262 models
Added the Echoverse Watermark to the Box lid. This is a Multicolour Single Extruder 3mf and BGCODE file. The Sigil is 0.6mm high so there are 4 colour swaps needed. Extruder 1: Black Extruder 2: Black/Purple dual colour PLA (eSun)…
Print approx. €5.40–€6.60 excl. taxPreliminary estimate for one variant
This is a small sport hovercraft that is simple to build and decently fast and agile. Materials: 2x 1407 brushless motors 2x 15a brushless ESC 2x 3in prop 1x 9g servo 1x at least 2ch receiver 1x battery connector(I used an xt30) 1x 3s or…
Introducing my new hovercraft print, powered by a balloon! This model is made up of two parts: the hovercraft itself and a screw with the balloon attached (you need a ballon). To inflate the balloon, simply blow it up through the screw.…
This is a large speedy and nimble hovercraft that is relatively easy to print, with next to no support material (≈50g of support). All parts are made so they can be printed on an Ender 3 or simular sized printer. The hovercraft is 580mm…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
Remix from: https://www.printables.com/model/333283-simple-brushless-rc-sport-hovercraft
Hovercraft compatible with standard Lego or Lego Duplo bricks Complete your Lego or Lego Duplo collection with a new vehicle - a hovercraft! And print a cute toy for your children's - for example to make regular bath visits more fun :)…
Viih's Encoder Mount is needed! https://www.printables.com/model/934160-ffbeast-encoder-assembly The case and the motor mount is recommeded to print in PETG or ABS (warp warning) The orientation of the models are not the best to print,…
A simple balloon driven hovercraft, with large lip on the balloon tube to hold the balloon more securely. #Edit# I've started tweaking this in various ways. Version 2 now has separate directional fins that can be pressed in and aligned to…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
There are two different solutions here, a geared solution and a belted solution The gear solution worked well for me originally but turns out my motor wasn't fully concentric so the gears would fail to mesh and lose encoder steps causing…
Support only needed for the Motorpod! Screws: 4x M4 x 25 V2A / 2x M5 x 16 V2A / Inserts: 2x M5 https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307
This is a project for a direct-drive sim racing steering wheel base enclosure using a hoverboard motor and an ODESC Mini. This is my first project using FreeCAD, and I essentially learned it during this project. The project is mostly…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Hoverboard motor holder. Set up for testing drivers, regulation, or just for regular work with motors. Really stable just as it is or it can be fixed with clamp to the table. No support needed nonprinted parts: 4xM8 nuts upper part from…
What is it? The is a hovercraft designed to be compatible with pup toy figurines from the popular children's series Paw Patrol. Big Version - Designed to fit all pups. Small Version - Fits the movie version of the pup (seen photo)…
This project creates a fully functional RC hovercraft that glides over various surfaces , powered by electric motors and controlled via a standard RC transmitter . You can find the assembly guide in files. more at my Github . 1 main_body:…
this model used L backet for holder and more compact,economy and robust
Full Build & Test hover video on Youtube: https://youtu.be/9EQT3OMNZYU Parts list: Electronics: 2x Drone Motors - Option 1 1507 3100kv: https://s.click.aliexpress.com/e/_c3gcpdFn * - Option 2 1606 3300kv:…
Modeled after the Air Skimmer I made in middle school, I decided to recreate the model in an easily printable and reconfigurable design using OpenSCAD. Modify the OpenSCAD code and tweak the settings as you like. The hooks are used for…
HoverBall Nested Cat Toy (Organic Support Test) I wanted to create a model that was fun for both the maker and their feline friends! This design is a set of hovering nested balls that highlight PrusaSlicer's (version 2.6+) new organic…
The Hovering Disk is a 3d printed device, which demonstrates almost frictionless motion. The air coming from the balloon is moving through a small whole to the bottom of the disk. At the bottom it is distributed all-over to all sides.…
This is two part case for the Hover X1 Drone with room for two additional batteries. Easy to print, just make sure that the cap is printed with the top down. Both STL files can be printed at the same time if you want both the top and…
Bolt this pulley to a standard 6.5″ hoverboard hub motor and connect it to something else with a GT2 timing belt.
Proyecto completo por si necesitais modificar alguna parte
This is a custom-built Direct Drive Force Feedback (FFB) system using a hoverboard motor. This build is using the OpenFFBoard by Ultrawipf https://github.com/Ultrawipf/OpenFFBoard. For the ESC I am using the Odrive S1. Encoder:…
Stand for Hover Mode Hot Wheels DeLoreon (https://smile.amazon.com/Hot-Wheels-Machine-Die-Cast-Vehicle/dp/B00Z3FACAK?sa-no-redirect=1). Made to look like the DeLoreon is taking off. Pegs sticking up will slide right behind the wheels into…
Altough I CNC milled this part from aluminum, it might be useful or even work when 3D printed. Re-used the original mounting bracket and screws of the hoverboard chassis. Used the hub motors for a robot project in combination with VESC…
Simply bolt it on an ordinary 6.5″ hoverboard hub motor and transfer the torque via a htd belt to drive everything you want.
Update: V2 removed the impossible to print overhang on the bottom. Simple, fast to print adapter piece for building a CD hovercraft. I remixed this, due to faster printing and less filament use. Simply glue it to a regular CD and you are…
I took a liking to this wheel case, and decided I'd correct the primary complaint other people had - the thin walls affecting printability. Print settings are the same as Jacob's original project, I would perhaps suggest using PCTG, as…
Wanted a bunch of tiny hover APCs to use playing Battletech so created these. Resin only as they are very small (you could print them larger as well but still not FDM friendly).
Custom Designed Wind Turbine - Version 1.1 12-24V The following description will help you understand the plans for my custom-designed wind turbine. The project is based on a hoverboard motor, which serves as the generator. Most of the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hello makers ! I would like to share with you the stl files that I modeled myself to make my RC hovercraft. It's really fun to use, it can do some nice acceleration and I had a great time making it. First of all I would like to thank…
I had this in the works for a while, but with so many cool releases of this helmet, I'd sort of lost interest in completing it. Not sure how accurate it is, but at the time it was as close as I could get based on the information…
See v2 which adds a couple different options and hopefully makes the Fusion 360 model easier to adjust with parameters here: https://www.printables.com/model/1326250-encoder-and-slip-ring-mount-for-ffbeast-wheel-v2 mount for the MT6701…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: This design is created for 6,5" hoverboard motor with magnetic encoder. At the beginning wheelbase was build around…
This is a Large RC hovercraft I designed because I wanted to use those cheap orange amazon motors(you know what im talking about) This should be printed as light as possible with 2 bottem layers and 3 top layers 2 walls and 5% infill. The…
A Pelican style case for my new Hover Air X1 Drone.
I found the GPS mounting point on the Canyon Grail's Hoverbar too low to reach while riding, so I designed this mount for the “flex zone” of the upper bar. *** New version for Garmin quarter-turn mount, 30 mm wide: thicker to make it more…
step file of hoverboard motor
bottom part should be 100% or at least the motor mount part back and front are the same as the original model
Description: The death star as hovering model for your desk. Through magnets with repulsive polarity, the death star is hovering above the stand. The diameter of the Sphere is about 100m. Printing settings: Please note that the modell…
This is part of building my own electric longboard. All startet with a old hoverboard I wanted to give a second chance….so I startet this project. I first disassembled the original wheels from the board and filed the axis rectangular…
This model is compatible with the lego system.
Hover Disk I present to you a functional balloon powered hover disk! Do you remember making a hovercraft out of CDs as a kid? Here is the future! This is a balloon powered hovercraft that works just like the CD version. Hovers for over a…
I used in combination with: https://www.printables.com/model/981504-hoverboard-ffbeast-openffboard-ffb-sim-wheel-encod/files
Ready to print ! 🖨 I have already cut the pieces to help you with the printing, be careful with piece 6 , you may have to modify it so that your foot can fit on the hoverboard. Use the references 📏 in this model you will find some…
This is a heavily updated version of the Spartas in hovertank mode. It incorporates improvements made when I put together the hopper mode and then makes some additional changes for aethestic reasons because “Anime magic” just doesn't…
Made a 70mm mount for the DD base from Hoverboard
kleines einfaches Kinderspielzeug
Here is a short demo of the street glider https://vimeo.com/659992058 Note: You will need a printer with at least a print area of 290mm x 280mm in X and Y. This is the bare minimum size. Perhaps I will design some split models in the…
First used the 28mm width which was not full width, it shifted to the side. Probably better to use the full width 35mm, and glue with something that will stick well to PETG.
hoverboard from the movie back to the futur with the deditable f3d file
This is a replacement for the original gimble protector which I decided was too large, too cumbersome and a distraction. Mk2 is minimalist but affords the same level of protection and movement stability. It remains within the footprint of…
Simple Mainboard Enclosure for the older style of hoverboards. Useful for building a Transpotter with 80 x 40 mm or 40 x 40 mm extruded aluminium profiles. 3 holes for motor and gametrak connection and one to fit the stock powerbutton.
Thanks to the original creator! I just scaled it down to fit my DeLorean and modified the strap to be able to print it. The DeLorean can be found here: https://www.thingiverse.com/thing:3146317 Print Settings Printer: anycubic i3 mega…
EN: Here is the encoder (MT6701) mount I designed for my FFBeast project. I printed it in PETG, 6 walls, 6 base/top and 45% infill for the spacer. Tried to do a design that I could easily check the gap and test without need to disassembly…
This is for the new (Oct 2024) HoverAir X1 ProMax. I only have this model so I don't know if it fits any other model they make. It is a tight fit because the drone cage is bigger than the top of the aircraft, so don't be slapping it down…
This model was fun to design based on my sons full size board, however it was frustrating to print (see the fails picture). I recently bought a PEI sheet for my build surface and it was until I recorded a failure that I spotted the…
-print horizontally you will need -you will need 2 8*22*7 bearings
This is my edit of this hovercraft. I used Tom Stanton’s model and upscaled it by 200%. I designed a custom skirt in SolidWorks and sewed it myself. 6S setup, gyro-controlled. Definitely the most fun model in my RC hovercraft collection.…
This is a disc brake adapter I used on the electric car I build for my kids. You can read more about this project here: https://www.martinsentech.no/index.php/2023/10/12/electric-pedal-car-for-kids/
I present the futuristic variant of the AirSurfer: the AirSurfer Hoverboard. It works just like my other boards, but rocks a new and more detailed style. And if you have an AMS, you can also explore adding some extra color to your board.…
This model is compatible with the lego system.
Superheroes - Iron Man Hovering Midair 3D printable model.
Short run video: https://www.youtube.com/watch?v=K17ALo4rEuw Only the second run, getting the hang of steering. This is not full throttle as I'm still learning to keep it going straight. Another favorite toy of mine was the Typhoon…
This 3D model of a cup of noodles with chopsticks suspended in mid-air was a project I’ve been wanting to bring to life for quite some time. Featuring a design with four distinct colours, the painting process was a bit time-consuming but…
Stance-system offers an assortment of drivers, each with a different height, along with replaceable performance tips, to optimize a Beyblade to the blader's needs. This kit also includes most of the parts to build the remainder of the…
Hi! This is a track system for a hoverboard motor. I used ABS for most of the parts, and TPU for the road pads for more grip. (white parts). I have an hour or so of run time on it and it has held up well. It uses 2 mm steel rod for the…
TPU folding book style carry case for HOVERAir X1 Combo Drone package. This fits the drone snugly and one battery as per the Combo package. It's been designed for safe carry and use while out and about – hence TPU and hence not including…
This is a, light-weight minimalist protective rubber boot for a HoverAir X1 ProMax. The X1 ProMax is a small folding drone that conveniently slips into a large pocket, so pointless having a large and heavy storage box (as supplied with…
Designed this for an etrike project and needed a mount for the 6.5" hoverboard hub motor I was using. This was printed at 80% infill with 2mm sidewall and top/bottom, with petg printed with side down. This might be overkill and you might…
To see how it works check out this video: The printing requires no special precautions, it works great with PLA. The inflator is best printed with the thick part on the plate. No support required. Please note the following tips: Use the…
These very cool breathers fit perfectly well in addition to aTank Trooper Helmet. Sorry Helmet is not available here on Thingyverse All credit to Geoffro for creating the Tank trooper Helmet which can be found here.…
Remix from : https://www.thingiverse.com/thing:4722151 Print Settings : Supports: No Resolution: 0.2 mm ------ Happy Print to the whole community :)
I've been dreaming of owning a hoverboard since I was a kid. Well, this one you can't ride, but it's a start ! VIDEO TUTORIAL [EN,DE,ES,FR, sub] Buy the components: https://jeje-linge.fr/en/products/le-vrai-hoverboard-1
Intro: These are the rear tyres developed for the Breezebuggy outdoor play car (Paid model), but they can probably be used in other applications where hover board motors are desirable. The size allows for good volume to incorporate some…
Come support these models over on Patreon Buy my time, Not my models. Easy to print LCVP Higgens air cushion hovercraft, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The door…
These are a pair of rear tyres modeled for the Breezebuggy rideon playcar (paid model) that fit standard 6,5" hoverboard motors. The tyres might come in handy for robot projects or similar that uses hoverboard motors and need some extra…
Adapted RC hovercraft by Snowman to EDF 64. Please check his excellent details and video for more information. These are only the changed parts to fit EDF 64 instead of 70. REMARK: not tested. Waiting for parts. If you are brave enough to…
Iconic Movie Props - Back to the Future 2 - The Hoverboard - 1989
This is a great design that doesn't take a lot of time print. Added handles and text.
This is a waterbottle-sized heli/mono/uni-copter designed to hover in the air at the spot it's first deployed. As opposed to vectoring the propellers to provide directional motion, the center of mass located in the pendulum is shifted…
To be added 10mm mounting holes Layer height: Up to you Walls: I would say at least 3 Infill: 15 - 30 % should be fine (more cant make it worse) I use ender 3 V2 with CR-touch and octoprint with GST3D filament
R/C hovercraft with parts that can be printed easily, and mostly without supports. The hovercraft will require some basic assembly work. Below, you'll find the list of parts required, as well as some assembly instructions and some…
This is a simplified, non-transforming low-poly model of the Southern Cross Spartas in hovertank mode. I'd always wanted one of these but we never really got good representations as models or toys apart from the Matchbox version which…
This is a foam/3d printed RC hovercraft. I will include links to all the electronics below. I included the .step files of the skirt and of the foam pieces so that you may take the dimensions and cut them out yourself. I did not purchase…
A Hovering Head. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
I didn't like that I couldn't steer the original machine without it moving forward. I made these parts to fit the existing base and used a VTail mixer to get them to work properly together. With this setup I can spin 360 degrees with…
This is a replacement housing to make a toy drone fly again. It works and has been tested by the children for its robustness;-) The drone's lights look even better than the original black one. The original folding mechanism to convert the…
This 3D-printed tyre is designed specifically for hoverboard motors to improve the speed. The tyre is printed without needing an inner tube. The design is optimized for strength and stability, but keep in mind that 3D-printed tyres wear…
Base angulada para base de direct drive com motor de hoverboard
Stance-system offers an assortment of drivers, each with a different height, along with replaceable performance tips, to optimize a Beyblade to the blader's needs. This kit also includes most of the parts to build the remainder of the…
