Search results: helt

Sort order

856 models

P
PrintablesCAD-Guy

Heltech Wireless Paper Desk Stand

Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
17
Rating
0
P
Printablesmuzi.works

H1 - Case for Heltec V3 running Meshtastic

[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…

Downloads
20,898
Likes
2,529
Rating
4.83
P
PrintablesTonyG

Heltec v3 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
17,148
Likes
1,678
Rating
4.86
P
PrintablesTonyG

Heltec v3-mini case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
8,425
Likes
907
Rating
4.59
P
Printablesvascosim

H1+ - Enhanced H1 Case for Heltec V3/Heltec V4 by muzi.work running Meshtastic

[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…

Downloads
7,315
Likes
666
Rating
4.74
P
Printablesmuzi.works

H2T - Case for Heltec T114 with GPS running Meshtastic

A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…

Downloads
6,748
Likes
895
Rating
4.88
P
PrintablesTonyG

Heltec Wireless Tracker case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…

Downloads
5,234
Likes
367
Rating
4.81
P
PrintablesAlley Cat

Heltec LoRa 32 V3 HT Pocket Case

Commercial Use and Attribution Notice: Alley Chat HT Pocket © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…

Downloads
4,457
Likes
631
Rating
5
P
PrintablesAlley Cat

Heltec LoRa 32 V3 HT Slim Cases

Update 24 April 2025: Added a 3k version with internal antenna space and no SMA. Update 30 July 2024: Added desk mounts and Baofeng clips that take M2.5 nuts. Commercial Use and Attribution Notice: Alley Chat HT Slim © 2024 by Alley Cat…

Downloads
4,112
Likes
508
Rating
4.97
P
PrintablesTonyG

Heltec LoRa 32 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
3,887
Likes
301
Rating
4.7
P
Printableszerofox3D

Bender Battery Case for the Heltec V3 & Heltec T114 Meshtastic MeshCore LoRA Node

***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…

Downloads
3,589
Likes
368
Rating
4.97
P
PrintablesAlley Cat

Heltec LoRa 32 V4/V3 Pocket Pager Case

Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…

Downloads
3,411
Likes
342
Rating
4.97
P
PrintablesAdi CEvil

3D-Printed Enclosure for Heltec V4(GPS)

This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…

Downloads
2,234
Likes
160
Rating
4.44
P
PrintablesAlley Cat

Heltec T114 Pocket GPS Case

Commercial Use and Attribution Notice: Alley Chat HT114 Pocket Pro © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…

Downloads
2,040
Likes
242
Rating
5
P
Printableszerofox3D

Flexo Meshtastic powered node case for Rak WisBlock, HeltecV3, T114, T190, WirelessTracker and RaspberryPi Pico

NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…

Downloads
1,828
Likes
249
Rating
5
P
Printablesmailiou

H1 Big Case for Heltec V3 running Meshtastic

muzi.works' [H1 - Case for Heltec V3 running Meshtastic] is a great design, but my battery couldn't fit in it, so I remixed its case. If you are like me and have trouble with the battery being too big, you can consider it. This case is…

Downloads
1,774
Likes
193
Rating
5
P
Printablesslabua

Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready

Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…

Downloads
1,771
Likes
432
Rating
4.78
P
PrintablesAdi CEvil

WiFi LoRa 32 (V4)(Heltec V4)

This is a cool case. Designed for Heltec WiFi LoRa 32 (V4). Includes 3000mAh battery, antenna, and PCB board. M2.5 self-tapping screws required. Personal use only. Commercial rights and custom design: [email protected] Will be…

Downloads
1,700
Likes
150
Rating
4.56
P
PrintablesMichal

Heltec V3 Enclosure

Sestavení/Assembly Vložení dvanácti M3 závitových vložek pomocí páječky. / Inserting twelve M3 threaded inserts using a soldering iron. Vložení elektroniky - je potřeba zkontrolovat, jestli USB-C konektor sedí do rámu. / Inserting the…

Downloads
1,695
Likes
220
Rating
4.82
P
PrintablesAbstract445

H1+ 18650 battery with Heltec v4 / v3 compatibility

This is the H1+ case modified to fit common 18650 batteries and with added compatibility with the newer Heltec V4 module. Similar to my previous model. Made with the request of and help from: @JLO_2137313 Also added separately printable…

Downloads
1,684
Likes
222
Rating
4.83
P
PrintablesAlley Cat

Heltec LoRa 32 V4/V3 Slim Cases

Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…

Downloads
1,647
Likes
162
Rating
5
P
PrintablesTonyG

Heltec Wireless Stick Lite v3 (WSLv3) case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
1,627
Likes
132
Rating
5
P
PrintablesAWHunter

H1++ Case for Heltec v4 for 2 x 18650 battery

Remix of H1+ case for Heltec v4 with space for 2 x 18650 batteries in two versions - with lodgement or without it. Based on version for antennas up to 15mm in diameter at the base. Needs 2 M3x12 if you planning to use clamp. Best to use…

Downloads
1,609
Likes
143
Rating
4.86
P
Printableszerofox3D

Nibbler Meshtastic powered Case for Heltec V3 and T114

***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…

Downloads
1,503
Likes
236
Rating
5
P
PrintablesHedo3D

Pferde Unterstand - Horse shelter (Schleich Horse Club) - easyprint

Pferde Unterstand - Horse shelter for Schleich horses easy to print, easy to assemble Print instructions Rafts:No Resolution:0.3 Filament: any PLA or PETG

Downloads
1,480
Likes
264
Rating
4.9
P
PrintablesAdi CEvil

3D-Printed Case for Heltec V4(GPS)

This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…

Downloads
1,447
Likes
101
Rating
4.4
P
PrintablesChristian Undso

H1 Big Case for Heltec V4 running Meshtastic for standard & bendable antennas

Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.

Downloads
1,422
Likes
138
Rating
4.8
P
PrintablesAlley Cat

Heltec T114 Slim Cases

Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…

Downloads
1,306
Likes
162
Rating
5
P
PrintablesHarukiToreda

HP - Heltec Wireless Paper Case for Meshtastic

***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…

Downloads
1,275
Likes
161
Rating
4.85
P
Printablesnonsintetic

Heltec V4 18650 compact case (updated)

UPDATE: New version is up that includes less fiddly buttons, they print flat now and should be easier to glue into place. I made them a bit bigger too. Old version files included in /old. I wanted a portable case for my new Heltec Lora32…

Downloads
1,249
Likes
110
Rating
4
P
PrintablesPrettyPrinter
Downloads
1,198
Likes
113
Rating
4.86
P
PrintablesMatt Smith

Heltec v3 case for 3000mAh battery

A form-fitting snap together case for the Heltec v3 meshtastic radio with OLED display that fits a makerfocus 3000mAh battery nicely. It's a close fit, so take your time putting it together. I tried to adjust some tolerances to make it a…

Downloads
1,187
Likes
67
Rating
4.9
P
PrintablesAlley Cat

Pager Style Holster for the muzi.works H1 Heltec V3 Case

UPDATE: I took out the lump because it wasn't really needed and gets in the way of most lanyards and some mods. Added a version that works with M2.5 nuts for the Baofeng clip. I based it on the style of the holsters for my Alley Chat HT…

Downloads
1,182
Likes
223
Rating
5
P
PrintablesLWC

Meshtastic Heltec V3 "AMade 2"

UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…

Downloads
1,178
Likes
541
Rating
5
P
Printablescrazeeeyez

Heltec ESP32 Lora V3 Case

I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.

Downloads
1,164
Likes
86
Rating
4.6
P
PrintablesTom_Ash

3D-Printed Enclosure for Heltec V4(GPS)Fixed

There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…

Downloads
1,127
Likes
125
Rating
4.71
P
PrintablesBLKOutCOmms

TextMesh (Heltec V3 Edition)

The TextMesh Device, built around the Heltec LoRa V3, offers essential functionality in a portable, stand-alone design. Equipped with GPS, a buzzer, a 3000mAH battery, a keyboard, and a power switch, it's designed to be straightforward…

Downloads
1,114
Likes
223
Rating
4.83
P
PrintablesKubanow234

Aquarium shrimp, small fish cave, home, house, shelter

Easy to print, no support cave with window, for shrimps and small fish with window

Downloads
1,098
Likes
171
Rating
5
P
PrintablesTejasav Thind

Heltec V3 case with meshtastic Logo

These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Please respect the Creative Commons license restrictions I have chosen…

Downloads
1,070
Likes
83
Rating
4.57
P
Printablesmclark

Heltec Wireless Tracker Case

This is a minimal case for the Heltec Wireless Tracker with a lipo battery. The user and reset buttons are supported, and the USB-C charging port is easily accessible. Each corner has support for a wriststrap, rubber band, or elastic to…

Downloads
970
Likes
54
Rating
4.5
P

Heltec Tracker (aka HTIT-Traker) Lora with Lithium Battery Enclosure

This is an enclosure for the Heltec Tracker, takes a 3.7v 1350mAh Battery (appx 3.8mmx6mm). Two heights are included - a short one for out of the box use and a tall one incase you added pinheaders so you can hook up additional telemetry…

Downloads
957
Likes
58
Rating
5
P
PrintablesSheepCounter

Heltec V4 Case

This case is designed for the Heltec LoRa V4 boards and uses M2×10 screws for assembly. The “Standard” model works well for small batteries or USB-powered setups. The “Battery Extended” version moves the keychain loop outward to create…

Downloads
943
Likes
93
Rating
4.75
P
Printablestehspiah

H1 iv Case for Heltec V4 (Modified Muzi Works H1)

Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…

Downloads
941
Likes
92
Rating
0
P
PrintablesAlley Cat

Heltec T114 Slim Pro GPS Case

Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…

Downloads
925
Likes
120
Rating
5
P
PrintablesGremlin87

Meshtastic Heltec V3 Enclosure - Long for 18650

I wanted a case for my Heltec V3 that would be suited to carrying in a pocket or sitting on a desk while having a good battery life. This case is designed to be long in order to have the Heltec and 18650 end to end instead of stacked. I…

Downloads
867
Likes
129
Rating
5
P
PrintablesShred

Heltec LoRa32 Minimal Case

I was looking for a minimal case for the Heltec LoRa 32 module. The cases I found either also offered room for a LiPo and a power switch, were not designed for the new solid LoRa antenna, or the module just did not fit properly. So I…

Downloads
821
Likes
69
Rating
4.75
P
PrintablesRecon3D

Heltec T114 custom/bigger H2T case

Made the bottom case a bit bigger to accommodate an 2000mAh battery and widened the screw hole to allow for a threaded insert and changed the front and buttons to allow for the insertion of the Heltec T114 with its protective plastic…

Downloads
792
Likes
93
Rating
5
P
PrintablesAlley Cat

Heltec T114 Pocket Case

Commercial Use and Attribution Notice: Alley Chat HT114 Pocket © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…

Downloads
786
Likes
82
Rating
4.75

NexGen3D: Meshtastic ATAK Heltec T114 Case V2

18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…

Downloads
780
Likes
134
Rating
5
P
PrintablesHarukiToreda

Hel-Txt - Standalone Meshtastic communicator (Heltec ESP32 V3/V2)

***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…

Downloads
773
Likes
177
Rating
5
P
Printablesmarigu

Heltec V2 and V3 Meshtastic Lora case

Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case. 18650 Li-Ion battery holder included (for longer protected 18650 battery). I recomend connect some high-gain antenna (some better and bigger than stock one…

Downloads
758
Likes
75
Rating
4.75
P
PrintablesHighDoping

Heltec LoRa 32 V3.1 Mockup

Heltec LoRa 32 V3.1 mockup model. Dimensions measured by hand. Accurate to about 1mm. Heltec LoRa 32 is a popular device for Meshtastic Project . However, the manufacturer provided drawing has wrong dimensions. And the free 3d print case…

Downloads
748
Likes
58
Rating
5

NodeBrix Modular Case System for Heltec LoRa32 v3 and RAK19007 for use with Meshtastic

Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…

Downloads
745
Likes
137
Rating
4.5
P
PrintableseSeL

Railway trackside shelter 1:87 H0

Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…

Downloads
738
Likes
84
Rating
4.75
P
PrintablesAlley Cat

Pager Style Holster for the muzi.works H2T Heltec T114 Case

I based it on the style of the holsters for my Alley Chat HT Pocket, and I think it goes really well with the H2T design. Baofeng Belt Clip Generic Belt Clip Heat Set Inserts This is a new work completely owned by myself, but I am…

Downloads
726
Likes
105
Rating
5
P
PrintablesAveygo

Heltec V3 Case H1 Minimal + Extra space for screen

Remixed from V1.1.1 Original design is epic - but the weird grip on the side and all the text felt really distracting for such a small case. Updated 2024/04/17 to add space for the screen - should help prevent cracking but no guarantees -…

Downloads
726
Likes
82
Rating
4.67
P
PrintablesHorusTheForest

Heltec Wireless Paper case for Meshtastic

Let me introduce you to my custom-designed enclosure for the Heltec Wireless Paper. This enclosure is versatile, accommodating larger batteries, and features a simple button design on its side for easy operation. Hardware: - Heltec…

Downloads
725
Likes
91
Rating
4.75
P
Printablesscottrouse

Ice Fishing Shelter Hook

This is a simple hook that attaches to the inside of many hub-style ice fishing shelters or tents. It was created for an Eskimo FatFish 949ig, but it should fit most hub-style shelters. I believe Eskimo poles are 11mm in diameter. I don't…

Downloads
692
Likes
83
Rating
5
P
PrintablesLukáš Seidler

Underground shrimp shelter for aquarium

Created this model to allow my shrimps to hide from other fishes and for them to be able to hide from the direct light. They seam to like it quite a bit. Print settings: Nozzle: 0.4 mm Layer height: 0.2 mm Supports: No Wall thickness: 0.8…

Downloads
640
Likes
111
Rating
4.5
P
PrintablesCodeChomper

Meshtastic Pocket Heltec V3

This case was designed to hold a Heltec V3 lora board and a MakerFocus 3000 mAh 1S lipo to be used with the Meshtastic node network. It is slim and easy to carry in your pocket and with a large battery should last a long time between…

Downloads
640
Likes
69
Rating
5
P
Printableszerofox3D

Hermes External Solar Node Enclosure for MeshCore Meshtastic V2 for Rak and Heltec

Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…

Downloads
628
Likes
101
Rating
4.67
P
Printablesunhild

Meshtastic Heltec Vision Master E213 case

Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.

Downloads
623
Likes
61
Rating
5
P
PrintablesMaster_3D

Collection Shrimp shelter / cave / tube

Collection of shrimp houses

Downloads
621
Likes
113
Rating
5
P
PrintablesGendemik

GDMK Heltec v2/v3 Chunk 18650 (modular case project) Meshtastic inspired

A heltec case designed to be small but have a bit more of a useable battery tray. Visit us: Gendemik.co.uk Newer stl files can be obtained at the link above. Tried and tested as a daily driver and used by a few of the UK NW meshtastic…

Downloads
618
Likes
93
Rating
5
P
Printablessmirnoff01

HelTec LoRa 32 V3 Holder

This holder allows you to put your Heltec anywhere you want and inside any enclosure you choose. Just use either superglue, double sided tape or even velcro? Just feed the battery plug through the bottom hole at the back and plug it into…

Downloads
617
Likes
52
Rating
5
P
PrintablesSynaptic84

Heltec Wireless Paper Slim Case

Case for Heltec Wireless Paper, there are so few cases for it, so I decided to make one and share it here. My goal was to make it as slim as possible. Final size of the case: 46mm x 87mm x 18mm and only around 60g with the board and the…

Downloads
613
Likes
67
Rating
5
P
PrintablesHD_Creator

Meshtastic Heltec V3 housing with space for GPS and battery

Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…

Downloads
607
Likes
82
Rating
5
P
PrintablesHighDoping

Heltec LoRa 32 V3.1 Case - 18650 Ver

A snap on case for Heltec LoRa 32 V3.1. This model has an updated version that has better tolerances. Add a standard cheap 18650 holder and it's good to go. Battery holder size (with battery) 78mm*21mm*22mm. Print with PLA or PETG.…

Downloads
598
Likes
72
Rating
5
P
PrintablesMatthijz98

Super small Heltec Lora v3 case for Mestastic

I bought a few Heltec boards and wanted to print some cases. Found a few already on Printables but i found a few problems: there are big, hard to print or not fitting the bigger antennas that were in my kit. The goal for this case was:…

Downloads
581
Likes
90
Rating
5
P
PrintablesPetr Bravenec

Meshtastic enclosure: Heltec V3 and Heltec Tracker

The enclosure is designed for the Heltec V3 or Heltec Tracker. The bottom part of the enclosure is common to both variants. The enclosure is sufficiently dimensioned for a 26650 battery. Both parts hold together by self-clamping.…

Downloads
543
Likes
80
Rating
5
P
Printablesbzed

Heltec Wireless Stick (Lite) v3 case

Heltec Wireless Stick (Lite) v3 case Parts needed: Heltec Wireless Stick v3, either in the Lite or "normal" version including the antenna cable. 4 ruthex style M3 inserts, d=4.6mm, h=5.7mm 4 M3x12 screws, all kinds with flat heads should…

Downloads
537
Likes
62
Rating
5
P
Printablesshaunhey

Heltec v4 Wall Mount Enclosure

A simple enclosure for the Heltec v4 (w/ screen) with a keyhole slot on the back to hang from a nail. Includes a hole for an SMA connector as shown in the photos.

Downloads
516
Likes
53
Rating
4.86
P
PrintablesIllia Leoshko

Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/Vibro/GPS/Environment sensor/Belt clip/M5Stack CardKB Keyboard-ready

Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…

Downloads
513
Likes
120
Rating
4.67

Heltec V3 - Case

Simple, discreet case. Requires brass threaded inserts and M3 screws. 4,6 or 8mm in length. This is my first upload. A version that can hold a LiPo will be added shortly. Free to download, free to remix, and free to share with friends.…

Downloads
511
Likes
56
Rating
5
P
PrintablesMurder Hornet

Meshtastic Heltec T114 and 18650 Mobile Node

Simple mobile/pocket enclosure for a Heltec T114 board with an 18650 battery. Most models place the battery behind the board, resulting in a bulky enclosure. This is about as compact as possible. Assembles with eight M3 heatset inserts…

Downloads
502
Likes
70
Rating
4.67
P
PrintablesCath

H3 Case - Megapack, for Heltec v3 running Meshtastic

The H3 case features the following modifications over the H1, based on my own experience printing and using the H1 case, and user feedback accumulated from the original model's makes, remixes, and comments. Multiple sizes to accommodate…

Downloads
501
Likes
80
Rating
5
P
PrintablesChee Yong

Heltec LoRa 32 V3 3000mAh

An awesome case for Heltec LoRa 32 V3 originally made by Alley Cat This is a remix version of mine for a larger battery (58.6mm x 39.8mm x 9.3mm), note that the accessories from the original creator will not fit. There is another remix…

Downloads
488
Likes
50
Rating
5
P
Printablesbonk

Heltec LoRa 32 V3 HT Slim Case w/ straight SMA

This is a slight modification of Alley Cat ( https://www.printables.com/@AlleyCat )'s Heltec LoRa 32 V3 HT Slim Case found here: https://www.printables.com/model/936437-heltec-lora-32-v3-ht-slim-cases I didn't have a right angle SMA…

Downloads
479
Likes
49
Rating
4.75
P
PrintablesMeshNRW

MeshNRW Heltec T114 Case - 3000mAh

This is a case for the Heltec T114 v2 with MakerFocus 3000mAh battery. Designed for the use as a Meshtastic or Meshcore node. Before you start: This model has very small tolerances - Accurate printing required. If you are unsure, scale it…

Downloads
475
Likes
66
Rating
4.8
P
PrintablesRojamor

Parametric Case for LoRa Heltec V3/V4 (Meshtastic Node)

Parametric Heltec V3/V4 Case (Meshtastic) This is a fully parametric remix designed to house Heltec V3 and V4 boards for Meshtastic nodes. It features a customizable enclosure that has been tested to scale from 60x40x30 mm all the way up…

Downloads
469
Likes
81
Rating
5
P
PrintablesJoey Chittick

Meshtastic Heltec Tracker LoRa Board - Enclosure with 18650 Battery Support

Printed on a Bambu P1S with Standard or Optimal print profile. I have only tried PLA for this build so far. Please note that the tolerances are pretty tight to ensure a good fitment. Flash the Meshtastic Firmware to your board, install…

Downloads
459
Likes
47
Rating
4
P
PrintablesGleb Mayorov

Compact case for Heltec v4 GPS Meshtastic node

Description Compact printed case for Heltec V4 Meshtastic client with GPS. External dimensions are 74x44x21.7mm. This case meant to be used with this default Heltec V4 GPS set: Required BOM 803048 Li-Po battery (consider buying with…

Downloads
448
Likes
52
Rating
5
P
PrintablesDroidbot

Heltec Wireless Stick Lite V3 basic case

Here are two versions of a basic case for the Wireless Stick Lite V3 with USB-C port. Both snap together. Buttons are untested, but should work. Might need to be sanded down. They work for either case style. Versions: Basic case: Holes…

Downloads
440
Likes
25
Rating
4
P
PrintablesKeen

Compact 18650 Heltec V3 Case for Meshtastic

I wanted a compact case to house a Heltec V3 and an 18650 battery. I was unable to find one I liked, so I designed one. This was designed in OnShape if you would like to make some alterations. Features Changeable faceplate Battery Kill…

Downloads
434
Likes
70
Rating
5

Стационарный корпус для Heltec V3-V4+ ESP32S3 N16R8

Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…

Downloads
431
Likes
51
Rating
5
P
PrintablesEH Design Works

Heltec V3 Case Meshtastic Radio

This is a remix of another case that has better clearance for a 1100 mah makerfocus battery and cleared up some space so that the antenna connector nut could actually be tightened! I uploaded the solidworks files as well but they are…

Downloads
418
Likes
58
Rating
5
P
PrintablesBlueskies

Meshtastic Standalone Device (Heltec V3 and Cardkb) [Meshdeck]

(Files are updated on 8 April 2024) These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family members, friends and make the…

Downloads
418
Likes
78
Rating
4
P
PrintablesEasy Target

Heltec VisionMaster E290 LoRa mesh node slipcase, slim and fat designs.

A slip case for Heltec Visionmaster E290: Easy to print, comes with several variations: Slim and fat designs. The slim design has 6mm clearance between the top of the LoRa transceiver module and the case back The fat design has 23mm…

Downloads
414
Likes
36
Rating
5
P
PrintableseSeL

H0 1:87 railroad worker shelter

Small, simple building for H0 1/87 scale modelrailway. It could be a shelter for railroad worker but also a garden shed. Print all pieces and glue it together. Depending on your printer, support and brim can be useful for the walls…

Downloads
412
Likes
37
Rating
5
P
PrintablesHighDoping

Heltec LoRa 32 V3.1 Case - LiPo Ver

A snap on case for Heltec LoRa 32 V3.1. For LiPo batteries. Currerently has 2 versions for 103450 and 103655. Battery size: 103450: 10mm*34mm*55mm with protection board. 103655: 10mm*36mm*67mm with protection board. Print with PLA or…

Downloads
401
Likes
40
Rating
4.75
P
PrintablesLWC

Meshtastic Gendemik CHUNKY "MAXIMUS" HeltecV3 Remix

How to and schematics in progress! WARNING! This is a pretty advanced build! You have to know your way around with soldering lots of tiny and fragile wires, electronics etc. There is no programming involved but you need a steady hand and…

Downloads
401
Likes
175
Rating
5
P
PrintablesWatchgravity

Heltec V2 and V4 case

This case allows to fit heltec v2 and v4 fitted. I used M3 * 12 screws. The battery is a 1500mah lipo.

Downloads
399
Likes
23
Rating
3
P
PrintablesBlueskies

Heltec Wireless Paper Enclosure For Meshtastic ( SMA Antenna)

Released on 16 Feb 2024 by Blueskies . Improved version on 22 June 2024 These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family…

Downloads
396
Likes
50
Rating
4.5
P
PrintablesOrnotermes

Heltec ESP32+LoRa+OLED case

This is a case for a dev board with ESP32, a LoRa chip and an OLED made by Heltec, the board might not work the most well built, but it's handy for experimenting. The board often comes with a small coil antenna with a IPEX connector so I…

Downloads
391
Likes
59
Rating
5
P
Printablesmattogodoy

MagSafe case for Heltec T114

This is a case that fits a Heltec T114, a GPS module, a buzzer, a button, and a battery so you can take your Meshtastic node with you everywhere. The buzzer is connected to GND and pin 08. It's used to get a beep every time you get a new…

Downloads
385
Likes
117
Rating
0
P
Printablesnopack

ZYNtastic case for the Heltec v3

Inspired by my friend Z3R0, this case for the Heltec v3 meshtastic board fits inside of a ZYN can. With just enough room for the included antenna and a 750mAh battery (503048). The whole assembly can come out for charging or you could cut…

Downloads
384
Likes
99
Rating
5

NexGen3D: Meshtastic ATAK BaseStation Pro - Heltec V3

Update 11/10/2024: I will be uploading an updated version of this model this weekend (After I fully test everything), I have a new rear battery cover with a built in power switch, as the soft off for the V3 still chews power, and I have…

Downloads
378
Likes
133
Rating
5
P
PrintablesJames

Heltec Lora V3 Outdoor Case Max - No Holes

Created to minimise the chance of leaks, and to remove the need for silicoln. The box has increased in size so that other sensors can be added, also tie wrap points have been added for batteries / other electronics. The aerial is now…

Downloads
378
Likes
55
Rating
5
P
PrintablesIvan Ignáth

Heltec V4 case with GPS, 18650 and switch

Case for Heltec LoRa32 V4 - https://www.aliexpress.com/item/1005010609328381.html GPS module simple antenna 18650 battery (soldered leads) mini slide switch https://www.aliexpress.com/item/1005005508763350.html Inspired by…

Downloads
372
Likes
48
Rating
5
P
PrintablesMDHR

Heltec V3 Meshtastic Case (1x 18650) with rocker buttons

*This is a work in progress. Context: I was looking for a case for the Heltec V3 LoRa board to use with meshtastic, and I had pretty much determined the cases by @tonyg were the best option, but I wanted one that could be more weather…

Downloads
371
Likes
38
Rating
0