17,515 models
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for PETGSource material: PET
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Simple 9Volt battery container suitable for the Gridfinity system by Voidstar lab. Works as intended. ‘’But hey, what is that gridfinity thing you are talking about?'' This is the masterpiece I am talking about:
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant
Screws labels with pictures of DIN912 screws
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
This holder can contain 8 individual cr2032 batteries. Printed on a Prusa Mini in Orange Prusa PLA (Not Prusament) Part of the Gridfinity storage solution. What is that you say?
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Holder for Ryobi drill bit collection compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill bit sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Print approx. €8.73–€10.67 excl. taxPreliminary estimate for one variant
Simple, no bells, no whistles watch stand with a base compatible with Zack Freedman's Gridfinity System . Fits in a 1x2 standard 42mm Gridfinity space. When configured for a 7.25" (18.5 cm) “wrist” it is roughly 42x84x84mm. No holes for…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Print approx. €4.81–€5.88 excl. taxPreliminary estimate for one variant
Holds 3 sizes of containers for sewing needles in a 1x1 gridfinity square. Fits 1 6.5mm, 3 5.5mm, and 1 3.5mm box of needles. Sizing is based off what we had in the house, if you need a different assortment or all of one size feel free to…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This caddy organizes my whole dremel collection with all different attachment requiring different gridfinity slot this caddy fits most of my dremel needs. This is model is by Zwierzak, Does a Thing on Thangs didn't see any good Dremel…
Print approx. €11.75–€14.37 excl. taxPreliminary estimate for one variant
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
These hooks snap on to the back of standard gridfinity bins, in heights 2u, 3u, 4u, 5u, 6u, 9u and 12u, with space for the stackable lip. Please note that the lip is required - it's the mechanism that allows the hook to grab the bin. They…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Made this in light of the original reason this system was created. to get rid of the cheap crappy containers you get your screws in! Paired with the screw sorter from the link below, you're bound to enjoy using this system….. even if you…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant
Gridfinity baseplate to hang to a Kupper (Küpper/Kuepper) pegboard (UE/EU/DE pegboard). Printed in PLA, it needs brim or adhesion disks under the pins (already present in the .3mf file). If you like it or you're having problems with it,…
Print approx. €2.44–€2.99 excl. taxPreliminary estimate for one variant
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely. Attached is a hand crafted…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.
Print approx. €13.63–€16.65 excl. taxPreliminary estimate for one variant
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant
A Gridfinity tool holder for an iFixit Kit.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
I purchased a new USGeneral (Harbor Freight) Series 3 42" toolbox (top and bottom). The top toolbox has wide drawers on the left, and narrow drawers on the right. This model is for a Gridfinity base that fits perfectly inside the narrow…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Used the model of the indicator from McMaster Carr. Fits quite well, makes me feel better about storing this precious tool. Ended up printing with 0.6mm given simplicity of model.
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
Changes I changed the overall width and length by 2 mm (1 mm each side) which makes it fit a lot better. I also removed a few mistakes that were made by adding the area around the original baseplate. And to make it even easier to screw…
Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant
A 1x6 gridfinity storage for Proxxon Micromot 60E Edit 2024-08-06: Uploaded correct version of the .3mf file
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
Store a Vaporesso using Gridfinity 1x1 Grid. Modified model to store two 10ml bottles of liquid on a Gridfinit here .
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
A gridfinity charger for your Sonicare Toothbrush.
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
I added spacers to a 4x5 Gridfinity Spacer to fit into a Bisley Style No Name Desk Cabinet with 23.5 x 38 cm drawers (inside Measure) You need two of those Grids to fill the drawer. My first model/remix so feedback is very welcome
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
It is gridfinity . Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice. 7 slots for chalk, just wide enough…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
A stackable 5x2 gridfinity storage for 3 inch sanding pads
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Box für 7 Holzbohrer von 3mm - 6mm im Gridfinity Design
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Gridfinity battery bins for CR2025-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 10 batteries. A 1x2x4 bin that fits 20 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Design Requirements A simple gridfinity container that holds reusable grocery bags Printing Setup Printed with PETG using a .4 mm nozzle and no supports First Impressions The bags fit Attribution ZackFreedman - Gridfinity gdie - Freecad…
Print approx. €9.99–€12.21 excl. taxPreliminary estimate for PETGSource material: PET
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant
Box for Dremel Versatip with accessories. I made some small changes after the first print, didn't print it after the changes. So if there some changes needed please tell me. (Fighting with fusion360 after every update they make) 12.11.25:…
Print approx. €12.59–€15.39 excl. taxPreliminary estimate for PETGSource material: PET
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
This is for those random things like the shown Black & Decker Bit Mini-Case. It is a 2 x 2 unit and has a height of 2 units.
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
This is a custom-designed lightweight Gridfinity baseplate optimized for the IKEA NORDEN table drawer. The set includes two baseplates per drawer, each featuring a 3x4 Gridfinity layout. These baseplates were built using the Autodesk…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Tool holder for each of my VEX team squads so that each squad working on a robot has the same tools and each tool has a home so that all tools get put back and nothing is left out or left on the tray/crate with the robot parts that are…
Print approx. €4.52–€5.53 excl. taxPreliminary estimate for one variant
Tried to create a more robust design of a 2x4 gridfinity bin. If you need other sizes, let me know! The Bin is 2x4 Squares with a maximum hight about 6cm. The base is created with the gridfinity fusion 360 plugin from…
Print approx. €4.20–€5.14 excl. taxPreliminary estimate for one variant
This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for one variant
A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Contains both a single and double holder with rooms for the clips. Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Print approx. €4.79–€5.85 excl. taxPreliminary estimate for one variant
This Gridfinity tray is for this 13-Piece NEIKO 10074A Metric Hex Bit Socket Set .
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Gridfinity setup 2x8. Holds a Pinecil, 6 tips, and soldiering accessories from this kit specifically: https://www.amazon.com/dp/B0BJ9FDS5F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant
designed to use M3 20-22mm screws and heat inserts.
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
A relatively simple spool holder here. It start as a solder holder, and then I've added the tape dispenser section to the top. It's 40mm from the centre of the spool to the baseplate. The spool axle holds in place nicely from my…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
A 3x4x4 gridfinity storage tray for eighteen Hex shanked HSS drill bits. Comprises of a tray and two, clip in, hinged, bit holders. The two bit holders are numbered to indicate drill bit diameters from 2mm to 10mm in 0.5mm steps. The tray…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
