Halterung MK4 / Holder MK4 (not SK40)
Wandhalter für die Aufnahme von MK4 (morsekegel 4) Wall bracket for holding MK4 (morse taper 4)
- Downloads
- 25
- Likes
- 2
- Rating
- 0
295 models
Wandhalter für die Aufnahme von MK4 (morsekegel 4) Wall bracket for holding MK4 (morse taper 4)
With this connector you will be able to to connect to skirting boards at a degree of 135°. Now also with an inner corner model.
Fits under any desk or shelf that does not have a raised edge or support beam in front of the holder. Mounts with countersunk screws. Sides are identical, so just print two and mirror one of them in the slicer. Originally published on…
Accepts M8 bolt. Print with supports for the “nubs”. Print on base with supports, 0.2 mm layer height
Couldn't find a suiting holder for my simrig-keyboard so I designed a new one. This holder fits T-Slot 4040/8040 type B extrusion profiles. It snaps in tightly but you can remove it easily. I suggest printing it in PETG or anything with…
Citroen AK400 scale 1-18 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
A holder for the logitech k400+ keyboard. It has feet to prevent it from tipping over and holes for 6x3 cylindrical magnets to allow it to stick to metal tabletops. The keyboard will fit into the holder in any vertical orientation.
Es una base elevable, derivada de esta https://www.thingiverse.com/thing:3051286 . He realizado algunos cambios para que sea manual en vez de motorizada, y utilizando algunos elementos menos. Estos son los elementos que necesitamos para…
I have very little space where I fly my flight sim. The Honeycomb Alpha Yoke already took out a large chunk of my desk space, there is no place to put my keyboard which is a small Logitech K400+. An underdesk keyboard drawer is not…
Remix based on: https://www.thingiverse.com/thing:2790897 Made a very simple cut out for the volume buttons because they will get pushed in with the original version. Also I didn't find any other side stand like this. It has also a place…
A magnetic / stick on holder for tooltags for CNC shops. Inspired by pierson workholding. Has a large cutout for magets, can be edited to suit specific magnet size. It shound't be too hard to edit to have the same capacity as your ATC.…
here a exhaust for a K40 laser. The recess on your laser must be 240mm wide for it to fit. You can then attach a 100mm hose.
This is a mount for a k400 wireless key board that can be attached to a aluminum profile sim rig. i suggest at least 80% infill, no supports or rafts required V2 - Made a more snug fit and smooth out some edges and added a recess for the…
Laser beam alignment tool for the Chinese K40 40W CO2 Laser. The tool has two parts, one for mounting on the mirror and one for mounting on the laser head. Using tape or paper to mark positions has the problem of smoke residues getting on…
Work for K400 & K400+ keyboards. Flexible mounting options: wall, under desk or cabinet, angles, etc. Side rails allow for many possibilities. Holes for screws but I used double sided foam tape and that works great.
This is a case for the K400 keyboard from Logitech. Now you will not have your keyboard on your lap or on the floor anymore. It fits on every 8020 aluminium sim rigs. Feel free to ask me anything! My IG account is @mighty3dprints, feel…
We got a new K400+ since they were on sale and my wife wanted to put it on the wall where the toddler couldn't reach it. I couldn't find a vertical wall mount holder I liked, so I made my own. She likes hexagons, so I gave it that flare.…
The cover from jcw161 didn't fit properly to my keyboard, so I've created a new one a little bit bigger. Check the picture from the keyboard in case you have a version of the k400 model like mine. Print instructions Category: Computer…
Hey made this tooltag for an SK40 toolholder that fits a Zoller print lable. printet in regular PLA also have an HSK63
Printed it a few times. Is a snug fit so needs to bee adappted to you 3D printer
A “remake” of sorts of the original from EirikT Needed a CAD model, so i converted the stl. STL, STEP and .F3D Included
Simply solution for install air hose. Possible print without supports. New version 2019. Category: DIY
See this video on how to build the bed: https://www.youtube.com/watch?v=CWHxK8Uck-s You'll need to print the following parts: 4x bottom-frame-joint.stl (with support!) 4x top-frame-joint.stl or 4x top-frame-joint-15x15.stl (with support!)…
I replaced my K40 controller with the MKS DLC32 and needed to crate a new control panel. This is the result. Link to MKS DLC32 on Amazon: https://www.amazon.com/gp/product/B09M8BBGQS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The…
A simple and sturdy holder designed to mount a Logitech K400 or K400+ keyboard to the side of a Trakracer TR160, or any other sim rig using 40-series aluminium extrusion profile. Hardware Required : 4x M6 Bolts (12mm to 16mm length is…
Mounts with 3.5mm countersunk woodscrews. Four screws may be a bit overkill, but atleast it's solid! Fits both k400 and k400+ keyboards.
Just glue or srew these two parts under your desk and hide your keyboard. Einfach diese beiden Halterungen unter die Schreibtischplatte kleben oder schrauben und schon verschwindet die Tastatur unter dem Tisch.
Alignment tool for K40 mirror No need more for putting tape over the mirror and risking getting the mirror dirty. You can fire a couple of pulses, simply move the strip over a little bit to get a fresh piece of paper. Three versions:…
Logitech K400+ Battery Cover The cover of the K400 plus and non-plus are different and I couldn't find any models for this specific one. Seemed like a good beginner FreeCAD project, then I realized this thing has literally just one…
This is a wall mounted keyboard holder for Logitech K400 (tested with K400r and K400+). You can set it to what angle you prefer (30, 45, 60, 75, 90 degree relative to wall), or fold it up to take even less space. You can remove the…
Tool carrier SK40 for wall mounting.
K40 exhaust adapter for K40 laser with the 90mm fan to connect the original blue hose. Printed angled on the print bed to reduce supports. If there is a need for other hose diameter, let me know. - - - - Winkelanschluss für den K40 Laser…
Diese ist ein Halter um einen Kreuzlaser mit einem Durchmesser von 12mm an einem Cloudray Laserkopf aus der K Serie zu Montieren. Die idee stammt von raptor_demon ich habe es aber neu gezeichnet und die Masse angepasst an Cloudray.…
Easily removable two part 4" (100mm) vertical K40 exhaust - port and duct with optional gasket I've included a version of the duct with manually added support which saves on time and material The optional gasket is 1mm thick and fits both…
Simple keyboard holder. Made to save some space as I rarely need my secondary keyboard. But it's good to have it somewhere around. So I've come with pretty simple solution. Consists of two parts - left and right, both are symmetrical so…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
This is V2 with 20mm Mounting Hole Distance for the new Cloudray K40 Laser Head with FL 25.4mm and FL 50,8 mm. It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell…
The images are self explanatory, there's an extra STL for block modifier if you want to disable fuzzy skin inside. You'll need a DC Jack and a round rocker switch. I did this for the SK90c module but probably the it'll work SK90 SK40.…
sk40 tool holder mounting: 4x M6 screws printing: seam: sharpest corner/hide seam (there are designed reliefs)
For those of us who cut a hole in the bottom of their K40 laser to fit a rotary tool, this may be useful to change the height of the laser. These legs replace the castor wheels which are a hazard anyway. Legs let you change the height of…
This are stackables Insert Boxes for the Eurobehälter /Eurobox TK400 and TK600 /75 /145 etc. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none Comments printed…
Mounting aid for cutter holders with a SK40 cone. The mounting aid holds the tool holder firmly and securely while the tool can be fixed in the holder. Version v0-1 is without reinforcement in the "sliding blocks" and version v0-2 is with…
3D printed post to mount a drag chain on a K40 laser cutter to support the air hose for an air assist and keep it from touching the laser beam. Attached text file has directions. Print instructions Print Settings Printer Brand: Printrbot…
This is a mechanical X and Y End Stop upgrade for the K40 40W CO2 laser. The original K40 is equipped with one mechanical end stop for the X axis and one optical end stop for the Y axis; with origin at the upper left corner. This end stop…
A while ago, I lost the ESC key on my Logitech K400+ keyboard. Inspired by the other models for K400 and K400+ keys here on Thingiverse, I decided to have a go at modeling and printing the key that I was missing. If printed correctly,…
Simple holder to fit a Logitech K400 keyboard under your IKEA Fjällbo coffee table, or anywhere you need it to go under an edge of up to 25mm. Sides are identical, so just print two and mirror one of them in the slicer. Originally…
Exhaust port for K40 Laser with the 90mm fan to remove the ridiculous blue metall one. Simply remove all the screws from the backside and undo the four screws on the fan so they are flush with the inside. The screws go direct into the…
This is a replacement air duct for the typical Chinese K40 laser cutter machines that can be used with standard 100mm tubes. Some padding / sealing might be appropriate depending on the exact dimensions of the brackets at the back of your…
Added cutouts for hex head screws and nuts to the bigger clamp. There is a small test body for the cutouts. You can change the cutout size in the fusion360 file. It's a parameter. Added a spacer for the mount, to increase the height of…
CHANGELOG: 2023-10-13: Improved the “Stepper Support - Support” part to prevent nuts rotation 2023-10-14: Reduced the global footprint and fixied various issues with the stepper support 2024-01-09: Added some holes in the “Stepper Support…
This is a simple holder for a mini 6mm laser diode module that fits into the tube of a K40/equivalent CO2 laser engraver/cutter. There are channels on the side for the laser module wires to exit the tube to connect to a battery. There is…
Update - 13th October 2020: Still have this running on my K40 over 3 years later and its working better than the original part. The pulley idler on my K40's X axis had worn away quite a bit and the belt was popping off every few jobs. I…
K40 Adapter for mirror 1 of Cloudray CO2 Laser Head Set, directly mounted before the laser tube, see here: https://www.amazon.de/gp/product/B07P1YLR2T/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 My K40 is a newer one, the holes in…
Yet another adjustable table for your K40 laser cutter from the finest material the world has ever seen: Chinesium! This adjustable bed is inspired by the table made by arion02 on Thingiverse ( https://www.thingiverse.com/thing:2299337 )…
Ich habe diesen Höhenverstellbaren Tisch in meinem K40. https://www.thingiverse.com/thing:4100163 Dafür habe ich mir 4 dieser Teile gedruckt um Sägeblätter als Tisch zu verwenden. Sägeblätter habe ich von https://amzn.to/4os4H4i und dann…
Remixed this model to be used with smaller aluminum extrusions. I cut it in half'ish, added holes to be used with M8x16 flat head screws.
This is a funnel for the K40 laser. It helps to guide the USB to the port easily. PETG or PLA works great for this print. PRINT ORIENTATION PARTS 1_Base 2_Clip Happy Printing!!
A Remix of a mount for the Logitech K400+/R. Meant to be secured using adhesive tape ~2mm thick. Added a 1.5mm recess to the backside where there aren't hexagons allowing for sufficient adhesive tape. Allows you a more flush mounting.…
Do you have loose SK40 toolholders lying around or do you change tools often and don't know for sure which tools are clamped? This model might help. Just snap the labeled clip on the toolholder and you will not only know which tool is…
This is a K40 focus tool with integrates four 5mmx5mmx2mm neodym-magnets. The source is maintained at GitHub .
My k40 have absolutely no form of dial indicator so I made this knob and dial gauge to make repeat cuts easier. I used a red oil marker to color in the line, but nail polish or whatever you have on hand is probably fine too. This is…
I picked up a cheap K40 laser and it came with casters...but I didn't like that because it's about the same size as my table and I wanted it to stay on the table not roll off. So I whipped up some replacement feet instead. The foot can be…
Air Assist / Smoke Assist / Air Nozzle for K40 Laser. Will fit on a standard 26mm OD laser Head and is held in place by two short M3 Bolts. The nozzle has an inlet port designed to fit a 6mm OD PVC tube. To make a smaller opening for the…
After we made the modular morse taper drill rack we have made a similar solution for our SK40 taper milling tools. There are versions with interlocks on 2 sides and on 4 sides to arrange as needed. If other arrangements are needed the…
The original fan duct of my K40 was so large it significantly reduced the usable work area. This solves this problem. This version is shorter, so it does not interfere with the toolhead. There seem to be different versions of the K40, so…
This is a replacement housing for the blower motor and squirrel cage from the blower unit that comes with most K40 Lasers. This housing fits properly in the slot behind the machine, takes up significantly less space, and allows access to…
This is a three-part system for venting your K40 laser to a 3". hose. All parts are removable externally for easy access and maintenance. Once you remove the old intrusive internal exhaust you can insert the new shorter one, followed by…
This is an adapter that fits in the original slot on the exhaust on a K40 Laser cutter. It prints in two parts that are held together just by friction but you can also glue them. Its made to fit a 130mm aluminum duct but you can adjust…
Simple Fusion360 sketch to align the bed height of a K40 Laser. Category: Hobby
Umbau vom K40 um von den ollen Rollen an der X Achse weg zu kommen. Hier das fertige Teil im Einsatz https://youtu.be/SnZauEWrpfU Dazu habe ich mir diese Schienen MGN12H länge 400mm bei ebay bestellt. Gibt es aber auch bei Amazon .…
K40 Laser Air Flow Magnet CAP. This CAP is designed with the plan of improving the air flow suction of the K40 laser. The magnets used are Ø6x3 mm (x5). PRINT ORIENTATION The print orientation is totally flat, whit the cavities facing up.…
Up for your printing pleasure is yet another air assist for the Chinese laser cutter. I did incorporate a boss for adding a 6 mm pneumatic elbow fitting for macro line. It has a 5mm opening for the air. 2 holes 180 apart to for holding to…
An Air Assist Nozzle for the Stock Laser Head on the K40 Laser Cutter. The aim of the project was to design and build a lamar flow laser head to increase the cutting ability of the laser. Initial testing has not been started but if you…
Fabrication d'un connecteur de courroie pour la réalisation du lit électrique de la Laser K40 2 x Vis tête bombée cylindrique à empreinte hexagonale M3*8 Product of a belt connector for the electric bed of the Laser K40 2 x Socket head…
Hi, This is my version of an Air-Assist Nozzle for the common K40 Lasercutter. It is intended for a 6mm outer dia. air hose. The 4 tiny air holes in front of the nozzle are directed a little bit into the direction of the center. Print…
3D printable laser head mount for K40 lasers and Cloudray K-Series laser head. Allows adjustment in all directions. Also allows attaching a cable rail. Light weight and all screw holes fit...
Tooltag for SK40 tool holders. For marking labels from Zoller presetting devices. Dimensions of the labeling field: 77x28mm Print Settings Printer: BamuLab X1C Rafts: No Supports: No Resolution: 0,25 Infill: 25% Filament brand: BamuLab…
Logitech K400 Billentyűzet elem fedél Vannak fen már kész modellek de ez a verzió szebben illeszkedik! Nyomtatása a képnek megfelelő tájolással! Ez egy REMIX: Dmtinkdev: Logitech k400 billentyűzet - akkufedél thing:4565631
Da ich einen Inline-Ventilator für meinen K40 habe, musste für den größtmöglichen Durchsatz jetzt der eingebaute K40 Abluftlüfter raus. Dann kann man die gesamte rechteckige Fläche nutzen. Dafür ist dieser Adapter. Print Settings Printer…
K40 laser cutter air assist bracket for 6mm hose 2x cable tie slots, I only used one of them, it was secure enough. Push a 6mm flexible air hose in the top, mount at the top of the laser head assembly and it's designed to aim about the…
Adapted flatsixguy's K400 holder into a top-mount bracket for the 22'' Wacom Cintiq (2019 version - model DTK2260K0A). Sits on top of the tablet - works best with the tablet tilted. With the tablet vertical (90 degrees upright/flat), the…
I bought a new head for my K40 laser but the diameter of the hole in the plate that holds it was too small. Since i have no tools to machine metal i designed a plate with the same thickness that fits the head. Its not perfect but fits and…
Are you also fed up with wasting time and material by cutting the wrong thickness of plate? This simple mod has saved me countless times, so therefore I will share my design here. With this mod you can easily measure material thickness on…
I made huge cleanup of K40 laser. I need to adjust laser path after that and I'd like to use a safe laser pointer for such work before I load 40W of laser power into it. So I designed these little disks for holding small laser pointer in…
This is the Ultimate upgrade for your K40 laser cutter. Increasing the cutting area almost by 2 and making laser alignment much easier. More details about this build http://www.openbuilds.com/builds/uk40ob.3988/ And dont forget to give…
This ring holds eight 5 mm white LEDs and is held in place by four cylindrical magnets (4 mm diameter, 6 mm length). It is placed around the hole between the rear compartment (that holds the laser tube) and the front compartment (that…
I used two of https://www.amazon.com/gp/product/B083SJD418/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 to make “crosshairs” for my K40. To align, use a test fire create a dot, then just rotate the lasers until the cross at the dot.
Lit motorisé pour laser K40 Un grand merci à Jean Philippe Civade pour son excellent article. Son software est très bien documenté, je n'ai eu aucun mal à l'adapter à la réalisation d'un circuit imprimé (K40_Bed_Software.zip et…
A tool to remove and replace mirrors and sometimes lenses in K40 or similar laser cutters that use 20mm fittings. You'll need two M2 screws at least 6mm in length (but longer ones work). It's set up so you can use a 17mm wrench, 6mm allen…
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: none Standard parts: DIN EN ISO 4762 - M4x10 Made for a workshop wall with holes. The distance between the holes is 15,5mm.
Mount contains screw holes for 6/32 or equivalent screws, but you can also use double-sided tape.
Inspired by the adjustable Z-bed by brianvanh I wanted to have one which can be adjusted motorized controlled by the upgraded smoothieboard in the cutter. The realized bed can move its surface up to 30mm below the lasers focus. Beside the…
Automated or manual operated Z-axis bed for K40 laser ( can be used for other purposes as well) using Nema 17 stepper motor (pancake) can be automated with ESP32 and stepper drivers , or by any other means Print Settings Printer Brand:…
Control panel for K40 laser with digital PWM electronics.
Update as of February6, 2022: Added a protection ring to keep the axle in place and to prevent flap from touching the exhaust tube. Flapdesign adjusted for clearance. See last picture. This is a simple to print and assemble check valve…
Semplice tappo per la mitica K40, stampato in TPU molto utile per evitare la propagazione dei fumi buon lavoro
This is a manual adjustable bed for the Chinese k40 co2 laser with 2020 aluminum extrusion build can build in any size needed based on how you cut your 2020 extrusions you will need 5/16-18 all thread 8x 5/16-18 nuts 5x 5/16-18 nyloc nuts…
This is an air assist nozzle for a K40 Chinese laser cutter, based on the original model by VanBot112 and the remixed version by Venomouse. I changed the air inlet so that it comes in from the side because I'm using the positioning laser…
Logitech k400 holder adapted for 4020 aluminium profile. Strong and comfortable.
Depending on how you print (in one go or separately, you may need to play with xy expansions