spring doesn't get squished. Print Settings: Layer Height: 0.2mm Infill: 30% Material: PETG Supports on…

Downloads
199
Likes
25
Rating
5
P
PrintablesRK23

Voxelab Aquila -Ultimate Bed Leveling Knob- Detent Set (Remix)

this is a remix of thing:4915344 , the wheel does work OK as in the original design , but the detent part doesn't fit on the Voxelab Aquila's Y-carriage plate on it's power-side (back left), though there's another remix that already fix…

Downloads
195
Likes
22
Rating
0
P
Printablestheworkshope

Anderson Powerpole Retention Clip

Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal…

Downloads
195
Likes
14
Rating
5
P
PrintablesJoon Chor

Pastamatic - retention clips - easy open finger tabs - normal and drive side clips

The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle

Downloads
193
Likes
20
Rating
5
P
PrintablesGreg171

Pmag pouch with detents

Remix adds detents for the 10 round Pmag. Belt clip was shortened to work with a 1.5" belt. Print in the default orientation, use organic or tree supports. Highly recommend 3 to 5 walls depending on your nozzle size.

Downloads
193
Likes
44
Rating
5
P
PrintablesGhostguy6

Baofeng UV5R Gopro holder With Improved Belt Clip Retention

An upgraded go-pro compatible holder for the UV5R radios. There is an added slot for better belt clip retention to help prevent movement under off-roading conditions. It also significantly helps reduce noise from the radio rattling around…

Downloads
190
Likes
27
Rating
5
P
PrintablesJeff

Ka-Bar Retention Sheath (full size)

This is a retention sheath for a full sized Kabar (1211 in my case). The sheath has two lugs that bend downward when inserting the knife into the sheath and spring up behind the cross guard, retaining the knife in the sheath. To remove…

Downloads
186
Likes
12
Rating
5
P
Printablestheplayingdead

IKEA Friheten Sofa Cup Holder

I needed a place to put my cup near the sofa and didn't feel like getting a table. You can simply attach this cup holder to the arm of the Friheten sofa. Max cup diameter is 87 mm but you can edit the .ipt or .step file. There are both…

Downloads
182
Likes
30
Rating
5
P
PrintablesSnakeFist

Thrustmaster HOTAS Warthog - Airbus Detent

There is also a model with deeper grooves available, although it may require some breaking in / sanding in order to function smoothly. PRINT SETTINGS Printer: Flashforge Adventurer 5M Layer Height: 0.2mm Wall Loops: 3 Filament: PLA…

Downloads
182
Likes
8
Rating
0
P
PrintablesGamefox

Nintendo Switch OLED car mount with retention clips

Redesigned from scratch for the OLED variant's dimensions and features such as speaker ports and vents. Added retention clips to hold the device in the mount for added safety. Retained the original aesthetic although slightly modified,…

Downloads
181
Likes
22
Rating
0

Lamp Shade Retention Nut Replacement

This is a replacement nut used to clamp the shade in place on my lamp's light socket. The factory's original part broke due to heat fatigue. I printed this model on my Prusa MK3S+ using polymaker's "Galaxy Black" 1.75mm PolyLite™ PLA…

Downloads
179
Likes
15
Rating
5
P
PrintablesDaTTcz

Stav na pletení náramků z gumiček-4 trny (Rubber Band Loom-4 pins)

Stav na pletení náramků z gumiček-4 trny UPDATE: Přidána verze s rukojetí Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji

Downloads
178
Likes
18
Rating
5
P
PrintablesFokieH

Sterne & Planeten / Stars & Planets

Hier findet Ihr einfache Modelle von verschiedenen Sternen und Planeten. Ich habe diese erstellt um sie mit Glow in the Dark Material zu drucken und den Kindern einen leuchtenden “Weltall - Himmel” im Zimmer zu machen. Gedruckt wird in…

Downloads
175
Likes
22
Rating
5
P
PrintablesJon

Chisel Guard with Built in Spring Retention

Tired of cutting yourself on your chisel when you dig for something in your toolbag? Or sick of finding out that the chisel you just sharpened has been dinged by another tool in the drawer? Fear no more, these guards are easy to print,…

Downloads
169
Likes
34
Rating
5

Tether Block (retention block) for Nikon Z6 Mark II

This is a remix, adjusted and optimized for TetherPRO cable and Nikon Z6 Mark II

Downloads
168
Likes
16
Rating
0
P
PrintablesRetro Frog

Terraonion MODE Hard drive retention bracket for Saturn and Dreamcast

This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…

Downloads
164
Likes
10
Rating
0
P
PrintablesCharlie

Shaft/Axle with R-Clamp Retention Holes – Remix

The original shaft had a tendency to slide off the side supports during use, so I extended it by 2–3 mm and added holes sized for an R-clamp to keep it securely in place. Printed successfully in both PLA and PETG without issues. For…

Downloads
160
Likes
22
Rating
5
P
PrintablesJeremy Cook

Detent With Spring and Bearing

Detent and other parts used in the box drum video below: Provided in STEP and Fusion 360 archives. For reference.

Downloads
159
Likes
6
Rating
0

Firefighter Pretend Play Set

Update 4/29/2025- STL formats added. I realized I left out the Antenna and Keypad from the first upload so that was updated as well. A firefighter Helmet, Axe, Walkie-Talkie and Extinguisher for pretend play/dress-up. Supports needed on…

Downloads
159
Likes
33
Rating
0
P
PrintablesTodd Ferrante

Black Diamond headlamp detent repair

My Black Diamond headlamp had a bracket with two fingers that let the tilt adjustment click into place. The fingers broke off and the light would flop down. I used scotch tape to hold the angle for a couple years. Then I printed a TPU…

Downloads
156
Likes
10
Rating
5
P
PrintablesJohn5

VKB STECS Detent Frame v1.0

NOTE: This model is not optimized for 3D printing. This is intended only as a reference, thus only .step files are provided. .f3d file available upon request.

Downloads
151
Likes
20
Rating
0

Cutting Board/Cheese Board for Pretend Play Kitchens

This is to go with the Various Cheese prints intended for PRETEND PLAY ONLY, not for actual kitchen use or to serve food on. Enjoy this with our many pretend play foods and kitchen toys to help kids learn about the world around them.…

Downloads
146
Likes
14
Rating
5
P
PrintablesDrizzthacker

Retention Clip for Pastamatic with IXO

Print 100% infill. I've used PETG because it need to be flexible. Mount between the adapter and the spool winder as you can see in the image

Downloads
146
Likes
10
Rating
5
P
Printableseric-ao

Nozzle Wrench, chamfered grip and socket retention by M3 screw

I found the original version very good and useful, however I usually squash the first layer so the part came out rather sharp on the edges, this remixed version have a chamfer for softer grip. Also, I didn't want to glue the socket…

Downloads
139
Likes
24
Rating
5
P
PrintablesPixel of Life

VKB STECS Airbus Detents

I found it impossible to set up good Airbus style CLB + FLX/MCT + TOGA detents with the stock STECS detent pieces so I designed this custom piece that adds three identical and equally spaced detents. Print with 0.2mm layer height and 100%…

Downloads
135
Likes
23
Rating
5
P
Printablesforsaken_candy

Anti-droop detented arms for Modular Mounting System

These are anti-droop arms for the Modular Mounting System. For full documentation, knobs, and other parts, please refer to the original model . The joints in the original design are held purely through friction, which means they droop…

Downloads
135
Likes
36
Rating
5
P
PrintablesJesse Reesor

Drawer Slide Rear Detent

These were specifically design to replace the drawer slide detents on a Kennedy toolbox. The original pieces become brittle over time and will fail. They will likely be a little tight at first and get better with use. Print Settings:…

Downloads
133
Likes
14
Rating
5
P
Printablesjurassic73

Sturdy Pegboard Retention Clip (remix)

Remixed the strongest pegboard clip I've seen to make it a bit more sturdy and added removal openings

Downloads
130
Likes
38
Rating
5
P
PrintablesCrackFox

Concept 2 phone or device holder with bigger retention bumps

Concept 2 rower phone or device rest/mount remix of model from Leoquart

Downloads
128
Likes
9
Rating
0
P
Printablesshr00mie

BMW E46 Floor Mat Retention Clip

Got tired of the Velcro pads failing constantly, forcing me to adjust the floor mats every damn time I got in the car. This is my solution. Printing: Small part, so go 100% infill @ .2 or smaller Button face down Organic supports on…

Downloads
127
Likes
16
Rating
5
P
PrintablesEmbrace Making

Folding Detent Head Strap Integrated - PRUSA Covid-19 / Coronavirus Face Shield

Instructions: NOTE* IF PRUSA DOWNLOAD ISN'T WORKING, GO HERE: https://www.thingiverse.com/thing:4246175 https://grabcad.com/library/prusa-covid-19-coronavirus-face-shield-with-integrated-folding-detent-strap-1 UPDATE 13/04/2020: NEWEST…

Downloads
126
Likes
3
Rating
0
P
PrintablesRedspirit

A320 detents for Thrustmaster T16000M

This mod mimics the A320 detents. I included the .step files in case you want to rearrange the detents or improve it. If the parts aren't fitting in the base part, sand it down, lower the flow rate or scale the base part by 0.5% in its…

Downloads
126
Likes
24
Rating
5
P
PrintablesPrinterich

OpenSCAD: Zahnräder und Planetengetriebe (v25)

Stirnzahnräder, Hohlräder, Planetensatz: - Zahnformen können beeinflusst werden: Kappen, Einzug, Kontur (nur Hohlrad), Schrägverzahnung - Planeten erhalten Markierungen für die Einbaupositionen - Zähnezahlen werden eingeprägt (bei 0,25 mm…

Downloads
125
Likes
4
Rating
0
P
Printablesgyozamonstah

Thrustmaster T16000M detent mod

This is an adjustable detent mod for Thrustmaster T16000m FCS. I designed this to have the following features: Adjustable detent position (center detent for full-range throttle, afterburner detents, etc.) Easy to remove and re-apply…

Downloads
124
Likes
41
Rating
0
P
PrintablesPotts

LTT Bit Holder Magnetic Retention - 60 Bit Split Insert

A quick remix of figterk's excellent bit holder for the LTT screwdriver. This is the 60-bit insert, split into 5 pieces. This is a split version of the 60-bit insert, enabling users to easily print in multiple different colors for each…

Downloads
124
Likes
19
Rating
5
P
PrintablesMajorDraco

Shifter Detent for Ford F-150, Expedition & Lincoln Navigator (2009-2017) | Fix for FL1Z-7210-BA

Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…

Downloads
122
Likes
5
Rating
0
P
PrintablesZ B

Centauri Carbon riser remix - no sliding top, no gaps for heat retention

This is a remix of the original to address a few issues I had: Cover was sliding off the back on some long prints due to vibrations Extruded the lip to match the front two pieces to fully retain the glass top PTFE guide was allowing too…

Downloads
122
Likes
11
Rating
3
P
Printablesoriddlero

Prusa XL TPU Full Feeding System W/ Internal PTFE Tube Retention Flanges

Full reduced friction feeding system For extruder number one on the Prusa XL from the left side mounted spool holder using an additional filament guide mounted using the same method as the OEM filament guides. The natural spring tension…

Downloads
121
Likes
23
Rating
5
P
Printableskjbturok

Retenedor para el tubo ptfe en Prusa Mini clon Fysetc

I was having clogging problems when finishing the assembly of the Prusa Mini from Fysetc and I found that there are similar devices in some creality that prevent the ptfe tube from separating from the heatbreak or nozzle and thus the…

Downloads
120
Likes
2
Rating
0
P
Printablesnlaverdure

Zero retention hopper for Rancilio Rocky

Requires 10-32 screws, 2.5" lg, qty 3

Downloads
120
Likes
16
Rating
0
P
PrintablesSilvian

Baofeng UV-5R Headset Speaker Mic Retention Bracket Fix

I have the same problem as most with the UV-5R. If you move the headset plug slightly, the radio will no longer work. There is already a solution for this here. However, I didn't like it because it is too bulky and you have to buy screws.…

Downloads
120
Likes
18
Rating
5
P
PrintablesEpes.Rades

Toy Frying Pan with Eggs – Pretend Play Kitchen Accessory (Improved Handle Connection)

Bring imaginative cooking to life with this adorable toy frying pan and eggs set, designed for kids’ pretend kitchens! 🍳 This playful pan features two stylized fried eggs. Features: 🍳 Fun frying pan with two cute fried eggs 🔧 Improved…

Downloads
119
Likes
47
Rating
5
P
Printablesnathanw

Argon Neo Wallmount, Remixed With Retention!

I had mounted my Argon Neo on the side of my Lack Enclosure, but was having issues with the case falling out of the mount over time. I remixed the design to introduce a retention clip. I opted for an interchangeable clip to allow reuse of…

Downloads
119
Likes
2
Rating
3.67
P
PrintablesDaTTcz

Stav na pletení náramků z gumiček-8 trnů čtverec (Rubber Band Loom-8 pins square)

Stav na pletení náramků z gumiček-8 trnů čtverec Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji

Downloads
119
Likes
17
Rating
5
P
Printableskaje

Sweetener Packet Holder - Portable

This small container holds 6 or 7 sweetener packets, and can be carried in a pocket, purse, or what-have-you. The lid is designed so that it stays attached to the holder, so it will not get misplaced. The lid is “hinged” in the middle to…

Downloads
118
Likes
16
Rating
5
P
PrintablesKloom

Sweetener Dispenser

Sweetener Dispenser

Downloads
117
Likes
17
Rating
5
P
PrintablesCorvus

Spool Holder Retention Clamp - Bambu Lab A1

Filament Spool Holder Retention Clamp for Bambu Lab A1 to prevent the filament spool from slipping off the filament holder My print settings for PLA: 0,2mm layer height 5 walls only one wall on top and bottom layers 5 top and bottom shell…

Downloads
117
Likes
16
Rating
5