Search results: fir

Sort order

5,674 models

P
Printablesgkmakeit

First Layer Calibration

Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…

Downloads
24,411
Likes
1,794
Rating
4.99
P
PrintablesBoogie

First layer test 60x60 mm square / Z calibration

First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG

Downloads
21,821
Likes
863
Rating
4.93
P
PrintablesBoogie

First layer test 100x100 mm square

First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square

Downloads
13,167
Likes
207
Rating
4.89
P
PrintablesAnton Granata

The World’s First Working Print in Place Rubik’s Cube

The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…

Downloads
11,819
Likes
2,294
Rating
3.79
P
PrintablesPunkgeek

Prusa mk3 bed level / first layer test file

It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…

Downloads
7,632
Likes
180
Rating
5
P
PrintablesFreshPrints

Anycubic Kobra 2 Pro Bed Level First Layer Calibration Squares and Brim Test Also works with Kobra 2 / Kobra 2 Neo

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…

Downloads
6,450
Likes
304
Rating
4.89
P
PrintablesPax Prints

Lego Compatible Outlet and Light Switch Cover (FIRE HAZARD)

(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…

Downloads
5,174
Likes
1,419
Rating
4.94
P
PrintablesR3D

Combined First Layer + Adhesion Test

The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…

Downloads
5,112
Likes
119
Rating
5
P
PrintablesJCPhlux

First Layer calibration

I needed a better way to configure my first layer. I use this print to do live z adjustments. Print instructions I find this to be a good test. it handles allot of the shapes that will ruin a print of the first layer does not have a good…

Downloads
4,980
Likes
209
Rating
4.73
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Bed Level First Layer Calibration Squares Aligned with Bed Screws and Brim Test

This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…

Downloads
4,932
Likes
194
Rating
5
P
PrintablesZach

Glory - Wings of Fire

A friends' kids are big fans of the Wings of Fire series, and I was asked for a model of Glory from the series - their favorite dragon. I've put together a model of the character leveraging some great existing models created by MZ4250 who…

Downloads
3,817
Likes
455
Rating
4.94
P
PrintablesLimaMike3D

Aircraft Wallart Series Supermarine Spitfire Mk.IX

Wallart or decoration of the mighty Spitfire. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files). Can be scaled up (original model is aprox. 1m long and 7mm thick -…

Downloads
2,441
Likes
608
Rating
4.94
P
Printablesmichalgerhat

Airsoft MP5 Flashlight Handguard for SureFire weaponlights

Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…

Downloads
1,249
Likes
129
Rating
5
P
Printables3DLabPrint

Supermarine Spitfire Mk IX

This are just test Gcodes (two) for next info (userguide) please look at : https://3dlabprint.com/shop/supermarine-spitfire-mkix/

Downloads
1,029
Likes
144
Rating
0
P
PrintablesPresswerk65

Amazon Fire HD 10 (2021) Wall mount

General: There was no wall mount which checked all my needs, so I designed this one. The power connector is hidden behind the cover, nevertheless you can still access the buttons for power and volume. Mount instructions: First, you have…

Downloads
927
Likes
123
Rating
5

The first steam locomotive

The first steam locomotive by Richard Trevithick , a British inventor from 1804. I was looking for some mechanical model and I found this locomotive, I really liked it, so I tried to make a 3d printed model for those who like history and…

Downloads
918
Likes
301
Rating
5
P
PrintablesMaSc

Feuerwehr Logo / firefighter logo Colorchange

Hier das Feuerwehrlogo für Colorchange Farbdruck. The german firefighters logo for colorchange.

Downloads
910
Likes
47
Rating
5
P
PrintablesRaphael Schaaf

Robust Nerf Sledgefire Shell

Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…

Downloads
874
Likes
83
Rating
3.4
P
PrintablesPrintineer

Integrated Support - The World's First Working Print in Place Rubik's Cube

Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…

Downloads
847
Likes
116
Rating
4.67
P
PrintablesDominik Trunec

Rescue wedge firefighters - Dveřní klín pro hasiče

eng: Wedge under the door that firefighters and rescuers can use. The wedge is modeled directly for use by firemen in traffic accident fires and other activities. The product is used at your own risk (everyone with an ID card knows what…

Downloads
771
Likes
112
Rating
5
P
Printablesmchangcreative

QUICK first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles

If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…

Downloads
573
Likes
50
Rating
5
P
PrintablesCrazyBird199

Terran 1 - The World’s First 3D Printed Rocket.

This is the model of the Terran-1 GLHF (Good Luck, Have Fun) rocket, which had a partially successful first launch a few days ago, March 23, 2023. Relativity Space has some info on their rockets at https://www.relativityspace.com/rockets…

Downloads
508
Likes
149
Rating
5
P
PrintablesEricFrenk

Firearm Safety Sign

A sign I created with the 4 cardinal rules of firearm safety. Can pause the print midway for color change or print using the gcode provided. Fits the Prusa Mk3 print bed.

Downloads
424
Likes
83
Rating
5
P
Printablesmchangcreative

DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles

If you simply want a fast way to set or confirm your Z heights, try my QUICK first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . Use these DETAILED files if you are willing to take more time and really dial in…

Downloads
414
Likes
44
Rating
5
P
PrintablesD3DCreative

Amazon Fire Stick TV Remote Holder

Designed to be light and stylish, can be freestanding or wall mounted with a 3M Double Sided Sticky Pad (15mm x 15mm) Easy to print and shouldn't require a brim or glue, but that depends on your printer. Only 11g of filament needed,…

Downloads
412
Likes
23
Rating
5
P
Printablesi5cemi

Wandhalterung Remote Fire TV Sprachfernbedienung Pro

Wandhalterung Remote Fire TV Sprachfernbedienung Pro. Sie unterscheidet sich leider von der Form zur “normalen” Fernbedienung. Wert wurde auf abgerundete Kanten und tief sitzende Schrauben gelegt um ein verkratzen der Fernbedienung zu…

Downloads
396
Likes
11
Rating
5
P
Printables0x3D

Peli 3310 holder for MSA fire department helmets

Use the stronger v4 as v3 might break. Use a flat-head screwdriver for installation. Holder/adapter for a Peli 3310 for fire department helmets Developed with a MK2.5 Be careful when inserting flashlight, use images Print instructions…

Downloads
395
Likes
38
Rating
5
P
PrintablesDanielAlex

Star Wars Crimson Firehawk

The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…

Downloads
332
Likes
65
Rating
5
P
Printablesvermontsfinest

Fire 10 HD Tablet Stand

Fit for a 10.1" 2019 Release, 9th gen Print Settings Printer: Ender 3 with Ender Extender kit Supports: Yes Resolution: 0.2mm Infill: 20% Filament material: PLA Charging wire used:…

Downloads
274
Likes
23
Rating
0
P
Printablesnoahimhere

The H, the most sophisticated first layer calibrator of all time

I was looking at some other print tests when I came to the conclusion that they were way too simple. So, you know what I did? I removed 2/9 of the average first layer calibration test, and called it a day. It does have its advantages,…

Downloads
241
Likes
9
Rating
5
P
PrintablesART TOO

Tollerance Test / Dimensional Test: Inner Tollerance, Outer Tollerance, First Layer Tollerance, Top Layer Tollerance, ...

Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!

Downloads
223
Likes
34
Rating
5
P
PrintablesLinus Buda

Konfirmation Dekoration/Geschenk

Dies ist eine runde Dekoration/Geschenkverschönerung für die Konfiramtion mit christlichen Symbolen. Am besten auf 2x drucken, einmal der Ring mit Dekoration und einmal der Fisch. Die beiden Teile passen dann perfekt ineinander, sodass…

Downloads
191
Likes
18
Rating
5
P
PrintablesOeschMe

First layer adhesion test

Had some problems with some filaments not sticking to bed, so I made few benchmark shapes and sliced them in 5*C intervals between 180-230*C Some times the temperatures given in box are not the best ones ;) Files are sliced for Prusa…

Downloads
177
Likes
12
Rating
5
P
PrintablesDominik Trunec

Držák svítilny na hasičskou helmu bez šroubů (Fire helmet torch holder without screws)

The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí

Downloads
175
Likes
30
Rating
5
P
PrintablesRiccardo Bonomi

firefighter keychain

This minimalist Fire Department keychain draws inspiration from the clean, bold lines of the official emblem, a symbol of courage, dedication, and service. I printed it in PLA, using a 0.2 mm layer thickness and 100% infill to ensure…

Downloads
164
Likes
22
Rating
0
P
PrintablesAinon3Dtisk

Calibration of the first layer test for all printers

Hello, Today I have for you Calibration of the first layer test for all printers. Ideal for all printers. Contains models: 225x225 -256x256 -300x300 -350x350 -400x400 Beautifully set up the perfect first layer! :-) I used PLA as the…

Downloads
160
Likes
8
Rating
0
P
Printablesgerolori

Auto heated bed Elegoo Neptune 4 Pro in OrcaSlicer (with stock Klipper/Firmware)

Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…

Downloads
156
Likes
55
Rating
0
P
PrintablesAdr1an

First Layer Test

Introducing our Prusa MK3S+ First Layer Test Sheet – the ultimate diagnostic tool designed to put your 3D printer through its paces. Crafted with precision and expertise, this flat sheet is your go-to solution for evaluating every aspect…

Downloads
153
Likes
8
Rating
0
P
Printables75echo

First aid bag- scale models for diorama 1/14, 1/16 ,1/12,1/10

Upload your makes, i would love to see them.

Downloads
146
Likes
32
Rating
5
P
PrintablesPeter

Mini First Aid Kit

Mini First Aid Kit Why do you want this? I think we have all had situations where we wish we had some band-aids or alcohol towelettes with us. This small first aid kit is perfect to toss into your cars glovebox in case you ever need it.…

Downloads
146
Likes
44
Rating
5
P
PrintablesPeter Hadfield

First Order Helmet Grill

I struggled with the Grill template (until I realised it was meant to be printed in A3 Duh!) by which time I had already started this “project”. It's scaled to the original downloadable files so if you change the scale to fit you will…

Downloads
138
Likes
31
Rating
5
P
PrintablesEKillick

First Generation Apple Pencil Holder

A holder sized to fit a first generation Apple Pencil. Can be easily modified to accommodate a pen/pencil of any size! I printed mine at 20% infill and with more solid layers at the bottom to add more weight but I don't think it was…

Downloads
134
Likes
24
Rating
4.67
P
Printablesjurassic73

Firewalla Purple - Mounting Bracket

Print with supports in PETG. You can forego supports and test your printer's bridging. :) Mounts using a few smaller wood screws.

Downloads
132
Likes
13
Rating
5
P
Printablesnick779

Rimfire Pistol Maintenance Stand

I designed and printed this after seeing that similar stands were $20 and still required a vise. I don't have a vise, so I took some measurements and made a stand that holds the gun up by the magwell. The tip of this sits on the mag…

Downloads
132
Likes
18
Rating
0
P
PrintablesSirPrintsALot

Dyson V8 Wall Mount Adapter for CrossfirePower Milwaukee Battery Adapter

If you have a CrossFirePower Milwaukee battery adapter on your Dyson V8 this will let you still use the wall mount that came with your vacuum. I printed mine flat-side down with no supports using Overture PETG in grey. I had to sand the…

Downloads
126
Likes
23
Rating
0
P
PrintablesDanielAlex

Star Wars First Order TIE Bomber

The First Order TIE Bomber first appeared in Star Wars: Resistance. It is similar in design to its imperial predecessor, but more refined. The cockpit- and ordenance-pods are shorter and with more structure around them. It uses inverted…

Downloads
118
Likes
12
Rating
0
P
PrintablesMeesterEd

108mm Large Fire Extinguisher Holder Bracket

Resized Fire Extinguisher or Gas Torch Holder by The_BeardBot to fit my larger 108mm diameter extinguisher. The screw holes sizes are in tact so the same hardware can be used. I just used some doubled up electrical tape for the strap.…

Downloads
116
Likes
20
Rating
5
P
PrintablesAAME

Backfire Ranger X2 plug and play fenders

I printed all parts in petg and used a 3mm carbon rod to hold the fender. The front fenders rods length should be 76mm and for the rear fenders 70mm. The parts stay together without glue, so you can remove and carry all the parts in the…

Downloads
116
Likes
6
Rating
0
P
PrintablesNikola

GLOW in DARK CLASSIC IPSC DRY-FIRE TARGET

Glow in dark IPCS targets, great for indoor and outdoor practice. You can use them in dark or in standard condition even in rain and snow :') When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at…

Downloads
110
Likes
12
Rating
5
P
Printablesjmpub

Longer Lk1 / Alfawise U20 Firmware Marlin 2.0.8

Longer Lk1 / Alfawise U20 Firmware Marlin 2.0.8 Firmware que criei para a minha Longer Lk1 com o ultimo marlin e algumas modificações. Firmware that I created for my Longer Lk1 with the last marlin and some modifications. Print Settings…

Downloads
107
Likes
1
Rating
0
P
PrintablesNeti

FIREWALL 6100 / 4100 1U RACK MOUNT (pfsense)

4x M4 x 40 screws needed for the 6100 or 4100 firewall (optional) velcro tape for the powersupply (optional) c14 to c7 adapter v5.0 with enhanced stability v4.2 1st online release Print: front to print bed (look at the print 3mf)…

Downloads
103
Likes
4
Rating
5
P
PrintablesaRGiRob

25c usd, 1€ and 2€ shopping cart coin. with name first letter

This is an object that everyone uses at least once a week, it is small and requires only 63cm of filament to be printed at 100% infill. I have printed dozens of them for each friend who sooner or later is forced to go shopping, print it…

Downloads
100
Likes
12
Rating
4.5

Car fire extinguisher holder

Car fire extinguisher holder A simple fire extinguisher holder under the driver's seat. Secure attachment and quick use thanks to the use of Velcro. Carrying it in the trunk is the same as not having it at all. With this holder, you have…

Downloads
98
Likes
77
Rating
0
P
PrintablesDaParts

First Layer Temperature Calibration - MK4

A lot of people seemed to be having problems with wavy lines across the first layer of their prints due to too hot of temperatures, myself included. So I made this G-Code file in order to calibrate what temp you should use. DO NOT JUST…

Downloads
96
Likes
43
Rating
5
P
PrintablesEndrju

Morakniv Garberg Multi-Tool fire starter holder

Holder for fire starter for Multi-Tool system compatible with Garberg and Kansbol

Downloads
95
Likes
20
Rating
0
P
PrintablesHPC_Patrick

Ezio Auditore da Firenze Logo

This plate is intended for mounting the plate on a piece of furniture or wall. Holes for the screws have been deliberately omitted, but should not be a problem with a borer. It was printed with PLA black and white.

Downloads
95
Likes
34
Rating
0
P
PrintablesAustinDynamics

Dozer (FIRST Robotics)

Edit 1/30/2026: Finally checked this page after 2 years and saw the comments about the scaling issues. Went through and remodeled each part to match the dimensions I printed it at in 2024. The model is still not optimal, as I made this…

Downloads
93
Likes
23
Rating
5
P
Printablesesox

FireHydrant Soldering Clamp

When I solder I often miss the third hand, so I created this simple tool to hold and stabilize a wire, component or a tiny board. It prints quickly and needs a few drops of glue for side clamps. You could use it for uther small objects…

Downloads
79
Likes
18
Rating
5

1982-1992 Camaro - Firebird Battery Tray Base

Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.

Downloads
74
Likes
15
Rating
0
P
PrintablesMan-in-Black

Fire HD 8 Vertical Wall Mount

I wanted to use my old Amazon Fire HD 8 tablet as a smart home center and hang it on the wall accordingly. Unfortunately I couldn't find a suitable holder for it. This one is fairly easy to print and then attach to the wall with nails and…

Downloads
72
Likes
4
Rating
0
P
PrintablesRaphhorn

Yamaha Superjet/Waverunner Fire Extinguisher Cap

printed in PETG & TPU not 100% Watertight but it has a decent fit i uploaded the f3d file so if you edit it to be watertight may share a remix of this :)

Downloads
65
Likes
3
Rating
0
P
PrintablesJellyTitan

Kindle Fire 7" Vertical Wall mount

Screws onto the wall and holds a 7" kindle fire. These older model kindles can be picked up for fairly cheap on sites like Woot. They make for excellent Home Assistant wall mount control panels. This holder was built specifically for the…

Downloads
63
Likes
7
Rating
5
P
Printablesatadres

P-Clamp for Prusa Enclosure Fire Suppressor System

A 3D Printed version of the P-Clamps used for Fire Suppressor System (BlazeCut “T” Series System T025E) You must print 2 P-Clamps and get two M3 8mm screws with respective lock nuts.

Downloads
62
Likes
9
Rating
5
P
Printablescsthomas84

Replacement Cowling for Guillow's 504 Supermarine Spitfire Model Airplane

Everyone who has flown one of these models long enough has experienced a cracked cowling. This is a printable replacement part for Guillow's 504 Supermarine Spitfire balsa model airplane. A tiny bit of infill with single walls compares…

Downloads
52
Likes
4
Rating
0
P
PrintablesTDCN

Sofirn BLF-LT1 handle - Flashlight handle

Carrying handle for my Sofirn BLF-LT1 Lantern Flashlight. Written in open scad and the code is a bit of a mess. sorry.

Downloads
50
Likes
5
Rating
0
P
PrintablesKarsten

Feuerrohr-Trichter für Pellets - Fire tube hopper for pellets

Das Rohr hat einen Innendurchmesser von 55 x 55 mm. Der Trichter wurde unten mit 52 x 52 mm gedruckt (Aussenmaß), damit passt er auf jeden Fall. Die obere Einfüllung hat einen Durchmesser von 150 mm. Gedruckt in PLA. The tube has an inner…

Downloads
49
Likes
4
Rating
5
P
PrintablesMadeinSwabia

Hexagon shelf with recess for a first aid kit / Regalbord mit Vertiefung für KFZ-Verbandkasten

Hello friends from all over the world :) Since I am used to the first aid kit mandatory for cars, I always have a second kit at home. It’s very handy, because I store it at a central spot in the house. I never have to search for it.…

Downloads
47
Likes
6
Rating
0
P

Octavia 1 první gen. držák na pití plechovky / Octavia 1 first gen. drink can holder

Držák Plechovek který pasuje do otvoru vedle řadicí páky jde tam pěkně na tucho ale sedl. (U mě nejde použít klasicky)

Downloads
46
Likes
6
Rating
0
P
Printableslegomantwist8

Amazon FireTV Remote Banana Cover w/ AirTag Slot

Added Airtag slot to the banana. I do not have an AirTag, I made this for a friend. I am not sure if it will fit, although, I know the remote does.

Downloads
44
Likes
5
Rating
0
P
PrintablesTELDON Computer

COVER for Fire TV stick remote

The original object does not have a flat surface on the back, plus I prefer a larger opening. Inserting the remote is very difficult, because the original file... but it fit. I just cut a slice on the bottom and a larger hole on the top…

Downloads
39
Likes
6
Rating
0
P
Printablessteffanders

Eufy HomeVac H11 first Generation air outlet

The first generation Eufy HomeVac H11 suffers from a major design flaw. the air outlet of the motor blows straight down. When vacuuming on a surface, the dirt is thus blown away faster than the vacuum can suck it in. This simple grommet…

Downloads
37
Likes
7
Rating
5
P
PrintablesHussain

Original Prusa XL- Single Tool First Layer Test

This is First layer test for the Original Prusa XL Single Tool 360 X 360 X 0.2 MM Available for Gcodes for PLA & PETG

Downloads
37
Likes
3
Rating
0
P
PrintablesBruno Germany

Holder for external fire extinguisher (1000 ml)

You can fix the holder with two screws on a surface. The holder is fine for fire extingushers with 7.5 cm diameter. You need some support material to print the holder (please see the attached pictures). The holder is designed with Fusion…

Downloads
30
Likes
1
Rating
0
P
PrintablesToners603

Daily Affirmation Card Holder

This is a remake of the card holder made by Jundy. My wife has some Daily Affirmation / motivational cards that needed a new box for. I found a free dxf file for a mandela design that I thought she would like and added it to the lid.…

Downloads
26
Likes
5
Rating
5
P
PrintablesEich

InfiRay P2 Pro Thermal Camera case for camera and Lightning to USB-C Cable

This case is slightly bigger than the previous one. It can take the camera and magnetic lense plus the original apple “Lightning to USB-C Cable”. With this cable the camera works in connection with my iPad air without any problems. The…

Downloads
26
Likes
2
Rating
0
P
Printablesdr4x0n

Dumpster Fire Personalized

I was trying to reduce the amount of filament the orignal model used. I also personalized it.

Downloads
26
Likes
4
Rating
0
P
PrintablesJosh prints

Mini Cooper/First/One R56 2006-2013 (1:43 scale))

Print with supports for underside and mirrors. Infill can be quite low (5-10%) Doesn't need to be strong. Sliced files are added for an ender 3. The two sides will glue together or can be printed as 1 whole part.

Downloads
25
Likes
3
Rating
0
P
PrintablesFuzzySpace

Holder for domestic fire alarm

Holder for domestic KIDDE fire alarm model 0914. Autofusion 360 model included to allow easy adjustment for other brands. Print with 0.2mm layer height and no supports.

Downloads
25
Likes
2
Rating
0
P
PrintablesEva Máčová

Wall Art - Prehistoric - Fire

You do not need MMU for this print, just change filament color when there is change in thicknes.

Downloads
25
Likes
11
Rating
0
P
PrintablesSneh

SU27 Firewall

This is a 3d print file for the SU27 RC model that can be purchased on aliexpress here:…

Downloads
23
Likes
3
Rating
0

Hub Centric Rings for 1982 thru 1992 Camaro / Firebird

This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…

Downloads
22
Likes
5
Rating
0
P
PrintablesCheese

Battery cover for a Skytech fireplace remote control

This is a replacement cover for a Skytech model SKY-1001 fireplace remote control battery compartment. The fit still doesn't perfectly match the sides of the remote, but it stays in place reasonably well and it covers the battery…

Downloads
22
Likes
0
Rating
0
P
PrintablesInfillTech

Cyma CM.125 USP Fire Selector Pin/Positioning Grain/Spring Guide

This is a replacement for the Pin that makes the snap mechanism of the fire selelctor switch of the Cyma 125 (USP) possible. It is that thing that flew across your room, nowhere to be found, when you took out the fire selector unit out of…

Downloads
20
Likes
2
Rating
0
P
PrintablesPrintgoburr

Baby's First Ab Roller

I wanted an ab roller but did not want to buy one because 2 day shipping is way too long! So I decided to print my own ab roller in 2 days and double the price of an ab roller. That's what we call efficiency me bois. Yeah, get that 8…

Downloads
20
Likes
10
Rating
0
P
PrintablesZdeněk

Campfire Fork Rack (držák na opékací vidlice)

Easy design and easy print. The attached models take a size 3.5 metric woodscrew, ideally 3.5×35 or 3.5×40 with a countersunk head. Of course size 3 or size 4 (with a little force) will work nicely, too. The basic model, where also the…

Downloads
19
Likes
4
Rating
0
P

Fire Escape Ladder Sign

This sign simply points out where a fire escape ladder is, so that people can find it more easily, and escape quickly in case of a fire. Print instructions Print at the size given. Print the letters in a different color filament. That is…

Downloads
19
Likes
1
Rating
0
P
PrintablesHonza Šefčík

First Layer Calibration Pattern for atypic nozzle diameter

Default for nozzle 0,10 mm (you can edit in slicer or also directly the model in Fusion 360)

Downloads
19
Likes
0
Rating
0
P
PrintablesWim V

Cute Lit tle FireFly

A Cute Lit tle FireFly, using one Led and a CR2032 button cell battery. This little companion brings a little light into the darkness. tip: Print the body in Glow in the Dark filament for a soft afterglow effect. The base consists of 3…

Downloads
18
Likes
11
Rating
0
P
PrintablesAva

The firefly downlight

The firefly downlight Functional, minimalist and modern downlight meant to be hung on the bottom of a cabinet or similar. Designed with kitchen use in mind but can be used wherever you like. The design is free and open source, easily…

Downloads
18
Likes
1
Rating
0
P
Printablesalromh87

First Layer Calibration Pattern [from Prusa MK3/MK3S firmware] for *Non Prusa Firmware*

I have a couple of Original Prusas so I'm very used to do first layer calibration with pattern available on the firmware, so when I built a MK2 using Marlin on RAMPS I wanted to use the same tool for calibration, so thanks @jonnieZG for…

Downloads
16
Likes
0
Rating
0
P
Printablesh2odragon

Stumpy's AOK Fireworks sign

100x160mm sign, advertising Stumpy's Fireworks shop. He does saw repair too. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also…

Downloads
14
Likes
4
Rating
0
P
PrintablesOBA

Water Kefir Strainer Insert for Weck-Jars with Opening "Massivrand-95" (> 1.000 ml )

Motivation [ water kefir production ] Water Kefir is a drink made from water, sugar, lemons and dried figs. With the help of "water kefir crystals" (living organism), a prepared mix of ingrediants turns into a drink (similar to lemonade)…

Downloads
13
Likes
2
Rating
0
P
PrintablesMichal Pešek

Firewood basket replacement handle

“Once upon a time, a very tired man (who has the same name as me) brought the next wood to the fireplace. Puted down a basket near fireplace and … probably a little closer than usual.” :-) What do you need: 9x M4x10 countersunk head screw…

Downloads
13
Likes
1
Rating
0
P
PrintablesFalling Entropy

Alien Skin Mouse - HyperX Pulsefire Saga

A custom alien skin for the HyperX Pulsefire Saga mouse. The color printed in the photos is Matterhackers Pink-Blue Silky Magic PLA.

Downloads
11
Likes
7
Rating
0
P
PrintablesTheGrantz3D

Replacement Firewall for a Great Planes Gee Bee R-2

This firewall is a replacement of the balsa and ply firewall in the original airplane. Print instructions I printed this with the standard setup at .20 layer thickness. You could probably stand to print with a .60mm nozzle for speed and…

Downloads
11
Likes
1
Rating
0
P
Printablescollind104

First Lite Logo Plate

7" x 4" embossed First Lite logo with backer plate. 3mf file is setup for .40mm extruder and 2-colors with .20mm layer height except first layer at .35mm.

Downloads
10
Likes
4
Rating
0
P
PrintablesTec

Party fire fountain holder / Držák ohnivé párty fontány

Some party fire fountains are sold together with holder but some of them not. This model is designed as a substitute for the missing (original) fountain holder. Fountain diameter 14.5 mm and above, bottle neck 26 mm and above. Print…

Downloads
10
Likes
1
Rating
0
P
Printablesh2odragon

Firey but Mostly Peaceful sign

100x160mm sign, commemorating some of the more absurd seasonal propaganda . Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also…

Downloads
9
Likes
6
Rating
0