Search results: h7

Sort order

Counting matching models…

P
PrintablesPGe-10

TP-Link UH720 8040 extrusion mount for simrig - Remix

Changed to fit tp-link UH720 with charging ports on the side

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
6
Rating
0
P
PrintablesBoluge

Seiko NH3x / NH7x Hand Setting Tool Stand – Dust Cover Compatible

When assembling a dial and installing hands on a Seiko NH movement , minimizing movement handling can make the process easier and safer. This stand is designed to hold a hand setting tool for NH3x–NH7x movements while remaining compatible…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
7
Rating
0
P
PrintablesF Engineering

Replacement for Blum 174H7100E8 EXPANDO dowel

Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
5
Rating
0

Case for tp link model uh720 usb hub. Credit hangarmanagement.ca please

Well ventilated case for a usb hub that will be moved around for podcast purposes, Protective, light ans my velcro strip

Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
0
Rating
0
P
PrintablesAxnarc

Sony WH-CH720N Repair

This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…

Downloads
873
Likes
30
Rating
4
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Downloads
614
Likes
48
Rating
5
P
PrintablesMacbambi

Samsung Galaxy Watch 7 und Watch7 Ultra Hand Stand

Mittlerweile habe ich verstanden, wie zickig die Galaxy Watch im Gegensatz zur Apple Watch ist. Der Magnet im Ladepuck ist zu schwach, die Uhr richtig zu halten. Nach zig Jahren mit der AW eine Überraschung. Die Galaxy Watch 7 muss sehr…

Downloads
612
Likes
80
Rating
3.5
P
PrintablesMaCo_3dprinting

Sony WH-CH720N Left Hinge Repair piece

This was a briliant model of the hinge for the Sony WH-CH720N, but it was only a model of the right hinge so I just mirrored the model to make a left one as well. Kudos to the maker of the original model please go like and download his…

Downloads
442
Likes
13
Rating
5
P
Printablesliqwid

Power Supply and Controller Wall Mounts for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C

The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.…

Downloads
405
Likes
19
Rating
5
P
PrintablesGawper5

H4 and H7 socket

Recomended PETG because some light bulbs may produce more heat and maybe warp the PLA part.

Downloads
372
Likes
21
Rating
5
P
PrintablesnikS

Sony WH-CH720N Wireless headphones case

Simple case for Sony wireless headphones. Custom fit for Sony WH-CH720N but others will also work. For headphones where only the ear shells can rotate. Its a pressure fit for the lid, so tight tolernaces are needed.

Downloads
310
Likes
26
Rating
5
P
Printablesliqwid

3 inch Spacer Installation Tool for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C

There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…

Downloads
308
Likes
21
Rating
5
P
PrintablesJR

Govee H706A Permanent Outdoor Lights Pro Mount Bracket

Govee H706A Permanent Outdoor Lights Pro Mount Bracket I’ve designed two versions of this mount: A side-mount version A narrow-edge version requires just 1.5 inches of space. Both versions are designed with #8 self-tapping screws. I…

Downloads
300
Likes
15
Rating
5
P
Printables3DMegoldasok

H7 LED adapter for Ford/Opel/Fiat

H7 Led adapter, based on osram 64210DA04 part. Print from hight temperatur and impact resistant material ( ABS-CF/GF ; ASA-CF/GF ; PA-CF/GF ) The original part made from PA-GF! 2 type, 1 with parts and assy optimalized for FDM prints, and…

Downloads
296
Likes
18
Rating
5
P
Printablesillumeo

H7 Bulb case

A case for an H7 Car / Motorbike bulb. Only tested on the one spare bulb i had. Threads come from Dan Kirshner Can be a little hard to open when fully wound in, but pliers work. Print instructions Category: Automotive Summary A case for…

Downloads
270
Likes
43
Rating
4
P
PrintablesBoluge

NH3* / NH7* / 4R3* watch movement support V2

Description Description The Precise Support for Seiko NH3*, NH7* or 4R3* movements offers exceptional precision in dial placement whether the crown is at 3, 3.8 or 4.1 o'clock. Printing Instructions: Recommended Settings: Use a layer…

Downloads
257
Likes
23
Rating
4.5
P
PrintablesOnlyPaul

NZXT H7 COVER BOTTOM FRONT

NZXT H7 COVER BOTTOM FRONT

Downloads
242
Likes
19
Rating
4.75
P
Printablesliqwid

Gable Roof Peak Mount for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C

This mount gives you a flat surface to mount a Govee light in the top center of a gable roof peak. I designed it to perfectly fit a roof with a pitch around 5.3/12 with the arctan(5.3/12) = 23.83 degrees. It should work fine for roofs…

Downloads
240
Likes
10
Rating
5
P
PrintablesDennis

Opel Astra H H7 Led adapter 16mm

Adapter to fit a led light into an Astra H. Currently I use one printed with PLA and 15% infill. The heat from the led light won't affect the adapter (yet). To be sure, print with a more heat resistant filament. For the best fit in the…

Downloads
225
Likes
21
Rating
5
P
PrintablesNikosSprocket

Anti-Vibration Shock Absorber Damping Plate for MATEKSYS H743-SLIM Flight Controller (Updated)

FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…

Downloads
222
Likes
18
Rating
0
P
PrintablesDomass

H7 LED bulb holder

Print settings Nozzle 0.4 mm Layer height 0.1 mm Material PETG, ASA, ABS. I do not recommend PLA because of its low melting point Print with supports I recommend a infill between 30-100 Print from black or grey filament, as the colour…

Downloads
210
Likes
14
Rating
0
P
PrintablesJan Lukeš

Singer 14SH754 waste tray

Just a simple waste tray for 14SH754, might fit some of the clones i.e. Pfaff Hobbylock 2.0 looks very similar, but will have to check IRL. Works just awesome, catches not only cut fabric, but also portion of the dust! Print Settings…

Downloads
183
Likes
17
Rating
0
P

NZXT H7 Fan Duct Scoop for 140mm fans (remix of OnlyPaul)

An airduct/scoop to fill up the hole in the NZXT H7 Flow. The scoop directs the air from the front fans towards the GPU. This duct is specifically designed to work with 140mm fans. It bolts through the air duct into the 140mm fan as shown…

Downloads
182
Likes
13
Rating
0
P
PrintablesGreg

Mini shelf for USB Hub TP-LINK UH700

Mini shelf for USB Hub TP-LINK UH700 Print instructions Supports: No Resolution: 0.2 mm Infill: 40% Perimeters: 3

Downloads
176
Likes
18
Rating
0

Cooler Master MH751/MH752 Swivel Screw Stopper Replacement Part

Replacement part for Cooler Master MH751/MH752 headset. Category: Audio

Downloads
159
Likes
5
Rating
0
P
PrintablesJan Mucha

Mercusys Halo H70X wall mount holder

Wall mount holder for Mercusys Halo H70X mesh wifi device.

Downloads
155
Likes
8
Rating
0
P
PrintablesCottees

Subaru H7 Headlight Plug

Replacement plastic housing for the H7 headlight plug in a Subaru Liberty/Legacy. May work with other cars.

Downloads
152
Likes
24
Rating
5
P

Gigabyte 4090 GPU Bracket for NZXT H7 Flow

Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…

Downloads
146
Likes
24
Rating
0
P
PrintablesVitor Boschi

Holder for TP-Link UH700 USB Hub

This is a simple support I designed so I could attach the USB hub under my desk. It will also fit the UH720 model, but one of the side ports will be blocked. I suppose it shouldn't be too hard to update the model to avoid that problem. It…

Downloads
145
Likes
19
Rating
5
P
PrintablesBuffster08

Govee Pro Mounts - H706

I wanted a mount that could be painted to match the eaves, conceal the wiring in plastic wiremold/raceway. and protect the LED module. Other mounts I found were only designed to clamp the LED module by the wire. I printed these parts in…

Downloads
138
Likes
16
Rating
0
P
PrintablesHanzzzie

TP-Link UH700 8040 extrusion mount for simrig

needed to mount the usb hub to the profiles of my simulator it's a snug fit and doesn't jiggle around. uses M5 to secure

Downloads
138
Likes
12
Rating
5
P
Printablesmstarzec

Matek H743 WLITE holder

Matek H743 WLITE holder

Downloads
137
Likes
3
Rating
0
P
Printableszdzd

H7 bulb replacement tool.

Bulb replacement procedure: Open the headlamp cover. Disconnect the electrical connector from the bulb. Snap the tool onto the bulb contacts. Unlock the spring latch. Pull out the tool with the bulb. Replace the bulb in the tool with a…

Downloads
136
Likes
24
Rating
5
P
PrintablesSuperMatte

SH72 Printable Shell (Better Than Original)

So, how is it better? Subjective: it's more appealing to me, more comfortable to hold Objective: it has a arrow-shaped hole for a heater LED, it has some room for a turbo button mod (basically shorting a potentiometer to it's max value by…

Downloads
135
Likes
30
Rating
0
P
PrintablesMarokain

Adapter Roborock H6 - H7 to 35mm

Adapter for Roborock H6 and H7 to 35mm suction attachments. Cut spring Ø12mm about 15mm long. Parts must be glued together. Adapter für Roborock H6 und H7 auf 35mm Saugaufsätze. Feder Ø12mm ungefähr 15mm lang zuschneiden. Teile müssen…

Downloads
131
Likes
12
Rating
5
P
Printablesmcbeenb

Openmv H7 Plus R3 Cover

This is an updated version of Stefan's awesome little camera case for the Openmv. I have modified it to work with the underside SD slot and bottom power connector.

Downloads
123
Likes
1
Rating
0
P
PrintablesnikS

Sony WH-CH710N Wireless headphones case

Simple case for Sony wireless headphones. Custom fit for Sony WH-CH710N but others will also work. For headphones where only the ear shells can rotate. Its a pressure fit, so tight tolernaces are needed.

Downloads
122
Likes
16
Rating
4.5
P
PrintablesOscar A

Volvo V70 Reverse light H7 adapter

Adapter for Volvo V70n reverse light to fit a h7 lightbulb. I used at Philips H7 - Led that could be rotated.

Downloads
120
Likes
20
Rating
0

Mercursys H70X H80X Holder wall-mounted

Wall Mount for Mercusys H70X / H80X This wall mount is specifically designed for the Mercusys H70X and H80X devices. It allows for easy and secure wall installation, saving space and ensuring optimal placement for better signal…

Downloads
107
Likes
3
Rating
5
P
PrintablesMagmabow

STM32H747 Arduino Design Files

Watch the full video here : Check out PCBWay Here: https://pcbway.com/g/WQ1kw6 Waveshare microcontroller boards featured in this video can be found here: https://www.waveshare.com/esp32-s3-nano.htm?&aff_id=172582 My website with free…

Downloads
107
Likes
5
Rating
0
P
Printablesappallingdonut7

Sigma 35mm Art f/1.4 Lens Hood - LH730-03

Lens hood LH730-03 for the original Sigma 35mm f/1.4 Art lens

Downloads
102
Likes
5
Rating
0
P
Printablesboso

LED Adapter, Hyundai i30 (2013), Philips Ultinon Pro6000 Boost H7-LED

It is a remix from this one: https://www.thingiverse.com/thing:7100587 This is an adapter for the Hyundai i30 (2013) to retrofit the Philips Ultinon Pro6000 Boost H7-LED. The ring form the LED needs to be detached, that fit this one over…

Downloads
95
Likes
8
Rating
0
P
Printablesootzlau

Grease Injector Super Lube for MGH7 linear Rail

A remix for pushing lubricant through mountingholes of linear rails or other use-cases.

Downloads
90
Likes
15
Rating
5
P
Printableserelio_brolis

Headlight Bulb Socket H4 / H7 (FORD transit mk7)

Hello brothers and sisters, So my Ford Transit is disintegrating before my eyes… started to replace crucial parts. This socket is for double H4 headlights, but I think works with h7 also. I recommend using same type of metal connectors as…

Downloads
90
Likes
18
Rating
0
P
PrintablesKiko Jr.

GM/Chevrolet Astra H7 Led Adapter (16mm)

Adapter for the H7 Socket on the GM/Chevrolet Astra year 2000 or plus. If the LED gets loose in the adapter, i recommend to drill a small hole and screw a set screw to lock the led. LED Diameter: 16mm Based on the led: Shocklight S17

Downloads
89
Likes
15
Rating
0
P
PrintablesBAH

Govee H705 / H805 Series Permanent Outdoor Lights Mounting Brackets

Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke

Downloads
88
Likes
11
Rating
0
P
PrintablesVergil

H7 Bulb removal tool for Scirocco MK3

Reaching in and replacing the H7 Bulbs in the Scirocco headlight unit is a little painful and I personally don't have small enough hands to reach in and exert enough force in that weird angle to unlock the bulb holders. Many video guides…

Downloads
88
Likes
6
Rating
5
P
Printablestheluggage

NZXT H7 front panel ball clip

Printed in PLA at 0.12 and worked well

Downloads
87
Likes
1
Rating
0
P
PrintablesClassicGOD

Car Bulb Container for H7 W21/5W and W5W bulbs

Can fit one H7 bulb, one W21/5W or W21W bulb and 2 W5W bulbs. Due to the differences in bulb dimensions from different manufacturers bulb fit can range from tight to loose so always keep the container in correct orientation when opening.…

Downloads
87
Likes
18
Rating
4.5
P
PrintablesCAR KEYCHAIN

Keychain Volvo FH750

This unique keychain is a miniature replica of the Volvo FH750 , designed with a sleek, compact look at 7 cm by 5 cm . Printed in 3D with a two-color layer change for added depth and visual appeal, it captures the distinctive silhouette…

Downloads
86
Likes
6
Rating
0
P
Printablespico

Arduino Portenta H7 LoRa shield case

Portenta H7 + LoRa camera shield. The LoRa antenna can fit in the tunnels above the case. The bump at the bottom can be threaded with a tripod 1/4-20 UNC tap. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes…

Downloads
86
Likes
5
Rating
0
P
PrintablesMillissimo

Kawasaki Z800 H7 LED Bulb Adapter

This custom 3D-printed adapter is designed specifically for installing H7 LED light bulbs onto a Kawasaki Z800 motorcycle. The adapter allows for a secure and straightforward installation process by accommodating the removable plastic…

Downloads
86
Likes
9
Rating
0
P
PrintablesLiron

Samsung Galaxy Watch7 Stand

A stand for charging Samsung Galaxy Watch7

Downloads
85
Likes
2
Rating
0
P
PrintablesAnghelos

Sony WH-CH720N Repair

Remixed Axnarc's model to add the missing grooves, no need to cut away tabs anymore.

Downloads
83
Likes
4
Rating
0
P
Printablesstkl12

Roborock H7 - wall mount for adaptors

I used to have the adapters magnetically mounted to the charging station, but they never quite stayed there. So i quickly designed this wall mount. It is meant to be screw into the wall, but you can use the step-file to adjust it to your…

Downloads
81
Likes
16
Rating
5
P
PrintablesHasiči Opava

TPH700 - držák vysílačky

Držák vysílačky použitelný na různé (i zaoblené) povrchy s možností zvolit si úhel sklonu. V2 - starý systém podložky a spojky V3 - nový systém s kloubem, na utahovací kroužek použij M3 šroubek a matku. Přichycení úchytu na palubku je…

Downloads
81
Likes
10
Rating
5
P
PrintablesHackthis02

NZXT H700 GPU Support Bracket

Anti sag brace for the NZXT H700/H700i

Downloads
80
Likes
10
Rating
0
P
Printablesmbadin

Singer 14SH754 sewing machine wastebox

Product Description This 3D model is an add-on waste box designed for the Singer 14SH754 overlock sewing machine. Since Singer does not offer an original waste box for this model, this printed accessory fills that gap and significantly…

Downloads
79
Likes
20
Rating
0
P
PrintablesKlaas Weerstand

TP-Link UH720/UH700 USB hub organiser

Print on it's side, no support needed except for the opening in the side. Works for TP-Link UH720 and UH700 USB hub.

Downloads
78
Likes
7
Rating
0
P
PrintablesUuuuaaaiua

sh72 case

hello, for this case you need to print all th files and then put some foam into the holes. (I used foam from the st72 box, it is black and cool). I think that nylon, ABS or some composite are the best materials for this case due to high…

Downloads
77
Likes
11
Rating
0
P
PrintablesBoluge

NH3* / NH7* / 4R3* watch movement support

Description The Precise Support for Seiko NH3*, NH7* or 4R3* movements offers exceptional precision in dial placement whether the crown is at 3, 3.8 or 4.1 o'clock. Printing Instructions: Recommended Settings: Use a layer height of 0.20…

Downloads
75
Likes
6
Rating
0
P
PrintablesAdamDavenport

Roborock H7 Stick Vacuum Latch Repair

The latch on the dust canister broke off, and so I printed a new one. I used a 1/8 x 5/16" pop rivet to secure it to what remained of the latch on the dust canister. You could optionally secure it even further with some super glue.

Downloads
74
Likes
5
Rating
0
P
PrintablesGunbleR

Kia h7 hid adapter

HID adapter for kia (ceed) dipped beam (h7 lamp) Made for generic HID/xenon bulbs from aliexpress. model includes bulb mount and prongs to plug adapter for sturdier connection. Plug adapter was remodeled since i took the firrst pictures,…

Downloads
72
Likes
13
Rating
0
P
PrintablesKiLLiE

Variable Openmod Part 2 Sony WH-CH710N Remix

Made a set of broken headphones whole again!

Downloads
72
Likes
18
Rating
5
P
PrintablesDrakepaul

Niceboy ion Hurricane H7

Držák na zeď pro vysavač Niceboy ion Hurricane H7 - tisk pet-g výplň 40%

Downloads
71
Likes
3
Rating
5
P
PrintablesTada

SH72 case V2

i loved what he designed and wanted to ad some new features, hot stand with 2 coins ( mine is 25 kr turkish lira but 10 cent euro will be the same size) , sponge or steel wool compartment, and also i had the 7 tip package so 1 was always…

Downloads
68
Likes
12
Rating
0

CH751 Key (Import from Thingiverse)

Text from Thingiverse: Summary A standard 1284x fleet key, like one you can buy on amazon, recreated to the best of my ability in CAD. I haven't been able to test it so I do not know if it works as intended so you may end up with the end…

Downloads
67
Likes
3
Rating
5
P
PrintablesKetamine29

SH72 Soldering iron box

This is only my second model that I am posting publicly. I am waiting for your feedback.

Downloads
66
Likes
7
Rating
3
P
PrintablesVisualReversal

Painting Tool for Govee RGBIC LED Permanent Outdoor Lights Models H705 (A, B & C)

This is a very simple model. It's just a tube with a bevel on the top that allows you to position it over the dome of your Govee Permanent Outdoor Lights so you can spray paint them to match the color of your house (or whatever reason…

Downloads
66
Likes
11
Rating
5
P
PrintablesVoland

TP-LINK UH700 USB 3.0 7-Port Hub – Undergarment Holder

This allows to install TP-LINK UH700 USB 3.0 7-PORT Ver.3.0 under a desk or at any Multiboard plate.

Downloads
62
Likes
5
Rating
0
P
PrintablesRoLL

Sony DSC-H1 H2 H5 H7 H9 H50 F828 R1 Camera - Lens Hood

To be installed on 58mm Adapter for DSC-H1, DSC-H2, DSC-H5 and other 2 aperture size available, 85mm and 90mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Generic…

Downloads
62
Likes
4
Rating
0
P
PrintablesVisualReversal

Larger Hooks for Govee Smart Curtain Lights (H70B1)

I know these are late to the Christmas party, but I wanted to get these out anyway. I'm dealing with a family emergency at the moment, so forgive me I you have questions and I don't respond right away. I needed some larger hooks for my…

Downloads
62
Likes
20
Rating
0
P
PrintablesRost

H4 to H7

(EN) H4 inside, H7 outside (RU) H4 внутри, H7 снаружи

Downloads
61
Likes
1
Rating
0

NZXT H700 GPU Support Bracket

Inspired by this GPU support but the designs are so different I didn't end up calling this a remix. This is a GPU support bracket for an NZXT H700i or NZXT H700 case. It fits my GTX 1080ti Founders Edition, which means it should also fit…

Downloads
61
Likes
17
Rating
0
P
PrintablesJohn S

Replacement Cord Hooks for Hoover Wind Tunnel Vacuum UH72600

Over the past few years I have managed to break both cord hooks. So I just made new ones! These have been in service for awhile and are working fine. They should load up in the intended printing position and do not require supports. The…

Downloads
61
Likes
4
Rating
0
P
Printablesliqwid

Recessed Light Mounts with Optional Removable Covers for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C

Note that there are two versions of mounts provided - One accepts a removable cover and the other has no removable cover ability. The one that accepts a removable cover has an annular ring on the bottom designed to help prevent any light…

Downloads
60
Likes
13
Rating
0
P
Printablesvatbrain

OpenMV H7 Camera Case Bottom with Triangular Mounting Pattern

This is a remix of the bottom/back portion of the OpenMV H7 Camera case found here https://openmv.io/collections/cams/products/openmv-cam-h7-case and here: https://github.com/openmv/openmv-boards/tree/master/cad It allows three M4 nuts to…

Downloads
59
Likes
1
Rating
0
P
Printablesmedyk3D

GoPro Tripod Quick Release Mount for Camrock TH70

I couldn't find any GoPro quick release mount for Camrock TH70 so I designed this using upper part from GoPro Tripod mount by tmorris9 ( https://www.thingiverse.com/thing:81333 ) The base at the bottom is 39.6 mm exactly. Tips: print with…

Downloads
56
Likes
2
Rating
0
P
PrintablesSed

Roborock H7 Wall Mount

The Roborock H7 Pure stick vacuum did not come with a wall mount and a wall mount is not available for purchase. This wall mount can be wired to charge the vacuum when the vacuum is inserted or the wall mount can be used just as a hanger…

Downloads
56
Likes
9
Rating
5
P
Printablescooper7012

Roborock H7M1A vacuum wall mount

This is a wall mount for the Roborock stick vacuum model: H7M1A

Downloads
52
Likes
5
Rating
5
P
Printableslucien atkinson

Mitsubishi Pajero IO (Pinin) (H76W) bumper cover

A replacement for the crappy OEM rear cover that falls out.

Downloads
50
Likes
3
Rating
0
P
PrintablesOrdspilleren

SH72 Soldering Iron holder for SKÅDIS

A SKÅDIS holder for the SH72 soldering iron. Also holds an additional tip for convenience. Printing Print without supports, top side facing towards the build plate.

Downloads
50
Likes
5
Rating
0
P
PrintablesHasiči Opava

TPH700 vysílačka - kruhový držák

Náhrada originálního držáku + vyztužená verze. Replacement for original part + reinforced version.

Downloads
50
Likes
7
Rating
5
P
PrintablesAndrew Yong

SMA Jack Adapter for Deenlai FSH710 IP66 Junction Box

SMA Jack Adapter for the Deenlai FSH710 junction box that re-uses one of the supplied rubber O-rings and PG9 nuts. Should work with other PG9 thread junction box holes and glands too. Print with supports for the recessed M6 nut hole…

Downloads
50
Likes
17
Rating
0
P
PrintablesTonic92

Hyundai I40 H7 bulb holder 2010-

Its for Hyundai i40 2010- h7 bulb holder the original part was made out of ABS witch always melted. I suggest to use PVDF or PCCF filament, (PVDF is self extinguishing) V2 is for ceramic insert for the bulb (the ceramic connector can be…

Downloads
49
Likes
7
Rating
0
P
PrintablesGrauer Wolf

Einbauhilfe für H7 Led Lampen

Einbauhilfe H7 Led Lampen mit Metallspange Audi/VW

Downloads
48
Likes
6
Rating
0
P
PrintablesYYCPatches

Mounting Bracket for D-Link DUB-H7 USB Hub

I printed this on a Prusa MK3 with PLA, should work with other materials.

Downloads
48
Likes
5
Rating
0

Gridfinity - Reamer H7 set 10Pcs

Updated to increase the length of Reamer 3 and for color printing.

Downloads
47
Likes
5
Rating
5
P
PrintablesTT99C5

Dell H730/H330 PERC RAID Controller 40mm Fan Bracket

I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round. There were heat sink variations…

Downloads
46
Likes
1
Rating
0
P
Printablesdemanu

Samsung Watch7 Smartwatch Charging Station

Same as original, made compatible with watch7 charging puck.

Downloads
45
Likes
1
Rating
0

NZXT H710 PCI Slot Cover

NZXT PCI Slot Cover should work with others models too.

Downloads
45
Likes
4
Rating
0
P
PrintablesBig John

Govee Light Cover (H705A)

Govee Light cover for (H705A). My house is brown and the lights are white so I didn't want to paint them so I printed a cover that snaps over the light. Printed ASA for the outdoors. Cover is a tight fit but snaps into place perfectly.…

Downloads
44
Likes
3
Rating
0

Arduino Portenta H7 case - ethernet Vision Shield

This is a small case designed for the Arduino Portenta H7 with ethernet Vision Shield board. I used PLA material for the cases.

Downloads
43
Likes
2
Rating
0
P
Printablesjbienz

Mateksys H743 V2 Snap Mount

This print is a solid self-snapping mount for the Mateksys H743 Wing V2 . It can be hot glued into foam planes, or it can be screwed into wood planes with a US #4 wood screw or similar. The top lid securely snaps into the base, but can be…

Downloads
43
Likes
1
Rating
0
P
Printablessamugi

H7 LED adapter for Ford Fiesta mk6 (UK mk7)

Mine is a 2016 Fiesta mk6 "plus". Other adapters I found online were too small and none of them fit my headlights, so I've made this one. Use high temperature resistant material. Use at your own risk.

Downloads
43
Likes
7
Rating
0
P
PrintablesDavid H. Brown

Caster foot for NZXT H7 Flow case

My computers live underneath the corner of an L-shaped desk, so I always like to replace their feet with casters to make it easier to access ports, etc. I printed these in nylon (Taulman3D Alloy 910, black) for strength/impact resistance,…

Downloads
43
Likes
10
Rating
0
P
PrintablesTomáš Vávra

Under desk modem holder Compal CH7465 (Vodafone)

Under desk holder for modem Compal CH7465 (Vodafone). Used 2 scewrs with 8mm wide head. 20% infill and No Supports.

Downloads
43
Likes
1
Rating
0
P
PrintablesnoizOne

NZXT H710 Case Haken

Haken um Kabel am Tower zu befestigen. Die Haken passen in das Lochgitter vom NZXT H710 Case.

Downloads
43
Likes
7
Rating
0

Sony WHCH710N Headband Clip Replacement

Replacement headband clip for the Sony WHCH710N headphones. Modeled in Solidworks based on the unbroken one I had.

Downloads
42
Likes
5
Rating
0