Search results: iron

Sort order

3,193 models

P
PrintablesOpenFigure3D

Iron Man MK3 Articulated Figure

Welcome to OpenFigure3D! This is our first fully 3D-printable articulated figure: Iron Man MK3 , as seen on the first MCU movie Iron Man of 2008. The designer is Dany Sánchez , who is also behind MiniWorld3D . Further below are the full…

Downloads
15,628
Likes
3,369
Rating
4.6
P
PrintablesDET-Man

Soldering Iron Holder for Dremel Workstation - A Heat-Set Insert Press

When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…

Downloads
7,750
Likes
225
Rating
5
P
PrintablesA2S_dESIGN

Folding soldering iron stand

Practical support for tin soldering iron. Universal size. Its small folded size allows it to be stored anywhere. Very practical to carry in the toolbox. Print in place.

Downloads
6,242
Likes
2,124
Rating
4.92
P
PrintablesPrintium 3D

Iron Man Remix for Dummy 13

Instructions by Printium 3D For Iron Man, you should be printing the outer armor in Iron Red and Gold filament. I choose to use PLA instead of the recommended PETG because I got more model detail from the PLA. I did use galaxy black PETG…

Downloads
6,149
Likes
1,872
Rating
4.96
P
Printablesrostislavmazz

Iron Man action figure

This is a Iron Man action figure. Print with PLA The need for model paint

Downloads
4,628
Likes
497
Rating
4.92
P
PrintablesCalebTimoteo

Iron Man Hand - Headphone Stand (Decoration)

Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)

Downloads
2,216
Likes
529
Rating
4.33
P
Printablesokurka

Helma (helm) Iron Man MK3

Maska životní velokosti YT (autora) https://youtu.be/DW2U8mnK4qQ

Downloads
1,570
Likes
233
Rating
4.5
P
PrintablesSzeez

Picatinny folding iron sights

To assemble it you'll need 1 m3 by 20mm and 4 m3 by 30mm socket head screws, 1 self locking m3 nut and 2 normal or thin m3 nuts and 4 m4 by 6 set screws To adjust X axis turn the screw on the rear post To adjust Z axis position the yellow…

Downloads
1,519
Likes
290
Rating
4.7
P
PrintablesMeasureOnce

Lithophane Books (Iron Flame)

Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…

Downloads
1,193
Likes
138
Rating
5
P
PrintablesBaboucarr

Iron man Key chain

Print Instructions : filament: PLA OR PETG infill: 20% layer height: 0.2 or 0.3mm should work. enjoy.

Downloads
1,132
Likes
104
Rating
4.89
P

TS100 Soldering Iron Box & Tip Holder

Case for TS100 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Outer Dimensions: 179mm x 38.6mm x 25.8mm Also have a look at my Fume Extractor & TS80 Case UPDATE v27: with better…

Downloads
859
Likes
143
Rating
4.91
P
PrintablesMehTechArt

Bugatti Chiron Wall-mounted

Please click if you appreciate my work :) If the Veyron was legendary, the Chiron is pure mythology on wheels. This 3D printable sculpture brings the bold silhouette of the Bugatti Chiron to life in a sleek, wall-mounted display –…

Downloads
842
Likes
209
Rating
5
P
PrintablesPeter Farell

Cast Iron Play Skillet

Cast Iron Play Skillet

Downloads
820
Likes
273
Rating
5
P
PrintablesCharlie Essers

Wall-mounted Iron Holder with cable clip

A wall-mounted holder for your iron. Coiling up the cord every time seemed too fussy so I incorporated thegrateman's latching broom holder for cable management…

Downloads
792
Likes
110
Rating
4.88
P
PrintablesAsa

Adironack Chair

I created this solid model from a Popular Mechanics template from their July 2006 edition. I've made many of these Adirondack chairs at 1/10th scale on a Prusa Mk3s+ 3D printer. I print it out as individual components and assemble using…

Downloads
788
Likes
151
Rating
5
P
Printables_KaszpiR_

Gridfinity soldering iron tip holder with locks, 16 holes

About I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down. I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that…

Downloads
478
Likes
56
Rating
4.91
P
PrintablesNiH

Soldering iron add-on for 'Adjustable PCB Holder Tool'

Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…

Downloads
448
Likes
269
Rating
4.67
P
PrintablesArgo

Toyota GT86 & GR86 / Subaru BRZ / Sciron FRS Pedal Spacer

I have designed this 20mm pedal spacer and new pedal stop to simplify heel and toe with a Toyota GT86 / GR86 / BRZ. Just contact me for further details or if you need a print. You need M6x30 bolts / nuts.

Downloads
273
Likes
29
Rating
4.5
P
PrintablesPOON3D

UPGRADE!! Anycubic (Chiron / Kossel / Mega-X) Spool Holder Easy Clip Lock

UPGRADE!! Spool Holder Series : Anycubic (Chiron / Kossel / Mega-X) Easy install just clip on for more smooth rolling filament spool Enjoy!

Downloads
271
Likes
25
Rating
4.5
P
PrintablesPeter Farell

Dagger Pendant: Iron age bone carving.

Dagger Pendant: Styled after Iron age Bone Carvings.

Downloads
264
Likes
86
Rating
0
P
PrintablesJorge Barros

Iron Man Mark V Suitcase

You can now become Iron Man with this model of the Mark V Suitcase in real scale!

Downloads
262
Likes
46
Rating
0
P
PrintablesSento_om

Lego Ironman TF3D

Se ha hecho un remake/remix del muñeco de Lego estilo Avengers escalado al 350% para la Gran Comunidad de TF3D Filamento usado: XYZ Filaments Tic Tac Glitter Red Pla silk gold smartfil

Downloads
256
Likes
79
Rating
0
P
Printablesthetechnick

Anycubic Chiron Hemera/Hermes Adapter Plate

Hemera/Hermes adapter plate for the Anycubic Chiron. This adapter plate allows you to mount the Hemera unit without modifications to the baseplate of the Anycubic Chiron. You can also still use the included bed leveling probe, but I have…

Downloads
218
Likes
10
Rating
5
P
Printablestom

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…

Downloads
216
Likes
25
Rating
5
P
Printableskamkalian

IRONY swatch watchband

This watchband is designed for "IRONY" from swatch. It could be fit to other watches with 23mm width watchband. You need only a 3D Printer and 1.75mm Filament for this watchband. Print instructions Print some parts of segments dependent…

Downloads
157
Likes
13
Rating
0
P
Printablestom

Stabiler Lötkolbenhalter für Einschmelzgewindeeinsätze/ Sturdy soldering iron holder for threaded inserts

Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. Damit können Gewindeeinsätze rechtwinklig in Bauteile eingebaut werden. Wenn der Druck korrekt ausgerichtet, wird keine Unterstützung benötigt (siehe 3mf-Dateien). Die…

Downloads
150
Likes
19
Rating
5
P
PrintablesStelzenbach

Soldering iron holder TS-100 & TS-101

3D-printed soldering iron holder with spring-loaded holder for secure grip, integrated holder for cleaning the tip, and additional storage for a spare soldering tip. For best results with PETG filament, use these print settings: 0.2mm…

Downloads
137
Likes
41
Rating
5
P
PrintablesJimleeQ

Gridfinity 1x1 Threaded insert soldering iron tip holder

I made this to hold my threaded insert tip set. It's stackable when filled, and the bits are arranged in size order (I've given a bit more space for the larger bits). They are arranged clockwise in increasing size from the bottom right.…

Downloads
135
Likes
30
Rating
5
P

TS80 Soldering Iron Case & Tip Holder

Case for TS80 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Also have a look at my Fume Extractor & TS100 Case UPDATE v29: Fixes based on input from @4nthonylin . Moved soldering…

Downloads
135
Likes
10
Rating
5
P
PrintablesMatous

Roxley Iron Clays extra chip sleeve screw top holder

I needed simple way to store my extra sleeves of Iron Clays poker chips from kickstarter. This simple design ensures that the chips are securely stored in one place besides the original Iron Clays box. Inner tube size is 40mmx70mm ( one…

Downloads
129
Likes
16
Rating
5
P
PrintablesMrFlippant

Transformers Autobot Ironhide Bobblehead

Bobble the head of your favorite Autobot Security bot! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from…

Downloads
115
Likes
30
Rating
0
P
Printablesfivesixzero

Skadis Holder: Pinecil/TS100 Soldering Iron Tips (uses heat set inserts)

Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage. Nice companion for mounting above the Skadis Pinecil holder/soldering station:…

Downloads
110
Likes
35
Rating
3.5
P
Printablesmacsddau

Homeopathy tube locker (Boiron)

This is the same part adapted for small Boiron brand homeopathy tube. Both models are stackable. One piece build. Can be printed on Prusa Mini+

Downloads
108
Likes
10
Rating
0
P
PrintablesSuren

Cute Iron man standing

Another addition to your workspace/collection (scalable). Enjoy!

Downloads
104
Likes
9
Rating
0
P
PrintablesCalebTimoteo

Ironman Skull Head - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Downloads
103
Likes
29
Rating
5
P
PrintablesAdam

Iron Ring Replica

This is a replica of the iron ring associated with professional engineers in Canada. https://ironring.ca/home-en/ Printing instructions Print the .stl file as oriented I recommend ironing for a nice finish Safety notes This would not pass…

Downloads
98
Likes
6
Rating
5
P
PrintablesQuizcen

Battery Powered Soldering Iron Case

I created this case for my small soldering iron. it hoses all the tools you need, the stand and tip cleaner, solder, USB-C cable, and the soldering iron. Print without support, but a semi-calibrated printer is required. I got my soldering…

Downloads
96
Likes
33
Rating
5
P
PrintablesSvensson2584

Solder Iron Holder for Weller

Hi, a few years ago I got my hands on a used soldering iron ( Weller WECP 20) . It is good enough for me but only recently I noticed that on the soldering iron stand something is missing (see 3. picture). There was no socket to take in…

Downloads
95
Likes
16
Rating
0
P
PrintablesVoronwë

Harley Davidson Shovelhead/Ironhead HAMCAN air cleaner insert

Replacement part for: Harley Davidson Shovelhead/Ironhead HAMCAN air cleaner.

Downloads
84
Likes
6
Rating
5
P
PrintablesPeter Farell

Gilded Age Iron Workers Eating Lunch on I Beam

Gilded Age Iron Workers Eating Lunch on I Beam

Downloads
80
Likes
12
Rating
0

Ironing Coaster Test

Wanted to create an ironing test that could be utilized beyond just the test itself to avoid being left with plastic scraps when done. This test print can double as a large drink coaster or keep it to use as a reference for your selected…

Downloads
80
Likes
7
Rating
0
P
Printableskennyd1gital

TS80P Soldering Iron Case

A storage case for the TS80P soldering iron by Miniware. The case has space for the TS80P soldering iron and five interchangeable tips, as well as a couple storage areas for a USB-C cable, tube of solder wire, or whatever else you can…

Downloads
73
Likes
20
Rating
0
P
PrintablesDadoVodaLAB

FNIRSI HS-02A Soldering Iron Stand – Compact Desk Holder

NIRSI HS-02A Soldering Iron Stand This is a compact desktop stand designed specifically for the FNIRSI HS-02A soldering iron . I designed this model from scratch, taking inspiration from the excellent work by jabdoa_4397802 : Gridfinity…

Downloads
61
Likes
3
Rating
5
P
Printableschixxi

Soldering Iron TS80P - Protective Case

I needed a protective case for my TS80P soldering iron. There are many variants available already, but I was looking for a compact case for the TS80P with one tip only. I couldn't find one which fitted my needs, so I came up with this.…

Downloads
60
Likes
8
Rating
5
P
Printablesspark

Dremel Drill Press to T12 Solder Iron Adapter

I wanted to make better use of my Dremel Drill Press workstation for other pressing tasks without compromising stock utility. The system consists of a dummy rotary tool head that mates with the press and will then accept future…

Downloads
59
Likes
18
Rating
5
P
PrintablesJulian Quesada

Ironside Laptop Holder

Fellow Majesties! Say hello to the Laptop Holder for your Project Ironside game table! This will slot right in alongside your other Ironside accessories and enable your more tech savvy players to keep their tools from interfering with…

Downloads
55
Likes
4
Rating
0
P
PrintablesOxyfraggle71

Heat-set Insert replacement holder for Weller soldering iron WEP70 connected to Dremel 220 Drill Press

I have designed two 3D-printed models to create a simple connection between the drill stand from Dremel (model name 220) and the soldering iron WEP 70 (station WE1010) from Weller. The main goal is to enable the vertical insertion of…

Downloads
52
Likes
10
Rating
5
P
PrintablesBlackbird

Ironing water can - 300ml

It can hold 300 ml (10 oz) of water. Height 95 mm. To be printed in vase mode. I used 0.6 mm nozzle and 0.7 mm extrusion width. Tried only with cheap PETG and it is much more sturdy than expected. I made one larger version, but then it…

Downloads
48
Likes
4
Rating
5
P
PrintablesRobert Schiele

Adapter to Install ERSA Soldering Iron RT 80 Into Drill Stand with 43 mm Euro Mount

While there are custom heat set insertion presses, often including a cheap soldering iron it seems like a waste of resources if you already own a high-quality soldering iron or even a soldering station and a drill stand. The only missing…

Downloads
45
Likes
4
Rating
5
P
PrintablesDr.Vee

WEP soldering iron base stand

A lightweight stand allows for placing the soldering iron holder on top of the WEP 898BD soldering station. Fits the stock soldering iron stand. May also fit other WEP, ATTEN or Yihua soldering stations with a similar chassis…

Downloads
39
Likes
7
Rating
0
P
Printablesargoroots

Box for Soldering Iron TS80P and accessories

Glue required. Also some magnets to better hold cover, but not 100% needed.

Downloads
30
Likes
9
Rating
0
P
PrintablesMike81622

BigBricks Wall Mount Iron Man Repulsors

One of our guys on the BigBricks discord came up with very nice repulsor models suitable for BigBricks Lego inspired 6 to 1 of Iron Man. The repulsor models can be found here: https://makerworld.com/en/models/504761#profileId-420434 Since…

Downloads
30
Likes
10
Rating
0

Wall Mount for Ironing Board (Laurastar)

Wall mount for an inroning board (optimized for LauraStar) or any other brand that uses round tubes for the base. Can be fastened to the wall using screws with 4.5mm diameter (the ones coming typcially with 6mm dowels

Downloads
28
Likes
3
Rating
0
P
Printablesthomergil

Black & Decker WM2000SD Waffle Iron Foot Stand

Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.

Downloads
23
Likes
4
Rating
5
P
PrintablesTUS

3/4 iron pipe shelve support

¾ water pipe, steel pipe, iron pipe shelve support. can be screwed for additional safety

Downloads
20
Likes
5
Rating
0
P
PrintablesHawwwran

Hippomed AirOne Ultrasound Inhaler - Chamber Lid

Ultrosound mist chamber lid for Hippomed AirOne Ultrasound Inhaler.

Downloads
19
Likes
1
Rating
0
P
PrintablesFuu

Gaciron V9C-800 Shade

I made a shade because the light is quite dazzling. Use double-sided tape for mounting. While keeping the brightest part of the light alive, I cut the upward light. Maybe you can use it with V9CP.

Downloads
18
Likes
3
Rating
0
P
PrintablesOrbCorp

Solder Sponge Tray for (Aixun) Soldering Iron Handle Holder

My Aixun soldering station came with a smart iron holder that has your run of the mill brass sponge in the front for cleaning your soldering iron tips. For me this did not cut it for cleaning so I designed a tray to hold a 55mm x 55mm…

Downloads
17
Likes
3
Rating
0
P
PrintablesMuad´Dib

Nažehlovací logo (Iron-on logo)

Model vznikl v rámci jednoho školního projektu. Logo se vytiskne na 3D tiskárně. Před nažehlováním překryjte logo pečícím papírem. Tričko raději perte ručně, aby jste si nepoškodili pračku možnými odlamujícími se kousky loga. The model…

Downloads
11
Likes
1
Rating
0
P
PrintablesBooks

Conical Weller Soldering Iron Tip

Model of a conical tip for a Weller Soldering Iron. Useful for lost-PLA casting.

Downloads
11
Likes
0
Rating
0
P
Printablesenjoibuddy

Pinecil iron holder spacer cone

I purchased a soldering iron holder from Amazon, but it was slightly too wide for my Pinecil. The simple cone, however, has two cutouts specifically designed to fit the Pinecil size on a standard soldering iron holder. Supports recommended

Downloads
7
Likes
0
Rating
0
P
PrintablesMAC_3D

Masimo iSirona Dräger/Philips Vent mounting solution

https://buymeacoffee.com/stealthyscw This model was a made from scratch solution for mounting the Masimo iSirona EMR capture device onto Dräger vents or Philips V60 vents. Masimo does not offer a mounting solution for these units when…

Downloads
6
Likes
1
Rating
0
P
PrintablesJace1969

Iron Man Mk42 Helmet

Here is Iron Man Mk42 Helmet. Print instructions Category: 3D Printing

Downloads
27,956
Likes
1,649
Rating
4.18
P
PrintablesLeoganPro

Top Surface Ironing Test

This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…

Downloads
25,670
Likes
1,340
Rating
4.8
P
PrintablesBuřina 3D

Iron Man

⚠ ATTENTION: New and improved version available! I have created a complete overhaul of this model called Iron Man Mark 3. If you are looking for higher fidelity, better textures, and overall better print quality, please download it here:…

Downloads
13,217
Likes
1,619
Rating
4.67
P
PrintablesInfinytiumVerse

Iron Man mask

Iron Man mask, version mark 2. The archive contains 5 plates, 5 partas of the mask

Downloads
11,329
Likes
1,890
Rating
4.55
P
PrintablesRegal_Prop-Shop

Regal & Markiplier - Iron Lung Blood Bucket Popcorn Container

Regal has partnered with Markiplier's Iron Lung movie, to provide fans the ability to print their own collectible popcorn container. Working with Iron Lung's creature creator, Molly Brown (@deadlymelodic), Regal's Prop Shop team created…

Downloads
11,050
Likes
471
Rating
4.55
P
Printablesjon

Ironing flow test (ready to use with settings)

Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…

Downloads
9,858
Likes
540
Rating
4.89
P
Printablesiczfirz

Iron Man MK42 Landing Pose Support Free Remix

Subscribe Now! Time-lapse print video : https://youtu.be/F1pj7ACaZ70 Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…

Downloads
7,816
Likes
1,405
Rating
4.93
P
Printablesiczfirz

Iron Throne Support Free Remix

Great model from Revennant. Remixed to no base and almost support free. IronThrone_SupportFree_icz.stl (Need infill) IronThrone_SupportFree_NoInfill_icz.stl (No infill with sloped seat. Printed in timelapse) Subscribe to find out more…

Downloads
6,626
Likes
1,229
Rating
4.94
P
PrintablesAyhxmDev

Iron Man Mk3 Helmet

A High resolution model of the Iron Man Mk3 helmet from Iron Man I. Suitable for cosplay. model by Official3D @Official3D follow him <33

Downloads
6,271
Likes
749
Rating
4.21
P
PrintablesMarc

Iron Man Helmet, Articulated, Wearable

Original Thing here: https://www.thingiverse.com/thing:4629346 This is just a reupload under the CC-BY-4.0 License. Original Design by Boxandloop. Update 12/09/2020: Added a wiring video Update the code for Eyes to blink on when facemask…

Downloads
5,974
Likes
874
Rating
4.53
P
PrintablesHomeDecor

Ironman

Design Concept This model embodies the iconic superhero in a stylized polygonal design, making it ideal for fans and collectors. Use Perfect for display on desks or shelves, and as a conversation piece for fans of the superhero genre.…

Downloads
4,535
Likes
520
Rating
5
P
PrintablesCrazy Creo
Downloads
4,288
Likes
1,505
Rating
4.9

Iron Man

These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…

Downloads
4,055
Likes
807
Rating
4.97
P
PrintablesMonkey_Ludge

Iron Man Helmet

An Iron-Man Helmet that can be used for cosplaying or just displaying. Model contains: 3-Parts for the model to print. Size can be any use. Use Any type of Filament for this model if you want. Remix if you want to change the model or do…

Downloads
4,045
Likes
804
Rating
5
P
Printablesmatthew duncan

iron man mk85 helmet

iron man mark 85 helmet please size to your head before printing https://www.thingiverse.com/thing:4607836 link to motorize this helmet you will need some mg90 or sg90 servos the video below this a great video on how to make the helmet…

Downloads
4,014
Likes
288
Rating
4.78
P
PrintablesBudwin

Iron-man Hand set

I made two versions that should work with most iron man suits. The first is a Nano techie glove. The second is a universal glove Be sure to scale the hand before printing . 1.- Separating parts - Use Mesh mixer or your choice of modeling…

Downloads
3,832
Likes
651
Rating
3.67
P
PrintablesDa_Rius

Heart Waffle Iron - for little Bakers and big Parent Makers

Toy Heart Waffle Iron – Fun for Little Kitchen Chefs! Bring real kitchen vibes into the playroom – no electricity needed, just lots of imagination! This lovingly designed 3D-printed toy waffle iron comes with matching heart-shaped waffles…

Downloads
3,736
Likes
1,525
Rating
5
P
PrintablesBudwin

Iron Man Mark 46-47 Helmet

Mark 46/47 helmet Full suit is now available at my shop. Link below 1.-Sizing - The Helmet may need to be sized for your needs, as it is roughly sized to fit a Average male I recommend using my FREE Heads for Sizing here -----…

Downloads
3,701
Likes
495
Rating
4.75
P
PrintablesRUMcajz

IronMan Can Holder / Beer mug

IronMan Can Holder Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Tree supports (at least 26°) Here…

Downloads
3,676
Likes
673
Rating
4.89

Dain Ironfoot – The hobbit

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Downloads
3,228
Likes
672
Rating
5
P
PrintablesMelic

Iron Man Shooting

Iron Man preparing to shoot. I didn't make this 3D model but i can't remember who did it or the web site i got it from. I did repair the mesh with Netfabb to be able to print it without problems. Print instructions Category: People Print…

Downloads
3,219
Likes
188
Rating
4.93
P
Printablesaelkaim

Iron Man Arc Reactor

I found multiple Arc Reactor models on thingiverse but none of them matched my needs so I made my own. :-) More pictures and build detail: https://imgur.com/a/uQUjV Needed parts Transparent PLA / PETG 3x M3 screw, 20mm long WS2812b LED…

Downloads
3,196
Likes
752
Rating
4.93
P
PrintablesJace1969

Iron Man Mk7 Suit / Armour

One of my many Pepakura files collected over the years all with great intentions of doing something with it. Pete you mentioned you were interested in this model? Perhaps you could spruce it up ; ). I still have the original .PDO's if you…

Downloads
3,096
Likes
346
Rating
0
P
PrintablesRedeix

Alexander the Iron Fist (Pot boy, Elden Ring)

Alexander the Iron Fist (Pot boy) from Elden Ring. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). FDM printer may have trouble especially with…

Downloads
3,032
Likes
292
Rating
4.85
P
PrintablesBudwin

Mark 85 Ironman Inspired Helmet

Mark 85 Ironman Inspired Helmet Enjoy Category: 3D Printing

Downloads
2,902
Likes
337
Rating
4.87
P
PrintablesPboy

iron throne | sword throne | game of thrones

iron throne / sword throne from tv show, game of thrones Print it as large as you can. Supports needed.

Downloads
2,791
Likes
342
Rating
5
P
PrintablesJace1969

Iron Man Mk3 Helmet & Suit / Armour

I have a vast collection of pep files from other modlers I collected over the years when I was into pepakura making, This is the Iron Man Mk3 since one and two are already here on thingyverse, I'll work my way through all the versions,…

Downloads
2,719
Likes
241
Rating
0
P
PrintablesReProps

Iron Man MK1 Arc Reactor

This is my attempt at the MK1 arc reactor. You'll want to print 10 of the copperring pieces and print the clearring and bottomring in translucent filaments/resin. The whole thing is hollow so that you can can mod it with lights. here’s my…

Downloads
2,596
Likes
204
Rating
4
P
PrintablesJace1969

Iron Man XIV Helmet Mk14

Hi Chris, tidied it up as best I could,hope it works for you and please check the sizing suits your needs, as always I look forward to seeing pics of your progress, Cheers Jace

Downloads
2,457
Likes
235
Rating
5
P
PrintablesJafjay

Iron Man Mark 2 Helmet

Scale to Your Head It wont fit it was scaled to me, Thank you for downloading! Have a Nice Day!

Downloads
2,379
Likes
306
Rating
4
P
PrintablesMr. Poly

Iron Giant - Individual Parts

Now you have individual parts to print and assemble. Follow Crazy Creo and me for more designs, and post makes of this master piece that creo made. :)

Downloads
2,377
Likes
723
Rating
5

Massive Iron Giant and Hogarth

Watch the video about how I created this here: https://youtu.be/DzTemn0n1hM This is the Iron Giant and Hogarth! It's perfect timing since he seems to be a decently big part of Ready Player One. But I'll always have a soft spot in my heart…

Downloads
2,300
Likes
722
Rating
5
P
PrintablesDX

Iron Giant - Print in Place

A modification of the original model made by Crazy Creo to make the legs, arms, torso and head already printed with their joints assembled, making assembly easier and eliminating the need to use glue. Print Settings Support are needed: I…

Downloads
2,266
Likes
711
Rating
5
P
PrintablesOpenFigure3D

Iron Man MK3 - Bust Statue (No supports)

We made a bust statue of Tony Stark / Iron Man that is easy and quick to 3D print . Available in 2 versions: Mask open to see Tony's face Mask closed It comes with an ARC reactor pedestal base . OpenFigure3D is bringing you busts based on…

Downloads
2,244
Likes
421
Rating
4.92
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…

Downloads
2,237
Likes
1,115
Rating
4.71
P
PrintablesMZ4250

Iron Golem Updated

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
1,992
Likes
106
Rating
4.67

Iron Man Mark III Helmet Separated and Oriented

This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…

Downloads
1,952
Likes
487
Rating
3.4
P
PrintablesVader

Iron Man MK6 Hand Armour and Repulsor

Cool 3D-printable Iron Man glove and repulsor you can wear!

Downloads
1,952
Likes
248
Rating
4.83