Search results: gen3

Sort order

201 models

P
PrintablesRoland

AppleTV 4K Gen3 remote holder

Description: This holder is for storing your apple tv remote securely in a drawer or on a wall. You can also print it with glow filament. That way, you can put the remote control away in the bedroom, even in the dark. Recommended print…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
8
Rating
5

NexGen3D: DIY Steam Machine Powered By Bazzite

Please Note: This Design is not being developed or maintained, and is now obsolete, please go for either the REDUX or the PRO DIY Steam Machine: REDUX DIY Steam Machine: PRO If anyone would like to support me and my work, please feel free…

Downloads
4,424
Likes
392
Rating
4.95

NexGen3D: DIY Steam Machine - REDUX Edition

Update: 27/10/2026 I have uploaded the version 4.2.3 face plates and the button bodies with the leaf spring system, I recommend printing the button body from a 60 to 70D TPU, if you have multi material system you can print the main part…

Downloads
2,752
Likes
260
Rating
5
P
PrintablesRagingRoosevelt

Extension Cord Storage from Sunlu Filament Spool (Gen2 & Gen3)

Gen3 Compatibility (update: Oct 20, 2025) Working with @JoshuaFowler_3228464, I was able to add support for Gen3 spools. Gen2 Compatibility It sounds like there's some Sunlu spools that this doesn't work with. The most recent Sunlu spool…

Downloads
1,498
Likes
1,217
Rating
5

NexGen3D: DIY Steam Machine Pro - Liquid Cooled BC-250

Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…

Downloads
1,177
Likes
121
Rating
5

NexGen3D: AIO Mount for the BC-250

Update: 04/07/2026 Version 2 incoming, please hold off on printing this, the new one is better, I will be uploaded soon, I'm just short on time, but Ill try and get it up before the end of the weekend. Update: 27-03-2026 Ive added a…

Downloads
1,094
Likes
83
Rating
5

NexGen3D: Lenovo Legion Go (LeGo) CyberDeck Mod

If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…

Downloads
1,050
Likes
128
Rating
5
P
Printablesdennisdjp

Starlink gen3 Standard Kit Pole 28mm mount

Printed 3D pole mount to mount the Starlink V3 dish to a 28mm pole. Can also be used on a light/speaker stand, like this one: https://www.thomann.de/nl/stairville_bls315_pro_lighting_stand_b.htm Settings I used for printing on Creality K1…

Downloads
972
Likes
80
Rating
5

NexGen3D: Lenovo Legion Go Audio Enhancement Protective Case

Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…

Downloads
903
Likes
69
Rating
5
P
PrintablesRob

Starlink Gen3 mounting bracket

Mounting bracket to allow current Gen 3 dish connect to a pole mount. Roof Rack mount and connecting pole also included.

Downloads
830
Likes
72
Rating
5
P
PrintablesRandy Ubillos

StarLink gen3 Router and Power Supply Brackets

These are brackets for the gen3 StarLink router and power supply. We used them for an install in one of the lower compartments in our RV. The openings on either side of the power supply bracket are for tucking the excess cables into.

Downloads
801
Likes
63
Rating
4.67

NexGen3D: DIY Steam Machine PRO-V2 - Liquid Cooled BC-250

///////////////////////////////////////////////////////////////// Update: 2/10/2026 Uploaded files for the Thermalright 6.86" LCD Display Link to the product: https://link.amazon/B0j0CNDgn Link to the software setup for Bazzite:…

Downloads
793
Likes
158
Rating
5

NexGen3D: Meshtastic ATAK Heltec T114 Case V2

18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…

Downloads
780
Likes
134
Rating
5

NexGen3D: Creality K1C Camera Fix

If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d The Creality K1C is not a bad printer, and so far has been a pretty reliable work horse for the money, but…

Downloads
747
Likes
207
Rating
5
P
PrintablesFlancisco

Shelly EM Gen3 35mm DIN rail mount

DIN Mount for Shelly EM Gen3

Downloads
713
Likes
29
Rating
5
P
PrintablesCaprii

Bottom Plate for Magpul PMAG Gen3

Hey Everyone, Couldn't find a Ranger-Styled bottom plate for my PMAG gen3 so i made one. Fits the .223 PMAG perfectly as FDM or SLA print. Print it standing, so the sides where it connects with the mag are extra strong. I recommend resin…

Downloads
651
Likes
75
Rating
5

NexGen3D: Chamber Heater

Im proud to release the version 1 of my universal chamber heater, the control system and power setup will be up to you, I will add these details later on the next version. BOM: 1 x 24v 7530 Dual Ball Bearing GDStime Blower Fan…

Downloads
622
Likes
314
Rating
5

NexGen3D: Micro Rack System - Micro Home Lab

If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d 24/10/2025 I have had a few requests for a tray to suit a Raspberry Pi, the below image is what I have been working on,…

Downloads
619
Likes
388
Rating
4.8

NexGen3D: Micro-Fit BMI Retainer for the BC-250

I made this specific for the BC250 Micro-Fit connectors, as there was no way to lock them into place, and this also stops you from mixing them up, so you can connect all 6 pins on each without worry about crossing them over. I made this…

Downloads
441
Likes
41
Rating
5
P
PrintablesGerald Hamster

Tacoma Gen3 Center Console Organizer

Print it upside down so you don’t need any supports, I just kept it right side up for the picture. I printed it in Pa6-CF at 20% gyroid infill. I didn't do PLA because I have heard that PLA melts and warps in hot vehicles overtime. About…

Downloads
417
Likes
59
Rating
4.75

NexGen3D: Version 2 AIO Mount for the BC-250

///////////////////////////////////////////////////////////////// Update: 11/8/2026: I have created an assembly guide for this mount here: https://github.com/NexGen-3D-Printing/SteamMachine/discussions/72 If you have any questions, you…

Downloads
410
Likes
34
Rating
5
P
Printablesdwcrews

Starlink Gen3 Pole Mount

This is a remix that allows the mount to fit the Harbor Freight collapsable flag pole. I used the non-commercial version of Fusion to re-mix the product.

Downloads
384
Likes
29
Rating
5
P
PrintablesRandy Ubillos

StarLink gen3 Dishy RV Bracket

We recently added StarLink to our RV. This is a set of models for mounting the gen3 “standard” flat panel to the back of a storage bay door. The bracket is printed in 4 parts which fit together. The “Right Upper” piece has an “Arrow”…

Downloads
382
Likes
75
Rating
5

NexGen3D: Meshtastic ATAK BaseStation Pro - Heltec V3

Update 11/10/2024: I will be uploading an updated version of this model this weekend (After I fully test everything), I have a new rear battery cover with a built in power switch, as the soft off for the V3 still chews power, and I have…

Downloads
378
Likes
133
Rating
5
P
PrintablesMoss Ed

Starlink Gen3 Router Bracket

Bracket for mounting a Starlink Gen 3 router

Downloads
361
Likes
30
Rating
0
P
PrintablesYebemeto

Glock 19 gen3 'less' extended magazine release

Its less extended then OEM glock extended magazine release

Downloads
360
Likes
16
Rating
0
P
PrintablesJuli15

Shelly 1 mini Gen3 / 1PM mini / Plus PM mini DIN rail mount with wago 221

Shelly 1 Mini Gen 3 / Shelly 1PM Mini / Shelly Plus PM mini DIN rail holder, in combination with two wago 221 3 pole clamps or one 3 pole one 2 pole wago 221 clamp. The grip is pretty tight and may require some force to insert the Wago…

Downloads
307
Likes
21
Rating
5
P
Printablesarm00700th

WE G17 gen3 slide g17 step file *AIRSOFT*

airsoft purpose only im just convert to step file original file dont have step file 9x19 9 are missing form glitch i wont add that after convert hope yall can make anything cool with it :D

Downloads
280
Likes
20
Rating
0
P
Printablesnnicclaas

Hochul Magazine Extensions Gen3 PMAG

These Extensions are remixes of the Hochul-mags Extensions, designed for areas, where you are limited to 10 round magazines, but want the better ergonomics of a standart capacity magazines. for Print settings, please consult the Hochul…

Downloads
268
Likes
17
Rating
5
P
PrintablesZachar Čuřík

Box organiser for Systainer Gen3 - Suitcase M 112

Four boxes as an insert organizer for the Systaner³ SYS3 M 112 suitcase. Model info: Variant A and Variant B are available, refer picture. (Note: box 1 and box 2 are the same for both variants (A, B)) Print settings: 🖨⚙ Material: PLA…

Downloads
267
Likes
50
Rating
0

NexGen3D: Modern Style Under Desk Draw V2

New version of my modern style draw. Changes: Now comes in 1, 2 or 3 stack. All mounts have a dovetail style key for easy alignment. Front bezel is now a seperate part, this is handy if you want to make the drawer black and the front…

Downloads
263
Likes
65
Rating
5
P
PrintablesBasementLAB

Shelly 1 Mini Gen3 DIN-Rail Holder - Mount Bracket - Supporto per barra DIN

Shelly 1 Mini Gen3 DIN-Rail Holder - Mount Bracket - Supporto per barra DIN Suitable for: DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 https://www.printables.com/model/885933-desktop-din-rail-stand-7590-degrees-supporto-barra Update:…

Downloads
252
Likes
25
Rating
5
P
Printablesde_baich

Shelly plus + Add-On mount (1PM/2PM/dimmer/i4/gen3)

First of all I want to thank @ Nelovy_08 for the model he provided. I remixed the model since I needed a bracket to hold a shelly plus 1 PM - 2 PM, also gen3, dimmer, i4 (and other shellys with the same shape) with the “plus Add-On”. The…

Downloads
246
Likes
11
Rating
5
P
PrintablesAntoni

Starlink Standard gen3 Pole Mount 60mm

Modified mount for Starlink, adapted for mounting on 60mm lighting poles. I printed it in ASA material, but PETG should also be enough.

Downloads
230
Likes
11
Rating
0

NexGen3D: Meshtastic ATAK Heltec T114 Case

New version of this here: https://www.printables.com/model/1017019-nexgen3d-meshtastic-atak-heltec-t114-case-v2 Note: I have ordered in some Beofeng clips, so when they arrive I will redesign the back cover to support them, so if your…

Downloads
220
Likes
43
Rating
0
P
PrintablesFH

Shelly Housing (1/1PM Gen3)

Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…

Downloads
207
Likes
103
Rating
0

NexGen3D: Artic Freezer III AIO Hose Comb

Simple AIO hose management clip, I designed this to suit the Artic Freezer III but should be fine with others. I designed it to suit 13mm hosing as the Freezer has wires and nylon braiding over the 10mm hose, so I need them to have loose…

Downloads
199
Likes
22
Rating
5

NexGen3D: Creality K1/K1C Lid Riser Version 2

27/09/2025: Had some clearance issues with the DXC extruder, so I made some slight tweaks and reuploaded the riser, the previous one is fine if you run the stock extruder. 26/09/2025: New and improved version of my K1/K1C Lid riser, I…

Downloads
192
Likes
25
Rating
0
P
PrintablesHayvosh

XC70 V70 Volvo Gen3 CD-Slot mount

Made a remix that would fit a general mount with screwholes so you could mount various other things like Brodit accessories or alike in the CD slot that's not used anyways. It sits flush with the stereo unit so do not use too long screws…

Downloads
186
Likes
21
Rating
0

NexGen3D: Buck Converter Case - LM2596S

Just a simple buck converter case, has cable tie points, max size is 6mm x 2mm, requires 4 x M3x6mm SHS or BHS. Buck converter is the LM2596S. Thank you to LxL3D for the use of the LM2596S Dummy model, which I used to make this case,…

Downloads
186
Likes
28
Rating
5
P
PrintablesK2_Kevin

EchoDot GEN3 Honeycomb Wall Mount

EchoDot GEN3 Holder remixed for Honeycomb Wall / Hex Plug ❤ Get your Prusameters… Post your Makes! ❤ Remixed from: https://www.printables.com/model/287966-echo-dot-3-3rd-gen-wall-mount

Downloads
185
Likes
68
Rating
5
P
PrintablesLode

Lenovo TAB M10 Gen3 wallmount

This is a small project so you can mount your tablet to a wall. I had to print it in two parts because it doesn't fit on the print bed of my MK4. It's designed to route the cable through the wall. The cable i used you can find here.…

Downloads
179
Likes
9
Rating
0
P
PrintablesYugi

AirPods gen3 skadis holder

Remixed the model by ronny so the airpods gen3 can fit. Made two versions - one depper and one shallow.

Downloads
169
Likes
19
Rating
4.33

NexGen3D: Chamber Heater V2

Revised version of my 3D Printer Chamber Heater: With my ongoing work on my NXG-3D3 printer, I wanted to add my chamber heater system, so I thought I would clean it up and make some changes to the original . This one does not require any…

Downloads
164
Likes
59
Rating
0
P
PrintablesBasementLAB

Shelly 1 Mini Gen3 Reference Model

Shelly 1 Mini Gen3 Reference Model Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed this file, please leave a…

Downloads
163
Likes
14
Rating
0
P
PrintablesDubSuplex

starlink gen3 pole adapter 43 to 38 mm

An adapter for 38 mm poles for starlink gen3 pole mount, specifically, 43 mm solid mount , so you can use Biltema antenna pole ( Art. 24-070 Antenna pole, 1.5 m - Biltema.no )…

Downloads
163
Likes
18
Rating
0

NexGen3D: Creality K2 - K2 Pro - K2 Plus Extruder Couple Fix

After buying K2 Pro and finding out that there is a ridiculous amount of stress placed on the stock couple being applied by the filament buffer and the CFS, I decided to fix the problem properly. I found someone had already started this…

Downloads
157
Likes
39
Rating
0
P
PrintablesKP design

Apple tv mount gen3

Apple tv mount gen3. Prints up side down. No need for supports. 15% infill, less should also do it.

Downloads
155
Likes
16
Rating
0

NexGen3D: 120mm and 140mm PC Fan Cable Cover

Simple stylish cover to hide cables on your 120mm fans inside your PC. Simple, print and install… I just use some support for the counter sunk holes, I print with the side that shows, facing down to get that nice PEI texture finish.

Downloads
154
Likes
36
Rating
0

NexGen3D: Mountain Bike Roller Based Chain Tensioner and Guide

Bicycle chain tensioner and guide, helps to reduce chain bouncing on mountain bikes when hitting rough terrain. Upper part needs to be printed from TPUI, lower half and pulley should be printed from PETG-CF or ABS, in my case I used…

Downloads
150
Likes
16
Rating
0
P
PrintablesRandy Ubillos

StarLink gen3 RV Dishy Ladder Mount

This project consists of two brackets and an adapter. It uses the StarLink Pipe Adapter and this telescopic extension pole that I got from Amazon. The brackets are designed to fit around a ladder with 1" vertical tubes. It's a very tight…

Downloads
147
Likes
25
Rating
5
P
Printablespol

starlink mount gen3 rectangular

I made this adapter to mount the stalink rectangular antenna to an inexpensive and super stiff M3/4'' THREADED GALVANIZED IRON PIPE This pipe is used for gas and water and is easy to find in Italy and europe. the iron pipe that I used is…

Downloads
144
Likes
20
Rating
5
P
Printablestactical_snacks

Ring Stick Up Cam (Gen3) Screw Mount

Designed this mount to fit the ring stick up camera in a very tight spot, specifically with the base rotated 180° and tilted back as far as possible. i like the easy removal of Akardia 's glue mount design but prefer screw mounting. fits…

Downloads
141
Likes
18
Rating
0
P
PrintablesChewza

Lenovo M90q Gen3 ConnectX-4 LX (Dell CX4121C) Dual 25G Baffle

Needed to create a baffle for the widely available and inexpensive Dell branded Mellanox ConnectX-4 LX cards that are slightly different in layout than other half height versions I've seen. The card is very secure once the baffle is…

Downloads
139
Likes
13
Rating
0

NexGen3D: Home Assistant Control Panel - Surface Pro Wall Mount

Please Note: This needs a printer with a 300mm x 220mm build area minimum, I designed it to take advatage of the K1 Max printer. Simple wall mounting system for the Surface Pro Tablet. I have tested this with the following tablets:…

Downloads
138
Likes
25
Rating
5
P
Printablessid.dagivers

Specialized Turbo Levo gen3 Rockguard v2

Specialized TurboLevo 3 Rockguard. Mine is broken again. Testprint in PLA. For me it fits perfectly. Updated to new version adjust holes to size of your screw inserts - print only those parts first to test priint 0.15mm layer for better…

Downloads
137
Likes
6
Rating
0
P
PrintablesSilvo brunčič

Mounting hole covers cfmoto gen3 gen2

I was tired of having mud in the mounting holes after every ride. So I created a cover that just plugs into the holes. Print so that the top of the model touches the bed. PEI bed is best as it has a texture similar to a luggage board.

Downloads
134
Likes
11
Rating
0
P
PrintablesBOFH 1337

Apple TV 4K Gen3 VESA Mount Adapters

VESA Mount Adapters for Apple TV 4K Gen3 with different heights.

Downloads
132
Likes
17
Rating
0
P
PrintablesBen Friesen

Custom integrated 10mm spacer for Supersix Evo Gen3 and Bontrager RSL bar

Designed around using an internal structural carbon spacer, this is simply an aesthetic shroud to visually integrate the bar and frame. Intended to use a carbon spacer with an outer diameter of 31.2mm. This outer shroud is intended to be…

Downloads
114
Likes
2
Rating
0
P
PrintablesRob

Starlink Dishy Gen3, riser feet

Riser feet for the new Starlink Dishy gen3, keeps the dish from actually being on the ground

Downloads
112
Likes
30
Rating
0
P

Stock Honeywell turbo Jetta GLI VW Beetle Ea888 gen3 CPPA/CPLA

3d scan of the honeywell turbo that comes factory on the 2013.5-2015 volkswagen CPPA/CPLA engine

Downloads
111
Likes
7
Rating
5
P
PrintablesPatrick

AirTag holder for AirPods Gen3

A remix of spectre3ooo's AirTag holder for AirPods Pro and fist gen AirPods. This one fits the 3rd Gen case. Print in TPU

Downloads
107
Likes
12
Rating
0
P
PrintablesRob K

GM LS Engine Gen3 Wire Cover for the ECU

When doing a swap harness for an LS engine there is a mess of wires if you don't want to use the stock covers. This allows the cover to be easily installed and removed for later troubleshooting. Small loops are for zip ties to secure the…

Downloads
106
Likes
17
Rating
0
P
PrintablesLuJaWi

Mitsubishi Montero/Pajero/Shogun Gen3 Switch Plate

Replacement Switch Plate cover. Designed to fit Gen 3 Mitsubishi Montero (2003-2006), but will likely fit other models. There's a blank version and a version with room for a toggle switch in case you'd like to add one. I've only tested…

Downloads
102
Likes
8
Rating
0
P
PrintablesTj Barr

Gamo Swarm Viper 10X GEN3i Pellet Mag Holder

Can be mounted on either side of the scope mount. May need a little tweeking for your printer. This was done on a Tevo Tornado with a BTT board.

Downloads
102
Likes
9
Rating
0
P
PrintablesmoWerk

Lenovo E15 Gen3 - Left ISO shift key cap

The make on the photo is printed using a 0.2mm nozzle at 0.08mm layer height. The clips have been reworked using a 0.5mm drill bit.

Downloads
99
Likes
13
Rating
0

NexGen3D: Bose TV Speaker and Soundbar Wall Mount

Just a simple bracket for mounting the common Bose TV Speaker to the wall, the bracket has a 5 degrees angle to direct the soundbar slightly downwards. The model this is designed for: Bose TV Speaker Print on its side for maximum…

Downloads
93
Likes
11
Rating
0

NexGen3D: HYTE Y70 VRM Fan Duct

Simple fan duct for assisted VRM cooling designed with the HYTE theme, designed for the Y70 case but should fit many others, bolt pattern matches a 140mm fan, and is designed to fit over a 120mm fan. Requires 4 x brass threaded heat…

Downloads
92
Likes
19
Rating
0

NexGen3D: 120mm Activated Carbon Filter System

Please Note: Fan should be installed to pull air through the filter and exhaust out towards the back, this gives you the max performance of both the fan and the filter, and will stop crap from building up on the fans. Update: I have…

Downloads
88
Likes
15
Rating
0
P
PrintablesRvdH

shelly 1PM gen3 Fusion 360 Model

Fusion 360 Model, ohne Innenleben

Downloads
86
Likes
13
Rating
0
P
PrintablesTheMicke

FireTV Gen3 Remote Cover

If you have a Cover that always falls off your Remote, then this might be a solution for you

Downloads
86
Likes
14
Rating
5
P
PrintablesArtificalSUN

Hyundai Tucson (Gen3) EPB Switch Fix

EPB switch design on Gen3 Hyundai Tucson is questionable at best, so the latches that hold the actual switch are qute weak and tend to break. This (reverse engineered) design allows one to atempt a fix of the switch instead of buying a…

Downloads
84
Likes
7
Rating
5
P
PrintablesJan-E.de

Housing for Shelly PM mini Gen3 and Clamps

This is my take on a housing for the Shelly PM mini Gen3 (and probably the other members of the “mini” series as well). I know there are other designs available, but I did not find one that fit all of my requirements. This housing…

Downloads
84
Likes
13
Rating
5
P
Printablesskroob

Shelly Mini gen3 case

Deutsch: Kleines Gehäuse um ein Shelly mini gen 3 als schaltbare Kabelverlängerung zu nutzen. Vorsicht Hochspannung, 230 V = Lebensgefahr! English: Small case to use a shelly mini gen 3 as a switchable cable extension. Caution, 230 V =…

Downloads
80
Likes
8
Rating
0
P
PrintablesTimää

Shelly 1PM mini Gen3 Case

Shelly 1PM mini Gen3 Case i use to remotely turn on and off my Bambu Lab A1 mini. Used Hardware: 4 M3 Inserts (Size: M2.5xL3xOD3.5) - ( M2 M2.5 M3 M4 M5 M6 Brass Insert Nut Hot Melt Heat Knurled Embed Injection Copper Insertnut 3D Print…

Downloads
78
Likes
13
Rating
0

Ikea Vappeby gen3 front panel

Front for the IKEA Vappeby gen 3. The hexagons are as a seperate component so it can be printed with different colours. Its a bit delicat to get of the bulid plate, but I didn't want too much material in front of the speakers.

Downloads
76
Likes
6
Rating
0
P
PrintablesKoosh

Magpul Gen3 40rd Magazine Block

Print the part and insert it inside of the spring and place the factory base lock under it. You can trim the top if nesscesary. I have this one for 10 rounds.

Downloads
76
Likes
11
Rating
0
P
Printablessnrkl

DIN Rail mount for a Shelly EM Gen3

I wanted a DIN rail mount for a Shelly EM Gen3 - while there were GEN3 mounts, many didn't fit correctly. I liked the compliant mechanism in one, but it did not fit the CT connections that the EM has. I liked the simple DIN clip…

Downloads
75
Likes
8
Rating
0
P
PrintablesWolfRS

NexGen3D's CyperDeck Mod for Lenovo Legion Go with SSD Mod Support

Took the Cyberdeck Mod from @NexGen3D and modified it to fit my ssd back cover mod from Arcanazen Thanks to both!!

Downloads
73
Likes
14
Rating
0
P
PrintablesMB3D

Echo Show 8 Gen3 faceplate

This is a printable plate that slides onto your Gen3 Amazon echo show 8. allowing you to dress it up in any color you like. Other sizes and generations coming soon

Downloads
72
Likes
14
Rating
0

NexGen3D: HYTE Y70 Fan and Radiator Cover

Simple trim to cover/hide your fans and radiator in for the Hyte Y70 PC case, can be used in other cases, but I specifically designed it to fit Hytes theme. There is two types: Type 1: This is for a push pull system with fan + rad + fan…

Downloads
72
Likes
15
Rating
0
P
PrintablesHans Schulz

Lenovo P1 Gen3 vertical stand

A vertical laptop stand for the Lenovo P1 Gen3

Downloads
70
Likes
7
Rating
5

NexGen3D: NXG-Node - Auto Rewind Filament Dry Box

I’m proud to finally release my NXG-Node to the 3D Printing Community. I originally intended to make these and sell them, but due to other forces in my life, I have decided to just release the files and let others make and enjoy this…

Downloads
69
Likes
29
Rating
0
P
PrintablesJohn

Socket Lockring Chainring Bosch e-bike motor gen3

I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.

Downloads
67
Likes
7
Rating
0
P
PrintablesTomas V.

Drzak pro Starlink GEN3 - Flat mount

Drzak anteny Starlink GEN3 na vuz. Mozne pouziti na automobily, karavany, obytna auta, lode, atd. Drzak lze bud nalepit primo na karoserii, nebo prichytit pomoci magnetu KRP-57-G, ktere se prisroubuji sroubem M5 do matice M5 ( doporucuji…

Downloads
64
Likes
4
Rating
0
P
PrintablesFischje

Shelly 1 Mini Gen3 Hutschienenhalter

Ein einfacher Hutschienenadapter für 3 Shelly 1 Mini Gen 3 (passt auch für Shelly PM Mini z.B.) mit Kabelbinder halten

Downloads
64
Likes
2
Rating
0
P
Printablesdzxxx2331s

Creality Ender 3/Pro Static ABL Probe Mount by ideagen3D

Update: Added a newer version to mount the probe lower. Probe wasn't long enough in the default version to function. Most users should use this new ("Low") version. Mount for 8 and 12 mm diameter static ABL probes (capacitive & inductive)…

Downloads
63
Likes
1
Rating
0

NexGen3D: Magnetic Dock for the T114 ATAK Mobile Case

New version of this here: https://www.printables.com/model/1017019-nexgen3d-meshtastic-atak-heltec-t114-case-v2 I made this magnetic dock to suit this case:…

Downloads
61
Likes
25
Rating
0
P
PrintablesRvdH

Gehäuse für shelly EM mini Gen3

Die Wagoklemmen und der Shelly können in die Halterung eingeschoben werden. Die Bohrung für die Kabelduchführung beträgt 9 mm, das Kabel kann mit einem Kabelbinder gesichert werden. 70 mm Leiterlänge sind ausreichen, um alle Anschlüsse zu…

Downloads
61
Likes
15
Rating
0
P
PrintablesMikeTheSuperDad

NexGen3D: DIY Steam Machine PRO-V2 - 256x256 Split Remix (Bambu Lab / X1C)

This is a remix of the excellent NexGen3D: DIY Steam Machine PRO-V2 case. The original model requires a 300x300mm print bed, making it impossible to print as a single piece on printers like the Bambu Lab X1C. To solve this, I split the…

Downloads
59
Likes
4
Rating
0

NexGen3D: CleanAir Filter System MK2 with Magnetic Dock

This is my new CleanAir system, I've made several improvements over the previous version: Thicker lid and rail system Magnetic pogo pin system Multi stage filer system Cleaner style Various model fixes With this new design you can rapidly…

Downloads
58
Likes
28
Rating
0
P
PrintablesSpells

Pajero Gen3 MK3 2000-2006 speaker spacer and cup protector thingy

Pajero Gen3 Gen4? MK3 2000-2006 speaker spacer and cup protector thingy It was designed for Axton 16.5cm speakers. I thinned it a bit, and added the splash shield like the OEM part has and then some holes for wires and water weeps This…

Downloads
51
Likes
8
Rating
0
P
PrintablesRvdH

shelly EM mini gen3 Fusion 360 Model

Fusion 360 Model, ohne Innenleben

Downloads
51
Likes
11
Rating
0
P
Printablesdzxxx2331s

Sapphire Plus Mosquito Hotend Mount with ABL Support by ideagen3D

Remixed from R31L4ND's E3D V6 Hotend Mount for the Sapphire Plus to better support the Mosquito/Spider & clone hotends. The collar and BLTouch mount have not been changed - feel free to re-use R31L4ND's. BLTouch: define…

Downloads
51
Likes
6
Rating
0
P
PrintablesRG

Case for HomeBrew Gen3 PCB Telescope Controller

This is a case for Mark Lord's HomeBrew Gen 3 PCB used to control a telescope. You can get more information here: https://www.cloudynights.com/topic/854327-homebrew-gen3-pcb-wifibtgpsmusbrelay/page-9#entry12560909 I made the case opening…

Downloads
51
Likes
4
Rating
0

Volvo Gen3 CD-slot mount

A adapter to mount (in my case) a magsafe charger in the volvos cd-slot. The adapter part and mount part are screwed together with M2*3*3,3 heated thread inserts and M2*12mm screws. I then glued a magsafe charger (55mm diameter) onto the…

Downloads
50
Likes
5
Rating
0
P
PrintablesBeTurbo

Mainboard Case for Lenovo X1 Yoga Gen3

Bottom left case needs some support material for the connector. Power Button also requires a little support material. Bottom printed with PETG for better heat resistance. All other parts with PLA. PLA for bottom parts should be ok as…

Downloads
50
Likes
7
Rating
0
P
Printablesdzxxx2331s

Creality Ender 3 V2 Static ABL Probe Mount by ideagen3D

Mount for 8 & 12 mm diameter static ABL probes (capacitive & inductive) for the Creality Ender 3 V2. Requires 2x M2.5 or M3 bolts at least 5 mm long. If your probes came with washers, those may not fit, just exclude them from…

Downloads
50
Likes
7
Rating
0
P
PrintablesLS

Starlink Gen3 Corner Bumpers / Dish Protectors (TPU - No Support Needed)

Print this model in TPU (designed for flexible material) -- I printed with the below settings with great results: No supports enabled 3 top layers, 2 bottom layers, 2 wall loops 10% infill, cross hatch Print SLOW: 20-35mm absolute max The…

Downloads
49
Likes
4
Rating
0
P
Printablesdzxxx2331s

Filament Clip for ideagen3D ToughPLA

Clip for holding filaments in place to the spool when not in use. Designed for use with ideagen3D's ToughPLA spools, but should be compatible with most out there. Filament clips in easily and easy to remove as well Only takes ~7 mins to…

Downloads
49
Likes
6
Rating
4.5