Terraforming Mars Colonies overlay with backplate
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
- Downloads
- 310
- Likes
- 29
- Rating
- 5
985 models
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
Backplate to install a Philips Hue Tap dial switch on top of an existing (NL) light switch in such a way that the original switch mechanism remains accessible (albeit without its plastic coverings). Similar (commercially available)…
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
Lustiges 3D-Schild für Hexenfans: „Besen – Bitte hier parken!“ Perfekt als Halloween-Deko oder witziger Blickfang an Tür, Wand oder Eingang. Einfach zu drucken und ideal als Geschenk oder Dekoidee für Zuhause. Es ist ein Mehrfarbdrucker…
I really liked the Cobra 18S quickplug base and snappable cover, but wanted to ability to customize for easy identification in the field. I often borrow from buddies, as well as lend out my own equipment, and this makes it very easy to…
This is an expansion to the very good insert from Nextlevelboardgaming: https://nextlevelboardgaming.com/product/lords-of-hellas-quickplay-box-insert/ Everything fits into the Warlord Box and the monuments fit in the basic game box. But…
I have a mix of quickplug slats and wanted matching cases for each size. This is sized down and ready to print for the Cobra 6S series and parallel quick plug slats. The board is designed to be mounted with M3 screws in this upload,…
Base Backplate Vanilla This is the the dove tail backplate, Youll use it to cad Your own tool holders and organizers for the Peg board/Wall mount MODULA system. Included are 1x single backplate and 2x 3x 4x for larger tool holders. There…
This is a replacement for your Ekster Cardholder backplate. It is 0.5mm thicker than the original aluminium backplate to give it some stability. Note that this will not block RFID, this can be great if you store an access card and don't…
This is a simple set of corner pieces for stylish extension arms for a lalmp above any workbench, desk, countertop,… The corner pieces are connected with aluminium 15x15 square tubing and a cable way is included in the diagonal piece.…
Man kann in dem Halter bis zu 5 Druckplatten lagern.
I have a mix of quickplug slats and wanted matching cases for each size. This is scaled up and ready to print for the Cobra 36S series and parallel quick plug slats. The board is designed to be mounted with M3 screws in this upload,…
This small rugged phone has a nice rubber case built-in, but the fancy backplate is unfortunately glass. As expected it got spider web cracks in the first year and later chips of glass started to drop from it. So there was no other…
A Gridfinity 1x2 bin sparkplug holder metric for 1-2" drive ratchet The socket holder uses a gridfinity 1x2 bin. Its made for metric spark plug sockets 16 and 22mm. Used with 1/2" drive ratchet. Print standing with 10-20% gyroid/grid…
Fixture for milling flats on a backplate for a k11-100 chuck. Jig helps to position the backplate in the vise at to the corrrect angle. 2 x 2 flats are needed to hold the chuck in the vise or to mount it on a rotary table.
My dimmer nobs have very flimsy plastic sticks which are squeezed around a plastic stick which controls lights. Several times the thin sticks break (if you tilt the nob by using it a bit more forcefully). The solution is to print small…
I was building a NAS out of a Thinkstation M920Q and the ASM1166 card was touching some metal when inserted into the PCI-E slot. So I designed a snap on isolating backplate. It holds itself on purely by friction. If you want it to be held…
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
I made this Backplate for AMD AM4 Platform. The Model is like the Original. You can Print this in PETG, but i really recommend any Carbon Fiber Filament, like PETG-CF, PLA-CF or ASA-CF/ABS-CF. The holes dont have a thread, its because if…
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is…
This design is a modular HDD rack system that allows for flat printing and can be assembled in any number of drives you'd like. I've also designed a backplane to allow for hot swapping of drives and outputs to a SFF-8087 connector to…
This is a 5015 fan inlet for EVA 3 where the fan is oriented parallel to the backplate. Use this part if you have not enough space in the back of your printer for the new fan orientation of EVA 3. Print one of the three arms to attach the…
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
Eine Klemme für die Abdeckplane unseres Pools. Gedruckt in PETG A clamp / clip for the pool cover. Printed in PETG
After 15 years the cover plates of the ventilation slots of our Internorm windows slowly begin to crumble. With this object you can replace the original plates, the outer dimensions are identical. (Nach 15 Jahren beginnen langsam die…
Holder for three Steelsheets , Mountpoints down on the long side off the Enclosure (left, middle, right). Druckplattenhalter für drei Druckplatten, anbau position unten(lange seite)links,rechts und mitte.
Support may be neccesary, depending on how well tuned your bridging setting are. There is a little breakaway support, and the parts should be printed in the same oriëntation as they load in the slicer. They are only compatible with…
Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each…
Uses 4 M3x15mm bolts 4 M3 nuts 4 M3 washers (optional) The backplate has a second version which doesn't require supports and will bridge the overhang instead Consider rotating the retention mount for better strength. That will instead…
Airsoft only non functional install like normaly we spac swap backplaye
This Backplate / Bracket provides protection from accidentally hitting the two exposed buttons on the side of the device while also giving you a place to hook a carabiner or cord for easier carrying. The bracket was designed to contour…
This is a 1:1 replacement model for a Shure sm7b backplate. Feel free to edit it with your custom logo! Category: Replacement Parts
This is a very simple design for my WE glock 19, but should be compatible with most other glock models. It can be used as a replacement or as a base for custom rear mounted charging handles
Improvements Version 2 is a redesign with the feedback I've received on version 1 over the past year. Some of the improvements made are: Back plane support (28mm, 29mm or 30mm) Hot-swap snap fit, as opposed to the heat set insert mount of…
5 drive backplane is the main part. I printed mine with 25% infill and 5 walls, so it is mostly solid walls for strength. I recently added the 3 drive backplane. It does require trimming one of the square pegs on the 5 drive cage that…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…
I wanted to mount my Xiaomi Mi Light Bar controller under my table, but unfortunately, there was no screw holes in the original base. You need to print: 1pcs Base 3pcs Clips Printed with .4 nozzle at .2 layer height in PETG. However, even…
X carriage and Microswiss clone models Printed them to mock up the hot end cooling I was developing. Matches my E3 Pro perfectly Built in, cut-away support for the nozzle Category: 3D Printer Parts
It took me some time, but I finally finished my next tabletop plant: This one is rather massive. Its main features are the large arched frame, the sickle-shaped inner leaf/web/sail and the big, tooth-like front thorn. Not sure if it is…
Edit https://www.thingiverse.com/thing:3080514 for stock fan (wraith stealth cooler) AMD ryzen 5 2600 or other ? Print instructions Unassociated tags: Stock fan amd am4, wratch stealth Category: Computer Summary Edit…
UPDATE: I slightly tweaked the HDD baseplane, now the hdd slides perfectly. Every tenth of a millimeter counts. UPDATE 2: I modified the HDD part and removed the extrusion. I uploaded the full fusion 360 file under the name v2.1, and the…
Z390-A PRO MSI SHIELD BACKPLATE. I bought the motherboard as used, backplate was missing. I found a similar one somewhere, and edited in Windows 3D builder in a few minutes. The 3rd variation was a charm :) Check our Youtube channel:…
A battery cover for Philips remote. Not sure of the remote name but seems to be BRC0884402/01 Replace Remote Control -VINABTY BRC0884402 01 TV. I use the remote with my philips 50pus6704/12 tv. The design can be improved in multiple…
Halter für 6, 4 und 2 Druckplatten. Die Zwischenräume für die Druckplatten sind 3 mm breit. Ich benutze 1,5 mm FR4 Platten mit Magnetfolie das sind insgesamt 2,2 mm Die größte Druckplatte auf den Bildern ist 360 x 360 mm groß. Damit steht…
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
Starter kit for modeling your own Ender 3 Neo shroud. (took a lot to find.) Big thanks to everyone who supplied the files for this. (NOTES) You must orient this to your personal measurements. This is not oriented dimensionally together…
Halter für 5 Druckplatten 120 x 120 mm Ideal für den kleinen Voron zero bzw. 0.1 Die Zwischenräume für die Druckplatten sind 2,5 mm breit. Sehr praktisch, wenn man verschiedene Druckplatten hat. Wer den Halter ein bisschen größer braucht:…
Wandhalterung für Druckplatten des AnkerMake M5. Die Halterung kann 5 der PEI Druckplatten aufnehmen.
HDD Enclosure with Backplane This enclosure offers 8 bays for 3.5" drives. Backplane used Supermicro SAS825TQ(other backplanes might work but this model was created with this one in mind) Compatible caddies: My Remix of the Dell Server…
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
Not an exact copy of the original but fits fine. I printed mine using 85 harness tpu and it feels pretty close to the original
~ UPDATE: 08/08/2024 ~ Added a v3, easier nut catch more sturdy side mounting options. V3 has three options. Top mounted, Double mounted and bottom mounted. If you're going to use the Top mounted or Double mounted options, you will need…
Remixed backplate to add extra strength, holes for nylock m3 nuts, and flush cap head screws for the linear rail.
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
Making spare parts is fun and rewarding. I made this part since i needed it, I remember i've found similar parts before, but none seems to fit my old tripod. I hope you enjoy it! Measurements: width: 52.4mm (2.06") Depth(largest): 42.7mm…
tsuga's sprite pro CR touch mount was a great design, but on the ender 3 v2 when the x axis was home'ing it would slam into the x endstop cover. So I moved the CR touch mount forward by -4mm's. This does mean it's no longer a zero offset…
This is an improved version of my original enclosure. The honeycombs of the enclosure can be broken out if desired. Supports are not absolutely necessary, but I have used some on the housing for the guide grooves and on the fan holder. In…
Einfach altes Teil abmessen, passende Abdeckung mit 2x Scheibe ausdrucken.
Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…
I installed a front-idler tensioner mod on my RatRig VCore3, and wanted to remove the pesky backplate tensioners from my carriage, so I whipped this super simple version up in OnShape. Literally just flattened out the backplate, and…
This is a magnetic backplate for a Voron V0.2 that replaces only the lower rear panel. It can be printed on a voron 0.2 itself and fastens together with clamps. Depending on your printer, some tolerances might be too tight and need some…
Note: Here are some remixes that works better than this model, so maybe download from there? Remix by NoWarrenty on Printables Additional features joinable with edge and corner connector pieces built-in screwholes comes with more sizes…
Zahlen 0-9 für Haus Nr. / Zimmer Nr. / Parkplatz Nr. o. ähnlich. für jede Zahl werden noch 2 Stück Holzschrauben ( am besten “ Linsen-senk ”) benötigt. Im Maßstab 100% sollten es Schrauben mit einem Schaft-Durchmesser von 2 bis 2,2 mm…
@ALX_1707 Had made an awesome kitchen thingie. I just needed to edit it a bit for a better view to text. Now I don't need to kneel in front of my dishwasher to see whether there's dirty or clean stuff inside. kudos @ALX_1707
Anschlag für die Druckplatte für ein leichtes und richtiges einlegen. Einfach mit Sekundenkleber an die Ecken von unten ankleben.
New Version Here This is a drop-in replacement for the Bosch 12V charger (GAL12V-20) that adds two slots for wall mount screws. This mod only requires a Philips screw driver – simply remove the two screws on the existing backplate and…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
AM4 Backplate for Ryzen CPU AMD Motherboards use ABS or other High Temp Material do not print in PLA. You also need some screws depending on your cooler, also use a light one.
Printing Instructions Print on it's flat face without supports, just remove and tidy up the single sacrificial layer where the screws go, a sharp knife is a good tool for the job. I printed mine in black Prusament PETG on the Prusa Mini…
I wanted to create a Power Bank in a very thin box, and designed a specific battery connection holder and a backplate cable guiding, all in 39,2 mm tall. Read the document for full specs and instructions. Hope you like it! Note: feel free…
Drehsitz Abdeckplatten Um nicht immer in die großen Löcher der Drehsitzplatten auf Batterien und EBL zu schauen, habe ich diese Abdeckplatten erstellt. 1 x ohne "Kühlschlitze" für den Beifahrersitzt (Batterien) und 1 x für den Fahrersitz…
This should help to align the PEI sheet with the printbed.
I remixed this case because I needed to add more space for the backplate cooler ( https://www.aliexpress.com/item/1005006009318799.html ) and wasn't satisfied with the other remixes out there. Based on some other comments on the other…
I love the blinking owl key holder, but the original does not have a good way of attaching the part to the wall (except double-sided tape maybe). This is just a simple cutout for mounting with one small screw. Please note that the…
Backplates (to customize) for attaching tools to peg boards. Designed for peg boards with 1in hole spacing, 1/4in holes, 7/32 thick. Three configurations: 2x2, 3x2 and 5x3 Best print orientation is upside down.
Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system. 1. Two original landing sizes - square 50x50mm and square 85.6x85.6mm. For M3 screws, for M4 you'll need to drill mount for head probably. You can use these mounting…
Remix of UL G203 by K4mi1, Made the pegs bigger because they were breaking on me and added a screw-less version. Flip it 180 degrees so the pegs are pointing up, use tree support, use either 10% or 100% fill. Sand until the palm grip is…
Rear plate for voron 0.2 with 120mm fan
HYTE Y60 Horizontal GPU mounting bracket. Requires cutting of case and drilling holes in case metal to install. Designed to allow for horizontal GPU mounting inside of the HYTE Y60 case for better airflow and cooling. ONLY FITS Y60 CASE!…
4/20/25 update: Added new variant with removable battery compartment plate. Use two M3 heatserts and two M3 6mm flat head screws. 6/16 Update: Added to project parts list in below description. Uploaded beta version of battery pack version…
I made yet another 2.5" to 3.5" form factor disk adapter. This one is primarily intended to be placed into 3.5" HDD hot swap bays, which can commonly be found in many server chassis or even midi or big tower configurations. It is designed…
Wanted a backplate for my Nest Thermostat to cover up the holes left from my previous older thermostat but I didnt like the large ones that Google sold that felt like they dwarfed the Nest. My version covers any holes within a diameter of…
If your printer is too loud, you have now the possibility to use the silent mod from my video. The noise comes from the rear cover and its 4010 fan. Step 1: choose the preferred fan mod. either the 4020 blower fan or the 6015 axial fan…
I made a backplate for the original model. Enjoy the extra storagespace
Remix Information Modifications to the "Wandering Hour Clock" by clockspot Most details are included here but for full build details see my web page for this clock. Geneva Drive Clock…
The new gantry adapter works with the official creality linear rails kit that comes with a new backplate and 4 bolts. Creality rail kit for ender 3 You have to use both model for this to work as both have been adapted to work toggether.
After some of the screws coming lose with heavy repeated use, I wanted to try threaded inserts in the backplate to hopefully make it a bit more robust. I found this really helps the tension screw and allows you to add more tension then…
After my last move these hooks were broken, so I had to make a few of them in order to assemble my wardrobe again. Working very well, better than the original ones. Uses minimal supports, done by painting them in PrusaSlicer. I usually…
This is a modular hexagonal shelf design for displaying Goodsmile Nendoroid figures. With these shelves it's no longer necessary to use the clear plastic stand that comes with most nendoroids, just insert the arm that holds the nendoroid…
These bushings can easily crack or become damaged due to extensive use over time. This model is an easy replacement. The model is the fairly common 18/20mm Ø. The ones in the pictures are printed using Esun PLA+, with the regular 0.2…
Socket 115x replacement backplate for Dell coolers that normally mount directly into the case. This part prints fine with 20% infill and 4 outer walls for extra strength. PLA should be fine temperature-wise, but more a heat resistant…
Nothing special; Just for convenience I removed the text on the insert plate for the user to customize via the slicer. Saving a few seconds of time making a blank one yourself ;) *All credit goes to lowlandet for their design and…
Um das Regenwasser von der Plane ablaufen zu lassen, festfrieren der Poolabdeckung an der Wasseroberfläche zu verhindern und somit die Lebensdauer der Plane zu erhöhen, habe ich die Unterkonstruktion mit 20 mm Elektroinstallionsrohren…
I received an old AM3+ motherboard and processor with its backplate and retention brackets missing. The latter I could find here. Sadly I found no suitable backplate so I whipped out Fusion and made one. I recommend you to print with…
2U 10-inch Rack Blankplate