Search results: insulation

Sort order

126 models

P
PrintablesPIZZA_CAT

HOOD NOISE INSULATION CLIP FOR VOLVO CX70

Hood noise insulation clip for VOLVO CX70. The representative of the wonderful Swedish car industry is crumbling before our eyes. Several clips attaching the trim to the hood just fell apart in my hands. This time I'm saving the…

Downloads
156
Likes
42
Rating
5
P
PrintablesNEMATEQ

Cable Section Tester – Metric mm² (Including Insulation) | Testeur de Section de Câble – mm² (avec gaine)

Description – English This 3D printed cable section tester lets you quickly identify the cross-sectional area of electrical wires in metric units (mm²) , including the outer insulation . Designed for electricians, makers, and DIYers who…

Downloads
72
Likes
7
Rating
0
P
PrintablesFabrigator

Fabrigator Can Holder (With Insulation Region)

Working on this for the contest. Rather than pouring water through a funnel just unscrew the top. Added feet to the bottom so that the surface area in contact with bottom surface is lowered. Planning to add a cap opener to the bottom as…

Downloads
8
Likes
2
Rating
0
P
PrintablesHugoWhite

Pipe Insulation (Lagging) Cutting Tool – 11 Sizes

Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…

Downloads
5,196
Likes
2,743
Rating
4.85
P
Printablesbuchnema

Pipe Insulation / Lagging Cutting Jig

With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…

Downloads
3,188
Likes
825
Rating
5
P
PrintablesLeapTechOnline

Pipe Lagging Insulation - Template Jig - Cutter - 15mm 22mm 28mm

A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…

Downloads
1,871
Likes
642
Rating
5
P
PrintablesDrTob

Insulation Wall Plug / dowel - Dämmstoffdübel

dowel for styrofoam insulation. No pre drilling needed. prints without support in 0.2mm layer hight Installation: Screw wall plug into non-plastered insulation material without pre-drilling with an electric drill or screw driver and T30…

Downloads
1,230
Likes
292
Rating
4.88
P
PrintablesFagge

Pipe insulation cutting jig

Printed with only 3 walls & 5% infill and 0.25mm layer height. Print time 2.5h The opening allows several pipe dimensions to fit, as it is flexible enough to clamp to a smaller size. Edit… Added a model with, internal chamfer, so as not…

Downloads
555
Likes
88
Rating
5
P
PrintablesJohannes

M6 screw anchor into foam insulation

print with petg and use a drop of adhesive of your choice to combine a pair.

Downloads
555
Likes
64
Rating
5
P
PrintablesRuben Meiracker

Sound insulation panel

Check out version 2 made out of hexagons https://www.printables.com/model/1194006-sound-insulation-panel-v2

Downloads
538
Likes
143
Rating
4.33
P
PrintablesKackos

Geometric Shaped Wall Panel With Empty Back for Sound Insulation

Mount with double sided tape or similar method Default Scaled model is 0.41in deep wall panel for decoration, can be used used as sound diffusion panels with foam backing. In cura, in the rotation tool select align face to build plate and…

Downloads
511
Likes
98
Rating
4.67
P
PrintablesSimonEngel

Clip Engine Insulation Mat (Seat, Audi, VW, Skoda)

Replacement clip for securing the engine insulation mat to the hood. Fits for Seat | Audi | VW | Skoda Print laying with supports enabled. PETG is recommended due to heat stability. There is now also a improved version, wich has much…

Downloads
474
Likes
56
Rating
0
P
Printablesfbeltrao

Mellow FLY MiniAB / BTT Piggyback36 insulation mount plate with cable strain relief

This is my take for the insulation and mount plates for the Mellow Fly MiniAB or BigTreeTech Piggyback36 boards. There are two models available, one which the stepper mount holes sits horizontally, typically for Sherpa Mini, and other in…

Downloads
365
Likes
45
Rating
5
P
PrintablesNoExpert

Beer Can Cooler (with air pockets for insulation)

Keep it Cool with this Can Cooler It's getting warm outside and I wanted to enjoy a nice cold beer in the workshop. It happened multiple times that my beer or lemonade got warm after a short time so I made this can cooler to see if it…

Downloads
304
Likes
43
Rating
5
P
PrintablesMatthias

Insulation wall plug (for (plaster covered )insulation plates)

I designed this model to mount lightweight things (lights, wall plugs, thermostat sensor,…) to the outdoor walls of my house. The brick walls are covered with insulation plates and plaster, which makes it very difficult to securely screw…

Downloads
282
Likes
51
Rating
5
P
PrintablesPavel Janeček

8E0863727A VW Hood Insulation Pad Clip

About model My custom design of Hood insulation Pad Clip for VW Cars. This was made for Škoda Fabia II FL (2012). Size: 25x20x17mm Compatibility VW carmakers brands Modifications I optimised original VW design like so: Clamp has better…

Downloads
272
Likes
26
Rating
5
P
PrintablesNickH

Hood insulation clip Seat/ VW

this clip is a replacement part for the hood isolation clip for Seat/ Volkswagen cars Seat Leon hood clip

Downloads
268
Likes
16
Rating
5
P
PrintablesFrank 3D

Pipe Insulation Cutting Template

Pipe insulation cutting template….not sure what else I should say. Enjoy! Designed in Solidworks

Downloads
254
Likes
48
Rating
5
P
PrintablesRuben Meiracker

Sound insulation panel v2

Can be mounted with double-sided tape

Downloads
239
Likes
76
Rating
5
P
PrintablesJiri Blazek

Tools for cutting insulation

Cutting insulation tube for 45° angle and mortise

Downloads
232
Likes
81
Rating
0
P
Printables3Dmac

Voron 2.4 Z Drive insulation

Instructions: Print the shrouds as-is, with voron settings (4 walls and 40% infill). The caps are placed flat on the buildplate. Print the bottom cap 2 times. The shrouds need a hammerhead t-nut (4 total) and one m3 8mm (4 total). To…

Downloads
232
Likes
85
Rating
5
P
PrintablesRostaP

Electrical installation box for insulation.

Set for installing electrical sockets, switches, or lights in insulation. Electrical installation box for insulation. The base is 220 mm and has grooves for shortening. The weight is approx. 125 g (you can adjust the size in the slicer…

Downloads
224
Likes
17
Rating
5
P
PrintablesBacchus258

Volvo Hood Insulation Clip

This is a simple print-at-home clip to replace Volvo part # 9182822 - hood insulation clip. This clip is not only used to hold the insulation to the underside of the hood on a Volvo but also to hold the engine splashguard in place to make…

Downloads
207
Likes
28
Rating
0
P
Printablessimonek012

Electrical installation box for thermal insulation / elektroinštalačná krabica do zateplenia

Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…

Downloads
202
Likes
19
Rating
5
P
PrintablesAvi Awgan

Junction box for Foam Insulation | Puszka elewacyjna regulowana

Junction box for Foam Insulation | Puszka elewacyjna regulowana | 145mm - 180mm. I suggest using PETG

Downloads
197
Likes
6
Rating
0
P
Printablesradicalreel

Insulation plate and standoffs for BTT Piggyback36

Insulation plate and standoffs for Bigtreetech Piggyback36, for extruders like Orbiter, Sherpa ect. https://paypal.me/radicalreel Use heat inserts for the standoffs The 1mm gap between stepper and insulation plate is intentionally to get…

Downloads
193
Likes
19
Rating
0
P
PrintablesJoe

LagMaster - Parametric guide for cutting pipe insulation

Here's a Fusion 360 Parameterized model for making your own Lagging tool. To use this, you'll of course need to be running Fusion 360 and from there, all you need to specify is the diameter of your pipe insulation (in either metric or…

Downloads
191
Likes
16
Rating
0
P
PrintablesAlex Baev

BambuLab X1 Carbon (Thermal & Noise insulation BOX)

Thermal insulation, Noise insulation at your discretion The temperature inside the chamber when the table is heated +75 Celsius reaches +47 Celsius. Noise reduction - 37 decibels and below (depending on the types of vibration and noise…

Downloads
184
Likes
62
Rating
5
P
PrintablesJiK

Pipe Insulation Cutting Tool

Pipe Insulation Cutting Tool. I have used tree supports ... Its cutting mechanism ensures a clean and accurate cut every time, allowing for seamless assembly of insulated pipes.

Downloads
171
Likes
36
Rating
0
P
Printablesisyork

Hood Insulation Retainers Clips

had to replace the windshield spay nozzles on my 2014 Ram 1500. After removing the Hood Insulation Retainers Clips that are not reusable I found the Automotive clip for a Volvo and reworked it for my Ram. I used the overall dimensions…

Downloads
160
Likes
17
Rating
0
P
PrintablesGino Latrino

Clip für Heizungsrohr-Isolierung / Clip for heating pipe insulation

Gerade im Bereich von 90 Grad Verläufen sinnvoll. Silber ist das Original und blau der Druck. Ich empfehle PETG und eine Layerhöhe von .12 oder .16 mm . Keine Stützen nötig.

Downloads
155
Likes
27
Rating
5
P
PrintablesSTEM

insulation anchors, insulation fixings, insulation plugs (Dämmstoffdübel)

A 3D-printable dowel for fastening lightweight objects with screws to external thermal insulation systems such as EPS or Styrofoam façade insulation. Compared with similar insulation dowels, this version uses slightly steeper threads.…

Downloads
153
Likes
62
Rating
0
P
PrintablesJaMi

TEMPLATE FOR CUTTING INSULATION

ŠABLONA PRO ŘEZÁNÍ IZOLACE https://www.youtube.com/watch?v=nSeCnuHCYws

Downloads
150
Likes
6
Rating
0
P
PrintablesJohnRingo

Garage Door Insulation Clip

With the garage door insulation kit shown in the pictures, one clip gets bonded to the door, and the other engages it after being pushed through a hole in the insulation. The clips supplied in the kit can warp over time and disengage to…

Downloads
149
Likes
14
Rating
5
P
Printableswie_das_geht

KNIPEX 12 62 180 (insulation stripper) holder for IKEA SKÅDIS

Halte deine Knipex Abisolierzange stets griffbereit mit dieser speziell entworfenen Halterung für das IKEA SKÅDIS Pegboard. Dieses 3D-Modell bietet den perfekten Platz für deine Zange und integriert sich nahtlos in dein bestehendes…

Downloads
147
Likes
12
Rating
4
P
PrintablesKimmo Mäkelä

150mm Portable Air Conditioner Hose Adapter to 20mm - 35mm insulation board for attaching to a window

This is a a three part adapter for 150mm portable air conditioner exhaust hose. All of the parts screw together and only the hose adapter part requires support. Print settings Infill 15% Infill pattern Cubic subdivision / Adaptive cubic…

Downloads
141
Likes
12
Rating
0
P
PrintablesMarkuzzzi

Gridfinity Holder for KNIPEX Automatic Insulation Stripper

This holder for the gridfinity system is designed to store the KNIPEX Automatic Insulation Stripper (12 62 180) and have it easily retrievable. To the best of my knowledge, the models of JOKARI have the same dimensions, hence should fit.…

Downloads
129
Likes
27
Rating
5
P
PrintablesJack@KunWork

Chamber Heat Insulation for Qidi Q2

One of the main functions of Qidi Q2 is the chamber heating. However practically the heating efficiency is fairly low due to its thin plastic panels. Thus it also consumes a lot of electricity because of this especially if you have a long…

Downloads
112
Likes
61
Rating
5
P
PrintablesArne

Parametric Side Protection for Electrical Insulation Tape (OpenSCAD)

Parametric version of the electrical insulation tape side protection with added ribs.

Downloads
111
Likes
24
Rating
4.75
P
Printableslmatula

Unifi G3 flex camera wall mount to insulation

Unifi G3 flex wallmount adapter to use insulation dubel. you can use Fischer 50mm insulation dubel, or any other eqvivalent with utp cable fixing use standard ziptie

Downloads
110
Likes
20
Rating
0
P
PrintablesPedja

Clips for hood bonet insulation

Clips for Audi bonnet insulation. Printed with Bambu Lab PC, 100% infill. Version V2 wider clip for PC filament.

Downloads
109
Likes
7
Rating
0
P
PrintablesLinus Tech Tips

Fiber Insulation Wall Mounting Plates

Designed to hold fibre based insulation like rockwool onto walls for sound deadening. Originally designed to use a long #10 screw to screw through the insulation, along with an oversized #10 washer with magnet to affix duvetyne fabric to…

Downloads
105
Likes
43
Rating
0
P
PrintablesFlo

Sovol Zero Insulation Blueprint (Beta)

Just print out the templates onto A4 paper, stick them temporarily to the insulation, and cut out with a pair of (sharp) scissors. You'll probably need about three 300x300mm sheets for this one. If I also get to make a template for the…

Downloads
92
Likes
18
Rating
5
P
PrintablesRobert Friberg

Bambulab - Top insulation

I made this insulated “hat” for the X1C and the P1S printers to prevent to much heat escaping through the top glass plate when printing ABS. To be able to print this design it is split in several parts and designed to be assembled without…

Downloads
82
Likes
19
Rating
0
P
Printablestghc

Copper Pipe Lagging Insulation Cutting Jig

Copper pipe lagging cutting jig for lagging (insulation) with a 50 mm external diameter. All the models that I could find were pretty tall. I remixed this model specifically so that it was short enough to print on my Voron 0.2 printer.…

Downloads
78
Likes
16
Rating
5
P
PrintablesTolichev

BambuLab X1 Carbon (Thermal & Noise insulation BOX) - Top Panel remix for LED Riser

Remixed BambuLab X1 Carbon (Thermal & Noise insulation BOX) top cover from here: https://www.printables.com/model/504364-bambulab-x1-carbon-thermal-noise-insulation-box/files to fit "Bambu X1 Carbon Reinforced LED Riser Upgrade"…

Downloads
76
Likes
31
Rating
0
P
PrintablesEl Flecko

Multiboard KNIPEX 1262180 (Insulation Stripper) Holder Onshape / Parametric

Multiboard Mount for a KNIPEX 12 62 180 Wire Stripper You can find the editable original file in Onshape: https://cad.onshape.com But if you go this way, I would still appreciate a download and a like here.But if you go this way, I would…

Downloads
73
Likes
4
Rating
5
P
PrintablesIatraliptes

Qidi Tech X-Max side panel thermal insulation

Why? I wanted to have an acoustic and mainly thermal insulation of the thin plastic side panels of the Qidi Tech X-Max which doesn't look like a giant black foam plate, that has been bungled and glued onto the panels Features: Looks so…

Downloads
71
Likes
16
Rating
0
P
PrintablesSurfalex2000

Creality K1C Side Panel Insulation spacers

I would like to use my K1C as a Heated printer, so i insulated the Top and the sides. This model is a spacer for the Side Panels, to use 19mm Armaflex self adheering Insulation ( Amazon Link ). With this (and Top Insulation that i also…

Downloads
64
Likes
40
Rating
0
P
Printablescewo

Spools for electrical insulation tape

Different spools for different types of tape. Two versions are available for every size combination. Let me know if you need a another inner and outer diameter combo. Don't hesitate to post your makes and comments. Print face down, 0.3 mm…

Downloads
62
Likes
21
Rating
0
P
PrintablesKen Mills

Scion / Toyota Firewall Insulation Nut Retainer

Replacement plastic nut to hold the firewall insulation mat on my Scion tC. This will likely fit other Scions and Toyotas. I couldn't find a replacement part so I just made my own. I will update this description with the original part…

Downloads
60
Likes
14
Rating
0
P
PrintablesPavel Brych

Pipe insulation clips (spony na izolaci trubek)

Sealing clips to close pipe insulation sleeves -- spony na sepnutí izolace trubek, např. mirelon

Downloads
57
Likes
12
Rating
5
P
Printablespop aruaru

Insulation Bumper for Grove Shield for Pi Pico

Insulation for electric shorting. Need 4 peaces of M2 self tap screw bolt.

Downloads
57
Likes
2
Rating
0
P
PrintablesBuggi

Pipe insulation cutting tool

You just need 6 3x20 wood screws to screw this together. And a knife to start cutting. There are 45° edges on the end, and 22,5° slots for wider radius cuttings in the middle.

Downloads
56
Likes
12
Rating
0
P
PrintablesThor Sten

X/Y stepper motor noise insulation & cooling K1 Max

K1 Max has less space around the X/Y motors cause of side and back panels. Two versions are available: stock motors LDO motors Works perfectly with BootyCall Jones gantry mod. Outer part fits left&right, inner part has to be mirrored for…

Downloads
56
Likes
15
Rating
0
P
Printables3D Brothers

Šablona na ořezávání izolace / Insulation trimming template

Šablony na ořezávání izolace na potrubí. Velikosti : 15/10 - 18/10 - 22/10 - 28/10 ( Vhodné i pro izolace s 6mm stěnou ). 15/15 - 18/15 - 22/15 - 28-15 ( Vhodné i pro izolace s 10mm stěnou ). Pravý úhle, úhly na t-kus . Templates for…

Downloads
56
Likes
5
Rating
0
P
PrintablesPedroKV

Anycubic I3 Mega insulation holder-spring

Holder of 3mm under-hotbed-insulation. Resolution: 0.6mm (nozzle 0.8mm) Infill: 0%, 1 perimeter Filament: Spectrum PET-G Lion Orange Notes: Printed from PET-G, nozzle size 0.8mm, one perimeter and 0% infill, this produces fast print and…

Downloads
50
Likes
16
Rating
5
P
PrintablesKriva3D

Insulation frame for Voron 2.4 300mm

I created this couse i wanted my chamber temps te be higher and i couldnt find anything like this. It's not the pretiest thing but it does work.It is made for a Voron 2.4 300mm with 3mm panels and 10mm insulation. It rases my chamber…

Downloads
49
Likes
23
Rating
0
P
PrintablesRes

Insulation mount for Yarbo

Disclaimer: While this doesn't modify the unit in any way, I take no responsibility for how it may affect operation in any way. Use at your own risk! Hooks into the slots under the battery cover in order to provide a mountable rig on the…

Downloads
46
Likes
3
Rating
0
P
PrintablesPiotrek

Adjustable electrical box for external wall insulation

Electrical box for mounting under insulation on the outer wall. Socket mounting screw spacing is 60mm which is European standard. Adjustable range is 15.5 - 22cm. Model was created in tinkercad, therefore thread is a bit low poly and…

Downloads
46
Likes
5
Rating
0
P
PrintablesOmni RF

Solid Foam Insulation Pins

These pins can be used for constructing a very simple insulated enclosure for your printer. My printers are located in my workshop where it often gets down to around 5°C in the winter months. I used these pins to construct an insulated…

Downloads
43
Likes
5
Rating
5
P
PrintablesBig Merona

Saddles for pipe insulation

It became necessary to repair water pipes. I needed some plumbing saddles, and I needed them to be easy to install and release. Ender3V3, 0.3 layer height, 35% cross hatch infill, PETG, about 1H print time The outer diameter of the…

Downloads
43
Likes
10
Rating
5
P
Printablesrebeltaz

Insulation FoamBoard Enclosure Connector Clips

After several months of successful, summer printing, fall/winter is here and it is apparently too cold to print :( I needed something quick and cheap, so I decided to throw together an enclosure made of 1/2" insulation foamboard. It's not…

Downloads
38
Likes
3
Rating
0
P
Printableslual

Winter insulation for unused cat flap door

Glue up a sealing tape (~20mm*5mm) all around and plug into the tunnel from the outside. I've printed it with transparent PLA. The infill with several unconnected chambers to insulate better.

Downloads
35
Likes
3
Rating
0
P
PrintablesThael

Anet A8 - heatbed - current - insulation

/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////

Downloads
33
Likes
5
Rating
0
P
PrintablesHamillES

1" and 1-1/4" SCH40 Pipe insulation (3/8") Cap

Needed some caps for a canoe trailer I was working on with 1" and 1-¼" SCH40 pipe supports covered in 3/8" wall insulation. Printed mine in ASA with supports (which are a pain to remove)

Downloads
33
Likes
3
Rating
0
P
Printablesememable

Prusa Enclosure - Vent Cover with Dampening Insulation

Here goes another cover for the original Prusa Enclosure. Wasn't happy with the existing ones, so I quickly sketched and printed this one. I wanted to add some insulation to dampen the microphone like panels. Instead of printing a TPU…

Downloads
32
Likes
7
Rating
0
P
PrintablesFrodo

Cable Insulation Clamp (Print in place)

This model came to be when I needed to charge a lithium battery without a connector, while connecting the cables to the charger with alligator clips was not a problem, I didn't want the exposed cables to short. Due to this I decided to…

Downloads
29
Likes
7
Rating
0
P
PrintablesSteveW91

Sound Booth Foam Insulation Corner Structures

Rather poorly implemented design by me but hopefully someone else can help make it better!

Downloads
28
Likes
12
Rating
0
P
PrintablesChrisE

Biohort Shed - Save $$$ with this Hook for DIY Insulation

Alternative solution for the Biohort Internal Insulation/Lining of their garden shed lines Supports can fix 9mm wooden panels to line the inside of your metal shed Hook Design Suggested Panel Size Length 2000mm Width 275mm (use 280mm if…

Downloads
27
Likes
3
Rating
0
P
Printablesflotschi

Heatbed Insulation Prusa Mini/+

Heatbed Insulation for your Original Prusa Mini/+ Save up to 15% energy (the heatbed consumes the most energy while printing) More even temperature distribution Faster heatup I made this because the corners of my Mini Heatbed take really…

Downloads
26
Likes
11
Rating
0
P
PrintablesNK6150

Beer can insulation (Izolační obal pivní plechovky)

I made a 0.5L beer can insulation for hot days. I chose 15% honeycomb as the filling. Use a modifier with stronger padding on the handle If you like the model, I would be happy for your like.

Downloads
25
Likes
5
Rating
0
P
PrintablesPatrikB

Grommet / Insulation insert (50 mm hole)

Printed using Prusament TPU 95A Natural.

Downloads
23
Likes
6
Rating
5
P
PrintablesStephen Hart

Pipe insulation cutting jig

I found other examples but they were all compromised in some way. I include the FreeCAD file so people can remix for different pipe sizes. The FreeCAD file allows easy changes, select the sketch and change the inner circle dimension,…

Downloads
23
Likes
3
Rating
0
P
PrintablesMajkl

125mm pipe foam insulation holding clip

I Needed to hold foam insulation on a pipe. So this is my solution for it.

Downloads
21
Likes
3
Rating
0
P
PrintablesTonyW

Greenhouse insulation or shading corner clip

This is a three part corner clip for hanging insulation or shading in your greenhouse. It is designed to clip onto the flat sections in the corners, not the t-track sections. I have used PETG successfully but I would imagine they would be…

Downloads
21
Likes
1
Rating
0
P
PrintablesHitLuca

Voron 0.2 tophat top clip for added insulation

This tophat clip has been raised by 7mm in order to accommodate standard heated bed insulations like this one . Simply cut a square and place it between the tophat extrusions and the top acrylic panel

Downloads
21
Likes
7
Rating
0
P
PrintablesOlaf

Schallschutz für Lunos Luftdurchlass - Soundinsulation

For my exhaust air heat pump, I have several external wall air diffusers, so-called ALDs, in the shutter box. I designed this component to improve the sound insulation here. A “first element” and several “middle elements” are required.…

Downloads
20
Likes
7
Rating
0
P
PrintablesRoman

CNC Aluminum Mold for Wire Insulation

This project is a 2-part CNC aluminum mold designed specifically for wire insulation and small part prototyping. The mold supports both 2-wire and 3-wire connections, making it ideal for testing different configurations. Perfect for…

Downloads
20
Likes
3
Rating
0
P
Printableslual

Car Bonnet Caps / Insulation Mat Clips / CL-0150

For attaching the soundproofing mat in the hood. I printed this with PETG-CF. The mat appears to be securely attached. But I'm unsure whether the part will retain its shape under the harsh conditions in the engine compartment. Update…

Downloads
20
Likes
2
Rating
0
P
PrintablesOleg Lyan

VW Hood Insulation Clip — Reinforcement Plate (Real-world Fix)

This part was created to solve a real problem : the hood insulation (sheath) under the bonnet kept falling off while driving — even at ~130 km/h . The original VW clip has a very small contact surface. Over time, heat, vibration and wind…

Downloads
19
Likes
2
Rating
0
P
PrintablesFranky Storms

Salvaged Insulation from The Cycle: Frontier

This is the lootable common item from the video game, The Cycle: Frontier. Item Description: Even outside of its intended purpose, the materials still have various uses in item printing. Yes, its asbestos.

Downloads
18
Likes
2
Rating
0
P
PrintablesGuillaume

Vag bonet insulation

This clip is to help secure your old hood lining. Printed in PETG with 100% infill. I haven't driven it enough yet to be sure it will hold up over time. Putting the clip on the carpet is very difficult to install. I highly recommend using…

Downloads
17
Likes
2
Rating
0
P
PrintablesTonyW

Greenhouse insulation twist lock clip

A clip for hanging insulation or shading in your greenhouse. Simply pop the washer over the end and push through the insulation or shading material and twist the end into the track of your greenhouse uprights.

Downloads
16
Likes
6
Rating
0
P
PrintablesNoizie Works

Voron 350mm insulation Jacket

Proceed with caution! This is not a final or optimized file so expect some tolerance issue, it's a step file so mod away! The current file supports adding 3mm foam strips to the frame to provide a cushion between the plastic and frame.…

Downloads
16
Likes
8
Rating
0
P
PrintablesVoodoo

PLA Insulation Board for Martian Frame Kit Version 1 2 3

Insulation Board Usage for Martian ⅠⅡⅢ frame kit 2mm compatible frame https://goo.gl/uPDWva https://goo.gl/hilr7K https://goo.gl/6exqlg https://goo.gl/h7p9nF https://goo.gl/s17hzo Category: DIY

Downloads
16
Likes
2
Rating
0
P
PrintablesBaal

Duplicator i3 hotend silicone insulation sock

Remix of Crazydog's Hotend Mold. - Shout-out to him! This remix is thinner (3mm vs 4mm silicone) and with bevels so it has better compatibility with Hotend cooling ducts. This one ist completely compatible with Thorped's Fan Duct which im…

Downloads
15
Likes
1
Rating
0
P
PrintablesJohination

Isolierung Pufferspeicher Clip / Insulation buffer clip

Ein Ersatzteil um die Isolation am Pufferspeicher befestigen zu können!

Downloads
14
Likes
2
Rating
0
P
PrintablesHB Stratos

SV08 Rear Exhaust Fan Trim For Insulation

I was insulating my print chamber (official SV08 enclosure), but the edge around the exhaust fan ended up looking really ugly. So, what I can't make work with precision, I can at least cover up with printing. I think it looks pretty nice.…

Downloads
13
Likes
4
Rating
0
P
PrintablesRieva

ownMade - Backdoor accessory for insulation

Our back door does not hang straight on the hinges, and does not close properly in the top corner. The cold draft then enters through the sealing rubber. That's why I made this strip for the top and the long side of the door, on which I…

Downloads
13
Likes
0
Rating
0
P
PrintablesSeduron

K1/C Side Insulation Screw Spacer

M3x25 Spacer for the Insulated Side Panel Mod.

Downloads
12
Likes
4
Rating
0
P
PrintablesKasper_Eliasson

Chamber insulation for Qidi Q2 printer

Background !!!Important note!!! I have not tested the insulation with the printer's spool holder installed. Not sure if they are compatible. I occasionally print PC and PA filaments at 60 °C chamber temperature on my Qidi Q2. The chamber…

Downloads
12
Likes
7
Rating
0
P
PrintablesArturous144

Bed Insulation Retainer w/z-stop and cable chain

A bed insulation retainer with solid spacers, a z-stop, and cable chain. this is designed with my y-axis flip and other mods taken into account so so the placement of the z-stop may not be right for your setup, if your nozzle wont reach…

Downloads
11
Likes
3
Rating
0
P
PrintablesKonstantin3d

Suported Hexagon insulation panel

You have to use 0% infill instead of vase mode for it to work, 0.2mm or 0.3mm layer height(depends on how fast youwant them done), you also need to set perimeters to 1 and top solid layers to 0 i will leave my setings(for Prusa MK4/S)…

Downloads
11
Likes
2
Rating
0
P
PrintablesTimmyTPU

Creality K1C Insulation frame

I struggle to print ASA and other high temp materials on my K1C. With ASA, once the print reaches a Z height of about 30 - 50 mm, things go catastrophic and the part warps and delaminates. I suspect the issue is temperature related and…

Downloads
11
Likes
5
Rating
0
P
Printableszzw11

Vcore4 300/400/500 Insulation supports

Insulation supports for the back wall of a Vcore4. 220 length for the upper wall, fits all sizes. VC4-300: 255 for the lower wall. Also included is a version of the 255 suport with holdet for a 3mm PT1000 temp sensor. VC4-400: use file…

Downloads
10
Likes
3
Rating
0
P
PrintablesDr. Walder

Water Pipe Insulation Hanger

1screw or 2 screws hangers for foam insulated water pipes of US sizes ¾, ½ and 1inch. Foam insulation diameters are 42mm 42mm and 52mm. It is for standart foam insulations available in Home Depot or Lowes for those pipe sizes.…

Downloads
10
Likes
1
Rating
0
P
PrintablesMortalWombat

Heated Bed Lift Kit for bed insulation - Longer LK1 / Alfawise U20 U30

EDIT: After several months, I noticed the printed washers had warped significantly. Maybe it's PLA's tendency to do exactly that when under constant stress, or maybe it's the heat making its way through the neoprene. Probably it's both.…

Downloads
10
Likes
0
Rating
0