Panasonic Holder(belt&HSW) for battery DMW-BLF19 Lumix GH5
Wydrukowałem pionowo z podporami
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
- Downloads
- 33
- Likes
- 5
- Rating
- 0
238 models
Wydrukowałem pionowo z podporami
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Gopro mount for Hubsan H501s Infill : 30% Support : Yes I use PLA i thing it is good with a ABS and PETG
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
The first model (bracket.stl) is an upload of this model : https://www.thingiverse.com/thing:5407780 The second one (bracket_mod.stl) is the modified version with a groove to insert the wires. No need to unsolder/solder the wires to…
Anschutz Match 54 Bolt Protector / Sleeve / Case Free version (printed with black PLA in pictures), without end-caps and additional improvements. Premium version (as printed green in pictures) with end-caps and some other small design…
My GPU was suffocating inside my H510 Elite, so I created a front and side panel for better airflow. Air filters coming soon.
Simple wall mount for a Govee H5179 sensor. Flat back with screw hole for a fastener or use with a command strip or some double sided tape.
Panasonic Lumix DC-GH5 Camera Cage Disclaimer: This was a one-of project. I printed all parts and assembled the cage including the camera. This resulted in a working prototype. However, there still might be some issues with the design.…
lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes 2024/10/8 update: revisiting the file because I need to print a set…
Here's my adaptation of Peter H's ball feet to the cheap copy Decathlon made of the Helinox chairs. The original robber feet sink in everything, but I still wanted to keep them on my chair. So, I made use of the hexagonal shape of the…
This is a dock that you can insert the original charger into so your watch is sat up rather than flopping around on the your surface. I printed mine in PETG 30% infill on a Vertex XL printer. It is a snug friction fit so that the charger…
A basic wall mount for the Govee 6-button remote. I added a model with holes for screws although that seems like overkill. The model printed fine with PLA and no brim or supports if oriented properly. This is my first design, just had a…
Just a basic simple charging stand for Galaxy Watch5 44mm and Pro models. Probably will fit older 44mm watches. Print bottom part with high infill for weight.
Ursprüngliche Idee war die mobile Stromversorgung meines TS101 Lötkolbens mittels 18V LXT-Maikta-Akkus, wovon ich mehrere besitze. Geendet ist das ganze dann in diesem Projekt. Ein mobiles Laborletzteil mit mehreren Spannungsausgängen und…
Since the new charging puck not only features USB-C instead of USB A plug, 10W instead of 5W (if connected to a PD capable USB-C charger) but also a smaller footprint / diameter, I had the choice to stuff some sort of thick glue tape…
Wall bracket to hang STIHL SH56 Blower. Attached to the wall with 4 screws. Reenforce with 1/4"-20 Thread Size, 2-3/4" Long Button Head Hex Drive Screw 1/4"-20 Thread Size, Hex Nut If you download and/or add this model to your…
Holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports adhesive for bonding plastic, I used Loctite 406 screew 4x M3x10 innox 2x UV stable binding strip 280x4,5 mm print 1x part A, 7x part B(B+), 1x part…
Basic domino. I printed With PLA.
Wallmount for Mercusys Halo H50G Mesh AP, airvented
Ich benötigte Platz in der Gartenhütte und habe die Makita Akkuheckenschere DUH523 am Dach der Hütte befestigt. / I needed space in my garden shed and attached the Makita battery hedge trimmer DUH523 under the roof. Durchsuche Onshape…
These models are not mine I just uploaded it to printables because I thought others might search for something like this. Notes from the creator: I use superglue to assemble ill add a picture so you can see where everything goes I use…
Double-sided crossing track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight…
Moved one of the included 120mm NZXT fans from the h510 case to the bottom. Designed this adapter so it can lock into the holes at the bottom of the interior. They pressure fit into place (for removal I recommend pushing from underneath…
This is a simple design for mounting your Govee H5126 “smart button switch.” So you can keep it in one place and move it when needed. I printed this on a Bambu Labs Carbon X1 printer with AMS. I used white Bambu PLA, Though, with the…
Not sure exactly how this idea came to my mind, but hexagons look cool and I thought why not design some that click into the front of my PC case! The designs and colors you can add to the front of your PC are limited only by your…
I like the original design by hopskipper but I only needed a case for 3 batteries . So I remixed it in Tinkercad and here it is. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Notes: Print…
Feet extension for NZXT H510 case. No specific print instructions required, i did mine at 100% and PETG for strength and heat resistance.
I buy this mobo the second hand but seller dont give me the io shield. I make this design on tinkercad. This design is very acceptable maybe dont perfect but enough for usage. Printer: Modded Ender 3 Neo
After my original wobbly Zoom case broke i needed a new one. This one fits perfect. top and botto, are simply hold together by joints with 25mm M3 screws. The Clamps are also installed with M3 screws. In the Inside you get some extra…
I had been lurking, waiting to see if someone would release a charging stand for the Casio G-Shock DW-H5600. Primarily I had been lurking due to lack of skill as opposed to laziness, but thankfully no-one came forward with such a model,…
This caddy should fit at least for the following Huawei Systems: RH2288H V3 RH2288 V3 RH5885H V3 RH5288 V3 To my knowledge there is currently only one type of LFF caddys huawei produces, so the should also work on other systems. For…
Since I see no one made these before, I uploaded this to help others. The side needed a little sanding on few pc case. Category: Computer
I remixed Kalcemo's Bambu X1C Chamber Hygrometer to hold a Govee Bluetooth Hygrometer Thermometer H5075 I had laying around. It's visible from the P1S camera for when I'm not within bluetooth distance. I printed this at 0.1mm layer height…
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
A small box for a multimeter that clips onto universal hooks like these https://www.printables.com/de/model/323748-skadi I've made it for my WH5000A (86mm wide, 40mm deep) but it should fit a lot of different models. Printed in PETG with…
Govee Hygrometer (H5075) Magnetic Mount (12x3mm Magnets) For mounting Bluetooth connected Hygrometer in printer, drybox, etc. H5075 keeps history so you can keep track of dry box humidity and temperatures over time. No support Press the…
The lower front case fan push air into the PSU shroud, this duct redirects it up into the GPU and the rest of the case. It also hides any cables in this section of the case. Can be loose or locked in with 2 screws regular 3mm PC screws.
Printing recommendations Print with 0.2mm or 0.3mm layer height and at least 3 walls and 4 or 5 top and bottom layers. I recommend at least 30% infill. After printing remove the slots support wall (integrated in the design) as shown in…
New Fortnite CH5 S2 croc charm
holder for wall mounting
I noticed that the PCIe slot cover on my NZXT H510 Flow PC Case did not sit flush with the case so I'm using this model instead. The .3mf file contains four variations of the cover. There is a solid cover and three patterned/mesh covers…
This is a wall mount bracket for the Govee H5075 thermometer. It uses two 3M medium command strips to attach to the wall. The strips are hidden behind the thermometer and the bracket has an opening to allow easy for removal of the strips.…
Mount your Govee H5075 Digital Hygrometer Thermometer onto the door of your Bambu Lab P1 Series or X1 Series printer to conveniently monitor the enclosure's temperature and humidity.
The original hygrometer and thermometer that comes with the Original Prusa Enclosure is hard to read in my room as I leave the lights off most of the time. I wanted to be able to create a mount that I can use the LED light from inside the…
It's apapter for holding NZXT Kraken cooling system for NZXT H510 PC case when You lost or broke original holder plate Printed without supports, 0,2mm layer height, PLA probably PET-G would be better for heat resistance
My version of a DPH5005 case. It is done in OpenScad so it is easily modified. All connections are in the front and rear panels.This has a 4 jack powerpole input on rear. The top two inputs are used as an on/standby. I use an old XBOX 12V…
Blade 330s main gear - BLH5337 replacement.
Designed a GPU bracket that attaches inside the NZXT h510. It locks in behind the cable cover. This is originally designed for the Aorus Master 3070ti, a very large GPU. Feel free to remix as needed.
Designed to hold your Samsung Soundbar remote, my remote is from my Samsung HW-Q700A, but it may work for others. The remote model is AH59-02767C for your reference. The remote fits very snug when printed at 100% scale, I'd suggest to try…
Print vertically, no supports needed.
I made this mount to hide the sensor and be a snug fit. I used a small piece of double sided tape.
Adjusted the BeamerMount-base.stl to fit Acer H5350 projector
Gaze not too long into the void, for you will inevitably think to yourself: “Man…I could fit another couple terabytes in there.” To remove the NZXT's front frame, you may have to use a pair of needlenose pliers to flatten the tabs on the…
Glove Box Latch for Mitsubishi Pajero Mini H56A This model was designed as a replacement for the original glove box latch, which commonly fails over time due to plastic fatigue. The part has been 3D printed, installed in the vehicle, and…
Feet support for bigger surface area for the QUECHUA MH500 chair. ( or potentially other chairs with a 22mm OD leg.) this model can be used with the original legs, no modification or removal needed on the chair itself. due tight…
Repair and Reuse with 3D Printing Bringing My old Bang & Olufsen Earphones Back to Life! In recent years, 3D printing technology has revolutionized how we approach repair and reuse of everyday objects. Personally, I had the opportunity to…
This is a cover to protect the built-in X/Y microphones of the Zoom H5Studio, and to separate mics from a dead cat. To put on your Zoom H5Studio, rotate 90 degrees and then slide into place. Then rotate back 90 degrees to fit like the…
To be installed on 58mm Adapter for DSC-H1, DSC-H2, DSC-H5 and other 2 aperture size available, 85mm and 90mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Generic…
Remote holder for Samsung Remote AH59-02692P mit oder ohne Locher zum Schrauben
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
Držák pro zavěšení na zeď plotostřihu DeWALT DCMPH566. Funkční doplněk pro pořádek v garáži. PLA výplň 35%
Eine kleine Halterung für die genannte Fernbedienung. Gedruckt mit 0,12mm Layerhöhe und 25% Infill. Past perfekt!
Mounting box for InnoMaker CAM-OV5647 I designed this box to use with the excellent mount by lab27 https://www.thingiverse.com/thing:3121052 and the 180 degree remix of the arm by inomad360 https://www.thingiverse.com/thing:4514535 This…
The original ZebraLight silicone mount that comes with their headlamps works, but not great. One of its biggest issue: It is hard to attach and remove the flashlight from the mount. It takes time. This is a customized version of my…
RaspberryPi case that looks like the NZXT H510. Use a small piece of plexiglass or clear plastic for the side panel. Compatible with some heat pipe with fan coolers out there. Use a 16mm Pushbutton switch for the power button.
I needed to fit my H5 Flow case into a lower height cabinet, so I modeled some shorter feet. They fit really well, snap into place and then you can screw them in. STL foot is 7 mm high. I included a F3D file, so you can very easily change…
Need a cheap and fast terminal cover for your batteries? This files is easy to print and works great! Note: You may have to print each cap slightly different sizes (about 1-4%) for each battery. At least with my batteries each one…
A case for Nucleo-H503RB, with opening for USB-C ports. 2 versions, one is shorter, exposing the top parts (pin headers), the other one is longer, covering the top parts. Should fit most USB-C cables. Only for Nucleo-H503RB and similar…
This is a remix of another adapter for the NZXT H510 that will make it easier to mount fans on the bottom of the case for better gpu airflow. In the remix I just duplicated it and merged 2 sides together so that you can fit 2 fans. One of…
The Govee H5198 thermometer works fine, but with 4 long probes and wires, it is not easy to put it away after I done using it. So I made this box to help hold the thermometer. There is cutout on the side allowing access to the button and…
This simple design secures to the nearby usb-a port by a dongle. Meant to prevent accidentally hitting the top-located, recessed power button on NZXT H510 cases. It also prevents cats or children from purposefully hitting it. The center…
Einen osVac Neo adapter für f40 Anschluss, auf einen Ht Rohr Schlauch mit Aussendurchmesser 51mm und Linksgewinde und einer Steigung von 6mm.
I've designed a simple support for the LG PH550G projector that holds it vertically at a 10º angle to the wall. It is used to project images at the ceiling, for watching movies in bed. The support is made of two parts linked by a T-joint.…
Replacement for a Mitsubishi Pajero Junior/Mini H56A/H57A Air Vent Knob. Mine broke so I decided to create these and print them in PETG.
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H53 or H503 mount snaps right into the Skilhunt HB3 headband! Works with H53 and H503 series headlamps. There's is a conformal design…
A replacement backplate for the intel DH57JG motherboard.
Created some custom mounting options for the Govee Life Smart Wifi Gateway H5110 system. Does not matter which end of the Govee sensor you place into the holder as the design leaves a small air space where the sensor takes in ambient air,…
Never let anyone else take your bottle by mistake. Especially useful when both your kids want the same exact bottle and then they can't agree who owns which. Or when they loose those bottles at school Sized to fit Decathlon 900 Ecozen ®…
A few years ago, one of the tweeter speakers from my Pioneer S-H510V speaker set died. I used this set of replacement speakers from Aliexpress: Aiyima 2Pcs 52Mm Audio Draagbare Luidsprekers 6 Ohm 30W Dome Zijde Film Tweeter Abs Hoge…
Printing PETG filament
After converting all the power tools in the woodworking shop to the Osvac Neo system, the main piece was missing: the suction part that goes from the Lavor Pro Em Worker vacuum cleaner to the Dust Commander. The Lavor's corrugated hose…
This case effectively protects the ear cups of the WH-CH520. The box is securely closed by the lid with the help of a small groove. Print settings: 3 Walls 3 Top 3 Bottom 15% Infill Gyroid I used black PETG from Jayo for the print.…
I printed them in PLA, 2 walls and 15% infill
This is a holder that is compatible with the Govee Bluetooth Thermometer Hygrometer (H5102). It positions the sensor at an angle, making the screen easier to read. There is an opening on top to access the button that changes the units…
Replacement Bracket for WH-CH500 (tested only for this model; might work for similar models) The Bracket folder contains files for the piece without the connected part. The Bracket Whole folder contains files for the piece with the…
Outer clip for the Sena headset mount on a motorcycle helmet. works with the SMH5-FM, I am not aware if other models have the same clip. The ruber from the old clip can be removed and placed within the printed model, The thread inserts…
My crossfeed gear key had been sheared off by the previous owner, and since everything is made of Zamak, there was no way to really repair it without silver brazing as solder would not stick and the original material melts at a very low…
A charging station for a Sena30k and a Sena SMH5 Just put 2 Micro USB cables inside. Ignore the Broken Antenna on the Sena30k
Fan Cover for 140mm NZXT H510 computer case. It has no functionality, I made this because I didn't like the original design from case. Use the original screws from the manufacturer.
The bar has the following Japanese proverb "Fall down 7 times stand up 8" embossed on the upper part. Printed it with brim and laying it down on its thin side, with organic supports. Added split parts for smaller printers
The arrows are for orientation, it goes on the inside of the case. Iron for a nicer look.
Printed in PLA, no supports. Designed for M3 screw/nut. Use a screw to pull the nut through into place.
Ersatzmundstück für den Beurer Inhalator IH50. Zu drucken in PETG da dies in der Spülmaschine gereinigt werden kann. Mundstück sitzt ein bisschen stramm trotz 0,4mm Spiel im Durchmesser. Perfekter Sitz kann durch schleifen oder anpassen…
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
You bought a BVM D14H5. It came with a 16:9 faceplate. Face palm. And there's almost no way to get a 4:3 faceplate nowadays. So, we print our own. I provided arranged pieces called "AIO" so you can print the same colored pieces in one…
This is a wall mount for NZXT H510 Elite, but I think it will fit other NZXT cases to. Mount is 215 mm wide. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.24 Infill: 40+ Filament: 3de PLA Max…
One of my friends crashed his drone and as a result one arm broke. So i designed two parts that support the two broken pieces of the drone. Its operational as before. One of my concerns was the additional weight of the printed parts so i…
The bottom and fence bracket are connected with a dovetail and use a single M4x20 countersink screw to secure the bottom to the bracket. No nut is needed since it will make its own threads. This will make a solid connection. Print the…