4,000 models
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…
A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…
This is a new battle spinners . She's modular with the "Touprusa" because i used my own mecanism, it is adaptable with the Touprusa ! To build it the version with metalic screw, you'll need: x6: M2 screws, 10 mm (3 for the launcher and 3…
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
This is a simple block for storing SD cards and flash drives. Printed mine with an 0.4 nozzle and 0.2 layer height. If you print the model upside-down (with the holes on the bottom) you'll get some really perfect holes and a smooth…
Attacchi torcia vari per avere sempre una torcia sulla slitta picatinny Si monta con SINGOLA VITE M4x30
This was Designed and Printed for my Colleague. Its a Killflash insert for the Scope Cap thats just a push in fit. Designed in Tinkercad, Open on Tinkercad License: CC BY-NC-SA 3.0
Cache griffe flash - Camera Hot Shoe Cover
This accessory slides onto the end of the Wuben G5 flashlight and serves in place of the keyring or lanyard hole, allowing use of the magnet feature without obstruction. Just slide this onto the magnet end of the Wuben G5 and attach to…
I wanted a flashlight holder for my NERF gun, but the one I tried printing just didn't work for me. So I remixed it. I have made this so that it does not require any supports to make printing easier. Printing Settings: Resolution : 0.2…
Protection cover for Canon Speedlite series' hotshoe Successfully tested on: Canon Speedlite 430EX III-RT Canon Speedlite 470EX-AI Canon Speedlite 600EX II-RT
Cover for all pentax dlsr cameras, with a fixed hot shoe
Designed to protect the bulb of a Flashpoint Xplor 400 or Godox AD400. Clicks into the bowens mount and covers the bare bulb. I wanted something to replace the 2 piece cover it came with because it kept falling off and I didn't want to…
This mount is available in two versions: Pressure (with three different diameters) and to be able to attach an elastic band. Universal: it consists of one more part that is fastened with two M3 screws. Each part needs a small support…
Money Tic Tac Toe This version of Tic Tac Toe, aims to introduce a more exciting component in the challenge of winning. It can be played with Tokens/coins of Dollar (black) and Euro (orange), created for this purpose. After the end of the…
The wrench has a nominal value of 20mm and the actual opening of 20.00mm as well. For the best results you should take into account your printer tolerances and have it properly calibrated. The wrench thickness is 7.4mm. Use 100% infill.…
These are the all the parts I use to lighten the printhead of the FFCP, improve cooling and cable management for single extruder use. Needed hardware: 6 x short M3 heatset insert (CNC Kitchen) Optional: 2nd cooling fan + 2 x M3 heatset…
A Picatinny Mount for a tiny flashlight. (13mm diameter) I also included a version for 14.5mm diameter, to hold on to the wider front part of the flashlight. It was made for the MecArmy X2S flashlight. Additional hardware: 2x M3 nut 1x M3…
A stand for your olight baton 4. Print in 2 pieces for better quality. I m using PLA 230°C 60°C 40% infill 0.4mm noozle 0.2mm layer height PRINT WITH SUPPORT FOR THE LITTLE PART!
Flashlight holster designed specifically for the Sofirn IF22A. Parametric .f3d file included so you can customize the clip to your needs. Easily remixable for other flashlights. Updated model no longer has a bottom, unlike in the photos.…
Flashlight mount/holder for an Olight Warrior 4X flashlight, that can be mounted onto walls or cabinets with screws. Screw recesses were designed for #8 wood or drywall screws. The Olight Warrior 4X flashlight pressure fits into the…
Version 2 (more like 5.2) now with thinner grid at 0.4mm thickness! Including the Fusion 360 file! Whether in airsoft or out in the woods, shiny stuff is really easy to spot. The front of your flashlight is a large perfectly reflective…
Box for flash drives, opening on two sides. Lid without spontaneous opening.
This is an add-on for the Tool-Check Modular from the Wera Advent Calendar 2024. It can be easily inserted into the existing rail. It is suitable for the following S11 LED flashlight. (RovyVon A5) The head of my lamp has a diameter of…
I wanted to use a small flashlight as a spotlight to accentuate the awesome sound-dampening panel that friends created me for Christmas for when I'm recording videos at my desk, so I designed a parametric solution in OpenSCAD. After…
This is a stunning decoration featuring hex pattern that you can clip on the original USB flash drive that is provided by default with the Prusa Mini. It's not stunning for the design but because it helps intuitively finding the proper…
Killflash to fit on Predator V3 Tacticon Red Dot Fits like a glove on the Predator V3 Tacticon Red Dot and is simple to press on . Is a tight fit so should never fall off unexpectedly.
37mm diameter diffuser for Ledlenser P7 (P7R excluded), T7 series Print settings: Filament: Translucent filaments. Layer height: 0.3mm Supports: no Perimeters: 2 Scale factors: ±100.6% for PETG was perfect fit, In my case
This mount I made to hold my Husky flashlight in place on a multiboard rack. Print vertically for layer strength in the portion that flexes and holds the flashlight.
This stand is suitable for holding the following Manicurist Green Flash nail polish products : 1x Green Flash nail polish remover bottle “dissolvant doux” 1x Cuticle softener bottle “émollient efficace” 1x Green Flash nail polish base…
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
The holder can hold a little over 48 Bamboo Flash Cards. The design is available in four variants with and without HoneyComb pattern and with and without pen holder. I printed everything in 0.3 mm layer height with support for all of the…
The flashlight hole is 1.5" in diameter and about 3" deep. I will take requests for spacers/collars to make different lights fit better.
Bezproblémový tisk. Hassle-free printing.
My wife makes a jewelry and some time she use an UV-Flashlight for resin. I just print for her a reflector for the flashlight. Now she can put it on (over) the jewelry and live it for few minutes washout UV light shine around and her…
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional This model is a simplistic flashlight that can be added to a keychain. A CR2032…
This little piece slides into the flash socket on the Sony A6000 or A6500 cameras to hold the flash so it points up as shown in the photo. This allows the flash to bounce off the ceiling instead of hitting the subject directly. A bounced…
I was attempting to design a simple flashlight using conductive filament with the goal of being entirely printed (just add batteries and bulb) with a single extruder 3d printer. After several iterations with limited success ( see here ) I…
Add on to attach a speedlight to a Lighting Stand, like Manfrotto I made 2 versions, one sigle/vertical, double with vertical and horizontal hot shoe attachment. To secure it to the lighting stand, an M4 bolt is necessary. You can print…
Do you love 3D Printy's bobbleheads or one of the many models that use his baseplates and springs ? Do you lament your inability to mount one of these fantastic bobbleheads to your camera? Well this is the print for you! OpenSCAD OpenSCAD…
it is used to attract fish by throwing it into the water, it will flow while reflecting light which creates flashes imitating an injured fish or other. It is mainly used to attract predators. It must be covered with aluminum or adhesive…
Holder for using colored gels for the system flash Metz 52 AF-1. Print it with 15% infill No Support
Update: Success! Feel free to continue below for perspective on this project, but there is now a working model on Printables here . I was attempting to design a simple flashlight using conductive filament with the goal of being entirely…
The original Xiaomi Beebest F1 can't use 18650 lithum rechargable battery due to short height because the spring and casing limited. So I designed this one to make extra room which helped the beebest f1 being able to use 18650-22650…
These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…
A practical diffuser for an excellent EDC flashlight, Nicron model N7 . What is special about this flashlight? High quality, versatility and practical design. Designed for a single AA (14500) battery of any kind: lithium-ion, alkaline,…
A larger fan might be powerful enough but still more silent than the original case fan. It hold to the main board case via some magnets.
The holder can store a little bit over 48 erasable flashcards from Bambook and the original pen.
Light quality (a relaxing color temperature and high color rendering) is very important for my mood and well-being. This project turns a flashlight and a cheap (USD $1) paper lantern into a beautiful room light that is easy to travel…
A simple case for the Joey GG cart flasher. Print both top and base parts large flat surface down no supports required. Qty 2, M3x15mm (or 10mm) screws required to hold the case together. Qty 4 rubber stick on feet (optional) - I always…
Just a small Super Deformed Flash my style that I printed for my kids
So its a desktop holder for the GB Flash by LesserCuma and GeekSimon, it was printed with the Creality Ender 3 V2 and PLA plastic. Made for 2.5cm thick desktop.
This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…
I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…
A simple and effective poop chute / ramp and bucket solution for the Flashforge AD5X as seen in my review video here: There are two files in this listing - the first is a 3MF configured for the Bambu Lab A1 and if you use the drop down to…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Batman Flashpoint Inspired Mask Enjoy Category: 3D Printing
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
I am attaching the STEP file for possible modifications. It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed. Just clips in to existing spindle hex hole at the end. Print Settings: Nozzle Temperature: 220°C…
This design can be printed using one of the AD5X feature - Multi-Color Printing.
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.
A Flashforge AD5X tool insert to fit into the Flashforge Adventurer 5M Toolkit .
This is printable enclosure for Flashforge AD5X, this model is made by Flashforge. Flashforge will soon releas
Designed for users who want printer waste to drop to the left side of the printer instead of behind it. Installs into the standard mounting using the existing bolts on the rear cover.
This custom FlashForge AD5X enclosure features a clean, functional design finished in Galaxy Black, accented with Green Silk Matte inlays for subtle contrast and depth. The build focuses on durability and visual balance while keeping a…
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…
Wanted a larger bin to hold filament waste. Painted a few spaced support strips on the underside of the raised bottom part (.mf); otherwise very simple print
This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
Anti Vibration feet for Flashforge Adventurer 5m. The rear feet sit at a 45 degree angle to be able to fit. These make the printer feel and sound a lot more solid and help reduce vibrations tremendously. I'm not sure if it is necessary…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
I bought this HysiPrui PEI build plate from Amazon for my AD5M and wanted to print the handle part. I found that the build plate was added to OrcaSlicer by FlashForge. Source:…
Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…
REUPLOAD from official Flashforge Wiki! All Rights at Flashforge! The Files for the official AD5X Enclosure as 3mf File. Print at 0,4 Nozzle , 0,2 layer, min 15% infill and PLA. Works and looks great.
The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…
Box for nozzle set AD5X optinal pause in print to add 4 x 8mm magnets
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Recommend using PETG or better and at least 10% infill Hardware needed: 2 M3x16 for filament sensor 1 M4x8 2 M3x6 2 M3 brass inserts Working on some mods to the Adventurer 5M follow me for more updates :D
This is my poop chute design for the AD5X so you can still have access to the power cable and lan connection. I printed the slide standing up with tree supports on build plate only. The basket i printed with normal supports on build plate…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Use tree supports only in green area (see photos). Print with something heat-resistant (abs, abs-gf, petg-cf, etc). Self-tapping screws for fan mount. Holes for 5x3 magnets.
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
A bust i did in Zbrush, just for fun. STL Files are aligned as how i printed them. Please use support, but you won´t need much infill. 5-10 % should be enough.
This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
