Search results: icr

Sort order

8,794 models

P
PrintablesMaple DIY

Build Plate Cleaner Microfiber Holder

Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…

Downloads
51,939
Likes
18,266
Rating
4.95
P
Printablesmmurase00

SD/MicroSD card case

(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi Print instructions Added a tray with 1 SD and 7 microSD slots. It's not as well-tested as the 2SD/5uSD tray; the uSD slots might be tighter.…

Downloads
40,463
Likes
11,391
Rating
4.46
P
PrintablesFH

MicroMax - SD card grip

In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…

Downloads
12,650
Likes
4,206
Rating
4.69
P
Printablesnerdpersonthing

Hinged SD / microSD Card Box - Gridfinity compatible, latching, print-in-place

A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…

Downloads
7,542
Likes
1,815
Rating
4.84
P
PrintablesRapterron

SD & Micro SD - Card Box (for 11 x SD & 16 x microSD) print in place

Remix from the awesome print in place "Hinged Sd & Micro SD Card Box - 16 Slots - All In One Piece by 8u9o" https://www.thingiverse.com/thing:3611322 Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…

Downloads
7,169
Likes
1,100
Rating
4.94
P
Printablescodysechelski

Gridfinity SD Card, MicroSD Card, and USB Stick Holder

Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks

Downloads
6,848
Likes
825
Rating
4.78
P
PrintablesTom

Micro-SD Card Case

This is a micro-SD card holder for 18 micro-SD cards. A save place for a lot of data ;-) It is a smaller version of my popular SD-card holder: https://www.printables.com/model/69096-sd-card-case After printing you should screw the jar and…

Downloads
6,796
Likes
1,118
Rating
4.89
P
PrintablesMateo Van Damme

(Micro) SD Card Holder 2

Holder for Micro SD Card Holders. The last edition relied on a friction fit which led to issues on other printers. This time I have completely redesigned the model from the ground up to use springs instead. This means that the tolerances…

Downloads
6,087
Likes
737
Rating
4.85
P
PrintablesLudvig Broomé

Micro Servo 3D Model (STP)

3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.

Downloads
6,016
Likes
55
Rating
5
P
PrintablesDave

Steam Deck Carrying Case Insert With Stand (EU Plug + MicroSD)

I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…

Downloads
4,318
Likes
592
Rating
4.66
P
PrintablesE3D

Prusa Mini+ Upgrade (Edition 2) Revo Micro

MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…

Downloads
4,203
Likes
762
Rating
4.91
P
Printablesc00lrunnings00

Micro SD BOX

I was looking for a place to store my micro SD cards + adapter and came across the design of "bgill". Unfortunately only for micro sd cards without adapter. So I made a remix based on bgill's design.…

Downloads
4,120
Likes
459
Rating
4.81
P
PrintablesCADScott

Slimline Sliding Micro SD Card / SD Card Holder - Multiple Sizes

UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter. This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that…

Downloads
4,095
Likes
662
Rating
4.79
P
PrintablesNeevoet

Adjustable Microphone Arm

Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…

Downloads
3,972
Likes
751
Rating
4.88
P
PrintablesAdam Kimmerly

Mini Microphone for QMX, (tr)uSDX, uSDX, KX2, and KX3

BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…

Downloads
3,843
Likes
289
Rating
4.87
P
PrintablesKT3Dprint

Micro disc gun (Easy, quick, print-in-place)

Micro Disc Shooter This is a travel prefect, print-in-place micro disc shooter. It measures about 5 × 3 cm (2 × 1.2 in). With the disc clipped in place, it slips easily into your bag—always ready for a quick game or a fun challenge. How…

Downloads
3,789
Likes
393
Rating
4.96
P
PrintablesBuzzKillBillZ

Recreator3D Micro Plastic Shredder

Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…

Downloads
3,685
Likes
1,028
Rating
4.45
P
PrintablesKimframes

SD/microSD card holder

Credit card sized SD and microSD card holder. 15 Jan 2021 update added SD only and microSD only holders added stackable versions of all holders 24 Jan 2021 update minor design tweaks 3mf file added

Downloads
3,559
Likes
661
Rating
4.78
P
PrintablesStenly_G

V8 Engine Block Pen Holder (USB, SD, microSD)

A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…

Downloads
3,518
Likes
813
Rating
4.88
P
Printablesscottg

Micro Mini 13 Jointed Action Figure

As small as I could go with functional, working ball joints. Fused the armor and frames together except for the interconnecting, moveable joints. 0.12mm layer 2 walls, 50% infill Auto tree support, build plate, critical Print time <45min…

Downloads
3,294
Likes
316
Rating
4.33
P
PrintablesDrJones

micro-gear fidget ring

I finally tried out my 0.2mm nozzle and made a fidget ring for it. This one is all-day wearable just like a normal ring - at least I found it to be; it does have quite some thickness, and you might find that still comfortable or not. If…

Downloads
3,222
Likes
621
Rating
3.88
P
PrintablesSedak

SD || MicroSD card case

| BASIC DESCRIPTION | it is a remix of a model found here: https://www.printables.com/model/20415-sdmicrosd-card-case https://www.printables.com/model/23326-sdmicrosd-card-case-snap-fit this remix has 8 slots for microSD, and one for the…

Downloads
3,170
Likes
441
Rating
4.76
P
Printablesauc7us

Microbot Fidget

The Microbot Fidget is based on Hiro's Microbot from Big Hero 6 Both the parts snap fit together. Print details: Material Used : Prusament PLA Prusa Galaxy Black Layer height: 0.15mm Supports: N o Brim: Yes (Only for vertically printed…

Downloads
2,963
Likes
719
Rating
4.55
P
PrintablesMaOl

USB, SD, MicroSD holder

This holder can hold up to: 14 USB-Sticks 5 USB-Stick Lids 8 SD-Cards 10 Micro-SD-Cards 6 USB-C Adpater (Micro USB to USB-C) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 15%…

Downloads
2,824
Likes
361
Rating
4.78
P
Printablesnoamf

Dell Micro 1U Rack Mount

This is a remix of a 1U rack mount solution for Dell Micro computers that keeps both computers the same orientation. It should work for all variations of the Dell Micro computer (if in doubt, the computer measurements are 182mm on the…

Downloads
2,803
Likes
213
Rating
4.69
P
PrintablesEkyz Lopez

Micro SD Box Case

Compact MicroSD Card Holder for 3D Printing Keep your microSD cards organized and secure with this sleek and compact storage box, designed specifically for 3D printing enthusiasts. The minimalist design ensures it fits effortlessly in…

Downloads
2,709
Likes
708
Rating
4.64
P
PrintablesMarius

Gridfinity SD Card Holder (MicroSD Usb A and C)

This is basically what Zack mentioned in the video. I attached the Fusion360 file so you can go nuts with it. This upload contais a 1x3 and 1x2 Model. Update 2023-01-04: Added versions without the magnetholes in the bottom, because its…

Downloads
2,694
Likes
376
Rating
4.9
P
PrintablesTimPrints

Dell OptiPlex 7060 MicroPC 10 Inch Rack Mount

This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…

Downloads
2,679
Likes
179
Rating
4.88
P
PrintablesOcelotzlasu

Micro Dice Tower (Blank, DnD, CoC)

A small (about UNO cards stack sized) dice tower with dice tray included. Both parts print without supports and use about 70 grams of filament. HIGH ROLLS GUARANTEED* The tower can fit a whole set of standard dice for storage. Put on the…

Downloads
2,671
Likes
549
Rating
4.91
P
PrintablesAlex gridgeman

Spartan USB&Micro SD Holder-REUPLOAD

this isn't mine and this is my first reupload so if I have broken rules or etiquette please let me know :) I just wanted to reshare to get the hang of it and honor this great print that I'm yet to print in marble sadly. everything is the…

Downloads
2,550
Likes
608
Rating
5
P
PrintablesChrlee

Modular stand for electronic microscope

This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…

Downloads
2,439
Likes
361
Rating
4.94

16 + 16 SD microSD card holder

A case for up to 32 memory cards.

Downloads
2,309
Likes
397
Rating
4.56
P
Printables3DP-MAMSIH

EVA 3.0 E3DV6 - REVO - REVO Micro ( Hotends ) Mount

18/08/2022 step file uploaded New face fan cover 13/05/2022 V6/ REVO V6 heat set inserts added 1 st Big Thanks to EVA designer for this big effort and nice design for EVA 3.0 Link to EVA 3.0 HERE ! 2 version Standard E3D V6 / REVO V6…

Downloads
2,294
Likes
180
Rating
4.67
P
PrintablesDJMac

Toy Microphone (Multiple Designs)

Kids love to sing and these toy microphones can add to the fun. Another optional for use is the tried and true "whomever holds the microphone gets to speak, while others listen". And of course, there's always the classic "drop the mic"…

Downloads
2,272
Likes
79
Rating
5
P
Printablesidenny1

Gridfinity Micro SD card holder 1x1x3 (added step file)

This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.

Downloads
2,243
Likes
206
Rating
4.76
P
PrintablesMr.Nobody

Micro SD Box Case

This Micro SD card box has space for the supplied adapter and is a remix. Left is the Original and right ist mine remix. The left-hand corner of the lid has been widened to make it easier to open the box. Print Settings: You need to use…

Downloads
2,238
Likes
522
Rating
4.38
P
Printablesscooter_magavin

USB, SD card and Micro SD card storage holder for the honeycomb storage wall HSW

I created a USB, SD card and Micro SD card storage holder for my Honeycomb storge wall. I recently made a version 2 of the stl file. I made a couple of changes to the SD card opening so the cards would fit better. I also made the depth of…

Downloads
2,226
Likes
361
Rating
4.82
P
PrintablesCB4D

Microlab - Mini Modular Home Server Rack

Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…

Downloads
2,132
Likes
947
Rating
4.94
P
PrintablesBobbyThunder

Efficient SD Card Case (Hold 11 SD cards + 8 Micro SD - Under 50g Filament)

I made this case to hold 11 full-size SD cards and 8 micro SD cards in a small, rugged case that uses less than 50 grams of plastic total. I added knurling and grip to both parts to make opening and closing easy. I recommend alternating…

Downloads
2,110
Likes
336
Rating
4.88
P
PrintablesFireDog

Microphone Voucher Box / Mikrofon Gutscheinbox

Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…

Downloads
2,092
Likes
110
Rating
4.95

M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets

Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…

Downloads
2,074
Likes
56
Rating
3
P

Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…

Downloads
2,073
Likes
387
Rating
4.86
P
Printablespawel50

Nano SIM to Micro SIM adapter

Tested on 3 different cards and 3 different phones. Note: The thinnest part has 0.8mm, consider this to adjust nozzle and line width.

Downloads
1,976
Likes
42
Rating
5
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Downloads
1,957
Likes
270
Rating
5
P
Printablesm3x

uConsole micro antenna 0.2 mount

external micro antenna mount for uconsole

Downloads
1,945
Likes
99
Rating
5
P
PrintablesSzymon Adamczyk

F-16 Fighting Falcon print-in-place micro jet fighter

About the F-16 Fighting Falcon The F-16 is an american single-engine supersonic multirole fighter developed by General Dynamics for the US Air Force. It was designed as an air superoirity day fighter, but evolved into a succesful…

Downloads
1,914
Likes
137
Rating
4.88
P
PrintablesUdenjpg

BBC Micro:Bit V2 case

Micro:bit case for the second version of the board Supports the new features of the card: - microphone - speaker - Touch logo Remixed from https://www.thingiverse.com/thing:3028078 and https://www.thingiverse.com/thing:3511591

Downloads
1,852
Likes
63
Rating
4.64
P
Printablesmkuiper

Micro SD card holder

How easy is it to loose micro SD cards? Here is a simple, screw top, micro SD card holder which can hold up to 24 cards. This is a re-design is inspired from bgill's micro-SD cardholder, adding a circular arranged slots, textured grips on…

Downloads
1,845
Likes
182
Rating
4.79
P
Printabless7emar

Gardena Micro-Drip-System Connectors

For easy branching and connecting of the 4.6 mm Supply Pipe or 4.6 mm Drip Irrigation Line. ------ I printed with these settings: Resolution: 0.15 Supports: Yes Infill: 20% Rafts: Skirt Filament: PolyMaker PolyLite PLA Pro Grey

Downloads
1,804
Likes
790
Rating
4.67

Desk Organizer/Stand/Holder for USB-C / USB-A / SD-Cards / Micro-SD Cards

This stand/holder contains 4 different slots: 3x SD-Card 6x Micro-SD 9x USB-A 12x USB-C Print Settings: Matte PLA 210 degree print temp 60 degree bed temp 0.4 Nozzle 0.12mm Layer Height

Downloads
1,797
Likes
543
Rating
5
P
PrintablesDutchDeveloper

Dell optiplex 340 Micro Rack Mount

This Dell Optiplex Mount is a versatile and compact solution designed to securely mount a Dell Optiplex 340M Desktop Computer to a 19" server rack. its design only takes up 1U of rackspace and allows you to mount 2 of them next to…

Downloads
1,793
Likes
169
Rating
4.5
P
Printablesdaclasen

Skadis Holder for Wera Kraftform Micro Screwdriver

This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…

Downloads
1,779
Likes
410
Rating
4.9
P
PrintablesHexiBase

HexiBox Series: A25 Micro

As seen on X and YouTube: Designed for use with the Tang Band W3-1876 woofer, and the GRS A25-2T tweeter. Usable overall bandwidth of 50Hz - 16kHz in the nearfield; ideally against a wall. Tang Band W3-1876S 3" Subwoofer:…

Downloads
1,769
Likes
594
Rating
5
P
Printablesplog

HC-SR04 ultrasonic sensor mount for 9G micro-servo

Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…

Downloads
1,766
Likes
39
Rating
4.5
P
Printablesnazar-pc

Basic Micro ATX test bench

Source code (designed in SolveSpace): https://github.com/nazar-pc/matx-open-test-bench It only has motherboard tray and support for 4 expansion cards. No I/O shield or anything else, has cut-out on the back for easier cooler and back SSD…

Downloads
1,757
Likes
137
Rating
5
P
PrintablesSean Liang

DNA Grow Tower for Microgreens and Plants

I designed this DNA-shaped growing tower for my students. It is a multipurpose, modular growing system that can be used to grow microgreens or as a decorative planter that brings more greenery into a living space. I particularly like the…

Downloads
1,755
Likes
1,442
Rating
5
P
PrintablesGonzoStrange

Micro Mlok Handstop

Micro Mlok Handstop Uses standard mlok hardware Or as LayersForLife, LLC commented M4x12 or an M5x12 will also work if you are making your own mlok hardware. Category: Other

Downloads
1,713
Likes
155
Rating
5
P
PrintablesSteven La

Low Profile Microphone Arm

This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…

Downloads
1,701
Likes
1,154
Rating
5
P
PrintablesAdam L

CaliCross: A Handy Tool for 3D Printer Dimensional Accuracy

What this does Helps you correct XY print scaling issues methodically and repeatably instead of guessing or coarse whole-object scaling. Works for Z too (though this tends to be less of a problem with FDM printers). Gives you an easy way…

Downloads
1,689
Likes
190
Rating
5

SIM Card Micro -> Mini Adapter

This is a SIM card adapter that adapts Micro-SIM cards to Mini-SIM cards. This model is a remix of Jeřabina s adapter. It has tighter tolerances and thus may fit your card better. Therefore I also matched his license of this file. Print…

Downloads
1,676
Likes
58
Rating
5
P
PrintablesGFS

EDC Micro Knife - Keychain (Scalpel) + V2

EDC Micro Series. Compatible with each other. See also: EDC Micro Pill Capsule - Keychain EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II EDC Series Box Inspired by an idea Michel Bauer - Exacto knife keychain. Completely…

Downloads
1,612
Likes
453
Rating
4.89
P
PrintablesFabianVeile

Micro SD Coin

Hello, this is a two-piece coin that can hold a micro SD card. It has the dimensions of a 1 Euro coin (approx. Ø23.5 x 2.3 mm) and can be kept in your wallet or used on a keychain or necklace. For the last to options, it has a hole with a…

Downloads
1,605
Likes
356
Rating
4.67
P
Printablesleizer.design

Microscope Phone Holder

This is a 100% 3D printed phone holder for microscopes, designed to make capturing images and videos simple and precise. The mount allows smooth adjustment left, right, up, down, and forward and backward relative to the microscope lens,…

Downloads
1,595
Likes
94
Rating
4.75
P
PrintablesHexiBase

HexiBox Series: Tang Band W3-1876S MicroSub

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,575
Likes
191
Rating
4.83
P
PrintablesChris

SD and MicroSD card holder - gridfinity

Just a very simple SD and micro SD card holder that fits into a 1x2 gridfinity slot. Space for 10 SD and 16 micro SD cards. Added 13.09.24 - SD cards only - 15 SD cards.

Downloads
1,570
Likes
279
Rating
4.94
P
Printablesmygadgetlife

Micro Fidget Cube

Print in place with no supports, raft or brim. This cube is designed for 0.2mm layers, 0.4mm nozzle. Set the infill to 20-25%. If the print is fused, set flow to 90%. 4 top and bottom layers is sufficient. 1st layer adhesion is crucial…

Downloads
1,557
Likes
133
Rating
4.93
P
Printablescewo

Micro SD Card Wallet - less than 4 mm thick

Micro SD Card Wallet Holds 16 Micro SDs and 1 standard SD card. The tray contains the clipped in cards covered by a sliding lid. Dimensions: 58 x 99 x 4 mm Printing recommandations PLA 0.3 mm layer height 4 perimeters, arachne mode is not…

Downloads
1,556
Likes
201
Rating
4.93
P
PrintablesEmbrace Making

Creality CR-10 Smart Fan Adapter For MicroSwiss CR6-SE All Metal Hotend

IF YOU DOWNLOAD THIS MODEL, PLEASE TAKE 1 SECOND TO RATE OR LIKE IT… THAT IS ALL I ASK IN RETURN, THANK YOU. In this video I will show you how to install an all metal hotend kit on the Creality CR-10 Smart 3D printer. Currently, there are…

Downloads
1,544
Likes
69
Rating
5
P
Printableschrisebryan

Micro Crankbait Fishing Lure

To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…

Downloads
1,485
Likes
245
Rating
5
P
PrintablesGennady

MicroSD (Micro SD) cards case

It is difficult to open the case, perhaps the locking protrusion should be made 0.4 mm rather than 0.5 mm. The cards come in tight, they do not fall out of the case as in other models. In the photos, the model is printed from PETG, the…

Downloads
1,483
Likes
343
Rating
4.89
P
PrintablesTonyG

RAK19003-micro case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
1,473
Likes
185
Rating
4.91
P
PrintablesMarkus710

Rugged Box/Case (NO SCREWS) for SD and micro SD cards

Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it flat.

Downloads
1,467
Likes
227
Rating
4.75
P
PrintablesMicr0wave3

microRidge

I wanted a Ridge Wallet but it was too expensive for my cheap self. So I made one using resin on an Anycubic Photo. Used 2 rubber bands I found for my hair around 4-5 cm in diameter and of 3-5 mm thickness. Please find the .f3d and .3mf…

Downloads
1,464
Likes
577
Rating
4.87
P
PrintablesOllie7802

Millennium Falcon Microfighter Lego set to print

Found this made by someone in a facebook group, no stls so here you go. edit: as some people have mentioned, some parts are not to scale, please scale the tiny parts by 1000% This took me a while to put together so please feel free to…

Downloads
1,462
Likes
451
Rating
4.25
P
PrintablesSzymon Adamczyk

F/A-18 E/F Super Hornet print-in-place micro jet fighter

About the F/A-18 Super Hornet The Boeing F/A-18E and F/A-18F Super Hornet are a series of American supersonic twin-engine, carrier-capable, multirole fighter aircraft derived from the the McDonnell Douglas F/A-18 Hornet . The Super Hornet…

Downloads
1,444
Likes
120
Rating
5
P
PrintablesPhazeShift

Dell OptiPlex Micro Under-Desk Mount

This 3D-printed mount is designed for Dell OptiPlex Micro PCs with the following dimensions: Depth: 178 mm Height: 182 mm Width: 36 mm This should cover most, if not all, of the OptiPlex Micro Models. I designed & tested it on a 7000…

Downloads
1,412
Likes
99
Rating
4.63
P
PrintablesLaisch

ASW20 Sailplane (micro glider - flyable)

This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…

Downloads
1,399
Likes
151
Rating
5
P
Printablesshibafactory

Nintendo Switch Kickstand / MicroSD cover (Improved)

Nintendo Switch Kickstand / MicroSD cover (Improved)

Downloads
1,399
Likes
61
Rating
3
P
Printables3DSistem

Retro microphone

Use it as props, award or a simple decoration. For other half load one more model aside and miror it. Glue after its done. Print flat side down, no support, lightning infill for faster printing and material saving.

Downloads
1,376
Likes
82
Rating
5
P
PrintablesCoat

Micro ATX rack and measurements

A rack for a Micro-ATX board. Perfect fit for my Asus B550m motherboard. Since I had a little trouble to find the exact measurements for the holes, a table with these and a DXF with the holes are included. Measurements both in Inch and…

Downloads
1,369
Likes
75
Rating
5
P
PrintablesHP Robots Otto

Micro:bit biped robot

How about using the popular micro:bit to make a Otto robot? this is how this robot came to life combining to great platforms and adding more articulations to create a new member of the Otto family. This a remix of the original Otto robot…

Downloads
1,365
Likes
90
Rating
5
P
PrintablesPrintP

VW T1 Bus Pickup Pen / Desk Organizer USB SD microsd

VW T1 Bus Pickup Pen / Desk Organizer USB SD microsd

Downloads
1,360
Likes
315
Rating
4.69
P

Microjig Matchfit Dovetail Fixture Bits + Knobs

The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…

Downloads
1,350
Likes
279
Rating
4.75
P
Printablesmavu

Micro-servo (SG90) round mounting plate

I made this mounting plate for a micro servo because my 9G servos didn't have the disc mount which was used in this robot arm model ( http://www.thingiverse.com/thing:1684471 ) It fits my "Tower Pro" SG90 micro servos, which have 20 tiny…

Downloads
1,334
Likes
49
Rating
5
P
PrintablesRyan1705

Sleek Microphone Stand

Hey all! This is my custom Microphone stand I designed as I bought a microphone that came without a boom or a stand. It should fit most standard shock mounts (refer to the second picture). Do print with a fairly high infill for strength,…

Downloads
1,309
Likes
145
Rating
5
P
Printablesrayjizza

GAMER case for BBC MICROBIT

Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…

Downloads
1,290
Likes
118
Rating
4.88
P
PrintablesFindusdwarf

SD Card & micro SD Card Box with USB Stick Holder

March 05, 2021 This is a stackable box with drawers for SD and micro SD cards, optional with a USB stick holder as top plate. You can stack together as many drawer modules as needed to create the complete box.…

Downloads
1,282
Likes
272
Rating
4.55
P
Printablestomy983

Gridfinity SD Card, MicroSD Card, and USB Stick Holder. Now also with USB-C support

Holds: 7 (+ 4) MicroSD Cards 4 Standard SD Cards up to 9 USB-A Memory Sticks depending on size 90 degrees, angled or mixed configuration Added files for another version that also supporting USB-C this second version holds: 7 (+ 4) MicroSD…

Downloads
1,281
Likes
113
Rating
4.7
P
PrintablesJOAMON

USB, SD & Micro SD Holder - Fully Customizable

Design Background: I needed a USB hub for 10 USB drives, 5 SD cards and about 10 Micro SD cards. I searched for one that fit my needs but couldn't find a perfect one. The designs online either had excess number of slots or had a shortage…

Downloads
1,237
Likes
115
Rating
4.91
P
Printablesscross01

Slim Micro SD Card Organizer

Redesign of a simple micro SD card organizer, based on the original MicroSD Card holder by FritoBandito. Created a new model in Autodesk Fusion 360. Redesigned the slots for easier card removal. Print with 0.2mm layer height

Downloads
1,233
Likes
164
Rating
5
P
Printablesthenickdude

Microscope adapter for 2x macro photography with Sony A, E/FE, Canon EF/EF-S, M, RF, Nikon F, Z, Fuji X, Fuji G, M4/3, Pentax M42 cameras

When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…

Downloads
1,225
Likes
300
Rating
5
P
PrintablesFPV GEEK

18650 Micro Foldable FPV Drone

This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes. The frame is entirely 3D-printed and incorporates a unique folding mechanism for easy portability. The drone…

Downloads
1,216
Likes
1,219
Rating
5
P
Printablesmgg gg

Estuche MicroSD

Estuche para guardar tus tarjetas micro SD y que no se te pierdan.

Downloads
1,212
Likes
345
Rating
4.8
P
Printablesbaldsealion

Steam Deck + Dock Carrying Case Insert US Plug (two MicroSDs Slot)

Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…

Downloads
1,186
Likes
131
Rating
4.67
P
PrintablesJascha3D

Rugged MicroSD Card Case

Durable and practical storage case for MicroSD cards and adapters This rugged MicroSD card case is designed to keep your storage media organized and protected from dust and sand . It is ideal for safely transporting or storing MicroSD…

Downloads
1,185
Likes
175
Rating
4.8
P
PrintablesLaisch

Micro Pistol Crossbow (Reverse Compound)

Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…

Downloads
1,177
Likes
829
Rating
4.5
P
PrintablesNiklas

Gardena Micro-Drip 1/2" - 13mm Connectors

Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…

Downloads
1,141
Likes
348
Rating
5
P
PrintablesSzymon Adamczyk

F-35 Lightning II print-in-place micro jet fighter

About the F-35 Lightning II The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, supersonic stealth strike fighters. A multirole combat aircraft designed for both air superiority and strike missions,…

Downloads
1,140
Likes
106
Rating
4.83
P
PrintablesBranden

TinyMiniMicro 10" Rack Mount

Background There are several 10" rack mounts for these TinyMiniMicro PC's, but none of them quite sat right with me. My goals for this were the following: Conform to the un-official 10" rack dimensions seen here (254mm x 44.45mm). PC Is…

Downloads
1,133
Likes
403
Rating
5
P
PrintablesXeno

MicroSD Card Wallet

MicroSD Card Wallet by aerobatflyer is licensed under the Creative Commons - Attribution - Non-Commercial license.

Downloads
1,110
Likes
392
Rating
4.83