Search results: fillament

Sort order

188 models

P

Fillament friendly Raspberry Pi 3 mount with hole for Mini-Rack Raspberry Pi Mount

This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling

Downloads
47
Likes
6
Rating
0
P
PrintablesLasse Lauesen

Ender 3 S1 Hypnotic Fillament Visualizer

Wanted a simpler version of the Hypnotic Extruder Visualizer, that fittet the Ender 3 S1 Sprite Extruder. It's two parts that i printed in PETG with 0.2mm layer height. They are made to pressfit onto the extruder stepper motor axle, and…

Downloads
631
Likes
62
Rating
4.86
P
PrintablesEngidahvs

Bambu X1C Side Mount Spool Holder v2 for Filler - Fillament Holder

Start with BC's excellent spool holder mount, add in a touch of BobbyMcWho's simplified back, incorporate Aikano9's adapter for HugoG's wonderful Filler - Filament Holder, add a chamfer to use less support and there you have it. All…

Downloads
539
Likes
94
Rating
5
P
PrintablesArenduk

Audi testing fillament

Hello, here is a file to test the filament and the printer. It is a small audi quattro, fast to print. For a better test I recommend to print with 0.07mm (ULTRADETAIL) .

Downloads
389
Likes
41
Rating
4
P
PrintablesMake It Lab

Airless Basketball Model – Fillamentum PEBA

This is our new airless basketball model designed for the amazing Fillamentum PEBA filament! This airless basketball filament has one of the best bounces we have tested, and also has amazing durability as well. Since the Kimya PEBA-S…

Downloads
361
Likes
26
Rating
0
P
PrintablesDarthxRinzler

Bambu X1C Side Mount Spool Holder for Filler - Extended Fillament Holder

I took Engidahvs' model, along with the PC4 M10 arm from BC, and extended it out 25mm to be more centered with the spool. I then joined them so it can be printed as one, solid model and added an elongated support so it's sturdy. This is…

Downloads
297
Likes
49
Rating
5
P
Printablesstrangnet

Fillamentum Sampler and Case

A recreation of the Fillamentum Sampler . Update 22/9/21: Added a little holder for 20 samples. It should have enough tolerance to give the samples some wiggle room. Update 25/9/21: Added a see-through lid.

Downloads
244
Likes
53
Rating
4.8
P
Printablesofer k

fillament dry box

silica gel box + fillament holder. this is a build made to hold a 3d printer fillament in a cornflakes box. the fillament is placed over two rollers with implanted bearings. three boxes hold alot of silica gel around the fillament. Print…

Downloads
217
Likes
43
Rating
0
P
PrintablesNarlyB

Fillament Guide

I needed a filament guide that had an easy feed/entry I used a "PC4-M10 Male Straight" Pneumatic fitting (you can search for them online at your favorite store) I printed the cap for aesthetics. Fusion 360 file included. Print…

Downloads
197
Likes
16
Rating
5
P
PrintablesTom Vít

Fillamentum NonOilen profile (Beta) for Bambu Lab X1C

Neither Bambu Lab Studio nor Orca Slicer contain a material profile for Fillamentum NonOilen , a great 100% recyclable material . ( More info about this material here .) ► I have prepared a material profile based on PLA and for use on…

Downloads
176
Likes
17
Rating
5
P
PrintablesSimple

Fillament Spool to Drill Adapter with M8 Rod

A simple fillament Spool to Drill Adapter with M8 Rod. Needed Material: M8 Rod - about 15cm 2-4x M8 Nut (counter Nuts make it more secure, but 2 should work fine)

Downloads
173
Likes
31
Rating
4.83
P
PrintablesKen Spicer

Fillamentum Rolling Tray

This is an original design I made specifically for Fillementum CPE HG100, though it should work in any food safe filament. The lower right corner is meant for a glass carb cap. STEP and F3D files included so folks can edit it themselves.…

Downloads
170
Likes
37
Rating
0
P
PrintablesMatthew Walsh

1KG Fillament Stand

An easy Print filament Stand @ 50g filament used to print and mounts a 1KG roll. No Support is needed.

Downloads
164
Likes
6
Rating
5
P
Printableskiklhorn

Ikea Lack enclosure five drybox in row no fillament buffer needed

03/2025 update: New bottom spool rollers, the center autorewind replacement. Hardware used(pcs for one box): 2x 608, 2x 688 bearing, 6x M3x10 DIN912 screws. Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. author of…

Downloads
152
Likes
26
Rating
0
P
PrintablesFliegerFriedel

Fillament storage box

english The box is designed to store unused filament spools in a dry place. The silicate container included for this purpose also prevents the filament spools from rolling back and forth thanks to its rounded shape. Print samples (24 x 24…

Downloads
150
Likes
22
Rating
0
P
Printablesengineererrant

Snap-Together "Master Spool" for Loose Filament (eSun Refillament)

A quick-printing snap-together spool for eSun's "Refillament." It sucks that, every time you buy filament, you're stuck with this absurd non-recycleable polystyrene spool that you just have to chuck in the garbage to be carted off to a…

Downloads
146
Likes
18
Rating
5

Fillament spool holder Direct Drive Ender 3

Hi there - i was looking for a robust and good spool holder to mount on top of my Ender 3 v2 I recommend my filament guide here https://www.thingiverse.com/thing:4712122 to fit in front of the spool holder. There was some but was really…

Downloads
144
Likes
27
Rating
5
P
Printablesmarigu

Fillament holder for PM spool

Filament holder for PM spool. ( https://www.filament-pm.cz/ ) Fusion360 file included if you want to modify it. Prusa i3 MK3 0.2 20 infill PLA no supports

Downloads
142
Likes
13
Rating
0
P
PrintablesJust Jasper

glasses holder modern (less fillament)

This is my moder glasses holder. I put focus on a tiny, compact and modern design

Downloads
132
Likes
15
Rating
5
P
PrintablesRod

Fillament Drybox

Combined a bunch of others drybox designs to create my existing setup. List of Purchased Parts: EZY Drybox 18L/19Qt from HomeDepot Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one…

Downloads
117
Likes
35
Rating
4
P
PrintablesOskar Pärn

Fillament spool holder

I hold my spools on a shelf and wanted evry spool holder to be printed same as the color it holds. NEW IMPROVED VERSION

Downloads
113
Likes
6
Rating
0
P
PrintablesEmperorArthur

Creality Ender 3v3SE Fillament Runnout Sensor Reverse Bowden Adapter

A reverse bowden tube adapter for the official Ender 3 V3 SE/KE sensor. Allows for the use of the original bracket. Important The sensor has the filament port slightly offset in both the X and Y direction. See the pictures for correct…

Downloads
112
Likes
21
Rating
0
P
PrintablesMMartynJ

Eibos Cyclops - Easy Access & Fillament change Spacer Assembly

Updated 25-02-22 Split main body, pivot back plate hex corrected to 7.1mm across flats for M4 nut I have designed this spacer and pivot assembly to make it easyer to change the filament on the Eibos Cyclops dryer. As good as the dryer is,…

Downloads
107
Likes
26
Rating
5

Fillamentum Filament Swatch

Print with 3 walls, 0,15mm layers and 15% infill.

Downloads
106
Likes
16
Rating
0
P
PrintablesWolfe

Low Fillament Marker Stand/Organizer

My girlfriend wanted a stand to organize her markers with but everything I could find online used too much filament or was modular with no nice way to move them around as a unit. Considering she wanted a number of these I figured I'd just…

Downloads
105
Likes
26
Rating
0
P
PrintablesRoland Korl

Fillament Holder

Anycubic Kobra 2

Downloads
97
Likes
8
Rating
0
P
PrintablesMiha

Fillament Spool Roller-Holder

Bearings used: https://www.amazon.com/PANTZ-Bearing-Section-61804RS-Bearings/dp/B0CNR (2pcs 32x20x7) Threads M30

Downloads
95
Likes
11
Rating
0
P
Printablesmail4mail

Roughly designed fillament spool holder for any cubic kobra S1 (300mm diameter/2.5kg)

Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…

Downloads
87
Likes
4
Rating
0

support fillament

3D model description suporte para rolos simples 3D printing settings layer 0.2 ou mais mínimo 30% infill

Downloads
86
Likes
17
Rating
0
P
PrintablesDr.Peter

Spool/Fillament Holder

Use some rubber at the bottom for minimal sliding, you can also fill the bottom with sand if you use the linear infill and for example use filament change to pause and fill the model

Downloads
78
Likes
2
Rating
0
P
PrintablesDr Mahbuse

Fillamenttrockeneinsatzt für Silvercrest Dörrautomat

Sollte in temperatur bestandigen Material gedrückt werden

Downloads
77
Likes
10
Rating
0
P
Printableshuskyte

Filler Roller in short for Fillamentum spools

A remix of the great https://www.thingiverse.com/thing:3020026 . It is just roughly 20 mm shorter and fits perfectly for the Fillamentum spools. Image for size comparison, left is the original size (but including a scale).

Downloads
76
Likes
14
Rating
0
P
PrintablesGuyFromNL

Creality Fillament sensorbracket

Bracket for mounting fillament sensor and supporting cablemess on the gantry of the CR and Ender series printers. Enjoy Print instructions Print it upside down with legs in the air. Enable "Support everywhere" so the small clamp will be…

Downloads
75
Likes
7
Rating
5
P
PrintablesRay

Creality Space PI Dryer Fillament Time and Temperature Chart

Simple Redesign of the filament dryer temps and time for the Creality Space PI Dryer. Can be printed without AMS or CFS if you pause and swap the filament on the text layer.

Downloads
73
Likes
33
Rating
5
P
PrintablesGliimps

Sci-fi Fillament Samples and Case

I was bored by plane looking filament samples and added some sci-fi elements to them. I also modified the Lid.

Downloads
68
Likes
30
Rating
5
P
Printablesbartoduivel
Downloads
66
Likes
6
Rating
5
P
PrintablesJenni

Flashforge Finder 2 fillament arm

Fits snugly to the side of flashforge finder 2, holds filament even if it is the smaller sized original Dremel Filament Print the base on the side, and the peg standing up. You will need a screw to fasten them together. Ask me if you got…

Downloads
66
Likes
5
Rating
0
P
PrintablesStoneAgeSkillz

Simple fillament spool roller

Simple fillament spool roller - fast print, easy to put together. Bearings, screws and nuts needed. Two wides included. One to fit standart spool wides and one to fit Fiberflex spool. Pieces to print: part A - 4pcs part B - 2pcs (wide or…

Downloads
65
Likes
14
Rating
0
P
PrintablesMax Delissen

Neptune 4 (Pro) fillament guide

For when you have multiple spools installed on your printer. The print simply clips onto the top rail of the printer, and you can feed the filament trough. Printed with 0.28mm layer height, and 35% infill. (less is probably sufficient)…

Downloads
65
Likes
10
Rating
0
P
PrintablesKiwiHuman

Fillament Guide for SOVOL SV06

A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder this is much smaller than the original filament spool holder and can be useful if you need to fit the printer…

Downloads
64
Likes
6
Rating
5
P
PrintablesSam Boyd

Fillament Roll

A Roll of Filament I made

Downloads
62
Likes
4
Rating
0
P
PrintablesAG

Ikea Skadis Deluxe Fillament Spool holder with roller bearings and scales!

I was massively impressed by InterlinkKnight's Digital Spool Holder project, but wanted one that could be mounted on my Ikea Skadis pegboards. The design of the spool holder is very good - if you want a super quality filament holder with…

Downloads
61
Likes
27
Rating
0
P
PrintablesCreAlec
Downloads
55
Likes
4
Rating
0
P
PrintablesMiaoucat

Swivel Wall support for Fillament Spool M8 5/16 mount

Wallmount Fillament Spool Angle Holder i rearanged my printing space and had no more vertical space. so i made this in order to mount the fillament spool on the wall have have the printer take the less space possible. Material: M8 or 5/16…

Downloads
55
Likes
8
Rating
0
P
PrintablesErwinDesmond

6mm to 4mm PTFE fillament filter

Updated 11/03/2023 [dd/mm/yyyy]: V1 Original version, has dimentions for 6mm and 4mm PTFE tubing, threads have an offset of .5mm for a well calibrated printer. However due to material shrinkage, and layer height selected this might not…

Downloads
53
Likes
7
Rating
0
P
PrintablesDamir Design

Fillament Roller (guide) With Bearings

Filament Roller With Bearings Parts like bearings,screws,nuts,washers on 2d layout

Downloads
52
Likes
13
Rating
0
P
PrintablesRaudonkepuris

Creality Ender 3 V3 SE fillament guide

Creality Ender 3 V3 SE fillament guide that mounts on top of the printer, instead of the stock spool hanger. Optimized for printing on the side of the guide cutout, probably would make more sense to optimize the model to print on the side…

Downloads
51
Likes
6
Rating
4
P
PrintablesMAK

Fillament Guide V2 for Creality CR-10s Pro V2

printed in PLA with 10% infil. I've created this model from scratch although it was heavily inspired by Terminal_6 https://www.printables.com/social/319444-terminal_6

Downloads
51
Likes
10
Rating
5
P
PrintablesArtonn

Prusa inclosure fillament tube sealer.

Some wood stumps feel out of the filament tube below the roof of my Prusa lack setup, so I took the original tube reversed it and made it in a way that you can just push it in below the filament guide into the enclosure. No glue required,…

Downloads
51
Likes
0
Rating
0
P
PrintablesBrice Thrasher

Fillament Wall Mount v2

Print at 0.28mm layer, 4 walls, 25% infill (if this model gets over 500 downloads i will make one for 3kg and 5kg)

Downloads
50
Likes
9
Rating
0
P
PrintablesHonza Kolář

Prusa MINI / MINI+ Fillament Trash Bin

Fits to the front of your Prusa MINI / MINI+ Helps you keep your desk / enclosure clean You can scrap directly from print sheet Recycle sign at the front - everybody knows that you are thinking about nature even when printing plastics…

Downloads
49
Likes
6
Rating
4.67
P
PrintablesVerris

Fillamentum Spacer - Repwinder

Spacer and end cap for fillamentum spools for the repwinder Print instructions 0.2mm, 15%

Downloads
48
Likes
5
Rating
5
P
PrintablesMythic Layers

Fillament Clip

Easy to print clip that uses custom lengths of filament with a friction lock. Probably also able to pull one strand of filament through all 4 holes for a stronger fit. NOTE: you might have to change scaling based on printer tolerances.…

Downloads
47
Likes
27
Rating
0

BBS fillament spool

Spool for filament 200mm. Consists of two parts connected by two short M6 bolts. Reel.

Downloads
47
Likes
4
Rating
0
P
Printables77 Skilzs

Fillament cutters modded for FFAD5MP and Free Handed

No instructions as this is a mod from another listing. The only thing I would recommend would be to us flat screws so the heads don't stick out and possibly interfere with the chain. If possible. See the other persons 45 degree cut photo.…

Downloads
46
Likes
4
Rating
5
P
PrintablesGiannisTDM

Ultra low fillament Extruder visualizer for Ender 3 s1 & MK3S/MK3 and others.

Thats pretty much all, Printed on normal PLA, no supports no nothing, A fast and stylish print, No magnet or other parts needed, snaps in place! Should fit all the prusa printers with an exposed extruder shaft of 5mm (MK3S/MK3 Plus and…

Downloads
45
Likes
4
Rating
5

Wall mount for fillament spools

Hey guys . I saw some ways of mounting rails to my walls for the spools i had but i thought every signle one was way flimsier than i imagined. So i designed this one , its pretty standart and im using 15mm hollow aluminium rods and it…

Downloads
45
Likes
11
Rating
0
P
PrintablesRitesh A

SOVOL sv07 plus fillament guide

this is designed to prevent the filament from tangling up with the printhead, it also reduces friction on the filament. It also reduces the friction on the filament when it is being pulled by the extruder, Imade this because im not using…

Downloads
45
Likes
6
Rating
0
P
Printablesleonardo lopes

Fillament spool support for Easythreed k7

2 versions: With spool support and only z axis guide! Spool holder for the Easythreed K7, using the model ( https://www.thingiverse.com/thing:4870760 ) as a base. What I did was create a new adapter for this part; the fit is perfect. It…

Downloads
44
Likes
3
Rating
0
P
PrintablesOndrashek

Fillament Cutter 45°

I wanted better access for filament cutter when I changing filament on Prusa Mini so I added nut to body. Just insert whole filament cutter with nut side to extrusion and rotate to fix it in place. Other files (top piece) and guide are…

Downloads
41
Likes
13
Rating
0
P
PrintablesGekon3D

Wall fillament spool holder

The wall-mounted filament spool holder for 3D printers is an excellent solution for saving space and making workspace organization easier. Its simple and functional design does not require support during printing, ensuring quick and easy…

Downloads
40
Likes
3
Rating
0
P
PrintablesSam Horne

Fillament guide pulley

Simple pulleys to guide filament using 608 bearings. Mounted using adhesive foam tape.

Downloads
40
Likes
6
Rating
0
P
Printablesravestop

Fillament Guide with ball bearing for IKEA SKÅDIS

You need two 608zz ball bearings. Print it slow, with support and at least 60% infill. Glue the ball bearing into the roller with instant adhesive. If you want to make a version with only one roll, take the two spacers.

Downloads
39
Likes
13
Rating
5
P
PrintablesRobin Kellner

Fillament Spool Adapter for Geetech (75mm) Spools

A Simple but effective Spoolholder for 75mm Rolls. Designed and Tested on Geetech Spools. As bearings just use 22mm standard ones. (608Z) Tip: Push the bearings in, while the part ist still hot from printing.

Downloads
39
Likes
4
Rating
0
P
PrintablesDovydunia

Prusa updated Fillament holder

The CF rod fits snugly within the printed holder and is repurposed from a broken drone leg: 🔗 Holybro S500 V2 Spare Parts I won’t be listing anything from AliExpress, as I do not endorse purchasing from them. The model is designed to fit…

Downloads
38
Likes
1
Rating
0
P
PrintablesChristos Mpi

Fillament Clip

Fillament Clip

Downloads
38
Likes
3
Rating
0
P
PrintablesEcholalia

Rolling wallmounted fillament guide.

This is a simple part that utilizes emmett's very good ‘Gear Bearing’. The model basically stacks several of those (which have been customized to suit the scale of this model) on top of each other, into a little roller, with rounded sides…

Downloads
38
Likes
8
Rating
0
P
PrintablesZoid

Fillamentum / Devil design spacer

These deeper caps are needed for clear spools from Devil design and Fillamentum.

Downloads
37
Likes
2
Rating
0
P
Printablesmikeeel

Big Spool / fillament Holder - 2KG or up to 105mm

Big Spool Holder to build you will need 4 12x18x4 bearings and m3x30 screw or longer

Downloads
37
Likes
5
Rating
0
P
PrintablesBTUKNO

Shorter Fillament Roller (SV06)

I removed some of the height of the original roller body and included two new roller designs - I am not very good with CAD yet so these were the best I could do. I remixed the original model so that I could stick this roller inside my…

Downloads
37
Likes
4
Rating
0
P
PrintablesZoltan

Simple fillament movement sensor

Discussions regarding fillament jams lead me to draw and print a really very simple fillament movement senzor. Bondtech gear movement indicator in the fillament jam situation does not show you, whether the fillament moves, the fillament…

Downloads
36
Likes
4
Rating
0
P
PrintablesLam

Fillament head catcher for wire cutter

Why I made this I really dislike how when I cut the fillament head (Which is often when I need to change fillament) The loose bit just flies all around So I made this contraption that can attach to your wire cutter Obviously it wouldn't…

Downloads
36
Likes
13
Rating
5
P
PrintablesFilip Ekman

Modular fillament roll stand, low material usage

Print however many segments and one end for each side and connect with 2x connector for each connection. Some supports required.

Downloads
35
Likes
6
Rating
5
P
Printablesmatthewslade

Top Fed Fillament spool holder bracket for Core One

You can put a long thread and 2 nuts through the center to hold it together or glue it together I guess The screw holes on the base of the bracket line up with the core one nylon rivet holes for the top cover, you can insert some M3x10…

Downloads
35
Likes
8
Rating
5
P
PrintablesHugo

IKEA Lack - fillament spliter

Other material: PTFE Tube ID 3mm x 5mm OD 2x M3x10 eventual PG7 cable connector

Downloads
35
Likes
8
Rating
0
P
PrintablesChris_Print

AMS 2 Pro BamuLab AMS 2 Pro Wall Mount with Fillament holder

Gedruckt mit PLA, 25% Infill, Füllmuster, 4 Wand Linien. Die Auflage für das Fillament bildet ein 16mm Kabelkanal mit einer Länge von 360mm. Alle Teile sind einzel Druckbar. Die Wandhalterung kann auch ohne die Fillamtenhalterung genutzt…

Downloads
34
Likes
2
Rating
0
P
PrintablesFRB3D

Elegoo Centari Carbon Fillament Sensor Spacer

Reduce the strain on your internal Filament tube with this handy spacer. Designed to mount to the original filament sensor holes on your Centauri carbon (you can even use the same M3 bolt). PRINT NOTES: This model must be printed on its…

Downloads
32
Likes
4
Rating
5
P
Printablesjimmylover

Fillament guide

remixed filament guide

Downloads
32
Likes
7
Rating
0
P
Printablessimiboy08

fillament holder

a fillament holder

Downloads
31
Likes
2
Rating
0
P
PrintablesJack Huchingson

Spool holder, modern, sleek, prusa, best print, fillament, bambulabs.

It works by inserting a one-inch PVC pipe cut to length to create the complete model. You place the PVC on top and then slide on your roll of filament. It uses a one-inch PVC pipe, cut to length.

Downloads
30
Likes
16
Rating
0
P
PrintablesJoey Thomasse

Fillament Rack

I used 20mm PVC pipes and 4.2 x 13mm screws

Downloads
30
Likes
14
Rating
0
P
PrintablesBrice Thrasher

Wall Mounted Fillament Holder

Expect a V2 very soon!

Downloads
30
Likes
6
Rating
0
P
Printablescolinsta

fillament holder

you can hold fillament.

Downloads
30
Likes
0
Rating
0
P
PrintablesPeterG

Fillament spool side mount for Longer LK4 Pro

FreeCad FCStd file is included. The holder has 3 parts that fit together without the need for any fasteners or glue. Mounts to the back left foot and horizontal rail above the main harness exit from the main board enclosure. To save…

Downloads
30
Likes
4
Rating
0
P
PrintablesBobbysmile

Ender 5 - Simple direct drive (reverse bowden) fillament guide.

Simple to print, easy to fit, and helps avoid the bowden tube snagging on the frame.

Downloads
28
Likes
4
Rating
5
P
Printablesbelpyro

Fillament guide carriage (remixed)

Material PETG. 100% infill.

Downloads
28
Likes
5
Rating
0
P
Printableslt_kraken

Modular Fillament Guiding System

So I bought a 2.3 KG fillament spool which didn't fit on the default spoolholder and due to its weight I didn't feel comfortable printing a longer spoolholder. This has led me to designing my own clean modular fillament guide system. At…

Downloads
28
Likes
5
Rating
0

Wallmount Fillament Holder V05

Filament Wallmount (can you use a rod of 40mm inside) Great resistance and low filament usage.

Downloads
27
Likes
4
Rating
0
P
PrintablesProginc

fillament hole

Filament rubbing not only increases friction but damages both the filament and the hole the filament is routed through this guide ads a layer of protection.

Downloads
27
Likes
1
Rating
0
P
PrintablesJack Almaguer

fillament insert for AMS lite

for pla on the A1 or A1 mini AMS lite that are 73 mm in diameter for inside.

Downloads
27
Likes
1
Rating
0
P
Printablescherrymanboy

Fillament Clip

Hello everyone Here is my fillament clip. Best way to print it is to use a 0.2 mm nozzle. Fit nice and tight. Publication of yours print profile is more than welcome. Enjoy!!!

Downloads
27
Likes
5
Rating
0
P
PrintablesErwinDesmond

Koppla rail printready less fillament (remix) of @volly

Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one. https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original…

Downloads
26
Likes
7
Rating
0

eSun Refillament Spool

Refillament spool for eSun refillament series filament, the spools have labels on them displaying the filament type on the spool. I have left a spool blank for custom logos etc. These are compatible with the Anycubic Ace Pro. I recommend…

Downloads
25
Likes
3
Rating
0
P
Printablesadsu

fillament storagebox / storage

This is just a normal fillament storagebox with option for drying filament with package for drying(I don t know how it s called and those packages usually comes with a filaments) and it s for 1kg filaments. WARNING: The window for the lid…

Downloads
25
Likes
2
Rating
0
P
PrintablesTifn

Reusing empty spools with Esun refillament

I just wanted to share this very simple technique : cut common empty spools into halves and glue them on the sides of Esun refills, to spare some plastic. The majority of my 1kg spools have a 90mm small diameter that fits perfectly inside…

Downloads
25
Likes
7
Rating
0
P
PrintablesErwinDesmond

WIP Sliding fillament welder (metal)

Fillament welder / joiner holder. Found it anoying as frick to operate using 1 hand. So i made a contraption to hold it in place, so that i can slide it to gether, join the fillament. then slide it out. Together with a hole to place a…

Downloads
25
Likes
2
Rating
0
P
PrintablesJayCliff

Spacer for Elegoo Centauri Carbon 1 to allow space inside for Sunlu Fillament Drier

This is a very BETA model. I drilled a hole for the power for the filament drier (because I forgot to model it!). I used threaded inserts for the panel side. You need longer screws. Holes are in place to glue magnets but I've not done…

Downloads
24
Likes
14
Rating
0